[2018-01-12 17:53:27.706] ** STARTING RUN QuantaSoft Version 1.7.4.0917 **
[2018-01-12 17:49:01.573] (Detector                         :  17) @Stop
[2018-01-12 17:53:31.846] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 17:53:31.846] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 17:53:31.846] (MainPre Routine                  :   0) @Run
[2018-01-12 17:53:31.846] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 17:53:36.326] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 17:53:36.326] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 17:53:36.326] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 17:53:37.026] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 17:53:37.026] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 17:53:37.076] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 17:53:38.906] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 17:53:38.906] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 17:53:38.906] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 17:53:38.946] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 17:53:38.996] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 17:53:39.106] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 17:53:39.356] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 17:53:39.356] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 17:53:39.356] (Initialize P1                    :   3) @Run
[2018-01-12 17:53:39.356] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 17:53:39.406] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 17:53:39.406] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 17:53:39.406] (Initialize P2                    :   4) @Run
[2018-01-12 17:53:39.406] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 17:53:39.586] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:39.816] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:39.936] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:53:39.986] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:39.986] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:40.036] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:53:40.086] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:40.086] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:40.276] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:53:40.326] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:40.326] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:40.376] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:53:40.426] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:40.426] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:40.476] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:53:40.526] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:40.526] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:40.576] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:53:40.626] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:40.626] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:40.676] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:53:40.726] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:40.726] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:40.776] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:53:40.826] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:40.826] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:40.896] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:53:40.946] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:40.946] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:41.136] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:53:41.186] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:41.186] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:41.236] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:53:41.286] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:41.286] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:41.336] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:53:41.386] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:41.386] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:41.436] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:53:41.486] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:41.486] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:41.536] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:53:41.586] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:41.586] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:41.636] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:53:41.686] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:41.686] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:41.756] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:53:41.806] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:41.806] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:41.996] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:53:42.046] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 17:53:42.046] (Initialize P1                    :   3) Stop routine
[2018-01-12 17:53:42.046] (Initialize P1                    :   3) @Stop
[2018-01-12 17:53:42.096] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:53:42.146] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:53:42.146] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:42.246] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:53:42.296] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 17:53:42.296] (Initialize P2                    :   4) Stop routine
[2018-01-12 17:53:42.296] (Initialize P2                    :   4) @Stop
[2018-01-12 17:53:42.406] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 17:53:42.606] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 17:53:42.606] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 17:53:42.606] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 17:53:42.606] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 17:53:42.606] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 17:53:42.606] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:42.606] (PreFillP1                        :   6) @Run
[2018-01-12 17:53:42.606] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 17:53:42.656] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 17:53:42.656] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 17:53:42.656] (PreFillP2                        :   7) @Run
[2018-01-12 17:53:42.656] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 17:53:42.756] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:43.026] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:43.076] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:43.076] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:43.246] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:43.296] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:43.296] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:43.586] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:43.636] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:43.636] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:43.886] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:43.936] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:43.936] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:44.086] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:44.136] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:44.136] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:44.306] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:44.356] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:44.356] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:44.646] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:44.696] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:44.696] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:44.846] (PreFillP1                        :   6) @Stop
[2018-01-12 17:53:44.946] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:44.996] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 17:53:44.996] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:45.146] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:45.196] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:53:45.196] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:45.406] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:45.456] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:53:45.456] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:45.606] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:45.656] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:53:45.656] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:45.756] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:45.806] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:53:45.806] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:45.956] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:46.006] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:53:46.006] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:46.216] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:46.266] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 17:53:46.266] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 17:53:46.266] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 17:53:46.306] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 17:53:46.316] (PreFillP2                        :   7) @Stop
[2018-01-12 17:53:46.356] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 17:53:46.356] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 17:53:46.356] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 17:53:46.376] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:46.426] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 17:53:46.446] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 17:53:46.696] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 17:53:46.696] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:46.696] (Flush Capillary                  :   9) @Run
[2018-01-12 17:53:46.696] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 17:53:46.746] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 17:53:46.746] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 17:53:46.746] (Flush Singulator                 :  10) @Run
[2018-01-12 17:53:46.746] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 17:53:46.846] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:47.096] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:47.146] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:47.146] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:47.296] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:47.346] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:47.346] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:47.516] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:47.566] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:47.566] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:47.856] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:47.906] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:47.906] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:48.156] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:48.206] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:48.206] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:48.356] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:48.406] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:48.406] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:48.716] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:48.766] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:48.766] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:48.816] (Flush Capillary                  :   9) @Stop
[2018-01-12 17:53:48.916] (Flush Singulator                 :  10) @Stop
[2018-01-12 17:53:49.016] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:49.066] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:53:49.066] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:49.166] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:49.216] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:53:49.216] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 17:53:49.216] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 17:53:49.256] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 17:53:49.346] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 17:53:49.346] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 17:53:49.346] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 17:53:49.366] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:49.416] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 17:53:49.436] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 17:53:49.686] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 17:53:49.686] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:49.686] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 17:53:49.686] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 17:53:49.736] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 17:53:49.736] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 17:53:49.736] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 17:53:49.736] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 17:53:49.836] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:50.126] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:50.176] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:50.176] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:50.466] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:50.516] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:50.516] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:50.666] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:50.716] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:50.716] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:50.866] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:50.916] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:50.916] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:51.086] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:51.136] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:51.136] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:51.186] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 17:53:51.426] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:51.476] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:53:51.476] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:51.526] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 17:53:51.626] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:51.676] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:53:51.676] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 17:53:51.676] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 17:53:51.696] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 17:53:51.696] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 17:53:51.696] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 17:53:51.696] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 17:53:51.696] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 17:53:51.696] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 17:53:51.696] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:51.696] (PreFillP1                        :   6) @Run
[2018-01-12 17:53:51.696] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 17:53:51.746] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 17:53:51.746] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 17:53:51.746] (PreFillP2                        :   7) @Run
[2018-01-12 17:53:51.746] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 17:53:51.846] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:52.136] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:52.186] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:52.186] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:52.476] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:52.526] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:52.526] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:52.676] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:52.726] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:52.726] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:52.876] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:52.926] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:52.926] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:53.096] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:53.146] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:53.146] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:53.436] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:53.486] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:53.486] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:53.736] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:53.786] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:53:53.786] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:53.936] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:53.986] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 17:53:53.986] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:54.036] (PreFillP1                        :   6) @Stop
[2018-01-12 17:53:54.156] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:54.206] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:53:54.206] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:54.496] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:54.546] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:53:54.546] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:54.696] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:54.746] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:53:54.746] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:54.846] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:54.896] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:53:54.896] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:55.046] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:55.096] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:53:55.096] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:55.306] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:53:55.356] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 17:53:55.356] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 17:53:55.356] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 17:53:55.396] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 17:53:55.406] (PreFillP2                        :   7) @Stop
[2018-01-12 17:53:55.446] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 17:53:55.446] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 17:53:55.446] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 17:53:55.466] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:55.516] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 17:53:55.536] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 17:53:55.786] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 17:53:55.786] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:55.786] (Flush Capillary                  :   9) @Run
[2018-01-12 17:53:55.786] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 17:53:55.836] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 17:53:55.836] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 17:53:55.836] (Flush Singulator                 :  10) @Run
[2018-01-12 17:53:55.836] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 17:53:55.936] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:56.187] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:56.237] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:56.237] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:56.387] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:56.437] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:56.437] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:56.607] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:56.657] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:56.657] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:56.947] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:56.997] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:56.997] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:57.247] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:57.297] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:57.297] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:57.447] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:57.497] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:57.497] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:57.667] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:57.717] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:57.717] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:58.007] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:58.057] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:53:58.057] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 17:53:58.107] (Flush Singulator                 :  10) @Stop
[2018-01-12 17:53:58.207] (Flush Capillary                  :   9) @Stop
[2018-01-12 17:53:58.307] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:53:58.357] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:53:58.357] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 17:53:58.357] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 17:53:58.397] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 17:53:58.417] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 17:53:58.417] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 17:53:58.417] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 17:53:58.457] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:58.507] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 17:53:58.617] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 17:53:58.867] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 17:53:58.867] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:58.867] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 17:53:58.867] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 17:53:58.917] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 17:53:58.917] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 17:53:58.917] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 17:53:58.917] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 17:53:59.017] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:59.287] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:59.337] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:59.337] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:59.647] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:59.697] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:59.697] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:53:59.947] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:53:59.997] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:53:59.997] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:54:00.147] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:54:00.197] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:54:00.197] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:54:00.367] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:54:00.417] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:54:00.417] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:54:00.467] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 17:54:00.707] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:54:00.757] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:54:00.757] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:00.807] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 17:54:00.907] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:54:00.957] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:54:00.957] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 17:54:00.957] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 17:54:00.967] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 17:54:00.967] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 17:54:00.967] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 17:54:00.967] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 17:54:00.967] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 17:54:00.967] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 17:54:00.967] (Prefill before Flush             :  14) @Run
[2018-01-12 17:54:00.967] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 17:54:00.967] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 17:54:00.967] (PreFillP1                        :  15) @Run
[2018-01-12 17:54:00.967] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 17:54:01.017] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 17:54:01.017] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 17:54:01.017] (PreFillP2                        :  16) @Run
[2018-01-12 17:54:01.017] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 17:54:01.117] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 17:54:01.407] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 17:54:01.457] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:01.457] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 17:54:01.647] (PreFillP1                        :  15) @Stop
[2018-01-12 17:54:01.747] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 17:54:01.797] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 17:54:01.797] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:01.847] (PreFillP2                        :  16) @Stop
[2018-01-12 17:54:01.947] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 17:54:01.997] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 17:54:01.997] (Prefill before Flush             :  14) Stop routine
[2018-01-12 17:54:01.997] (Prefill before Flush             :  14) @Stop
[2018-01-12 17:54:02.017] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 17:54:02.037] (MainPre Routine                  :   0) Stop routine
[2018-01-12 17:54:02.037] (MainPre Routine                  :   0) @Stop
[2018-01-12 17:49:01.573] (Detector                         :   2) @Stop
[2018-01-12 17:54:02.417] ** STARTING B01 MAIN ROUTINE **
[2018-01-12 17:54:02.417] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 17:54:02.417] (Main Well                        :   0) @Run
[2018-01-12 17:54:02.417] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 17:54:02.417] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 17:54:02.417] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 17:54:02.417] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 17:54:02.427] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 17:54:02.427] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 17:54:02.427] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 17:54:02.427] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 17:54:02.427] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 17:54:02.427] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 17:54:02.927] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 17:54:02.927] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 17:54:02.977] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 17:54:03.087] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 17:54:03.087] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 17:54:03.087] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 17:54:03.087] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 17:54:03.087] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 17:54:03.087] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 17:54:03.087] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 17:54:03.087] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 17:54:03.087] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 17:54:03.087] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 17:54:03.107] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:54:03.157] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 17:54:03.177] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 17:54:03.427] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 17:54:03.427] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:54:03.427] (PreWet Tip from P2               :  19) @Run
[2018-01-12 17:54:03.427] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 17:54:03.477] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 17:54:03.477] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 17:54:03.477] (PreWet Tip from P1               :  20) @Run
[2018-01-12 17:54:03.477] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 17:54:03.577] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:54:03.847] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:54:03.897] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 17:54:03.897] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:54:04.207] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:54:04.257] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 17:54:04.257] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:54:04.507] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:54:04.557] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 17:54:04.557] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:54:04.707] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:54:04.757] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 17:54:04.757] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:54:04.807] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 17:54:04.927] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:54:04.977] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 17:54:04.977] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:05.027] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 17:54:05.267] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:54:05.317] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 17:54:05.317] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 17:54:05.317] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 17:54:05.317] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 17:54:05.317] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 17:54:05.377] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:54:05.427] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 17:54:05.487] (Main Well                        :   0) Move to Well 13 with z-offset of 2540 um (Wait)
[2018-01-12 17:54:07.987] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:54:08.227] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:54:08.277] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 17:54:08.277] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:08.377] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:54:08.427] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 17:54:08.427] (Main Well                        :   0) Stop Pump
[2018-01-12 17:54:08.467] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 17:54:08.527] (Main Well                        :   0) Move to Well 13 with z-offset of 310 um (Wait)
[2018-01-12 17:54:16.877] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:17.117] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:54:17.167] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 17:54:17.167] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 17:54:17.167] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 17:54:17.167] (Pickup Sample                    :  21) @Run
[2018-01-12 17:54:17.167] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 17:54:21.837] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 17:54:24.097] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 17:54:24.177] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 17:54:24.377] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:24.477] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:24.527] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:24.527] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:24.627] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:24.677] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:24.677] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:24.777] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:24.827] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:24.827] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:24.937] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:24.987] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:24.987] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:25.177] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:25.227] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:25.227] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:25.327] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:25.377] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:25.377] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:25.477] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:25.527] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:25.527] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:25.627] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:25.677] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:25.677] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:25.887] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:25.937] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:25.937] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:26.037] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:26.087] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:26.087] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:26.187] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:26.237] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:26.237] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:26.337] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:26.387] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:26.387] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:26.597] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:26.647] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:26.647] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:26.747] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:26.797] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:26.797] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:26.897] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:26.947] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:26.947] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:27.047] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:27.097] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:27.097] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:27.307] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:27.357] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:27.357] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:27.457] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:27.507] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:27.507] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:27.607] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:27.657] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:27.657] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:27.757] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:27.807] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:27.807] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:28.017] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:28.067] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:28.067] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:28.167] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:28.217] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:28.217] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:28.317] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:28.367] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:28.367] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:28.467] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:28.517] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:28.517] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:28.727] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:28.777] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:28.777] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:28.877] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:28.927] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:28.927] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:29.027] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:29.077] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:29.077] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:29.177] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:29.227] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:29.227] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:29.437] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:29.487] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:29.487] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:29.587] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:29.637] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:29.637] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:29.737] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:29.787] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:29.787] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:29.887] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:29.937] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:29.937] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:30.147] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:30.197] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:30.197] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:30.297] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:30.347] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:30.347] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:30.447] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:30.497] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:30.497] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:30.597] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:30.647] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:30.647] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:30.857] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:30.907] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:30.907] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:31.007] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:31.057] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:31.057] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:31.157] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:31.207] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:31.207] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:31.307] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:31.357] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:31.357] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:31.567] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:31.617] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:31.617] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:31.717] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:31.767] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:31.767] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:31.867] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:31.917] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:31.917] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:32.017] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:32.067] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:32.067] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:32.277] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:32.327] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:32.327] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:32.427] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:32.477] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:32.477] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:32.577] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:32.627] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:32.627] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:32.727] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:32.777] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:32.777] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:32.987] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:33.037] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:33.037] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:33.137] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:33.187] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:33.187] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:33.287] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:33.337] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:33.337] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:33.437] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:33.487] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:54:33.487] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:54:33.697] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:33.747] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 17:54:33.747] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 17:54:33.847] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:54:33.897] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 17:54:33.897] (Pickup Sample                    :  21) Stop routine
[2018-01-12 17:54:33.897] (Pickup Sample                    :  21) @Stop
[2018-01-12 17:54:34.167] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 17:54:34.277] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 17:54:34.527] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 17:54:34.547] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:54:34.597] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 17:54:34.597] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 17:54:34.597] (Singulate Sample                 :  22) @Run
[2018-01-12 17:54:34.597] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 17:54:34.597] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 17:54:34.597] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 17:54:34.657] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 17:54:34.707] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 17:54:34.767] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 17:54:34.867] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_B01_RAW.qlb"
[2018-01-12 17:54:34.977] (Detector                         :   2) @Run
[2018-01-12 17:54:34.977] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 17:55:14.879] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 17:55:15.689] (Detector                         :   2) @Stop
[2018-01-12 17:55:15.879] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 17:55:15.879] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 17:55:15.999] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 17:55:16.049] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 17:55:16.049] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:16.149] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 17:55:16.199] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 17:55:16.199] (Singulate Sample                 :  22) Stop routine
[2018-01-12 17:55:16.199] (Singulate Sample                 :  22) @Stop
[2018-01-12 17:55:16.599] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 17:55:16.599] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 17:55:16.599] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 17:55:16.599] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 17:55:16.599] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 17:55:16.599] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 17:55:16.599] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:16.599] (PreFillP1                        :  24) @Run
[2018-01-12 17:55:16.599] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 17:55:16.649] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 17:55:16.649] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 17:55:16.649] (PreFillP2                        :  25) @Run
[2018-01-12 17:55:16.649] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 17:55:16.749] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:17.019] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:17.069] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:55:17.069] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:17.239] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:17.289] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:55:17.289] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:17.579] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:17.629] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:55:17.629] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:17.879] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:17.929] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:55:17.929] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:18.079] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:18.129] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:55:18.129] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:18.299] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:18.349] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:55:18.349] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:18.639] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:18.689] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:55:18.689] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:18.939] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:18.989] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:55:18.989] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:19.139] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:19.189] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:55:19.189] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:19.359] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:19.409] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:55:19.409] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:19.699] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:19.749] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 17:55:19.749] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 17:55:19.799] (PreFillP1                        :  24) @Stop
[2018-01-12 17:55:19.999] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:20.049] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:55:20.049] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 17:55:20.149] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:20.199] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:55:20.199] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 17:55:20.369] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:55:20.419] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 17:55:20.419] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 17:55:20.419] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 17:55:20.449] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 17:55:20.449] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 17:55:20.449] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 17:55:20.609] (PreFillP2                        :  25) @Stop
[2018-01-12 17:55:20.629] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:55:20.679] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 17:55:20.699] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 17:55:20.949] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 17:55:20.949] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:55:20.949] (Flush Capillary                  :  27) @Run
[2018-01-12 17:55:20.949] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 17:55:20.999] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 17:55:20.999] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 17:55:20.999] (Flush Singulator                 :  28) @Run
[2018-01-12 17:55:20.999] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 17:55:21.099] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:21.529] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:55:21.579] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:55:21.579] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:21.829] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:55:21.879] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:55:21.879] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:22.029] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:55:22.079] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:55:22.079] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:22.249] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:55:22.299] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:55:22.299] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:22.349] (Flush Capillary                  :  27) @Stop
[2018-01-12 17:55:22.589] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:55:22.639] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:55:22.639] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 17:55:22.689] (Flush Singulator                 :  28) @Stop
[2018-01-12 17:55:22.789] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:55:22.839] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:55:22.839] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 17:55:22.839] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 17:55:22.849] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 17:55:22.869] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 17:55:22.869] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 17:55:22.869] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 17:55:22.889] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 17:55:22.939] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 17:55:22.959] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 17:55:23.209] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 17:55:23.209] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 17:55:23.209] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 17:55:23.209] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 17:55:23.259] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 17:55:23.259] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 17:55:23.259] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 17:55:23.259] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 17:55:23.359] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:23.629] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 17:55:23.679] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:55:23.679] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:23.849] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 17:55:23.899] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:55:23.899] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:24.189] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 17:55:24.239] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:55:24.239] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 17:55:24.289] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 17:55:24.389] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 17:55:24.489] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 17:55:24.539] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:55:24.539] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 17:55:24.539] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 17:55:24.569] (Main Well                        :   0) Stop Pump
[2018-01-12 17:55:24.609] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 17:55:24.609] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 17:55:24.609] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 17:55:24.649] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 17:55:24.699] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 17:55:24.809] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 17:55:25.059] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 17:55:25.059] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 17:55:25.059] (Flush Capillary                  :  33) @Run
[2018-01-12 17:55:25.059] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 17:55:25.109] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 17:55:25.109] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 17:55:25.109] (Flush Singulator                 :  34) @Run
[2018-01-12 17:55:25.109] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 17:55:25.209] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:25.479] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 17:55:25.529] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:55:25.529] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:25.839] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 17:55:25.889] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:55:25.889] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 17:55:25.939] (Flush Singulator                 :  34) @Stop
[2018-01-12 17:55:26.039] (Flush Capillary                  :  33) @Stop
[2018-01-12 17:55:26.139] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 17:55:26.189] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:55:26.189] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 17:55:26.189] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 17:55:26.209] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 17:55:26.229] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 17:55:26.229] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 17:55:26.229] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 17:55:26.249] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 17:55:26.299] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 17:55:26.429] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 17:55:26.679] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 17:55:26.679] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 17:55:26.679] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 17:55:26.679] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 17:55:26.729] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 17:55:26.729] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 17:55:26.729] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 17:55:26.729] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 17:55:26.829] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:27.109] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 17:55:27.159] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:55:27.159] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 17:55:27.469] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 17:55:27.519] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:55:27.519] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 17:55:27.569] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 17:55:27.669] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 17:55:27.769] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 17:55:27.819] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:55:27.819] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 17:55:27.819] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 17:55:27.829] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 17:55:27.849] (Main Well                        :   0) Stop routine
[2018-01-12 17:55:27.849] (Main Well                        :   0) @Stop
[2018-01-12 17:55:28.219] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 17:55:28.219] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 17:55:28.219] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 17:55:28.219] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 17:55:28.219] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 17:55:28.219] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 17:55:30.219] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 17:55:30.219] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 17:55:30.219] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 17:55:30.219] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 17:55:30.259] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 17:55:30.259] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 17:55:15.689] (Detector                         :  17) @Stop
[2018-01-12 17:56:15.851] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 17:56:15.851] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 17:56:15.851] (MainPre Routine                  :   0) @Run
[2018-01-12 17:56:15.851] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 17:56:21.941] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 17:56:21.941] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 17:56:21.941] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 17:56:22.581] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 17:56:22.581] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 17:56:22.591] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 17:56:24.321] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 17:56:24.321] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 17:56:24.321] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 17:56:24.481] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 17:56:24.531] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 17:56:24.551] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 17:56:24.801] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 17:56:24.801] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 17:56:24.801] (Initialize P1                    :   3) @Run
[2018-01-12 17:56:24.801] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 17:56:24.851] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 17:56:24.851] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 17:56:24.851] (Initialize P2                    :   4) @Run
[2018-01-12 17:56:24.851] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 17:56:25.031] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:25.261] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:25.381] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:56:25.431] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:25.431] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:25.481] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:56:25.531] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:25.531] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:25.721] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:56:25.771] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:25.771] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:25.821] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:56:25.871] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:25.871] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:25.921] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:56:25.971] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:25.971] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:26.021] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:56:26.071] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:26.071] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:26.121] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:56:26.171] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:26.171] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:26.221] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:56:26.271] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:26.271] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:26.341] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:56:26.391] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:26.391] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:26.581] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:56:26.631] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:26.631] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:26.681] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:56:26.731] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:26.731] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:26.781] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:56:26.831] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:26.831] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:26.881] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:56:26.931] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:26.931] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:26.981] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:56:27.031] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:27.031] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:27.081] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:56:27.131] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:27.131] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:27.201] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:56:27.251] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:27.251] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:27.441] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:56:27.491] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:27.491] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:27.541] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:56:27.591] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:56:27.591] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:27.641] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:56:27.691] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 17:56:27.691] (Initialize P1                    :   3) Stop routine
[2018-01-12 17:56:27.691] (Initialize P1                    :   3) @Stop
[2018-01-12 17:56:27.741] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:56:27.791] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 17:56:27.791] (Initialize P2                    :   4) Stop routine
[2018-01-12 17:56:27.791] (Initialize P2                    :   4) @Stop
[2018-01-12 17:56:28.051] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 17:56:28.251] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 17:56:28.271] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 17:56:28.271] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 17:56:28.271] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 17:56:28.271] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 17:56:28.271] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:28.271] (PreFillP1                        :   6) @Run
[2018-01-12 17:56:28.271] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 17:56:28.321] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 17:56:28.321] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 17:56:28.321] (PreFillP2                        :   7) @Run
[2018-01-12 17:56:28.321] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 17:56:28.421] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:28.691] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:28.741] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:28.741] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:29.051] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:29.101] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:29.101] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:29.351] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:29.401] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:29.401] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:29.551] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:29.601] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:29.601] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:29.911] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:29.961] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:29.961] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:30.211] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:30.261] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:30.261] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:30.411] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:30.461] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 17:56:30.461] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:30.531] (PreFillP1                        :   6) @Stop
[2018-01-12 17:56:30.771] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:30.821] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:56:30.821] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:30.971] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:31.021] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:56:31.021] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:31.121] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:31.171] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:56:31.171] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:31.321] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:31.371] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:56:31.371] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:31.581] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:31.631] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:56:31.631] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:31.781] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:31.831] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:56:31.831] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:31.931] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:31.981] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 17:56:31.981] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 17:56:31.981] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 17:56:32.021] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 17:56:32.031] (PreFillP2                        :   7) @Stop
[2018-01-12 17:56:32.091] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 17:56:32.091] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 17:56:32.091] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 17:56:32.251] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:32.301] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 17:56:32.321] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 17:56:32.571] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 17:56:32.571] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:32.571] (Flush Capillary                  :   9) @Run
[2018-01-12 17:56:32.571] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 17:56:32.621] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 17:56:32.621] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 17:56:32.621] (Flush Singulator                 :  10) @Run
[2018-01-12 17:56:32.621] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 17:56:32.721] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:32.991] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:33.041] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:33.041] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:33.351] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:33.401] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:33.401] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:33.651] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:33.701] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:33.701] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:33.851] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:33.901] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:33.901] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:34.071] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:34.121] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:34.121] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:34.411] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:34.461] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:34.461] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:34.711] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:34.761] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:56:34.761] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:34.811] (Flush Capillary                  :   9) @Stop
[2018-01-12 17:56:34.911] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:34.961] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:56:34.961] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 17:56:34.961] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 17:56:34.991] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 17:56:35.011] (Flush Singulator                 :  10) @Stop
[2018-01-12 17:56:35.051] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 17:56:35.051] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 17:56:35.051] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 17:56:35.211] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:35.261] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 17:56:35.281] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 17:56:35.531] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 17:56:35.531] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:35.531] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 17:56:35.531] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 17:56:35.581] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 17:56:35.581] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 17:56:35.581] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 17:56:35.581] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 17:56:35.681] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:35.951] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:36.001] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:36.001] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:36.311] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:36.361] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:36.361] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:36.611] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:36.661] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:36.661] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:36.811] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:36.861] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:36.861] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:37.031] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:37.081] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:37.081] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:37.131] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 17:56:37.371] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:37.421] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:56:37.421] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:37.471] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 17:56:37.571] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:37.621] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:56:37.621] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 17:56:37.621] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 17:56:37.651] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 17:56:37.651] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 17:56:37.651] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 17:56:37.651] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 17:56:37.651] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 17:56:37.651] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 17:56:37.651] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:37.651] (PreFillP1                        :   6) @Run
[2018-01-12 17:56:37.651] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 17:56:37.701] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 17:56:37.701] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 17:56:37.701] (PreFillP2                        :   7) @Run
[2018-01-12 17:56:37.701] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 17:56:37.801] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:38.091] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:38.141] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:38.141] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:38.431] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:38.481] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:38.481] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:38.631] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:38.681] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:38.681] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:38.831] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:38.881] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:38.881] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:39.051] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:39.101] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:39.101] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:39.391] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:39.441] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:39.441] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:39.691] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:39.741] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:39.741] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:39.891] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:39.941] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 17:56:39.941] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:40.011] (PreFillP1                        :   6) @Stop
[2018-01-12 17:56:40.251] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:40.301] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:56:40.301] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:40.451] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:40.501] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:56:40.501] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:40.601] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:40.651] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:56:40.651] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:40.801] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:40.851] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:56:40.851] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:41.061] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:41.111] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:56:41.111] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:41.261] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:56:41.311] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 17:56:41.311] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 17:56:41.311] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 17:56:41.351] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 17:56:41.391] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 17:56:41.391] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 17:56:41.391] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 17:56:41.491] (PreFillP2                        :   7) @Stop
[2018-01-12 17:56:41.511] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:41.561] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 17:56:41.691] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 17:56:41.941] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 17:56:41.941] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:41.941] (Flush Capillary                  :   9) @Run
[2018-01-12 17:56:41.941] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 17:56:41.991] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 17:56:41.991] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 17:56:41.991] (Flush Singulator                 :  10) @Run
[2018-01-12 17:56:41.991] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 17:56:42.091] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:42.361] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:42.411] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:42.411] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:42.721] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:42.771] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:42.771] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:43.021] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:43.071] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:43.071] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:43.221] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:43.271] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:43.271] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:43.441] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:43.491] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:43.491] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:43.781] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:43.831] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:43.831] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:44.081] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:44.131] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:56:44.131] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:44.181] (Flush Capillary                  :   9) @Stop
[2018-01-12 17:56:44.281] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:56:44.331] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:56:44.331] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 17:56:44.331] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 17:56:44.341] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 17:56:44.381] (Flush Singulator                 :  10) @Stop
[2018-01-12 17:56:44.421] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 17:56:44.421] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 17:56:44.421] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 17:56:44.581] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:44.631] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 17:56:44.651] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 17:56:44.901] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 17:56:44.901] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:44.901] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 17:56:44.901] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 17:56:44.951] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 17:56:44.951] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 17:56:44.951] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 17:56:44.951] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 17:56:45.051] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:45.321] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:45.371] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:45.371] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:45.681] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:45.731] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:45.731] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:45.981] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:46.031] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:46.031] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:46.181] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:46.231] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:46.231] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:46.401] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:46.451] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:56:46.451] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:46.501] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 17:56:46.741] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:46.791] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:56:46.791] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:46.841] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 17:56:46.941] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:56:46.991] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:56:46.991] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 17:56:46.991] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 17:56:47.021] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 17:56:47.021] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 17:56:47.021] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 17:56:47.021] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 17:56:47.021] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 17:56:47.021] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 17:56:47.021] (Prefill before Flush             :  14) @Run
[2018-01-12 17:56:47.021] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 17:56:47.021] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 17:56:47.021] (PreFillP1                        :  15) @Run
[2018-01-12 17:56:47.021] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 17:56:47.071] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 17:56:47.071] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 17:56:47.071] (PreFillP2                        :  16) @Run
[2018-01-12 17:56:47.071] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 17:56:47.171] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:47.461] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 17:56:47.511] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:56:47.511] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:47.701] (PreFillP1                        :  15) @Stop
[2018-01-12 17:56:47.801] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 17:56:47.851] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 17:56:47.851] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:47.901] (PreFillP2                        :  16) @Stop
[2018-01-12 17:56:48.001] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 17:56:48.051] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 17:56:48.051] (Prefill before Flush             :  14) Stop routine
[2018-01-12 17:56:48.051] (Prefill before Flush             :  14) @Stop
[2018-01-12 17:56:48.071] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 17:56:48.091] (MainPre Routine                  :   0) Stop routine
[2018-01-12 17:56:48.091] (MainPre Routine                  :   0) @Stop
[2018-01-12 17:55:15.689] (Detector                         :   2) @Stop
[2018-01-12 17:56:48.431] ** STARTING C01 MAIN ROUTINE **
[2018-01-12 17:56:48.431] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 17:56:48.431] (Main Well                        :   0) @Run
[2018-01-12 17:56:48.431] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 17:56:48.431] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 17:56:48.431] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 17:56:48.431] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 17:56:48.431] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 17:56:48.431] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 17:56:48.431] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 17:56:48.431] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 17:56:48.431] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 17:56:48.431] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 17:56:48.931] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 17:56:48.931] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 17:56:48.981] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 17:56:49.091] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 17:56:49.091] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 17:56:49.091] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 17:56:49.091] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 17:56:49.091] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 17:56:49.091] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 17:56:49.091] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 17:56:49.091] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 17:56:49.091] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 17:56:49.091] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 17:56:49.111] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:56:49.161] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 17:56:49.181] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 17:56:49.431] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 17:56:49.431] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:56:49.431] (PreWet Tip from P2               :  19) @Run
[2018-01-12 17:56:49.431] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 17:56:49.481] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 17:56:49.481] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 17:56:49.481] (PreWet Tip from P1               :  20) @Run
[2018-01-12 17:56:49.481] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 17:56:49.581] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:49.861] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:56:49.911] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 17:56:49.911] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:50.221] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:56:50.271] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 17:56:50.271] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:50.521] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:56:50.571] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 17:56:50.571] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:50.721] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:56:50.771] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 17:56:50.771] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:50.821] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 17:56:50.941] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:56:50.991] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 17:56:50.991] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:51.041] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 17:56:51.281] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:56:51.331] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 17:56:51.331] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 17:56:51.331] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 17:56:51.331] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 17:56:51.331] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 17:56:51.391] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:56:51.441] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 17:56:51.501] (Main Well                        :   0) Move to Well 25 with z-offset of 2540 um (Wait)
[2018-01-12 17:56:54.161] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:56:54.401] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:56:54.451] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 17:56:54.451] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 17:56:54.551] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:56:54.601] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 17:56:54.601] (Main Well                        :   0) Stop Pump
[2018-01-12 17:56:54.641] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 17:56:54.701] (Main Well                        :   0) Move to Well 25 with z-offset of 310 um (Wait)
[2018-01-12 17:57:04.321] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:04.561] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:57:04.611] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 17:57:04.611] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 17:57:04.611] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 17:57:04.611] (Pickup Sample                    :  21) @Run
[2018-01-12 17:57:04.611] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 17:57:09.281] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 17:57:11.721] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 17:57:11.801] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 17:57:12.001] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:12.101] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:12.151] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:12.151] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:12.251] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:12.301] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:12.301] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:12.401] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:12.451] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:12.451] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:12.561] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:12.611] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:12.611] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:12.811] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:12.861] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:12.861] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:12.961] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:13.011] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:13.011] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:13.111] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:13.161] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:13.161] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:13.261] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:13.311] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:13.311] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:13.521] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:13.571] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:13.571] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:13.671] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:13.721] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:13.721] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:13.821] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:13.871] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:13.871] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:13.971] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:14.021] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:14.021] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:14.231] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:14.281] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:14.281] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:14.381] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:14.431] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:14.431] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:14.531] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:14.581] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:14.581] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:14.681] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:14.731] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:14.731] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:14.941] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:14.991] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:14.991] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:15.091] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:15.141] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:15.141] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:15.241] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:15.291] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:15.291] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:15.391] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:15.441] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:15.441] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:15.651] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:15.701] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:15.701] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:15.801] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:15.851] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:15.851] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:15.951] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:16.001] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:16.001] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:16.101] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:16.151] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:16.151] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:16.361] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:16.411] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:16.411] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:16.511] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:16.561] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:16.561] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:16.661] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:16.711] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:16.711] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:16.811] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:16.861] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:16.861] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:17.071] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:17.121] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:17.121] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:17.221] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:17.271] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:17.271] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:17.371] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:17.421] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:17.421] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:17.521] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:17.571] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:17.571] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:17.781] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:17.831] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:17.831] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:17.931] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:17.981] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:17.981] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:18.081] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:18.131] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:18.131] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:18.231] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:18.281] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:18.281] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:18.491] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:18.541] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:18.541] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:18.641] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:18.691] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:18.691] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:18.791] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:18.841] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:18.841] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:18.941] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:18.991] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:18.991] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:19.201] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:19.251] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:19.251] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:19.351] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:19.401] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:19.401] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:19.501] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:19.551] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:19.551] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:19.651] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:19.701] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:19.701] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:19.921] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:19.971] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:19.971] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:20.071] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:20.121] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:20.121] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:20.221] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:20.271] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:20.271] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:20.371] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:20.421] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:20.421] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:20.631] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:20.681] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:20.681] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:20.781] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:20.831] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:20.831] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:20.931] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:20.981] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:20.981] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:21.081] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:21.131] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:57:21.131] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:57:21.341] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:21.391] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 17:57:21.391] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 17:57:21.491] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:57:21.541] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 17:57:21.541] (Pickup Sample                    :  21) Stop routine
[2018-01-12 17:57:21.541] (Pickup Sample                    :  21) @Stop
[2018-01-12 17:57:21.811] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 17:57:21.921] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 17:57:22.171] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 17:57:22.191] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:57:22.241] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 17:57:22.241] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 17:57:22.241] (Singulate Sample                 :  22) @Run
[2018-01-12 17:57:22.241] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 17:57:22.241] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 17:57:22.241] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 17:57:22.301] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 17:57:22.351] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 17:57:22.411] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 17:57:22.511] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_C01_RAW.qlb"
[2018-01-12 17:57:22.621] (Detector                         :   2) @Run
[2018-01-12 17:57:22.621] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 17:58:02.523] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 17:58:03.293] (Detector                         :   2) @Stop
[2018-01-12 17:58:03.323] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 17:58:03.323] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:03.423] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 17:58:03.473] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 17:58:03.473] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:03.683] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 17:58:03.733] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 17:58:03.733] (Singulate Sample                 :  22) Stop routine
[2018-01-12 17:58:03.733] (Singulate Sample                 :  22) @Stop
[2018-01-12 17:58:04.043] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 17:58:04.043] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 17:58:04.043] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 17:58:04.043] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 17:58:04.043] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 17:58:04.043] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 17:58:04.043] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:04.043] (PreFillP1                        :  24) @Run
[2018-01-12 17:58:04.043] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 17:58:04.093] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 17:58:04.093] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 17:58:04.093] (PreFillP2                        :  25) @Run
[2018-01-12 17:58:04.093] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 17:58:04.193] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:04.623] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:04.673] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:04.673] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:04.823] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:04.873] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:04.873] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:05.023] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:05.073] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:05.073] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:05.243] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:05.293] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:05.293] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:05.583] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:05.633] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:05.633] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:05.883] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:05.933] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:05.933] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:06.083] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:06.133] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:06.133] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:06.303] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:06.353] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:06.353] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:06.643] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:06.693] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:06.693] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:06.943] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:06.993] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:06.993] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:07.143] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:07.193] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 17:58:07.193] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:07.243] (PreFillP1                        :  24) @Stop
[2018-01-12 17:58:07.363] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:07.413] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:58:07.413] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:07.703] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:07.753] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:58:07.753] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:07.803] (PreFillP2                        :  25) @Stop
[2018-01-12 17:58:07.903] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 17:58:07.953] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 17:58:07.953] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 17:58:07.953] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 17:58:07.993] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 17:58:07.993] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 17:58:07.993] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 17:58:08.013] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:58:08.063] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 17:58:08.083] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 17:58:08.333] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 17:58:08.333] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:58:08.333] (Flush Capillary                  :  27) @Run
[2018-01-12 17:58:08.333] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 17:58:08.383] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 17:58:08.383] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 17:58:08.383] (Flush Singulator                 :  28) @Run
[2018-01-12 17:58:08.383] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 17:58:08.483] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:08.753] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:58:08.803] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:08.803] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:08.973] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:58:09.023] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:09.023] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:09.313] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:58:09.363] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:09.363] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:09.613] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:58:09.663] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:09.663] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:09.713] (Flush Capillary                  :  27) @Stop
[2018-01-12 17:58:09.813] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:58:09.863] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:58:09.863] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:09.913] (Flush Singulator                 :  28) @Stop
[2018-01-12 17:58:10.033] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 17:58:10.083] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:58:10.083] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 17:58:10.083] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 17:58:10.093] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 17:58:10.193] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 17:58:10.193] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 17:58:10.193] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 17:58:10.213] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 17:58:10.263] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 17:58:10.283] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 17:58:10.533] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 17:58:10.533] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 17:58:10.533] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 17:58:10.533] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 17:58:10.583] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 17:58:10.583] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 17:58:10.583] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 17:58:10.583] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 17:58:10.683] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:10.973] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 17:58:11.023] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:11.023] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:11.313] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 17:58:11.363] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:58:11.363] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:11.413] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 17:58:11.513] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 17:58:11.563] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:58:11.563] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 17:58:11.563] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 17:58:11.593] (Main Well                        :   0) Stop Pump
[2018-01-12 17:58:11.613] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 17:58:11.653] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 17:58:11.653] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 17:58:11.653] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 17:58:11.693] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 17:58:11.743] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 17:58:11.853] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 17:58:12.103] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 17:58:12.103] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 17:58:12.103] (Flush Capillary                  :  33) @Run
[2018-01-12 17:58:12.103] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 17:58:12.153] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 17:58:12.153] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 17:58:12.153] (Flush Singulator                 :  34) @Run
[2018-01-12 17:58:12.153] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 17:58:12.253] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:12.523] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 17:58:12.573] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:12.573] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:12.883] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 17:58:12.933] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:58:12.933] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:12.983] (Flush Singulator                 :  34) @Stop
[2018-01-12 17:58:13.083] (Flush Capillary                  :  33) @Stop
[2018-01-12 17:58:13.183] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 17:58:13.233] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:58:13.233] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 17:58:13.233] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 17:58:13.253] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 17:58:13.273] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 17:58:13.273] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 17:58:13.273] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 17:58:13.293] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 17:58:13.343] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 17:58:13.473] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 17:58:13.723] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 17:58:13.723] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 17:58:13.723] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 17:58:13.723] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 17:58:13.773] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 17:58:13.773] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 17:58:13.773] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 17:58:13.773] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 17:58:13.873] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:14.143] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 17:58:14.193] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:14.193] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:14.503] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 17:58:14.553] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:58:14.553] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:14.603] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 17:58:14.703] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 17:58:14.803] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 17:58:14.853] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:58:14.853] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 17:58:14.853] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 17:58:14.873] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 17:58:14.893] (Main Well                        :   0) Stop routine
[2018-01-12 17:58:14.893] (Main Well                        :   0) @Stop
[2018-01-12 17:58:14.973] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 17:58:14.973] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 17:58:14.973] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 17:58:14.973] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 17:58:15.073] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 17:58:15.073] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 17:58:16.973] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 17:58:16.973] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 17:58:16.973] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 17:58:16.973] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 17:58:17.093] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 17:58:17.093] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 17:58:03.293] (Detector                         :  17) @Stop
[2018-01-12 17:58:21.883] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 17:58:21.883] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 17:58:21.883] (MainPre Routine                  :   0) @Run
[2018-01-12 17:58:21.883] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 17:58:28.053] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 17:58:28.053] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 17:58:28.053] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 17:58:28.693] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 17:58:28.693] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 17:58:28.703] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 17:58:30.433] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 17:58:30.433] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 17:58:30.433] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 17:58:30.593] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 17:58:30.643] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 17:58:30.663] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 17:58:30.913] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 17:58:30.913] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 17:58:30.913] (Initialize P1                    :   3) @Run
[2018-01-12 17:58:30.913] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 17:58:30.963] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 17:58:30.963] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 17:58:30.963] (Initialize P2                    :   4) @Run
[2018-01-12 17:58:30.963] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 17:58:31.143] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:31.373] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:31.493] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:58:31.543] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:31.543] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:31.593] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:58:31.643] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:31.643] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:31.843] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:58:31.893] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:31.893] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:31.943] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:58:31.993] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:31.993] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:32.043] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:58:32.093] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:32.093] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:32.143] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:58:32.193] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:32.193] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:32.243] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:58:32.293] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:32.293] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:32.343] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:58:32.393] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:32.393] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:32.463] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:58:32.513] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:32.513] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:32.703] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:58:32.753] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:32.753] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:32.803] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:58:32.853] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:32.853] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:32.903] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:58:32.953] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:32.953] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:33.003] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:58:33.053] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:33.053] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:33.103] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:58:33.153] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:33.153] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:33.203] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:58:33.253] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:33.253] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:33.323] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:58:33.373] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:33.373] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:33.563] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 17:58:33.613] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 17:58:33.613] (Initialize P1                    :   3) Stop routine
[2018-01-12 17:58:33.613] (Initialize P1                    :   3) @Stop
[2018-01-12 17:58:33.663] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:58:33.713] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 17:58:33.713] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:33.813] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 17:58:33.863] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 17:58:33.863] (Initialize P2                    :   4) Stop routine
[2018-01-12 17:58:33.863] (Initialize P2                    :   4) @Stop
[2018-01-12 17:58:33.963] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 17:58:34.163] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 17:58:34.183] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 17:58:34.183] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 17:58:34.183] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 17:58:34.183] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 17:58:34.183] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:34.183] (PreFillP1                        :   6) @Run
[2018-01-12 17:58:34.183] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 17:58:34.233] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 17:58:34.233] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 17:58:34.233] (PreFillP2                        :   7) @Run
[2018-01-12 17:58:34.233] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 17:58:34.333] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:34.603] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:34.653] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:34.653] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:34.823] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:34.873] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:34.873] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:35.163] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:35.213] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:35.213] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:35.463] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:35.513] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:35.513] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:35.663] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:35.713] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:35.713] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:35.883] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:35.933] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:35.933] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:36.223] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:36.273] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:36.273] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:36.423] (PreFillP1                        :   6) @Stop
[2018-01-12 17:58:36.523] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:36.573] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 17:58:36.573] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:36.723] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:36.773] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:58:36.773] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:36.983] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:37.033] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:58:37.033] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:37.183] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:37.233] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:58:37.233] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:37.333] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:37.383] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:58:37.383] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:37.533] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:37.583] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:58:37.583] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:37.793] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:37.843] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 17:58:37.843] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 17:58:37.843] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 17:58:37.883] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 17:58:37.893] (PreFillP2                        :   7) @Stop
[2018-01-12 17:58:37.933] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 17:58:37.933] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 17:58:37.933] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 17:58:37.953] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:38.003] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 17:58:38.023] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 17:58:38.273] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 17:58:38.273] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:38.273] (Flush Capillary                  :   9) @Run
[2018-01-12 17:58:38.273] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 17:58:38.323] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 17:58:38.323] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 17:58:38.323] (Flush Singulator                 :  10) @Run
[2018-01-12 17:58:38.323] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 17:58:38.423] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:38.673] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:38.723] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:38.723] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:38.873] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:38.923] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:38.923] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:39.093] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:39.143] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:39.143] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:39.433] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:39.483] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:39.483] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:39.733] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:39.783] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:39.783] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:39.933] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:39.983] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:39.983] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:40.153] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:40.203] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:40.203] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:40.493] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:40.543] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:58:40.543] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:40.593] (Flush Singulator                 :  10) @Stop
[2018-01-12 17:58:40.693] (Flush Capillary                  :   9) @Stop
[2018-01-12 17:58:40.793] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:40.843] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:58:40.843] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 17:58:40.843] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 17:58:40.883] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 17:58:40.903] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 17:58:40.903] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 17:58:40.903] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 17:58:40.943] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:40.993] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 17:58:41.103] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 17:58:41.353] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 17:58:41.353] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:41.353] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 17:58:41.353] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 17:58:41.403] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 17:58:41.403] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 17:58:41.403] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 17:58:41.403] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 17:58:41.503] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:41.773] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:41.823] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:41.823] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:42.133] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:42.183] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:42.183] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:42.433] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:42.483] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:42.483] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:42.633] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:42.683] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:42.683] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:42.853] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:42.903] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:42.903] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:42.953] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 17:58:43.193] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:43.243] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:58:43.243] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:43.293] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 17:58:43.393] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:43.443] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:58:43.443] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 17:58:43.443] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 17:58:43.453] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 17:58:43.453] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 17:58:43.453] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 17:58:43.453] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 17:58:43.453] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 17:58:43.453] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 17:58:43.453] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:43.453] (PreFillP1                        :   6) @Run
[2018-01-12 17:58:43.453] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 17:58:43.503] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 17:58:43.503] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 17:58:43.503] (PreFillP2                        :   7) @Run
[2018-01-12 17:58:43.503] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 17:58:43.603] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:43.893] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:43.943] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:43.943] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:44.233] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:44.283] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:44.283] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:44.433] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:44.483] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:44.483] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:44.633] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:44.683] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:44.683] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:44.853] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:44.903] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:44.903] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:45.193] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:45.243] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:45.243] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:45.493] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:45.543] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:45.543] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:45.693] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:45.743] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 17:58:45.743] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:45.793] (PreFillP1                        :   6) @Stop
[2018-01-12 17:58:45.913] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:45.963] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:58:45.963] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:46.253] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:46.303] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:58:46.303] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:46.453] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:46.503] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:58:46.503] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:46.603] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:46.653] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:58:46.653] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:46.803] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:46.853] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 17:58:46.853] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:47.063] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 17:58:47.113] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 17:58:47.113] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 17:58:47.113] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 17:58:47.153] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 17:58:47.163] (PreFillP2                        :   7) @Stop
[2018-01-12 17:58:47.203] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 17:58:47.203] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 17:58:47.203] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 17:58:47.223] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:47.273] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 17:58:47.293] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 17:58:47.543] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 17:58:47.543] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:47.543] (Flush Capillary                  :   9) @Run
[2018-01-12 17:58:47.543] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 17:58:47.593] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 17:58:47.593] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 17:58:47.593] (Flush Singulator                 :  10) @Run
[2018-01-12 17:58:47.593] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 17:58:47.693] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:47.943] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:47.993] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:47.993] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:48.143] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:48.193] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:48.193] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:48.363] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:48.413] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:48.413] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:48.703] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:48.753] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:48.753] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:49.003] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:49.053] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:49.053] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:49.203] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:49.253] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:49.253] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:49.423] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:49.473] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:49.473] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:49.773] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:49.823] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:58:49.823] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:49.873] (Flush Singulator                 :  10) @Stop
[2018-01-12 17:58:49.973] (Flush Capillary                  :   9) @Stop
[2018-01-12 17:58:50.073] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 17:58:50.123] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:58:50.123] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 17:58:50.123] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 17:58:50.153] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 17:58:50.173] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 17:58:50.173] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 17:58:50.173] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 17:58:50.213] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:50.263] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 17:58:50.373] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 17:58:50.623] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 17:58:50.623] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:50.623] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 17:58:50.623] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 17:58:50.673] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 17:58:50.673] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 17:58:50.673] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 17:58:50.673] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 17:58:50.773] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:51.043] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:51.093] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:51.093] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:51.403] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:51.453] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:51.453] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:51.703] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:51.753] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:51.753] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:51.903] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:51.953] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:51.953] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:52.123] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:52.173] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 17:58:52.173] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:52.223] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 17:58:52.463] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:52.513] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 17:58:52.513] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:52.563] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 17:58:52.663] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 17:58:52.713] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 17:58:52.713] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 17:58:52.713] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 17:58:52.723] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 17:58:52.723] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 17:58:52.723] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 17:58:52.723] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 17:58:52.723] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 17:58:52.723] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 17:58:52.723] (Prefill before Flush             :  14) @Run
[2018-01-12 17:58:52.723] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 17:58:52.723] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 17:58:52.723] (PreFillP1                        :  15) @Run
[2018-01-12 17:58:52.723] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 17:58:52.773] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 17:58:52.773] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 17:58:52.773] (PreFillP2                        :  16) @Run
[2018-01-12 17:58:52.773] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 17:58:52.873] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:53.173] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 17:58:53.223] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:58:53.223] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:53.413] (PreFillP1                        :  15) @Stop
[2018-01-12 17:58:53.513] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 17:58:53.563] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 17:58:53.563] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:53.613] (PreFillP2                        :  16) @Stop
[2018-01-12 17:58:53.713] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 17:58:53.763] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 17:58:53.763] (Prefill before Flush             :  14) Stop routine
[2018-01-12 17:58:53.763] (Prefill before Flush             :  14) @Stop
[2018-01-12 17:58:53.773] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 17:58:53.793] (MainPre Routine                  :   0) Stop routine
[2018-01-12 17:58:53.793] (MainPre Routine                  :   0) @Stop
[2018-01-12 17:58:03.293] (Detector                         :   2) @Stop
[2018-01-12 17:58:53.963] ** STARTING D01 MAIN ROUTINE **
[2018-01-12 17:58:53.963] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 17:58:53.963] (Main Well                        :   0) @Run
[2018-01-12 17:58:53.963] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 17:58:53.963] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 17:58:53.963] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 17:58:53.963] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 17:58:53.963] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 17:58:53.963] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 17:58:53.963] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 17:58:53.963] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 17:58:53.963] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 17:58:53.963] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 17:58:54.483] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 17:58:54.483] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 17:58:54.513] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 17:58:54.643] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 17:58:54.643] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 17:58:54.643] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 17:58:54.643] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 17:58:54.643] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 17:58:54.643] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 17:58:54.643] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 17:58:54.643] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 17:58:54.643] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 17:58:54.643] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 17:58:54.663] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:58:54.713] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 17:58:54.733] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 17:58:54.983] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 17:58:54.983] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:58:54.983] (PreWet Tip from P2               :  19) @Run
[2018-01-12 17:58:54.983] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 17:58:55.033] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 17:58:55.033] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 17:58:55.033] (PreWet Tip from P1               :  20) @Run
[2018-01-12 17:58:55.033] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 17:58:55.133] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:55.403] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:58:55.453] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 17:58:55.453] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:55.763] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:58:55.813] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 17:58:55.813] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:56.063] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:58:56.113] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 17:58:56.113] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:56.263] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:58:56.313] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 17:58:56.313] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:56.363] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 17:58:56.483] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:58:56.533] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 17:58:56.533] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 17:58:56.583] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 17:58:56.823] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:58:56.873] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 17:58:56.873] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 17:58:56.873] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 17:58:56.873] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 17:58:56.873] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 17:58:56.933] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:58:56.983] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 17:58:57.043] (Main Well                        :   0) Move to Well 37 with z-offset of 2540 um (Wait)
[2018-01-12 17:58:59.713] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 17:58:59.953] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:59:00.003] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 17:59:00.003] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:00.103] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:59:00.153] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 17:59:00.153] (Main Well                        :   0) Stop Pump
[2018-01-12 17:59:00.193] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 17:59:00.253] (Main Well                        :   0) Move to Well 37 with z-offset of 310 um (Wait)
[2018-01-12 17:59:08.913] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:09.153] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:59:09.203] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 17:59:09.203] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 17:59:09.203] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 17:59:09.203] (Pickup Sample                    :  21) @Run
[2018-01-12 17:59:09.203] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 17:59:13.873] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 17:59:16.313] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 17:59:16.393] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 17:59:16.593] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:16.693] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:16.743] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:16.743] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:16.843] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:16.893] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:16.893] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:16.993] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:17.043] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:17.043] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:17.153] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:17.203] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:17.203] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:17.393] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:17.443] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:17.443] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:17.543] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:17.593] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:17.593] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:17.693] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:17.743] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:17.743] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:17.843] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:17.893] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:17.893] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:18.103] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:18.153] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:18.153] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:18.253] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:18.303] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:18.303] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:18.403] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:18.453] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:18.453] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:18.553] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:18.603] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:18.603] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:18.813] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:18.863] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:18.863] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:18.963] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:19.013] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:19.013] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:19.113] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:19.163] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:19.163] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:19.263] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:19.313] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:19.313] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:19.523] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:19.573] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:19.573] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:19.673] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:19.723] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:19.723] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:19.823] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:19.873] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:19.873] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:19.973] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:20.023] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:20.023] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:20.233] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:20.283] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:20.283] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:20.383] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:20.433] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:20.433] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:20.533] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:20.583] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:20.583] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:20.683] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:20.733] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:20.733] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:20.943] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:20.993] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:20.993] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:21.093] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:21.143] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:21.143] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:21.243] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:21.293] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:21.293] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:21.393] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:21.443] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:21.443] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:21.653] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:21.703] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:21.703] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:21.803] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:21.853] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:21.853] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:21.953] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:22.003] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:22.003] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:22.103] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:22.153] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:22.153] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:22.363] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:22.413] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:22.413] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:22.513] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:22.563] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:22.563] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:22.663] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:22.713] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:22.713] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:22.813] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:22.863] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:22.863] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:23.073] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:23.123] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:23.123] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:23.223] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:23.273] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:23.273] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:23.373] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:23.423] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:23.423] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:23.523] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:23.573] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:23.573] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:23.783] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:23.833] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:23.833] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:23.933] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:23.983] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:23.983] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:24.083] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:24.133] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:24.133] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:24.233] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:24.283] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:24.283] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:24.493] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:24.543] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:24.543] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:24.643] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:24.693] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:24.693] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:24.793] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:24.843] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:24.843] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:24.943] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:24.993] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:24.993] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:25.203] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:25.253] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:25.253] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:25.353] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:25.403] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:25.403] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:25.503] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:25.553] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:25.553] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:25.653] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:25.703] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 17:59:25.703] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 17:59:25.913] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:25.963] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 17:59:25.963] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 17:59:26.063] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 17:59:26.113] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 17:59:26.113] (Pickup Sample                    :  21) Stop routine
[2018-01-12 17:59:26.113] (Pickup Sample                    :  21) @Stop
[2018-01-12 17:59:26.403] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 17:59:26.493] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 17:59:26.743] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 17:59:26.773] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 17:59:26.823] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 17:59:26.823] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 17:59:26.823] (Singulate Sample                 :  22) @Run
[2018-01-12 17:59:26.823] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 17:59:26.823] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 17:59:26.823] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 17:59:26.883] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 17:59:26.933] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 17:59:26.993] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 17:59:27.093] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_D01_RAW.qlb"
[2018-01-12 17:59:27.203] (Detector                         :   2) @Run
[2018-01-12 17:59:27.203] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:00:07.103] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:00:07.983] (Detector                         :   2) @Stop
[2018-01-12 18:00:08.103] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:00:08.103] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:08.213] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:00:08.263] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:00:08.263] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:08.363] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:00:08.413] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:00:08.413] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:00:08.413] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:00:08.623] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:00:08.623] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:00:08.623] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:00:08.623] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:00:08.623] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:00:08.623] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:00:08.623] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:08.623] (PreFillP1                        :  24) @Run
[2018-01-12 18:00:08.623] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:00:08.673] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:00:08.673] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:00:08.673] (PreFillP2                        :  25) @Run
[2018-01-12 18:00:08.673] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:00:08.773] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:09.113] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:09.163] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:09.163] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:09.313] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:09.363] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:09.363] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:09.533] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:09.583] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:09.583] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:09.873] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:09.923] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:09.923] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:10.173] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:10.223] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:10.223] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:10.373] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:10.423] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:10.423] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:10.593] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:10.643] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:10.643] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:10.933] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:10.983] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:10.983] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:11.233] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:11.283] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:11.283] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:11.433] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:11.483] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:11.483] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:11.653] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:11.703] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:00:11.703] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:11.993] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:12.043] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:12.043] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:12.093] (PreFillP1                        :  24) @Stop
[2018-01-12 18:00:12.293] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:12.343] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:12.343] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:12.443] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:12.493] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:12.493] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:12.543] (PreFillP2                        :  25) @Stop
[2018-01-12 18:00:12.663] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:00:12.713] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:00:12.713] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:00:12.713] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:00:12.723] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:00:12.723] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:00:12.723] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:00:12.833] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:00:12.883] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:00:12.903] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:00:13.153] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:00:13.153] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:00:13.153] (Flush Capillary                  :  27) @Run
[2018-01-12 18:00:13.153] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:00:13.203] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:00:13.203] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:00:13.203] (Flush Singulator                 :  28) @Run
[2018-01-12 18:00:13.203] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:00:13.303] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:13.573] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:00:13.623] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:13.623] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:13.933] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:00:13.983] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:13.983] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:14.233] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:00:14.283] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:14.283] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:14.433] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:00:14.483] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:14.483] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:14.533] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:00:14.653] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:00:14.703] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:00:14.703] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:14.753] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:00:14.993] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:00:15.043] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:00:15.043] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:00:15.043] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:00:15.073] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:00:15.093] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:00:15.093] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:00:15.093] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:00:15.113] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:00:15.163] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:00:15.183] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:00:15.433] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:00:15.433] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:00:15.433] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:00:15.433] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:00:15.483] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:00:15.483] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:00:15.483] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:00:15.483] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:00:15.583] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:15.773] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:00:15.823] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:15.823] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:16.073] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:00:16.123] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:16.123] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:16.433] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:00:16.483] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:00:16.483] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:16.533] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:00:16.633] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:00:16.733] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:00:16.783] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:00:16.783] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:00:16.783] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:00:16.793] (Main Well                        :   0) Stop Pump
[2018-01-12 18:00:16.833] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:00:16.833] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:00:16.833] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:00:16.873] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:00:16.923] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:00:17.033] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:00:17.283] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:00:17.283] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:00:17.283] (Flush Capillary                  :  33) @Run
[2018-01-12 18:00:17.283] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:00:17.333] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:00:17.333] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:00:17.333] (Flush Singulator                 :  34) @Run
[2018-01-12 18:00:17.333] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:00:17.433] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:17.703] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:00:17.753] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:17.753] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:18.063] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:00:18.113] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:00:18.113] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:18.163] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:00:18.263] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:00:18.363] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:00:18.413] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:00:18.413] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:00:18.413] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:00:18.433] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:00:18.453] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:00:18.453] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:00:18.453] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:00:18.473] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:00:18.523] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:00:18.653] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:00:18.903] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:00:18.903] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:00:18.903] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:00:18.903] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:00:18.953] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:00:18.953] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:00:18.953] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:00:18.953] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:00:19.053] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:19.323] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:00:19.373] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:19.373] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:19.683] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:00:19.733] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:00:19.733] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:19.783] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:00:19.883] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:00:19.983] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:00:20.033] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:00:20.033] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:00:20.033] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:00:20.053] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:00:20.073] (Main Well                        :   0) Stop routine
[2018-01-12 18:00:20.073] (Main Well                        :   0) @Stop
[2018-01-12 18:00:20.523] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:00:20.523] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:00:20.533] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:00:20.533] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:00:20.563] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:00:20.563] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:00:22.523] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:00:22.523] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:00:22.523] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:00:22.523] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:00:22.563] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:00:22.563] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:00:07.983] (Detector                         :  17) @Stop
[2018-01-12 18:00:26.523] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:00:26.523] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:00:26.523] (MainPre Routine                  :   0) @Run
[2018-01-12 18:00:26.523] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:00:32.543] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:00:32.543] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:00:32.543] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:00:33.183] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:00:33.183] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:00:33.193] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:00:34.923] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:00:34.923] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:00:34.923] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:00:35.083] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:00:35.133] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:00:35.153] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:00:35.403] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:00:35.403] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:00:35.403] (Initialize P1                    :   3) @Run
[2018-01-12 18:00:35.403] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:00:35.453] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:00:35.453] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:00:35.453] (Initialize P2                    :   4) @Run
[2018-01-12 18:00:35.453] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:00:35.633] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:35.863] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:35.983] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:00:36.033] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:36.033] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:36.083] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:00:36.133] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:36.133] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:36.323] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:00:36.373] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:36.373] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:36.423] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:00:36.473] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:36.473] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:36.523] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:00:36.573] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:36.573] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:36.623] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:00:36.673] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:36.673] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:36.723] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:00:36.773] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:36.773] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:36.823] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:00:36.873] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:36.873] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:36.943] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:00:36.993] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:36.993] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:37.183] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:00:37.233] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:37.233] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:37.283] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:00:37.333] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:37.333] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:37.383] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:00:37.433] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:37.433] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:37.483] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:00:37.533] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:37.533] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:37.583] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:00:37.633] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:37.633] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:37.683] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:00:37.733] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:37.733] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:37.803] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:00:37.853] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:37.853] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:38.043] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:00:38.093] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:38.093] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:38.143] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:00:38.193] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:00:38.193] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:38.243] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:00:38.293] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:00:38.293] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:00:38.293] (Initialize P1                    :   3) @Stop
[2018-01-12 18:00:38.343] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:00:38.393] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:00:38.393] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:00:38.393] (Initialize P2                    :   4) @Stop
[2018-01-12 18:00:38.653] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:00:38.853] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:00:38.873] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:00:38.873] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:00:38.873] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:00:38.873] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:00:38.873] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:38.873] (PreFillP1                        :   6) @Run
[2018-01-12 18:00:38.873] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:00:38.923] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:00:38.923] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:00:38.923] (PreFillP2                        :   7) @Run
[2018-01-12 18:00:38.923] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:00:39.023] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:39.293] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:39.343] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:39.343] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:39.653] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:39.703] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:39.703] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:39.953] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:40.003] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:40.003] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:40.153] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:40.203] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:40.203] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:40.373] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:40.423] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:40.423] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:40.713] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:40.763] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:40.763] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:41.013] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:41.063] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:00:41.063] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:41.113] (PreFillP1                        :   6) @Stop
[2018-01-12 18:00:41.213] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:41.263] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:41.263] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:41.433] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:41.483] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:41.483] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:41.673] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:41.723] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:41.723] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:41.873] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:41.923] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:41.923] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:42.023] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:42.073] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:42.073] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:42.223] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:42.273] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:42.273] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:42.483] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:42.533] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:00:42.533] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:00:42.533] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:00:42.573] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:00:42.583] (PreFillP2                        :   7) @Stop
[2018-01-12 18:00:42.623] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:00:42.623] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:00:42.623] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:00:42.643] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:42.693] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:00:42.713] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:00:42.963] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:00:42.963] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:42.963] (Flush Capillary                  :   9) @Run
[2018-01-12 18:00:42.963] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:00:43.013] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:00:43.013] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:00:43.013] (Flush Singulator                 :  10) @Run
[2018-01-12 18:00:43.013] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:00:43.113] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:43.363] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:43.413] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:43.413] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:43.563] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:43.613] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:43.613] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:43.793] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:43.843] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:43.843] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:44.133] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:44.183] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:44.183] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:44.433] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:44.483] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:44.483] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:44.633] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:44.683] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:44.683] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:44.853] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:44.903] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:44.903] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:45.193] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:45.243] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:00:45.243] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:45.293] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:00:45.393] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:00:45.493] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:45.543] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:00:45.543] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:00:45.543] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:00:45.573] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:00:45.593] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:00:45.593] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:00:45.593] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:00:45.633] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:45.683] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:00:45.793] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:00:46.043] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:00:46.043] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:46.043] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:00:46.043] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:00:46.093] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:00:46.093] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:00:46.093] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:00:46.093] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:00:46.193] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:46.463] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:46.513] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:46.513] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:46.823] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:46.873] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:46.873] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:47.123] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:47.173] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:47.173] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:47.323] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:47.373] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:47.373] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:47.543] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:47.593] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:47.593] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:47.643] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:00:47.883] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:47.933] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:00:47.933] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:47.983] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:00:48.083] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:48.133] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:00:48.133] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:00:48.133] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:00:48.143] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:00:48.143] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:00:48.143] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:00:48.143] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:00:48.143] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:00:48.143] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:00:48.143] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:48.143] (PreFillP1                        :   6) @Run
[2018-01-12 18:00:48.143] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:00:48.193] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:00:48.193] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:00:48.193] (PreFillP2                        :   7) @Run
[2018-01-12 18:00:48.193] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:00:48.293] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:48.583] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:48.633] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:48.633] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:48.923] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:48.973] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:48.973] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:49.123] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:49.173] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:49.173] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:49.323] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:49.373] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:49.373] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:49.543] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:49.593] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:49.593] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:49.883] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:49.933] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:49.933] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:50.183] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:50.233] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:50.233] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:50.383] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:50.433] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:00:50.433] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:50.483] (PreFillP1                        :   6) @Stop
[2018-01-12 18:00:50.603] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:50.653] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:50.653] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:50.943] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:50.993] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:50.993] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:51.143] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:51.193] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:51.193] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:51.293] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:51.343] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:51.343] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:51.493] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:51.543] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:00:51.543] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:51.753] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:00:51.803] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:00:51.803] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:00:51.803] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:00:51.843] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:00:51.853] (PreFillP2                        :   7) @Stop
[2018-01-12 18:00:51.893] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:00:51.893] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:00:51.893] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:00:51.913] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:51.963] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:00:51.983] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:00:52.233] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:00:52.233] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:52.233] (Flush Capillary                  :   9) @Run
[2018-01-12 18:00:52.233] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:00:52.283] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:00:52.283] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:00:52.283] (Flush Singulator                 :  10) @Run
[2018-01-12 18:00:52.283] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:00:52.383] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:52.633] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:52.683] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:52.683] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:52.833] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:52.883] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:52.883] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:53.053] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:53.103] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:53.103] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:53.393] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:53.443] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:53.443] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:53.693] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:53.743] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:53.743] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:53.893] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:53.943] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:53.943] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:54.113] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:54.163] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:54.163] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:54.453] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:54.503] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:00:54.503] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:54.553] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:00:54.653] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:00:54.753] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:00:54.803] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:00:54.803] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:00:54.803] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:00:54.843] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:00:54.863] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:00:54.863] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:00:54.863] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:00:54.903] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:54.953] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:00:55.063] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:00:55.313] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:00:55.313] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:55.313] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:00:55.313] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:00:55.363] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:00:55.363] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:00:55.363] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:00:55.363] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:00:55.463] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:55.733] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:55.783] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:55.783] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:56.093] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:56.143] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:56.143] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:56.393] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:56.443] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:56.443] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:56.593] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:56.643] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:56.643] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:56.813] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:56.863] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:00:56.863] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:56.913] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:00:57.153] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:57.203] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:00:57.203] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:57.253] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:00:57.353] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:00:57.403] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:00:57.403] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:00:57.403] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:00:57.413] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:00:57.413] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:00:57.413] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:00:57.413] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:00:57.413] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:00:57.413] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:00:57.413] (Prefill before Flush             :  14) @Run
[2018-01-12 18:00:57.413] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:00:57.413] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:00:57.413] (PreFillP1                        :  15) @Run
[2018-01-12 18:00:57.413] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:00:57.463] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:00:57.463] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:00:57.463] (PreFillP2                        :  16) @Run
[2018-01-12 18:00:57.463] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:00:57.563] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:57.853] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:00:57.903] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:00:57.903] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:00:58.093] (PreFillP1                        :  15) @Stop
[2018-01-12 18:00:58.193] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:00:58.243] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:00:58.243] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:00:58.293] (PreFillP2                        :  16) @Stop
[2018-01-12 18:00:58.393] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:00:58.443] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:00:58.443] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:00:58.443] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:00:58.463] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:00:58.483] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:00:58.483] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:00:07.983] (Detector                         :   2) @Stop
[2018-01-12 18:00:58.613] ** STARTING E01 MAIN ROUTINE **
[2018-01-12 18:00:58.613] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:00:58.613] (Main Well                        :   0) @Run
[2018-01-12 18:00:58.613] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:00:58.613] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:00:58.613] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:00:58.613] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:00:58.613] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:00:58.613] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:00:58.613] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:00:58.613] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:00:58.613] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:00:58.613] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:00:59.163] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:00:59.163] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:00:59.213] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:00:59.323] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:00:59.323] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:00:59.323] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:00:59.323] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:00:59.323] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:00:59.323] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:00:59.323] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:00:59.323] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:00:59.323] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:00:59.323] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:00:59.343] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:00:59.393] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:00:59.413] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:00:59.663] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:00:59.663] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:00:59.663] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:00:59.663] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:00:59.713] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:00:59.713] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:00:59.713] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:00:59.713] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:00:59.813] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:01:00.083] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:01:00.133] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:01:00.133] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:01:00.443] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:01:00.493] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:01:00.493] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:01:00.743] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:01:00.793] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:01:00.793] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:01:00.943] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:01:00.993] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:01:00.993] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:01:01.043] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:01:01.163] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:01:01.213] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:01:01.213] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:01.263] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:01:01.503] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:01:01.553] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:01:01.553] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:01:01.553] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:01:01.553] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:01:01.553] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:01:01.613] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:01:01.663] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:01:01.723] (Main Well                        :   0) Move to Well 49 with z-offset of 2540 um (Wait)
[2018-01-12 18:01:04.653] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:01:04.893] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:01:04.943] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:01:04.943] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:05.043] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:01:05.093] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:01:05.093] (Main Well                        :   0) Stop Pump
[2018-01-12 18:01:05.133] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:01:05.193] (Main Well                        :   0) Move to Well 49 with z-offset of 310 um (Wait)
[2018-01-12 18:01:15.093] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:15.333] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:01:15.383] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:01:15.383] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:01:15.383] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:01:15.383] (Pickup Sample                    :  21) @Run
[2018-01-12 18:01:15.383] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:01:20.053] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:01:22.673] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:01:22.753] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:01:22.953] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:23.053] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:23.103] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:23.103] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:23.203] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:23.253] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:23.253] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:23.353] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:23.403] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:23.403] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:23.513] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:23.563] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:23.563] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:23.753] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:23.803] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:23.803] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:23.903] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:23.953] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:23.953] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:24.053] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:24.103] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:24.103] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:24.203] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:24.253] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:24.253] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:24.463] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:24.513] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:24.513] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:24.613] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:24.663] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:24.663] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:24.763] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:24.813] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:24.813] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:24.913] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:24.963] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:24.963] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:25.173] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:25.223] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:25.223] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:25.323] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:25.373] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:25.373] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:25.473] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:25.523] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:25.523] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:25.623] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:25.673] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:25.673] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:25.883] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:25.933] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:25.933] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:26.033] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:26.083] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:26.083] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:26.183] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:26.233] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:26.233] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:26.333] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:26.383] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:26.383] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:26.593] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:26.643] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:26.643] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:26.743] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:26.793] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:26.793] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:26.893] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:26.943] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:26.943] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:27.043] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:27.093] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:27.093] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:27.303] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:27.353] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:27.353] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:27.453] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:27.503] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:27.503] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:27.603] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:27.653] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:27.653] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:27.753] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:27.803] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:27.803] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:28.013] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:28.063] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:28.063] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:28.163] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:28.213] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:28.213] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:28.313] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:28.363] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:28.363] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:28.463] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:28.513] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:28.513] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:28.723] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:28.773] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:28.773] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:28.873] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:28.923] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:28.923] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:29.023] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:29.073] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:29.073] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:29.173] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:29.223] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:29.223] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:29.433] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:29.483] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:29.483] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:29.583] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:29.633] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:29.633] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:29.733] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:29.783] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:29.783] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:29.883] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:29.933] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:29.933] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:30.143] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:30.193] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:30.193] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:30.293] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:30.343] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:30.343] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:30.443] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:30.493] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:30.493] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:30.593] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:30.643] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:30.643] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:30.853] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:30.903] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:30.903] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:31.003] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:31.053] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:31.053] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:31.153] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:31.203] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:31.203] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:31.303] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:31.353] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:31.353] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:31.563] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:31.613] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:31.613] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:31.713] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:31.763] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:31.763] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:31.863] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:31.913] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:31.913] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:32.013] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:32.063] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:01:32.063] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:01:32.273] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:32.323] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:01:32.323] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:01:32.423] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:01:32.473] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:01:32.473] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:01:32.473] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:01:32.783] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:01:32.853] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:01:33.103] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:01:33.123] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:01:33.173] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:01:33.173] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:01:33.173] (Singulate Sample                 :  22) @Run
[2018-01-12 18:01:33.173] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:01:33.173] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:01:33.173] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:01:33.233] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:01:33.283] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:01:33.343] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:01:33.443] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_E01_RAW.qlb"
[2018-01-12 18:01:33.543] (Detector                         :   2) @Run
[2018-01-12 18:01:33.543] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:02:13.444] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:02:14.234] (Detector                         :   2) @Stop
[2018-01-12 18:02:14.244] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:02:14.244] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:14.344] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:02:14.394] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:02:14.394] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:14.604] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:02:14.654] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:02:14.654] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:02:14.654] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:02:14.974] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:02:14.974] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:02:14.974] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:02:14.974] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:02:14.974] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:02:14.974] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:02:14.974] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:14.974] (PreFillP1                        :  24) @Run
[2018-01-12 18:02:14.974] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:02:15.024] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:02:15.024] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:02:15.024] (PreFillP2                        :  25) @Run
[2018-01-12 18:02:15.024] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:02:15.124] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:15.554] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:15.604] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:15.604] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:15.754] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:15.804] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:15.804] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:15.954] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:16.004] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:16.004] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:16.174] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:16.224] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:16.224] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:16.514] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:16.564] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:16.564] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:16.814] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:16.864] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:16.864] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:17.014] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:17.064] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:17.064] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:17.234] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:17.284] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:17.284] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:17.574] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:17.624] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:17.624] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:17.874] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:17.924] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:17.924] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:18.074] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:18.124] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:02:18.124] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:18.174] (PreFillP1                        :  24) @Stop
[2018-01-12 18:02:18.294] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:18.344] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:02:18.344] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:18.634] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:18.684] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:02:18.684] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:18.734] (PreFillP2                        :  25) @Stop
[2018-01-12 18:02:18.834] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:02:18.884] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:02:18.884] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:02:18.884] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:02:18.934] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:02:18.934] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:02:18.934] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:02:18.954] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:02:19.004] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:02:19.024] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:02:19.274] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:02:19.274] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:02:19.274] (Flush Capillary                  :  27) @Run
[2018-01-12 18:02:19.274] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:02:19.324] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:02:19.324] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:02:19.324] (Flush Singulator                 :  28) @Run
[2018-01-12 18:02:19.324] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:02:19.424] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:19.694] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:02:19.744] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:19.744] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:19.914] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:02:19.964] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:19.964] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:20.254] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:02:20.304] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:20.304] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:20.554] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:02:20.604] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:20.604] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:20.654] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:02:20.754] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:02:20.804] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:02:20.804] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:20.854] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:02:20.974] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:02:21.024] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:02:21.024] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:02:21.024] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:02:21.034] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:02:21.134] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:02:21.134] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:02:21.134] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:02:21.154] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:02:21.204] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:02:21.224] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:02:21.474] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:02:21.474] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:02:21.474] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:02:21.474] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:02:21.524] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:02:21.524] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:02:21.524] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:02:21.524] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:02:21.624] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:21.914] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:02:21.964] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:21.964] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:22.254] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:02:22.304] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:02:22.304] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:22.354] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:02:22.454] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:02:22.504] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:02:22.504] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:02:22.504] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:02:22.534] (Main Well                        :   0) Stop Pump
[2018-01-12 18:02:22.554] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:02:22.594] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:02:22.594] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:02:22.594] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:02:22.634] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:02:22.684] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:02:22.794] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:02:23.044] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:02:23.044] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:02:23.044] (Flush Capillary                  :  33) @Run
[2018-01-12 18:02:23.044] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:02:23.094] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:02:23.094] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:02:23.094] (Flush Singulator                 :  34) @Run
[2018-01-12 18:02:23.094] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:02:23.194] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:23.464] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:02:23.514] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:23.514] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:23.824] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:02:23.874] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:02:23.874] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:23.924] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:02:24.024] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:02:24.124] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:02:24.174] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:02:24.174] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:02:24.174] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:02:24.194] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:02:24.214] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:02:24.214] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:02:24.214] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:02:24.234] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:02:24.284] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:02:24.414] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:02:24.664] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:02:24.664] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:02:24.664] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:02:24.664] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:02:24.714] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:02:24.714] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:02:24.714] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:02:24.714] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:02:24.814] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:25.084] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:02:25.134] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:25.134] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:25.444] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:02:25.494] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:02:25.494] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:25.544] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:02:25.644] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:02:25.744] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:02:25.794] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:02:25.794] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:02:25.794] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:02:25.814] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:02:25.834] (Main Well                        :   0) Stop routine
[2018-01-12 18:02:25.834] (Main Well                        :   0) @Stop
[2018-01-12 18:02:26.184] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:02:26.184] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:02:26.194] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:02:26.194] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:02:26.194] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:02:26.194] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:02:28.184] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:02:28.184] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:02:28.184] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:02:28.184] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:02:28.224] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:02:28.224] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:02:14.234] (Detector                         :  17) @Stop
[2018-01-12 18:02:32.814] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:02:32.814] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:02:32.814] (MainPre Routine                  :   0) @Run
[2018-01-12 18:02:32.814] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:02:39.014] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:02:39.014] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:02:39.014] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:02:39.654] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:02:39.654] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:02:39.664] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:02:41.394] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:02:41.394] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:02:41.394] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:02:41.554] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:02:41.604] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:02:41.624] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:02:41.874] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:02:41.874] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:02:41.874] (Initialize P1                    :   3) @Run
[2018-01-12 18:02:41.874] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:02:41.924] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:02:41.924] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:02:41.924] (Initialize P2                    :   4) @Run
[2018-01-12 18:02:41.924] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:02:42.104] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:42.334] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:42.454] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:02:42.504] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:42.504] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:42.554] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:02:42.604] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:42.604] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:42.794] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:02:42.844] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:42.844] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:42.894] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:02:42.944] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:42.944] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:42.994] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:02:43.044] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:43.044] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:43.094] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:02:43.144] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:43.144] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:43.194] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:02:43.244] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:43.244] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:43.294] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:02:43.344] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:43.344] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:43.414] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:02:43.464] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:43.464] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:43.654] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:02:43.704] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:43.704] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:43.754] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:02:43.804] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:43.804] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:43.854] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:02:43.904] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:43.904] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:43.954] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:02:44.004] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:44.004] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:44.054] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:02:44.104] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:44.104] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:44.154] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:02:44.204] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:44.204] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:44.274] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:02:44.324] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:44.324] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:44.514] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:02:44.564] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:44.564] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:44.614] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:02:44.664] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:02:44.664] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:44.714] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:02:44.764] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:02:44.764] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:02:44.764] (Initialize P1                    :   3) @Stop
[2018-01-12 18:02:44.814] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:02:44.864] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:02:44.864] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:02:44.864] (Initialize P2                    :   4) @Stop
[2018-01-12 18:02:45.124] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:02:45.324] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:02:45.344] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:02:45.344] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:02:45.344] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:02:45.344] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:02:45.344] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:45.344] (PreFillP1                        :   6) @Run
[2018-01-12 18:02:45.344] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:02:45.394] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:02:45.394] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:02:45.394] (PreFillP2                        :   7) @Run
[2018-01-12 18:02:45.394] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:02:45.494] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:45.764] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:45.814] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:45.814] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:46.134] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:46.184] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:46.184] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:46.434] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:46.484] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:46.484] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:46.634] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:46.684] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:46.684] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:46.854] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:46.904] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:46.904] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:47.194] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:47.244] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:47.244] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:47.494] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:47.544] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:02:47.544] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:47.594] (PreFillP1                        :   6) @Stop
[2018-01-12 18:02:47.694] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:47.744] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:02:47.744] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:47.914] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:47.964] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:02:47.964] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:48.154] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:48.204] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:02:48.204] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:48.354] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:48.404] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:02:48.404] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:48.504] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:48.554] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:02:48.554] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:48.704] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:48.754] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:02:48.754] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:48.964] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:49.014] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:02:49.014] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:02:49.014] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:02:49.044] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:02:49.064] (PreFillP2                        :   7) @Stop
[2018-01-12 18:02:49.104] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:02:49.104] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:02:49.104] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:02:49.124] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:49.174] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:02:49.194] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:02:49.444] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:02:49.444] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:49.444] (Flush Capillary                  :   9) @Run
[2018-01-12 18:02:49.444] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:02:49.494] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:02:49.494] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:02:49.494] (Flush Singulator                 :  10) @Run
[2018-01-12 18:02:49.494] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:02:49.594] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:49.844] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:49.894] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:49.894] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:50.044] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:50.094] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:50.094] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:50.264] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:50.314] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:50.314] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:50.604] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:50.654] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:50.654] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:50.904] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:50.954] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:50.954] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:51.104] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:51.154] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:51.154] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:51.464] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:51.514] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:51.514] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:51.564] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:02:51.664] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:02:51.764] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:51.814] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:02:51.814] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:51.924] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:51.974] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:02:51.974] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:02:51.974] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:02:52.004] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:02:52.104] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:02:52.104] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:02:52.104] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:02:52.124] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:02:52.174] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:02:52.194] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:02:52.444] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:02:52.444] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:02:52.444] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:02:52.444] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:02:52.494] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:02:52.494] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:02:52.494] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:02:52.494] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:02:52.594] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:52.884] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:02:52.934] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:52.934] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:53.224] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:02:53.274] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:53.274] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:53.424] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:02:53.474] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:53.474] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:53.624] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:02:53.674] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:53.674] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:53.844] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:02:53.894] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:53.894] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:53.944] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:02:54.184] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:02:54.234] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:02:54.234] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:54.284] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:02:54.384] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:02:54.434] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:02:54.434] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:02:54.434] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:02:54.454] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:02:54.454] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:02:54.454] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:02:54.454] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:02:54.454] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:02:54.454] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:02:54.454] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:54.454] (PreFillP1                        :   6) @Run
[2018-01-12 18:02:54.454] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:02:54.504] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:02:54.504] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:02:54.504] (PreFillP2                        :   7) @Run
[2018-01-12 18:02:54.504] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:02:54.604] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:54.894] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:54.944] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:54.944] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:55.234] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:55.284] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:55.284] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:55.434] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:55.484] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:55.484] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:55.634] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:55.684] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:55.684] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:55.854] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:55.904] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:55.904] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:56.194] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:56.244] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:56.244] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:56.494] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:56.544] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:02:56.544] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:56.694] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:56.744] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:02:56.744] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:56.794] (PreFillP1                        :   6) @Stop
[2018-01-12 18:02:56.914] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:56.964] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:02:56.964] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:57.254] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:57.304] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:02:57.304] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:57.454] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:57.504] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:02:57.504] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:57.604] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:57.654] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:02:57.654] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:57.804] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:57.854] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:02:57.854] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:02:58.064] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:02:58.114] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:02:58.114] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:02:58.114] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:02:58.154] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:02:58.164] (PreFillP2                        :   7) @Stop
[2018-01-12 18:02:58.204] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:02:58.204] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:02:58.204] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:02:58.224] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:58.274] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:02:58.294] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:02:58.545] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:02:58.545] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:58.545] (Flush Capillary                  :   9) @Run
[2018-01-12 18:02:58.545] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:02:58.595] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:02:58.595] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:02:58.595] (Flush Singulator                 :  10) @Run
[2018-01-12 18:02:58.595] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:02:58.695] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:58.945] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:58.995] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:58.995] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:59.145] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:59.195] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:59.195] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:59.365] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:59.415] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:59.415] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:02:59.705] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:02:59.755] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:02:59.755] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:00.005] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:03:00.055] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:03:00.055] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:00.205] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:03:00.255] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:03:00.255] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:00.425] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:03:00.475] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:03:00.475] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:00.765] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:03:00.815] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:03:00.815] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:00.865] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:03:00.965] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:03:01.065] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:03:01.115] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:03:01.115] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:03:01.115] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:03:01.155] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:03:01.175] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:03:01.175] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:03:01.175] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:03:01.215] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:03:01.265] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:03:01.375] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:03:01.625] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:03:01.625] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:03:01.625] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:03:01.625] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:03:01.675] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:03:01.675] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:03:01.675] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:03:01.675] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:03:01.775] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:02.045] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:03:02.095] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:03:02.095] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:02.405] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:03:02.455] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:03:02.455] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:02.705] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:03:02.755] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:03:02.755] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:02.905] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:03:02.955] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:03:02.955] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:03.125] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:03:03.175] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:03:03.175] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:03.235] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:03:03.475] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:03:03.525] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:03:03.525] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:03.575] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:03:03.675] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:03:03.725] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:03:03.725] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:03:03.725] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:03:03.775] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:03:03.775] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:03:03.775] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:03:03.775] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:03:03.775] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:03:03.775] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:03:03.775] (Prefill before Flush             :  14) @Run
[2018-01-12 18:03:03.775] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:03:03.775] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:03:03.775] (PreFillP1                        :  15) @Run
[2018-01-12 18:03:03.775] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:03:03.825] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:03:03.825] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:03:03.825] (PreFillP2                        :  16) @Run
[2018-01-12 18:03:03.825] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:03:03.925] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:04.215] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:03:04.265] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:04.265] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:04.455] (PreFillP1                        :  15) @Stop
[2018-01-12 18:03:04.555] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:03:04.605] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:03:04.605] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:04.655] (PreFillP2                        :  16) @Stop
[2018-01-12 18:03:04.755] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:03:04.805] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:03:04.805] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:03:04.805] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:03:04.825] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:03:04.845] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:03:04.845] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:02:14.234] (Detector                         :   2) @Stop
[2018-01-12 18:03:05.395] ** STARTING F01 MAIN ROUTINE **
[2018-01-12 18:03:05.395] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:03:05.395] (Main Well                        :   0) @Run
[2018-01-12 18:03:05.395] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:03:05.395] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:03:05.395] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:03:05.395] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:03:05.395] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:03:05.395] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:03:05.395] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:03:05.395] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:03:05.395] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:03:05.395] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:03:05.895] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:03:05.895] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:03:05.945] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:03:06.055] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:03:06.055] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:03:06.055] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:03:06.055] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:03:06.055] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:03:06.055] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:03:06.055] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:03:06.055] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:03:06.055] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:03:06.055] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:03:06.075] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:03:06.125] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:03:06.145] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:03:06.395] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:03:06.395] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:03:06.395] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:03:06.395] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:03:06.445] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:03:06.445] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:03:06.445] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:03:06.445] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:03:06.545] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:06.815] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:03:06.865] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:03:06.865] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:07.175] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:03:07.225] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:03:07.225] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:07.475] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:03:07.525] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:03:07.525] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:07.675] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:03:07.725] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:03:07.725] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:07.775] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:03:07.895] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:03:07.945] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:03:07.945] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:07.995] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:03:08.235] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:03:08.285] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:03:08.285] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:03:08.285] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:03:08.285] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:03:08.285] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:03:08.345] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:03:08.395] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:03:08.455] (Main Well                        :   0) Move to Well 61 with z-offset of 2540 um (Wait)
[2018-01-12 18:03:11.315] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:11.555] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:03:11.605] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:03:11.605] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:11.705] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:03:11.755] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:03:11.755] (Main Well                        :   0) Stop Pump
[2018-01-12 18:03:11.795] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:03:11.855] (Main Well                        :   0) Move to Well 61 with z-offset of 310 um (Wait)
[2018-01-12 18:03:20.935] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:21.175] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:03:21.225] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:03:21.225] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:03:21.225] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:03:21.225] (Pickup Sample                    :  21) @Run
[2018-01-12 18:03:21.225] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:03:25.895] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:03:28.515] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:03:28.595] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:03:28.795] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:28.895] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:28.945] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:28.945] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:29.045] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:29.095] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:29.095] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:29.195] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:29.245] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:29.245] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:29.355] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:29.405] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:29.405] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:29.595] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:29.645] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:29.645] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:29.745] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:29.795] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:29.795] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:29.895] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:29.945] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:29.945] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:30.045] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:30.095] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:30.095] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:30.305] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:30.355] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:30.355] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:30.455] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:30.505] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:30.505] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:30.605] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:30.655] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:30.655] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:30.755] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:30.805] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:30.805] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:31.025] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:31.075] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:31.075] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:31.175] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:31.225] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:31.225] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:31.325] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:31.375] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:31.375] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:31.475] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:31.525] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:31.525] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:31.735] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:31.785] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:31.785] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:31.885] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:31.935] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:31.935] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:32.035] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:32.085] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:32.085] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:32.185] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:32.235] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:32.235] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:32.445] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:32.495] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:32.495] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:32.595] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:32.645] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:32.645] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:32.745] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:32.795] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:32.795] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:32.895] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:32.945] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:32.945] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:33.155] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:33.205] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:33.205] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:33.305] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:33.355] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:33.355] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:33.455] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:33.505] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:33.505] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:33.605] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:33.655] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:33.655] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:33.865] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:33.915] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:33.915] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:34.015] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:34.065] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:34.065] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:34.165] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:34.215] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:34.215] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:34.315] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:34.365] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:34.365] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:34.575] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:34.625] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:34.625] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:34.725] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:34.775] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:34.775] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:34.875] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:34.925] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:34.925] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:35.025] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:35.075] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:35.075] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:35.285] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:35.335] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:35.335] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:35.435] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:35.485] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:35.485] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:35.585] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:35.635] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:35.635] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:35.735] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:35.785] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:35.785] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:35.995] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:36.045] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:36.045] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:36.145] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:36.195] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:36.195] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:36.295] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:36.345] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:36.345] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:36.445] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:36.495] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:36.495] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:36.705] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:36.755] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:36.755] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:36.855] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:36.905] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:36.905] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:37.005] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:37.055] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:37.055] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:37.155] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:37.205] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:37.205] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:37.415] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:37.465] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:37.465] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:37.565] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:37.615] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:37.615] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:37.715] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:37.765] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:37.765] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:37.865] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:37.915] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:03:37.915] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:03:38.125] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:38.175] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:03:38.175] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:03:38.275] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:03:38.325] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:03:38.325] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:03:38.325] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:03:38.625] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:03:38.705] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:03:38.955] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:03:38.975] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:03:39.025] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:03:39.025] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:03:39.025] (Singulate Sample                 :  22) @Run
[2018-01-12 18:03:39.025] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:03:39.025] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:03:39.025] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:03:39.085] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:03:39.135] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:03:39.195] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:03:39.295] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_F01_RAW.qlb"
[2018-01-12 18:03:39.405] (Detector                         :   2) @Run
[2018-01-12 18:03:39.405] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:04:19.305] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:04:20.105] (Detector                         :   2) @Stop
[2018-01-12 18:04:20.305] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:04:20.305] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:20.425] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:04:20.475] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:04:20.475] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:20.575] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:04:20.625] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:04:20.625] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:04:20.625] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:04:21.025] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:04:21.025] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:04:21.025] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:04:21.025] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:04:21.025] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:04:21.025] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:04:21.025] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:21.025] (PreFillP1                        :  24) @Run
[2018-01-12 18:04:21.025] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:04:21.075] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:04:21.075] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:04:21.075] (PreFillP2                        :  25) @Run
[2018-01-12 18:04:21.075] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:04:21.175] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:21.445] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:21.495] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:21.495] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:21.665] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:21.715] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:21.715] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:22.005] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:22.055] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:22.055] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:22.305] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:22.355] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:22.355] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:22.505] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:22.555] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:22.555] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:22.725] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:22.775] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:22.775] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:23.065] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:23.115] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:23.115] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:23.365] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:23.415] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:23.415] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:23.565] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:23.615] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:23.615] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:23.785] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:23.845] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:23.845] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:24.135] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:24.185] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:04:24.185] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:24.235] (PreFillP1                        :  24) @Stop
[2018-01-12 18:04:24.435] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:24.485] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:04:24.485] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:24.585] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:24.635] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:04:24.635] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:24.805] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:04:24.855] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:04:24.855] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:04:24.855] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:04:24.875] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:04:24.875] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:04:24.875] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:04:24.965] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:04:25.015] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:04:25.065] (PreFillP2                        :  25) @Stop
[2018-01-12 18:04:25.085] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:04:25.335] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:04:25.335] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:04:25.335] (Flush Capillary                  :  27) @Run
[2018-01-12 18:04:25.335] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:04:25.385] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:04:25.385] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:04:25.385] (Flush Singulator                 :  28) @Run
[2018-01-12 18:04:25.385] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:04:25.485] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:25.775] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:04:25.825] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:25.825] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:26.115] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:04:26.165] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:26.165] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:26.315] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:04:26.365] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:26.365] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:26.515] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:04:26.565] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:26.565] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:26.735] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:04:26.785] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:04:26.785] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:26.835] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:04:27.085] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:04:27.135] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:04:27.135] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:04:27.135] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:04:27.175] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:04:27.185] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:04:27.205] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:04:27.205] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:04:27.205] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:04:27.225] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:04:27.275] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:04:27.295] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:04:27.545] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:04:27.545] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:04:27.545] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:04:27.545] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:04:27.595] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:04:27.595] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:04:27.595] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:04:27.595] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:04:27.695] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:27.865] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:04:27.915] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:27.915] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:28.165] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:04:28.215] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:28.215] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:28.525] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:04:28.575] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:04:28.575] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:28.625] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:04:28.725] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:04:28.825] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:04:28.875] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:04:28.875] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:04:28.875] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:04:28.905] (Main Well                        :   0) Stop Pump
[2018-01-12 18:04:28.945] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:04:28.945] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:04:28.945] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:04:28.985] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:04:29.035] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:04:29.145] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:04:29.395] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:04:29.395] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:04:29.395] (Flush Capillary                  :  33) @Run
[2018-01-12 18:04:29.395] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:04:29.445] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:04:29.445] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:04:29.445] (Flush Singulator                 :  34) @Run
[2018-01-12 18:04:29.445] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:04:29.545] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:29.815] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:04:29.865] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:29.865] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:30.175] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:04:30.225] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:04:30.225] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:30.275] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:04:30.375] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:04:30.475] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:04:30.525] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:04:30.525] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:04:30.525] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:04:30.545] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:04:30.565] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:04:30.565] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:04:30.565] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:04:30.585] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:04:30.635] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:04:30.765] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:04:31.015] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:04:31.015] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:04:31.015] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:04:31.015] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:04:31.065] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:04:31.065] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:04:31.065] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:04:31.065] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:04:31.165] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:31.435] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:04:31.485] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:31.485] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:31.795] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:04:31.845] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:04:31.845] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:31.895] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:04:31.995] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:04:32.095] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:04:32.145] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:04:32.145] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:04:32.145] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:04:32.165] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:04:32.185] (Main Well                        :   0) Stop routine
[2018-01-12 18:04:32.185] (Main Well                        :   0) @Stop
[2018-01-12 18:04:32.445] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:04:32.445] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:04:32.465] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:04:32.465] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:04:32.465] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:04:32.465] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:04:34.445] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:04:34.445] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:04:34.445] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:04:34.445] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:04:34.485] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:04:34.485] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:04:20.105] (Detector                         :  17) @Stop
[2018-01-12 18:04:41.235] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:04:41.235] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:04:41.235] (MainPre Routine                  :   0) @Run
[2018-01-12 18:04:41.235] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:04:47.295] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:04:47.295] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:04:47.295] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:04:47.935] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:04:47.935] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:04:47.945] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:04:49.675] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:04:49.675] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:04:49.675] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:04:49.835] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:04:49.885] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:04:49.905] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:04:50.155] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:04:50.155] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:04:50.155] (Initialize P1                    :   3) @Run
[2018-01-12 18:04:50.155] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:04:50.205] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:04:50.205] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:04:50.205] (Initialize P2                    :   4) @Run
[2018-01-12 18:04:50.205] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:04:50.385] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:50.615] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:50.735] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:04:50.785] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:50.785] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:50.835] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:04:50.885] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:50.885] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:51.075] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:04:51.125] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:51.125] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:51.205] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:04:51.255] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:51.255] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:51.315] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:04:51.365] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:51.365] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:51.415] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:04:51.465] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:51.465] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:51.515] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:04:51.565] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:51.565] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:51.615] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:04:51.665] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:51.665] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:51.735] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:04:51.785] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:51.785] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:51.975] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:04:52.025] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:52.025] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:52.075] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:04:52.125] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:52.125] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:52.175] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:04:52.225] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:52.225] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:52.275] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:04:52.325] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:52.325] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:52.375] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:04:52.425] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:52.425] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:52.475] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:04:52.525] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:52.525] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:52.595] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:04:52.645] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:52.645] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:52.835] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:04:52.885] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:04:52.885] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:04:52.885] (Initialize P1                    :   3) @Stop
[2018-01-12 18:04:52.935] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:04:52.985] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:04:52.985] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:53.085] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:04:53.135] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:04:53.135] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:04:53.135] (Initialize P2                    :   4) @Stop
[2018-01-12 18:04:53.205] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:04:53.405] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:04:53.425] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:04:53.425] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:04:53.425] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:04:53.425] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:04:53.425] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:53.425] (PreFillP1                        :   6) @Run
[2018-01-12 18:04:53.425] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:04:53.475] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:04:53.475] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:04:53.475] (PreFillP2                        :   7) @Run
[2018-01-12 18:04:53.475] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:04:53.575] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:53.845] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:53.895] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:53.895] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:54.065] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:54.115] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:54.115] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:54.405] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:54.455] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:54.455] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:54.705] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:54.755] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:54.755] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:54.905] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:54.955] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:54.955] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:55.125] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:55.175] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:55.175] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:55.465] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:55.515] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:04:55.515] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:55.665] (PreFillP1                        :   6) @Stop
[2018-01-12 18:04:55.765] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:55.815] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:04:55.815] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:55.965] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:56.015] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:04:56.015] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:56.225] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:56.275] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:04:56.275] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:56.425] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:56.475] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:04:56.475] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:56.575] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:56.625] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:04:56.625] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:56.775] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:56.825] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:04:56.825] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:57.035] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:04:57.085] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:04:57.085] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:04:57.085] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:04:57.125] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:04:57.135] (PreFillP2                        :   7) @Stop
[2018-01-12 18:04:57.175] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:04:57.175] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:04:57.175] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:04:57.195] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:04:57.245] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:04:57.265] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:04:57.515] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:04:57.515] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:04:57.515] (Flush Capillary                  :   9) @Run
[2018-01-12 18:04:57.515] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:04:57.565] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:04:57.565] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:04:57.565] (Flush Singulator                 :  10) @Run
[2018-01-12 18:04:57.565] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:04:57.665] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:57.915] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:04:57.965] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:57.965] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:58.115] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:04:58.165] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:58.165] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:58.335] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:04:58.385] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:58.385] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:58.675] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:04:58.725] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:58.725] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:58.975] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:04:59.025] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:59.025] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:59.175] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:04:59.225] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:59.225] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:59.535] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:04:59.585] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:04:59.585] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:04:59.635] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:04:59.735] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:04:59.835] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:04:59.885] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:04:59.885] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:04:59.985] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:05:00.035] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:05:00.035] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:05:00.035] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:05:00.075] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:05:00.165] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:05:00.165] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:05:00.165] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:05:00.185] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:00.235] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:05:00.255] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:05:00.505] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:05:00.505] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:00.505] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:05:00.505] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:05:00.555] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:05:00.555] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:05:00.555] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:05:00.555] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:05:00.655] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:00.945] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:00.995] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:00.995] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:01.285] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:01.335] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:01.335] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:01.485] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:01.535] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:01.535] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:01.685] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:01.735] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:01.735] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:01.905] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:01.955] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:01.955] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:02.005] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:05:02.245] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:02.295] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:05:02.295] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:02.345] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:05:02.445] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:02.495] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:05:02.495] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:05:02.495] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:05:02.515] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:05:02.515] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:05:02.515] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:05:02.515] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:05:02.515] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:05:02.515] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:05:02.515] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:02.515] (PreFillP1                        :   6) @Run
[2018-01-12 18:05:02.515] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:05:02.565] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:05:02.565] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:05:02.565] (PreFillP2                        :   7) @Run
[2018-01-12 18:05:02.565] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:05:02.665] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:02.955] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:03.005] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:03.005] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:03.295] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:03.345] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:03.345] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:03.495] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:03.545] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:03.545] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:03.695] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:03.745] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:03.745] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:03.915] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:03.965] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:03.965] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:04.255] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:04.305] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:04.305] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:04.555] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:04.605] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:04.605] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:04.755] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:04.805] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:05:04.805] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:04.855] (PreFillP1                        :   6) @Stop
[2018-01-12 18:05:04.975] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:05.025] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:05:05.025] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:05.316] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:05.366] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:05:05.366] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:05.516] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:05.566] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:05:05.566] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:05.666] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:05.716] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:05:05.716] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:05.866] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:05.916] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:05:05.916] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:06.126] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:05:06.176] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:05:06.176] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:05:06.176] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:05:06.216] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:05:06.226] (PreFillP2                        :   7) @Stop
[2018-01-12 18:05:06.266] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:05:06.266] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:05:06.266] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:05:06.286] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:05:06.336] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:05:06.356] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:05:06.606] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:05:06.606] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:05:06.606] (Flush Capillary                  :   9) @Run
[2018-01-12 18:05:06.606] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:05:06.656] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:05:06.656] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:05:06.656] (Flush Singulator                 :  10) @Run
[2018-01-12 18:05:06.656] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:05:06.756] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:07.006] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:05:07.056] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:07.056] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:07.206] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:05:07.256] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:07.256] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:07.426] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:05:07.476] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:07.476] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:07.766] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:05:07.816] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:07.816] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:08.066] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:05:08.116] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:08.116] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:08.266] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:05:08.316] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:08.316] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:08.486] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:05:08.536] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:08.536] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:08.826] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:05:08.876] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:05:08.876] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:08.926] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:05:09.026] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:05:09.126] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:05:09.176] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:05:09.176] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:05:09.176] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:05:09.216] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:05:09.236] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:05:09.236] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:05:09.236] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:05:09.276] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:09.326] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:05:09.436] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:05:09.686] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:05:09.686] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:09.686] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:05:09.686] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:05:09.736] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:05:09.736] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:05:09.736] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:05:09.736] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:05:09.836] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:10.106] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:10.156] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:10.156] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:10.466] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:10.516] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:10.516] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:10.766] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:10.816] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:10.816] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:10.966] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:11.016] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:05:11.016] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:11.326] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:11.376] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:05:11.376] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:11.426] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:05:11.526] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:05:11.626] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:05:11.676] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:05:11.676] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:05:11.676] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:05:11.686] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:05:11.686] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:05:11.686] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:05:11.686] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:05:11.686] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:05:11.686] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:05:11.686] (Prefill before Flush             :  14) @Run
[2018-01-12 18:05:11.686] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:05:11.686] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:05:11.686] (PreFillP1                        :  15) @Run
[2018-01-12 18:05:11.686] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:05:11.736] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:05:11.736] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:05:11.736] (PreFillP2                        :  16) @Run
[2018-01-12 18:05:11.736] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:05:11.836] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:12.266] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:05:12.316] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:05:12.316] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:12.366] (PreFillP1                        :  15) @Stop
[2018-01-12 18:05:12.466] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:05:12.516] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:05:12.516] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:05:12.516] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:05:12.536] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:05:12.566] (PreFillP2                        :  16) @Stop
[2018-01-12 18:05:12.586] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:05:12.586] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:04:20.105] (Detector                         :   2) @Stop
[2018-01-12 18:05:12.816] ** STARTING G01 MAIN ROUTINE **
[2018-01-12 18:05:12.816] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:05:12.816] (Main Well                        :   0) @Run
[2018-01-12 18:05:12.816] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:05:12.816] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:05:12.816] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:05:12.816] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:05:12.816] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:05:12.816] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:05:12.816] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:05:12.816] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:05:12.816] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:05:12.816] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:05:13.326] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:05:13.326] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:05:13.366] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:05:13.486] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:05:13.486] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:05:13.486] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:05:13.486] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:05:13.486] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:05:13.486] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:05:13.486] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:05:13.486] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:05:13.486] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:05:13.486] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:05:13.506] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:05:13.556] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:05:13.576] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:05:13.826] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:05:13.826] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:05:13.826] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:05:13.826] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:05:13.876] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:05:13.876] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:05:13.876] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:05:13.876] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:05:13.976] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:14.246] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:05:14.296] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:05:14.296] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:14.606] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:05:14.656] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:05:14.656] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:14.906] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:05:14.956] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:05:14.956] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:15.106] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:05:15.156] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:05:15.156] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:15.206] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:05:15.326] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:05:15.376] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:05:15.376] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:15.426] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:05:15.666] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:05:15.716] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:05:15.716] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:05:15.716] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:05:15.716] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:05:15.716] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:05:15.776] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:05:15.826] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:05:15.886] (Main Well                        :   0) Move to Well 73 with z-offset of 2540 um (Wait)
[2018-01-12 18:05:18.986] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:19.226] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:05:19.276] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:05:19.276] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:19.376] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:05:19.426] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:05:19.426] (Main Well                        :   0) Stop Pump
[2018-01-12 18:05:19.466] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:05:19.526] (Main Well                        :   0) Move to Well 73 with z-offset of 310 um (Wait)
[2018-01-12 18:05:28.726] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:28.966] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:05:29.016] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:05:29.016] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:05:29.016] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:05:29.016] (Pickup Sample                    :  21) @Run
[2018-01-12 18:05:29.016] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:05:33.686] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:05:36.486] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:05:36.566] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:05:36.766] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:36.866] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:36.916] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:36.916] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:37.016] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:37.066] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:37.066] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:37.166] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:37.216] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:37.216] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:37.326] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:37.376] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:37.376] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:37.566] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:37.616] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:37.616] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:37.716] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:37.766] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:37.766] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:37.866] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:37.916] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:37.916] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:38.016] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:38.066] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:38.066] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:38.276] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:38.326] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:38.326] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:38.426] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:38.476] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:38.476] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:38.576] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:38.626] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:38.626] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:38.726] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:38.776] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:38.776] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:38.986] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:39.036] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:39.036] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:39.136] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:39.186] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:39.186] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:39.286] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:39.336] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:39.336] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:39.436] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:39.486] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:39.486] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:39.696] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:39.746] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:39.746] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:39.846] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:39.896] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:39.896] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:39.996] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:40.046] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:40.046] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:40.146] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:40.196] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:40.196] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:40.406] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:40.456] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:40.456] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:40.556] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:40.606] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:40.606] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:40.706] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:40.756] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:40.756] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:40.856] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:40.906] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:40.906] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:41.116] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:41.166] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:41.166] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:41.266] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:41.316] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:41.316] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:41.416] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:41.466] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:41.466] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:41.566] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:41.616] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:41.616] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:41.826] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:41.876] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:41.876] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:41.976] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:42.026] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:42.026] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:42.126] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:42.176] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:42.176] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:42.276] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:42.326] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:42.326] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:42.536] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:42.586] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:42.586] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:42.686] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:42.736] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:42.736] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:42.836] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:42.886] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:42.886] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:42.986] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:43.036] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:43.036] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:43.246] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:43.296] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:43.296] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:43.396] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:43.446] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:43.446] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:43.546] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:43.596] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:43.596] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:43.696] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:43.746] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:43.746] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:43.956] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:44.006] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:44.006] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:44.106] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:44.156] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:44.156] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:44.256] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:44.306] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:44.306] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:44.406] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:44.456] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:44.456] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:44.666] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:44.716] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:44.716] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:44.816] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:44.866] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:44.866] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:44.966] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:45.016] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:45.016] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:45.116] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:45.166] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:45.166] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:45.376] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:45.426] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:45.426] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:45.526] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:45.576] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:45.576] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:45.676] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:45.726] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:45.726] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:45.826] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:45.876] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:05:45.876] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:05:46.086] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:46.136] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:05:46.136] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:05:46.236] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:05:46.286] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:05:46.286] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:05:46.286] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:05:46.616] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:05:46.666] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:05:46.916] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:05:46.936] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:05:46.986] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:05:46.986] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:05:46.986] (Singulate Sample                 :  22) @Run
[2018-01-12 18:05:46.986] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:05:46.986] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:05:46.986] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:05:47.046] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:05:47.096] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:05:47.156] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:05:47.256] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_G01_RAW.qlb"
[2018-01-12 18:05:47.366] (Detector                         :   2) @Run
[2018-01-12 18:05:47.366] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:06:27.266] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:06:28.136] (Detector                         :   2) @Stop
[2018-01-12 18:06:28.266] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:06:28.266] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:28.406] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:06:28.456] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:06:28.456] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:28.556] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:06:28.606] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:06:28.606] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:06:28.606] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:06:28.986] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:06:28.986] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:06:28.986] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:06:28.986] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:06:28.986] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:06:28.986] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:06:28.986] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:28.986] (PreFillP1                        :  24) @Run
[2018-01-12 18:06:28.986] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:06:29.036] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:06:29.036] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:06:29.036] (PreFillP2                        :  25) @Run
[2018-01-12 18:06:29.036] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:06:29.136] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:29.406] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:29.456] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:06:29.456] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:29.606] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:29.656] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:06:29.656] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:29.986] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:30.036] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:06:30.036] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:30.286] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:30.336] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:06:30.336] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:30.486] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:30.536] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:06:30.536] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:30.706] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:30.756] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:06:30.756] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:31.046] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:31.096] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:06:31.096] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:31.346] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:31.396] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:06:31.396] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:31.546] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:31.596] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:06:31.596] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:31.766] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:31.816] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:06:31.816] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:32.106] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:32.156] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:06:32.156] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:32.206] (PreFillP1                        :  24) @Stop
[2018-01-12 18:06:32.406] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:32.456] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:06:32.456] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:32.556] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:32.606] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:06:32.606] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:32.776] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:06:32.826] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:06:32.826] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:06:32.826] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:06:32.836] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:06:32.836] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:06:32.836] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:06:32.936] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:06:32.986] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:06:33.036] (PreFillP2                        :  25) @Stop
[2018-01-12 18:06:33.056] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:06:33.306] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:06:33.306] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:06:33.306] (Flush Capillary                  :  27) @Run
[2018-01-12 18:06:33.306] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:06:33.356] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:06:33.356] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:06:33.356] (Flush Singulator                 :  28) @Run
[2018-01-12 18:06:33.356] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:06:33.456] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:33.746] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:06:33.796] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:06:33.796] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:34.086] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:06:34.136] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:06:34.136] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:34.286] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:06:34.336] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:06:34.336] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:34.486] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:06:34.536] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:06:34.536] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:34.706] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:06:34.756] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:06:34.756] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:34.806] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:06:35.046] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:06:35.096] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:06:35.096] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:06:35.096] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:06:35.136] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:06:35.146] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:06:35.166] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:06:35.166] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:06:35.166] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:06:35.186] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:06:35.236] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:06:35.256] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:06:35.506] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:06:35.506] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:06:35.506] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:06:35.506] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:06:35.556] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:06:35.556] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:06:35.556] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:06:35.556] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:06:35.656] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:35.826] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:06:35.876] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:06:35.876] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:36.126] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:06:36.176] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:06:36.176] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:36.486] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:06:36.536] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:06:36.536] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:36.586] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:06:36.686] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:06:36.786] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:06:36.836] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:06:36.836] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:06:36.836] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:06:36.866] (Main Well                        :   0) Stop Pump
[2018-01-12 18:06:36.906] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:06:36.906] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:06:36.906] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:06:36.946] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:06:36.996] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:06:37.106] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:06:37.356] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:06:37.356] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:06:37.356] (Flush Capillary                  :  33) @Run
[2018-01-12 18:06:37.356] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:06:37.406] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:06:37.406] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:06:37.406] (Flush Singulator                 :  34) @Run
[2018-01-12 18:06:37.406] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:06:37.506] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:37.776] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:06:37.826] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:06:37.826] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:38.136] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:06:38.186] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:06:38.186] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:38.236] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:06:38.336] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:06:38.436] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:06:38.486] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:06:38.486] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:06:38.486] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:06:38.506] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:06:38.526] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:06:38.526] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:06:38.526] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:06:38.546] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:06:38.596] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:06:38.726] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:06:38.976] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:06:38.976] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:06:38.976] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:06:38.976] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:06:39.026] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:06:39.026] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:06:39.026] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:06:39.026] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:06:39.126] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:39.396] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:06:39.446] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:06:39.446] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:39.756] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:06:39.806] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:06:39.806] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:39.856] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:06:39.956] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:06:40.056] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:06:40.106] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:06:40.106] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:06:40.106] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:06:40.126] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:06:40.146] (Main Well                        :   0) Stop routine
[2018-01-12 18:06:40.146] (Main Well                        :   0) @Stop
[2018-01-12 18:06:40.386] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:06:40.386] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:06:40.396] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:06:40.396] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:06:40.396] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:06:40.396] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:06:42.386] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:06:42.386] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:06:42.386] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:06:42.386] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:06:42.426] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:06:42.426] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:06:28.136] (Detector                         :  17) @Stop
[2018-01-12 18:06:47.136] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:06:47.136] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:06:47.136] (MainPre Routine                  :   0) @Run
[2018-01-12 18:06:47.136] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:06:53.116] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:06:53.116] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:06:53.116] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:06:53.756] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:06:53.756] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:06:53.766] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:06:55.496] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:06:55.496] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:06:55.496] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:06:55.656] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:06:55.706] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:06:55.726] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:06:55.976] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:06:55.976] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:06:55.976] (Initialize P1                    :   3) @Run
[2018-01-12 18:06:55.976] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:06:56.026] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:06:56.026] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:06:56.026] (Initialize P2                    :   4) @Run
[2018-01-12 18:06:56.026] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:06:56.206] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:56.436] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:56.556] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:06:56.606] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:56.606] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:56.656] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:06:56.706] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:56.706] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:56.896] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:06:56.946] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:56.946] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:56.996] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:06:57.046] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:57.046] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:57.096] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:06:57.146] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:57.146] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:57.196] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:06:57.246] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:57.246] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:57.296] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:06:57.346] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:57.346] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:57.396] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:06:57.446] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:57.446] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:57.516] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:06:57.566] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:57.566] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:57.756] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:06:57.806] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:57.806] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:57.856] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:06:57.906] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:57.906] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:57.956] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:06:58.006] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:58.006] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:58.056] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:06:58.106] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:58.106] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:58.156] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:06:58.206] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:58.206] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:58.256] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:06:58.306] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:58.306] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:58.376] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:06:58.426] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:58.426] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:58.616] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:06:58.666] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:58.666] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:58.716] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:06:58.766] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:06:58.766] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:06:58.816] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:06:58.866] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:06:58.866] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:06:58.866] (Initialize P1                    :   3) @Stop
[2018-01-12 18:06:58.926] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:06:58.976] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:06:58.976] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:06:58.976] (Initialize P2                    :   4) @Stop
[2018-01-12 18:06:59.226] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:06:59.428] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:06:59.448] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:06:59.448] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:06:59.448] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:06:59.448] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:06:59.448] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:06:59.448] (PreFillP1                        :   6) @Run
[2018-01-12 18:06:59.448] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:06:59.498] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:06:59.498] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:06:59.498] (PreFillP2                        :   7) @Run
[2018-01-12 18:06:59.498] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:06:59.598] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:06:59.868] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:06:59.918] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:06:59.918] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:00.228] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:00.278] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:00.278] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:00.528] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:00.578] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:00.578] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:00.728] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:00.778] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:00.778] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:00.958] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:01.008] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:01.008] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:01.298] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:01.348] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:01.348] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:01.598] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:01.648] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:07:01.648] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:01.698] (PreFillP1                        :   6) @Stop
[2018-01-12 18:07:01.798] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:01.848] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:07:01.848] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:02.028] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:02.078] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:07:02.078] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:02.268] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:02.318] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:07:02.318] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:02.468] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:02.518] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:07:02.518] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:02.618] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:02.668] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:07:02.668] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:02.818] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:02.868] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:07:02.868] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:03.088] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:03.138] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:07:03.138] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:07:03.138] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:07:03.148] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:07:03.188] (PreFillP2                        :   7) @Stop
[2018-01-12 18:07:03.228] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:07:03.228] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:07:03.228] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:07:03.248] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:03.298] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:07:03.318] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:07:03.568] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:07:03.568] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:03.568] (Flush Capillary                  :   9) @Run
[2018-01-12 18:07:03.568] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:07:03.618] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:07:03.618] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:07:03.618] (Flush Singulator                 :  10) @Run
[2018-01-12 18:07:03.618] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:07:03.718] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:03.968] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:04.018] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:04.018] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:04.168] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:04.218] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:04.218] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:04.388] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:04.438] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:04.438] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:04.728] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:04.778] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:04.778] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:05.028] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:05.078] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:05.078] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:05.228] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:05.278] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:05.278] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:05.448] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:05.498] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:05.498] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:05.788] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:05.838] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:07:05.838] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:05.888] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:07:05.988] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:07:06.088] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:06.138] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:07:06.138] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:07:06.138] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:07:06.178] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:07:06.198] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:07:06.198] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:07:06.198] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:07:06.238] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:06.288] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:07:06.398] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:07:06.648] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:07:06.648] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:06.648] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:07:06.648] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:07:06.698] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:07:06.698] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:07:06.698] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:07:06.698] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:07:06.798] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:07.068] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:07.118] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:07.118] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:07.428] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:07.478] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:07.478] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:07.728] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:07.778] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:07.778] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:07.928] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:07.978] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:07.978] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:08.148] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:08.198] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:08.198] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:08.248] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:07:08.488] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:08.538] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:07:08.538] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:08.588] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:07:08.688] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:08.738] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:07:08.738] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:07:08.738] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:07:08.748] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:07:08.748] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:07:08.748] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:07:08.748] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:07:08.748] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:07:08.748] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:07:08.748] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:08.748] (PreFillP1                        :   6) @Run
[2018-01-12 18:07:08.748] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:07:08.798] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:07:08.798] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:07:08.798] (PreFillP2                        :   7) @Run
[2018-01-12 18:07:08.798] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:07:08.898] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:09.188] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:09.238] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:09.238] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:09.528] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:09.578] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:09.578] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:09.728] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:09.778] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:09.778] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:09.928] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:09.978] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:09.978] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:10.148] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:10.198] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:10.198] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:10.488] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:10.538] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:10.538] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:10.788] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:10.838] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:10.838] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:10.988] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:11.038] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:07:11.038] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:11.088] (PreFillP1                        :   6) @Stop
[2018-01-12 18:07:11.208] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:11.258] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:07:11.258] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:11.548] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:11.598] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:07:11.598] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:11.748] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:11.798] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:07:11.798] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:11.898] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:11.948] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:07:11.948] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:12.098] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:12.148] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:07:12.148] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:12.358] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:07:12.408] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:07:12.408] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:07:12.408] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:07:12.448] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:07:12.458] (PreFillP2                        :   7) @Stop
[2018-01-12 18:07:12.498] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:07:12.498] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:07:12.498] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:07:12.518] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:12.568] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:07:12.588] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:07:12.838] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:07:12.838] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:12.838] (Flush Capillary                  :   9) @Run
[2018-01-12 18:07:12.838] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:07:12.888] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:07:12.888] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:07:12.888] (Flush Singulator                 :  10) @Run
[2018-01-12 18:07:12.888] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:07:12.988] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:13.238] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:13.288] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:13.288] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:13.438] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:13.488] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:13.488] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:13.658] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:13.708] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:13.708] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:13.998] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:14.048] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:14.048] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:14.298] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:14.348] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:14.348] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:14.498] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:14.548] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:14.548] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:14.718] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:14.768] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:14.768] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:15.058] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:15.108] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:07:15.108] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:15.158] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:07:15.258] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:07:15.358] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:07:15.408] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:07:15.408] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:07:15.408] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:07:15.448] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:07:15.468] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:07:15.468] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:07:15.468] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:07:15.508] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:15.558] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:07:15.668] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:07:15.918] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:07:15.918] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:15.918] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:07:15.918] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:07:15.968] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:07:15.968] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:07:15.968] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:07:15.968] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:07:16.068] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:16.338] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:16.388] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:16.388] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:16.698] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:16.748] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:16.748] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:16.998] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:17.048] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:17.048] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:17.198] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:17.248] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:17.248] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:17.418] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:17.468] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:07:17.468] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:17.518] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:07:17.758] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:17.808] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:07:17.808] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:17.858] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:07:17.958] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:07:18.008] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:07:18.008] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:07:18.008] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:07:18.018] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:07:18.018] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:07:18.018] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:07:18.018] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:07:18.018] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:07:18.018] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:07:18.018] (Prefill before Flush             :  14) @Run
[2018-01-12 18:07:18.018] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:07:18.018] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:07:18.018] (PreFillP1                        :  15) @Run
[2018-01-12 18:07:18.018] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:07:18.068] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:07:18.068] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:07:18.068] (PreFillP2                        :  16) @Run
[2018-01-12 18:07:18.068] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:07:18.168] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:18.458] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:07:18.508] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:18.508] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:18.698] (PreFillP1                        :  15) @Stop
[2018-01-12 18:07:18.798] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:07:18.848] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:07:18.848] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:18.898] (PreFillP2                        :  16) @Stop
[2018-01-12 18:07:18.998] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:07:19.048] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:07:19.048] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:07:19.048] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:07:19.068] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:07:19.088] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:07:19.088] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:06:28.136] (Detector                         :   2) @Stop
[2018-01-12 18:07:19.218] ** STARTING H01 MAIN ROUTINE **
[2018-01-12 18:07:19.218] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:07:19.218] (Main Well                        :   0) @Run
[2018-01-12 18:07:19.218] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:07:19.218] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:07:19.218] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:07:19.218] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:07:19.218] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:07:19.218] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:07:19.218] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:07:19.218] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:07:19.218] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:07:19.218] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:07:19.778] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:07:19.778] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:07:19.818] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:07:19.948] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:07:19.948] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:07:19.948] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:07:19.948] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:07:19.948] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:07:19.948] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:07:19.948] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:07:19.948] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:07:19.948] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:07:19.948] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:07:19.968] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:07:20.018] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:07:20.038] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:07:20.288] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:07:20.288] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:07:20.288] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:07:20.288] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:07:20.338] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:07:20.338] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:07:20.338] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:07:20.338] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:07:20.438] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:20.708] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:07:20.758] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:07:20.758] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:21.068] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:07:21.118] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:07:21.118] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:21.368] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:07:21.418] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:07:21.418] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:21.568] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:07:21.618] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:07:21.618] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:21.668] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:07:21.788] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:07:21.838] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:07:21.838] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:21.888] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:07:22.128] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:07:22.178] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:07:22.178] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:07:22.178] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:07:22.178] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:07:22.178] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:07:22.238] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:07:22.288] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:07:22.348] (Main Well                        :   0) Move to Well 85 with z-offset of 2540 um (Wait)
[2018-01-12 18:07:25.288] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:25.528] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:07:25.578] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:07:25.578] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:25.678] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:07:25.728] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:07:25.728] (Main Well                        :   0) Stop Pump
[2018-01-12 18:07:25.768] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:07:25.828] (Main Well                        :   0) Move to Well 85 with z-offset of 310 um (Wait)
[2018-01-12 18:07:35.188] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:35.428] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:07:35.478] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:07:35.478] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:07:35.478] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:07:35.478] (Pickup Sample                    :  21) @Run
[2018-01-12 18:07:35.478] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:07:40.148] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:07:42.948] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:07:43.028] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:07:43.228] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:43.328] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:43.378] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:43.378] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:43.478] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:43.528] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:43.528] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:43.628] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:43.678] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:43.678] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:43.788] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:43.838] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:43.838] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:44.028] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:44.078] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:44.078] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:44.178] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:44.228] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:44.228] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:44.328] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:44.378] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:44.378] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:44.478] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:44.528] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:44.528] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:44.738] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:44.788] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:44.788] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:44.888] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:44.938] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:44.938] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:45.038] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:45.088] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:45.088] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:45.188] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:45.238] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:45.238] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:45.448] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:45.498] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:45.498] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:45.598] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:45.648] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:45.648] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:45.748] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:45.798] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:45.798] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:45.898] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:45.948] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:45.948] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:46.168] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:46.218] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:46.218] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:46.318] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:46.368] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:46.368] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:46.468] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:46.518] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:46.518] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:46.618] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:46.668] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:46.668] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:46.878] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:46.928] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:46.928] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:47.028] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:47.078] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:47.078] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:47.178] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:47.228] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:47.228] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:47.328] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:47.378] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:47.378] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:47.588] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:47.638] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:47.638] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:47.738] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:47.788] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:47.788] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:47.888] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:47.938] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:47.938] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:48.038] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:48.088] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:48.088] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:48.298] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:48.348] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:48.348] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:48.448] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:48.498] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:48.498] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:48.598] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:48.648] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:48.648] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:48.748] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:48.798] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:48.798] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:49.008] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:49.058] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:49.058] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:49.158] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:49.208] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:49.208] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:49.308] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:49.358] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:49.358] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:49.458] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:49.508] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:49.508] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:49.718] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:49.768] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:49.768] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:49.868] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:49.918] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:49.918] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:50.018] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:50.068] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:50.068] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:50.168] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:50.218] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:50.218] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:50.428] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:50.478] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:50.478] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:50.578] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:50.628] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:50.628] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:50.728] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:50.778] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:50.778] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:50.878] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:50.928] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:50.928] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:51.138] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:51.188] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:51.188] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:51.288] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:51.338] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:51.338] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:51.438] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:51.488] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:51.488] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:51.588] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:51.638] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:51.638] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:51.848] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:51.898] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:51.898] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:52.008] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:52.058] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:52.058] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:52.158] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:52.208] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:52.208] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:52.308] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:52.358] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:07:52.358] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:07:52.568] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:52.618] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:07:52.618] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:07:52.718] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:07:52.768] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:07:52.768] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:07:52.768] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:07:53.078] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:07:53.148] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:07:53.398] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:07:53.418] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:07:53.468] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:07:53.468] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:07:53.468] (Singulate Sample                 :  22) @Run
[2018-01-12 18:07:53.468] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:07:53.468] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:07:53.468] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:07:53.528] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:07:53.578] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:07:53.638] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:07:53.738] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_H01_RAW.qlb"
[2018-01-12 18:07:53.848] (Detector                         :   2) @Run
[2018-01-12 18:07:53.848] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:08:33.750] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:08:34.480] (Detector                         :   2) @Stop
[2018-01-12 18:08:34.550] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:08:34.550] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:08:34.650] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:08:34.700] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:08:34.700] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:34.930] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:08:34.980] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:08:34.980] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:08:34.980] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:08:35.270] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:08:35.270] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:08:35.270] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:08:35.270] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:08:35.270] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:08:35.270] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:08:35.270] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:35.270] (PreFillP1                        :  24) @Run
[2018-01-12 18:08:35.270] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:08:35.320] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:08:35.320] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:08:35.320] (PreFillP2                        :  25) @Run
[2018-01-12 18:08:35.320] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:08:35.420] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:35.850] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:35.900] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:08:35.900] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:36.150] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:36.200] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:08:36.200] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:36.350] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:36.400] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:08:36.400] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:36.570] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:36.620] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:08:36.620] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:36.910] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:36.960] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:08:36.960] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:37.240] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:37.290] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:08:37.290] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:37.440] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:37.490] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:08:37.490] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:37.660] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:37.710] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:08:37.710] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:38.010] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:38.060] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:08:38.060] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:38.310] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:38.360] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:08:38.360] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:08:38.410] (PreFillP1                        :  24) @Stop
[2018-01-12 18:08:38.510] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:38.560] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:08:38.560] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:08:38.730] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:38.780] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:08:38.780] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:08:38.970] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:39.020] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:08:39.020] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:08:39.070] (PreFillP2                        :  25) @Stop
[2018-01-12 18:08:39.170] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:08:39.220] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:08:39.220] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:08:39.220] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:08:39.270] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:08:39.270] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:08:39.270] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:08:39.290] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:08:39.340] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:08:39.360] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:08:39.610] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:08:39.610] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:08:39.610] (Flush Capillary                  :  27) @Run
[2018-01-12 18:08:39.610] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:08:39.660] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:08:39.660] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:08:39.660] (Flush Singulator                 :  28) @Run
[2018-01-12 18:08:39.660] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:08:39.760] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:40.030] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:08:40.080] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:08:40.080] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:40.250] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:08:40.300] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:08:40.300] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:40.590] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:08:40.640] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:08:40.640] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:40.890] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:08:40.940] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:08:40.940] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:40.990] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:08:41.090] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:08:41.140] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:08:41.140] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:08:41.190] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:08:41.310] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:08:41.360] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:08:41.360] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:08:41.360] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:08:41.370] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:08:41.470] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:08:41.470] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:08:41.470] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:08:41.490] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:08:41.540] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:08:41.560] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:08:41.810] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:08:41.810] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:08:41.810] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:08:41.810] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:08:41.860] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:08:41.860] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:08:41.860] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:08:41.860] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:08:41.960] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:42.250] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:08:42.300] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:08:42.300] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:42.590] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:08:42.640] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:08:42.640] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:08:42.690] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:08:42.790] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:08:42.840] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:08:42.840] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:08:42.840] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:08:42.870] (Main Well                        :   0) Stop Pump
[2018-01-12 18:08:42.890] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:08:42.930] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:08:42.930] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:08:42.930] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:08:42.970] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:08:43.020] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:08:43.130] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:08:43.380] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:08:43.380] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:08:43.380] (Flush Capillary                  :  33) @Run
[2018-01-12 18:08:43.380] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:08:43.430] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:08:43.430] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:08:43.430] (Flush Singulator                 :  34) @Run
[2018-01-12 18:08:43.430] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:08:43.530] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:43.800] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:08:43.850] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:08:43.850] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:44.160] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:08:44.210] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:08:44.210] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:08:44.260] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:08:44.360] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:08:44.460] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:08:44.510] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:08:44.510] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:08:44.510] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:08:44.530] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:08:44.550] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:08:44.550] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:08:44.550] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:08:44.570] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:08:44.620] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:08:44.750] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:08:45.000] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:08:45.000] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:08:45.000] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:08:45.000] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:08:45.050] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:08:45.050] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:08:45.050] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:08:45.050] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:08:45.150] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:45.420] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:08:45.470] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:08:45.470] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:08:45.780] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:08:45.830] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:08:45.830] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:08:45.880] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:08:45.980] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:08:46.080] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:08:46.130] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:08:46.130] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:08:46.130] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:08:46.150] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:08:46.170] (Main Well                        :   0) Stop routine
[2018-01-12 18:08:46.170] (Main Well                        :   0) @Stop
[2018-01-12 18:08:46.250] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:08:46.250] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:08:46.250] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:08:46.250] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:08:46.340] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:08:46.340] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:08:48.250] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:08:48.250] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:08:48.250] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:08:48.250] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:08:48.360] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:08:48.360] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:08:34.480] (Detector                         :  17) @Stop
[2018-01-12 18:08:54.190] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:08:54.190] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:08:54.190] (MainPre Routine                  :   0) @Run
[2018-01-12 18:08:54.190] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:09:00.381] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:09:00.381] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:09:00.381] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:09:01.021] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:09:01.021] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:09:01.031] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:09:02.761] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:09:02.761] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:09:02.761] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:09:02.921] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:09:02.971] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:09:02.991] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:09:03.241] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:09:03.241] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:09:03.241] (Initialize P1                    :   3) @Run
[2018-01-12 18:09:03.241] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:09:03.291] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:09:03.291] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:09:03.291] (Initialize P2                    :   4) @Run
[2018-01-12 18:09:03.291] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:09:03.471] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:03.701] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:03.821] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:09:03.871] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:03.871] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:03.921] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:09:03.971] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:03.971] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:04.161] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:09:04.211] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:04.211] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:04.261] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:09:04.311] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:04.311] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:04.361] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:09:04.411] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:04.411] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:04.461] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:09:04.511] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:04.511] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:04.561] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:09:04.611] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:04.611] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:04.661] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:09:04.711] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:04.711] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:04.781] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:09:04.831] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:04.831] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:05.021] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:09:05.071] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:05.071] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:05.121] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:09:05.171] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:05.171] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:05.221] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:09:05.271] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:05.271] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:05.321] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:09:05.371] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:05.371] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:05.421] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:09:05.471] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:05.471] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:05.521] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:09:05.571] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:05.571] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:05.641] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:09:05.691] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:05.691] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:05.881] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:09:05.931] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:05.931] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:05.981] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:09:06.031] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:09:06.031] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:06.081] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:09:06.131] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:09:06.131] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:09:06.131] (Initialize P1                    :   3) @Stop
[2018-01-12 18:09:06.181] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:09:06.231] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:09:06.231] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:09:06.231] (Initialize P2                    :   4) @Stop
[2018-01-12 18:09:06.491] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:09:06.691] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:09:06.711] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:09:06.711] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:09:06.711] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:09:06.711] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:09:06.711] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:06.711] (PreFillP1                        :   6) @Run
[2018-01-12 18:09:06.711] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:09:06.761] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:09:06.761] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:09:06.761] (PreFillP2                        :   7) @Run
[2018-01-12 18:09:06.761] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:09:06.861] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:07.131] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:07.181] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:07.181] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:07.491] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:07.541] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:07.541] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:07.791] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:07.841] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:07.841] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:07.991] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:08.041] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:08.041] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:08.211] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:08.261] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:08.261] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:08.551] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:08.601] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:08.601] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:08.851] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:08.901] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:09:08.901] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:08.951] (PreFillP1                        :   6) @Stop
[2018-01-12 18:09:09.051] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:09.101] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:09:09.101] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:09.271] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:09.321] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:09:09.321] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:09.511] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:09.561] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:09:09.561] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:09.711] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:09.761] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:09:09.761] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:09.861] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:09.911] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:09:09.911] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:10.081] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:10.131] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:09:10.131] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:10.321] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:10.371] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:09:10.371] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:09:10.371] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:09:10.411] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:09:10.421] (PreFillP2                        :   7) @Stop
[2018-01-12 18:09:10.461] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:09:10.461] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:09:10.461] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:09:10.481] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:10.531] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:09:10.551] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:09:10.801] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:09:10.801] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:10.801] (Flush Capillary                  :   9) @Run
[2018-01-12 18:09:10.801] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:09:10.851] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:09:10.851] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:09:10.851] (Flush Singulator                 :  10) @Run
[2018-01-12 18:09:10.851] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:09:10.951] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:11.201] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:11.251] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:11.251] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:11.401] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:11.451] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:11.451] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:11.621] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:11.671] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:11.671] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:11.961] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:12.011] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:12.011] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:12.261] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:12.311] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:12.311] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:12.461] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:12.511] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:12.511] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:12.681] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:12.731] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:12.731] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:13.021] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:13.071] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:09:13.071] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:13.121] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:09:13.221] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:09:13.321] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:13.371] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:09:13.371] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:09:13.371] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:09:13.411] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:09:13.431] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:09:13.431] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:09:13.431] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:09:13.471] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:13.521] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:09:13.631] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:09:13.881] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:09:13.881] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:13.881] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:09:13.881] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:09:13.931] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:09:13.931] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:09:13.931] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:09:13.931] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:09:14.031] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:14.301] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:14.351] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:14.351] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:14.661] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:14.711] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:14.711] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:14.961] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:15.011] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:15.011] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:15.161] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:15.211] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:15.211] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:15.381] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:15.431] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:15.431] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:15.481] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:09:15.721] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:15.771] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:09:15.771] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:15.821] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:09:15.921] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:15.971] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:09:15.971] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:09:15.971] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:09:15.981] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:09:15.981] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:09:15.981] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:09:15.981] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:09:15.981] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:09:15.981] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:09:15.981] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:15.981] (PreFillP1                        :   6) @Run
[2018-01-12 18:09:15.981] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:09:16.031] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:09:16.031] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:09:16.031] (PreFillP2                        :   7) @Run
[2018-01-12 18:09:16.031] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:09:16.131] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:16.421] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:16.471] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:16.471] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:16.761] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:16.811] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:16.811] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:16.971] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:17.021] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:17.021] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:17.181] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:17.231] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:17.231] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:17.401] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:17.451] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:17.451] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:17.741] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:17.791] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:17.791] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:18.041] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:18.091] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:18.091] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:18.241] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:18.291] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:09:18.291] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:18.341] (PreFillP1                        :   6) @Stop
[2018-01-12 18:09:18.461] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:18.511] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:09:18.511] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:18.801] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:18.851] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:09:18.851] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:19.001] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:19.051] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:09:19.051] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:19.151] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:19.201] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:09:19.201] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:19.351] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:19.401] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:09:19.401] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:19.611] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:09:19.661] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:09:19.661] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:09:19.661] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:09:19.681] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:09:19.711] (PreFillP2                        :   7) @Stop
[2018-01-12 18:09:19.751] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:09:19.751] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:09:19.751] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:09:19.771] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:19.821] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:09:19.841] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:09:20.091] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:09:20.091] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:20.091] (Flush Capillary                  :   9) @Run
[2018-01-12 18:09:20.091] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:09:20.141] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:09:20.141] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:09:20.141] (Flush Singulator                 :  10) @Run
[2018-01-12 18:09:20.141] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:09:20.241] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:20.491] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:20.541] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:20.541] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:20.691] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:20.741] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:20.741] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:20.911] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:20.961] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:20.961] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:21.251] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:21.301] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:21.301] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:21.551] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:21.601] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:21.601] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:21.751] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:21.801] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:21.801] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:21.971] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:22.021] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:22.021] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:22.311] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:22.361] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:09:22.361] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:22.411] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:09:22.511] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:09:22.611] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:09:22.661] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:09:22.661] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:09:22.661] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:09:22.701] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:09:22.721] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:09:22.721] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:09:22.721] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:09:22.761] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:22.811] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:09:22.921] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:09:23.171] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:09:23.171] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:23.171] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:09:23.171] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:09:23.221] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:09:23.221] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:09:23.221] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:09:23.221] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:09:23.321] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:23.591] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:23.641] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:23.641] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:23.951] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:24.001] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:24.001] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:24.251] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:24.301] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:24.301] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:24.451] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:24.501] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:24.501] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:24.671] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:24.721] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:09:24.721] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:24.771] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:09:25.011] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:25.061] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:09:25.061] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:25.111] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:09:25.211] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:09:25.261] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:09:25.261] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:09:25.261] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:09:25.271] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:09:25.271] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:09:25.271] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:09:25.271] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:09:25.271] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:09:25.271] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:09:25.271] (Prefill before Flush             :  14) @Run
[2018-01-12 18:09:25.271] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:09:25.271] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:09:25.271] (PreFillP1                        :  15) @Run
[2018-01-12 18:09:25.271] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:09:25.321] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:09:25.321] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:09:25.321] (PreFillP2                        :  16) @Run
[2018-01-12 18:09:25.321] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:09:25.421] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:25.711] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:09:25.761] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:25.761] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:25.951] (PreFillP1                        :  15) @Stop
[2018-01-12 18:09:26.051] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:09:26.101] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:09:26.101] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:26.151] (PreFillP2                        :  16) @Stop
[2018-01-12 18:09:26.251] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:09:26.301] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:09:26.301] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:09:26.301] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:09:26.321] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:09:26.341] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:09:26.341] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:08:34.480] (Detector                         :   2) @Stop
[2018-01-12 18:09:26.771] ** STARTING A02 MAIN ROUTINE **
[2018-01-12 18:09:26.771] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:09:26.771] (Main Well                        :   0) @Run
[2018-01-12 18:09:26.771] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:09:26.771] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:09:26.771] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:09:26.771] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:09:26.771] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:09:26.771] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:09:26.771] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:09:26.771] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:09:26.771] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:09:26.771] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:09:27.271] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:09:27.271] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:09:27.321] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:09:27.431] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:09:27.431] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:09:27.431] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:09:27.431] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:09:27.431] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:09:27.431] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:09:27.431] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:09:27.431] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:09:27.431] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:09:27.431] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:09:27.451] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:09:27.501] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:09:27.521] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:09:27.771] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:09:27.771] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:09:27.771] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:09:27.771] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:09:27.821] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:09:27.821] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:09:27.821] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:09:27.821] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:09:27.921] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:28.191] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:09:28.241] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:09:28.241] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:28.551] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:09:28.601] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:09:28.601] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:28.851] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:09:28.901] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:09:28.901] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:29.051] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:09:29.101] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:09:29.101] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:29.151] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:09:29.271] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:09:29.321] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:09:29.321] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:29.371] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:09:29.611] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:09:29.661] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:09:29.661] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:09:29.661] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:09:29.661] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:09:29.661] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:09:29.721] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:09:29.771] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:09:29.831] (Main Well                        :   0) Move to Well 2 with z-offset of 2540 um (Wait)
[2018-01-12 18:09:32.371] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:32.611] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:09:32.661] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:09:32.661] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:32.761] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:09:32.811] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:09:32.811] (Main Well                        :   0) Stop Pump
[2018-01-12 18:09:32.851] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:09:32.911] (Main Well                        :   0) Move to Well 2 with z-offset of 310 um (Wait)
[2018-01-12 18:09:42.191] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:42.431] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:09:42.481] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:09:42.481] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:09:42.481] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:09:42.481] (Pickup Sample                    :  21) @Run
[2018-01-12 18:09:42.481] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:09:47.151] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:09:49.231] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:09:49.311] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:09:49.511] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:49.611] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:49.661] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:49.661] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:49.761] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:49.811] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:49.811] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:49.911] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:49.961] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:49.961] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:50.071] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:50.121] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:50.121] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:50.311] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:50.361] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:50.361] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:50.461] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:50.511] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:50.511] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:50.611] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:50.661] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:50.661] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:50.761] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:50.811] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:50.811] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:51.021] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:51.071] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:51.071] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:51.171] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:51.221] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:51.221] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:51.321] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:51.371] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:51.371] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:51.471] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:51.521] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:51.521] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:51.731] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:51.781] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:51.781] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:51.881] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:51.931] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:51.931] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:52.031] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:52.081] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:52.081] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:52.181] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:52.231] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:52.231] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:52.441] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:52.491] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:52.491] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:52.591] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:52.641] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:52.641] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:52.741] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:52.791] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:52.791] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:52.891] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:52.941] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:52.941] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:53.151] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:53.201] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:53.201] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:53.301] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:53.351] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:53.351] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:53.451] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:53.501] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:53.501] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:53.601] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:53.651] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:53.651] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:53.861] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:53.911] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:53.911] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:54.011] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:54.061] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:54.061] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:54.161] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:54.211] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:54.211] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:54.311] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:54.361] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:54.361] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:54.571] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:54.621] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:54.621] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:54.721] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:54.771] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:54.771] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:54.871] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:54.921] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:54.921] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:55.021] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:55.071] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:55.071] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:55.281] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:55.331] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:55.331] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:55.431] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:55.481] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:55.481] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:55.581] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:55.631] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:55.631] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:55.731] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:55.781] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:55.781] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:55.991] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:56.041] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:56.041] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:56.141] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:56.191] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:56.191] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:56.291] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:56.341] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:56.341] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:56.441] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:56.491] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:56.491] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:56.701] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:56.751] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:56.751] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:56.851] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:56.901] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:56.901] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:57.001] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:57.051] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:57.051] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:57.151] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:57.201] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:57.201] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:57.411] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:57.461] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:57.461] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:57.561] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:57.611] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:57.611] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:57.711] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:57.761] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:57.761] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:57.861] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:57.911] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:57.911] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:58.121] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:58.171] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:58.171] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:58.271] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:58.321] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:58.321] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:58.421] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:58.471] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:58.471] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:58.571] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:58.621] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:09:58.621] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:09:58.831] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:58.881] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:09:58.881] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:09:58.981] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:09:59.031] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:09:59.031] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:09:59.031] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:09:59.281] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:09:59.411] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:09:59.661] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:09:59.681] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:09:59.731] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:09:59.731] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:09:59.731] (Singulate Sample                 :  22) @Run
[2018-01-12 18:09:59.731] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:09:59.731] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:09:59.731] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:09:59.791] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:09:59.841] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:09:59.901] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:10:00.001] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_A02_RAW.qlb"
[2018-01-12 18:10:00.113] (Detector                         :   2) @Run
[2018-01-12 18:10:00.113] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:10:40.013] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:10:40.843] (Detector                         :   2) @Stop
[2018-01-12 18:10:41.013] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:10:41.013] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:10:41.123] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:10:41.173] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:10:41.173] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:41.273] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:10:41.323] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:10:41.323] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:10:41.323] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:10:41.533] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:10:41.533] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:10:41.533] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:10:41.533] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:10:41.533] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:10:41.533] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:10:41.533] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:41.533] (PreFillP1                        :  24) @Run
[2018-01-12 18:10:41.533] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:10:41.583] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:10:41.583] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:10:41.583] (PreFillP2                        :  25) @Run
[2018-01-12 18:10:41.583] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:10:41.683] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:42.003] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:42.053] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:10:42.053] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:42.203] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:42.253] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:10:42.253] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:42.423] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:42.473] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:10:42.473] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:42.763] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:42.813] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:10:42.813] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:43.063] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:43.113] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:10:43.113] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:43.263] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:43.313] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:10:43.313] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:43.483] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:43.533] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:10:43.533] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:43.823] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:43.873] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:10:43.873] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:44.123] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:44.173] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:10:44.173] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:44.323] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:44.373] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:10:44.373] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:44.543] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:44.593] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:10:44.593] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:10:44.883] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:44.933] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:10:44.933] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:10:44.993] (PreFillP1                        :  24) @Stop
[2018-01-12 18:10:45.193] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:45.243] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:10:45.243] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:10:45.343] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:45.393] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:10:45.393] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:10:45.463] (PreFillP2                        :  25) @Stop
[2018-01-12 18:10:45.703] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:10:45.753] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:10:45.753] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:10:45.753] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:10:45.783] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:10:45.783] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:10:45.783] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:10:45.803] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:10:45.853] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:10:45.873] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:10:46.123] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:10:46.123] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:10:46.123] (Flush Capillary                  :  27) @Run
[2018-01-12 18:10:46.123] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:10:46.173] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:10:46.173] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:10:46.173] (Flush Singulator                 :  28) @Run
[2018-01-12 18:10:46.173] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:10:46.273] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:46.583] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:10:46.633] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:10:46.633] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:46.783] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:10:46.833] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:10:46.833] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:47.003] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:10:47.053] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:10:47.053] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:47.343] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:10:47.393] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:10:47.393] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:47.443] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:10:47.643] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:10:47.693] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:10:47.693] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:10:47.793] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:10:47.843] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:10:47.843] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:10:47.843] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:10:47.883] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:10:47.893] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:10:47.933] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:10:47.933] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:10:47.933] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:10:48.093] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:10:48.143] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:10:48.163] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:10:48.413] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:10:48.413] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:10:48.413] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:10:48.413] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:10:48.463] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:10:48.463] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:10:48.463] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:10:48.463] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:10:48.563] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:48.833] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:10:48.883] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:10:48.883] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:49.193] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:10:49.243] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:10:49.243] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:10:49.293] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:10:49.393] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:10:49.493] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:10:49.543] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:10:49.543] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:10:49.543] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:10:49.583] (Main Well                        :   0) Stop Pump
[2018-01-12 18:10:49.623] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:10:49.623] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:10:49.623] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:10:49.663] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:10:49.713] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:10:49.823] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:10:50.073] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:10:50.073] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:10:50.073] (Flush Capillary                  :  33) @Run
[2018-01-12 18:10:50.073] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:10:50.123] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:10:50.123] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:10:50.123] (Flush Singulator                 :  34) @Run
[2018-01-12 18:10:50.123] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:10:50.223] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:50.493] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:10:50.543] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:10:50.543] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:50.853] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:10:50.903] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:10:50.903] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:10:50.953] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:10:51.053] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:10:51.153] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:10:51.203] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:10:51.203] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:10:51.203] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:10:51.223] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:10:51.243] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:10:51.243] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:10:51.243] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:10:51.263] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:10:51.313] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:10:51.443] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:10:51.693] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:10:51.693] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:10:51.693] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:10:51.693] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:10:51.743] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:10:51.743] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:10:51.743] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:10:51.743] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:10:51.843] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:52.113] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:10:52.163] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:10:52.163] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:10:52.473] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:10:52.523] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:10:52.523] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:10:52.573] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:10:52.673] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:10:52.773] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:10:52.823] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:10:52.823] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:10:52.823] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:10:52.843] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:10:52.863] (Main Well                        :   0) Stop routine
[2018-01-12 18:10:52.863] (Main Well                        :   0) @Stop
[2018-01-12 18:10:53.323] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:10:53.323] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:10:53.333] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:10:53.333] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:10:53.333] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:10:53.333] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:10:55.323] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:10:55.323] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:10:55.323] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:10:55.323] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:10:55.363] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:10:55.363] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:10:40.843] (Detector                         :  17) @Stop
[2018-01-12 18:10:59.543] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:10:59.543] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:10:59.543] (MainPre Routine                  :   0) @Run
[2018-01-12 18:10:59.543] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:11:05.595] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:11:05.595] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:11:05.595] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:11:06.235] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:11:06.235] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:11:06.245] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:11:07.975] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:11:07.975] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:11:07.975] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:11:08.135] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:11:08.185] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:11:08.205] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:11:08.455] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:11:08.455] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:11:08.455] (Initialize P1                    :   3) @Run
[2018-01-12 18:11:08.455] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:11:08.505] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:11:08.505] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:11:08.505] (Initialize P2                    :   4) @Run
[2018-01-12 18:11:08.505] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:11:08.685] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:08.915] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:09.035] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:11:09.085] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:09.085] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:09.135] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:11:09.185] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:09.185] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:09.375] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:11:09.425] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:09.425] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:09.475] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:11:09.525] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:09.525] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:09.575] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:11:09.625] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:09.625] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:09.675] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:11:09.725] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:09.725] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:09.775] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:11:09.825] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:09.825] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:09.875] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:11:09.925] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:09.925] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:09.995] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:11:10.045] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:10.045] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:10.235] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:11:10.285] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:10.285] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:10.335] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:11:10.385] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:10.385] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:10.435] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:11:10.485] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:10.485] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:10.535] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:11:10.585] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:10.585] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:10.635] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:11:10.685] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:10.685] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:10.735] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:11:10.785] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:10.785] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:10.855] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:11:10.905] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:10.905] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:11.095] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:11:11.145] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:11.145] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:11.195] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:11:11.245] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:11:11.245] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:11.295] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:11:11.345] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:11:11.345] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:11:11.345] (Initialize P1                    :   3) @Stop
[2018-01-12 18:11:11.395] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:11:11.445] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:11:11.445] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:11:11.445] (Initialize P2                    :   4) @Stop
[2018-01-12 18:11:11.705] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:11:11.905] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:11:11.925] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:11:11.925] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:11:11.925] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:11:11.925] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:11:11.925] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:11.925] (PreFillP1                        :   6) @Run
[2018-01-12 18:11:11.925] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:11:11.975] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:11:11.975] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:11:11.975] (PreFillP2                        :   7) @Run
[2018-01-12 18:11:11.975] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:11:12.075] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:12.345] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:12.395] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:12.395] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:12.705] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:12.755] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:12.755] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:13.005] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:13.055] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:13.055] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:13.205] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:13.255] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:13.255] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:13.425] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:13.475] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:13.475] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:13.765] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:13.815] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:13.815] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:14.065] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:14.115] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:11:14.115] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:14.165] (PreFillP1                        :   6) @Stop
[2018-01-12 18:11:14.265] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:14.315] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:11:14.315] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:14.485] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:14.535] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:11:14.535] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:14.725] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:14.775] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:11:14.775] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:14.925] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:14.975] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:11:14.975] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:15.075] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:15.125] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:11:15.125] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:15.305] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:15.355] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:11:15.355] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:15.545] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:15.595] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:11:15.595] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:11:15.595] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:11:15.625] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:11:15.645] (PreFillP2                        :   7) @Stop
[2018-01-12 18:11:15.685] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:11:15.685] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:11:15.685] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:11:15.705] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:15.755] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:11:15.775] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:11:16.025] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:11:16.025] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:16.025] (Flush Capillary                  :   9) @Run
[2018-01-12 18:11:16.025] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:11:16.075] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:11:16.075] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:11:16.075] (Flush Singulator                 :  10) @Run
[2018-01-12 18:11:16.075] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:11:16.175] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:16.425] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:16.475] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:16.475] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:16.625] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:16.675] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:16.675] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:16.845] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:16.895] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:16.895] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:17.185] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:17.235] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:17.235] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:17.485] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:17.535] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:17.535] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:17.685] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:17.735] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:17.735] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:17.905] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:17.955] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:17.955] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:18.245] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:18.295] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:11:18.295] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:18.345] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:11:18.445] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:11:18.545] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:18.595] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:11:18.595] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:11:18.595] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:11:18.635] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:11:18.655] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:11:18.655] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:11:18.655] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:11:18.695] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:18.745] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:11:18.855] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:11:19.105] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:11:19.105] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:19.105] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:11:19.105] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:11:19.155] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:11:19.155] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:11:19.155] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:11:19.155] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:11:19.255] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:19.525] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:19.575] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:19.575] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:19.885] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:19.935] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:19.935] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:20.185] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:20.235] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:20.235] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:20.385] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:20.435] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:20.435] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:20.605] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:20.655] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:20.655] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:20.705] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:11:20.945] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:20.995] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:11:20.995] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:21.045] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:11:21.145] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:21.195] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:11:21.195] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:11:21.195] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:11:21.205] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:11:21.205] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:11:21.205] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:11:21.205] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:11:21.205] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:11:21.205] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:11:21.205] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:21.205] (PreFillP1                        :   6) @Run
[2018-01-12 18:11:21.205] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:11:21.255] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:11:21.255] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:11:21.255] (PreFillP2                        :   7) @Run
[2018-01-12 18:11:21.255] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:11:21.355] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:21.645] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:21.695] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:21.695] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:21.985] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:22.035] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:22.035] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:22.185] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:22.235] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:22.235] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:22.385] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:22.435] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:22.435] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:22.605] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:22.655] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:22.655] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:22.945] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:22.995] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:22.995] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:23.245] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:23.295] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:23.295] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:23.445] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:23.495] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:11:23.495] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:23.545] (PreFillP1                        :   6) @Stop
[2018-01-12 18:11:23.665] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:23.715] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:11:23.715] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:24.005] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:24.055] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:11:24.055] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:24.205] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:24.255] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:11:24.255] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:24.355] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:24.405] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:11:24.405] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:24.555] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:24.605] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:11:24.605] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:24.815] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:11:24.865] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:11:24.865] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:11:24.865] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:11:24.905] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:11:24.915] (PreFillP2                        :   7) @Stop
[2018-01-12 18:11:24.955] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:11:24.955] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:11:24.955] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:11:24.975] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:25.025] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:11:25.045] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:11:25.295] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:11:25.295] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:25.295] (Flush Capillary                  :   9) @Run
[2018-01-12 18:11:25.295] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:11:25.345] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:11:25.345] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:11:25.345] (Flush Singulator                 :  10) @Run
[2018-01-12 18:11:25.345] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:11:25.445] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:25.695] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:25.745] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:25.745] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:25.895] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:25.945] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:25.945] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:26.125] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:26.175] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:26.175] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:26.465] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:26.515] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:26.515] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:26.765] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:26.815] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:26.815] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:26.965] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:27.015] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:27.015] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:27.185] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:27.235] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:27.235] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:27.525] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:27.575] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:11:27.575] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:27.625] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:11:27.725] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:11:27.825] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:11:27.875] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:11:27.875] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:11:27.875] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:11:27.915] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:11:27.935] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:11:27.935] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:11:27.935] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:11:27.975] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:28.025] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:11:28.135] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:11:28.385] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:11:28.385] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:28.385] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:11:28.385] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:11:28.435] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:11:28.435] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:11:28.435] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:11:28.435] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:11:28.535] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:28.805] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:28.855] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:28.855] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:29.165] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:29.215] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:29.215] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:29.465] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:29.515] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:29.515] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:29.665] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:29.715] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:29.715] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:29.885] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:29.935] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:11:29.935] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:29.985] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:11:30.225] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:30.275] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:11:30.275] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:30.325] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:11:30.425] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:11:30.475] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:11:30.475] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:11:30.475] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:11:30.485] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:11:30.485] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:11:30.485] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:11:30.485] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:11:30.485] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:11:30.485] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:11:30.485] (Prefill before Flush             :  14) @Run
[2018-01-12 18:11:30.485] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:11:30.485] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:11:30.485] (PreFillP1                        :  15) @Run
[2018-01-12 18:11:30.485] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:11:30.535] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:11:30.535] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:11:30.535] (PreFillP2                        :  16) @Run
[2018-01-12 18:11:30.535] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:11:30.635] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:30.925] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:11:30.975] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:30.975] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:31.165] (PreFillP1                        :  15) @Stop
[2018-01-12 18:11:31.265] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:11:31.315] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:11:31.315] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:31.365] (PreFillP2                        :  16) @Stop
[2018-01-12 18:11:31.465] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:11:31.515] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:11:31.515] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:11:31.515] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:11:31.535] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:11:31.555] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:11:31.555] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:10:40.843] (Detector                         :   2) @Stop
[2018-01-12 18:11:32.115] ** STARTING B02 MAIN ROUTINE **
[2018-01-12 18:11:32.115] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:11:32.115] (Main Well                        :   0) @Run
[2018-01-12 18:11:32.115] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:11:32.125] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:11:32.125] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:11:32.125] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:11:32.125] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:11:32.125] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:11:32.125] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:11:32.125] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:11:32.135] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:11:32.135] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:11:32.635] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:11:32.635] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:11:32.675] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:11:32.795] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:11:32.795] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:11:32.795] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:11:32.795] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:11:32.795] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:11:32.795] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:11:32.795] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:11:32.795] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:11:32.795] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:11:32.795] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:11:32.815] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:11:32.865] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:11:32.885] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:11:33.135] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:11:33.135] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:11:33.135] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:11:33.135] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:11:33.185] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:11:33.185] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:11:33.185] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:11:33.185] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:11:33.285] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:33.555] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:11:33.605] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:11:33.605] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:33.915] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:11:33.965] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:11:33.965] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:34.215] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:11:34.265] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:11:34.265] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:34.415] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:11:34.465] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:11:34.465] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:34.535] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:11:34.775] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:11:34.825] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:11:34.825] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:34.875] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:11:34.975] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:11:35.025] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:11:35.025] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:11:35.025] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:11:35.025] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:11:35.025] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:11:35.085] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:11:35.135] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:11:35.195] (Main Well                        :   0) Move to Well 14 with z-offset of 2540 um (Wait)
[2018-01-12 18:11:37.495] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:11:37.595] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:11:37.645] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:11:37.645] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:37.855] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:11:37.905] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:11:37.905] (Main Well                        :   0) Stop Pump
[2018-01-12 18:11:37.945] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:11:38.005] (Main Well                        :   0) Move to Well 14 with z-offset of 310 um (Wait)
[2018-01-12 18:11:46.465] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:46.705] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:11:46.755] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:11:46.755] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:11:46.755] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:11:46.755] (Pickup Sample                    :  21) @Run
[2018-01-12 18:11:46.755] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:11:51.425] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:11:53.505] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:11:53.585] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:11:53.785] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:53.885] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:53.935] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:53.935] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:54.035] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:54.085] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:54.085] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:54.185] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:54.235] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:54.235] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:54.345] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:54.395] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:54.395] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:54.585] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:54.635] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:54.635] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:54.735] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:54.785] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:54.785] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:54.885] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:54.935] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:54.935] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:55.035] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:55.085] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:55.085] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:55.295] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:55.345] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:55.345] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:55.445] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:55.495] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:55.495] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:55.595] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:55.645] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:55.645] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:55.745] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:55.795] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:55.795] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:56.005] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:56.055] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:56.055] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:56.155] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:56.205] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:56.205] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:56.305] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:56.355] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:56.355] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:56.455] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:56.505] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:56.505] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:56.715] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:56.765] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:56.765] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:56.865] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:56.915] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:56.915] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:57.015] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:57.065] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:57.065] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:57.165] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:57.215] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:57.215] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:57.425] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:57.475] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:57.475] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:57.575] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:57.625] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:57.625] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:57.725] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:57.775] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:57.775] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:57.875] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:57.925] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:57.925] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:58.135] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:58.185] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:58.185] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:58.285] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:58.335] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:58.335] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:58.435] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:58.485] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:58.485] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:58.585] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:58.635] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:58.635] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:58.845] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:58.895] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:58.895] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:58.995] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:59.045] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:59.045] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:59.145] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:59.195] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:59.195] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:59.295] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:59.345] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:59.345] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:59.555] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:59.605] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:59.605] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:59.705] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:59.755] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:59.755] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:11:59.855] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:11:59.905] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:11:59.905] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:00.005] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:00.055] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:00.055] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:00.265] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:00.315] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:00.315] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:00.415] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:00.465] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:00.465] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:00.567] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:00.617] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:00.617] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:00.717] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:00.767] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:00.767] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:00.977] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:01.027] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:01.027] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:01.127] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:01.177] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:01.177] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:01.297] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:01.347] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:01.347] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:01.447] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:01.497] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:01.497] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:01.707] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:01.757] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:01.757] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:01.857] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:01.907] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:01.907] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:02.007] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:02.057] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:02.057] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:02.157] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:02.207] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:02.207] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:02.417] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:02.467] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:02.467] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:02.567] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:02.617] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:02.617] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:02.717] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:02.767] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:02.767] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:02.867] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:02.917] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:02.917] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:03.127] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:03.177] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:12:03.177] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:03.277] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:12:03.327] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:12:03.327] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:12:03.327] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:12:03.557] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:12:03.707] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:12:03.957] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:12:03.977] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:12:04.027] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:12:04.027] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:12:04.027] (Singulate Sample                 :  22) @Run
[2018-01-12 18:12:04.027] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:12:04.027] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:12:04.027] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:12:04.087] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:12:04.137] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:12:04.197] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:12:04.297] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_B02_RAW.qlb"
[2018-01-12 18:12:04.397] (Detector                         :   2) @Run
[2018-01-12 18:12:04.397] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:12:44.297] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:12:45.167] (Detector                         :   2) @Stop
[2018-01-12 18:12:45.297] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:12:45.297] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:45.427] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:12:45.477] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:12:45.477] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:45.577] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:12:45.627] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:12:45.627] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:12:45.627] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:12:46.027] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:12:46.027] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:12:46.027] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:12:46.027] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:12:46.027] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:12:46.027] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:12:46.027] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:46.027] (PreFillP1                        :  24) @Run
[2018-01-12 18:12:46.027] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:12:46.077] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:12:46.077] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:12:46.077] (PreFillP2                        :  25) @Run
[2018-01-12 18:12:46.077] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:12:46.177] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:46.447] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:46.497] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:46.497] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:46.667] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:46.717] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:46.717] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:47.007] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:47.057] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:47.057] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:47.307] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:47.357] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:47.357] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:47.507] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:47.557] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:47.557] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:47.727] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:47.777] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:47.777] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:48.067] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:48.117] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:48.117] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:48.367] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:48.417] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:48.417] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:48.567] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:48.617] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:48.617] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:48.787] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:48.837] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:12:48.837] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:49.127] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:49.177] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:12:49.177] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:49.227] (PreFillP1                        :  24) @Stop
[2018-01-12 18:12:49.427] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:49.477] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:12:49.477] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:49.577] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:49.627] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:12:49.627] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:49.797] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:12:49.847] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:12:49.847] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:12:49.847] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:12:49.877] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:12:49.877] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:12:49.877] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:12:50.037] (PreFillP2                        :  25) @Stop
[2018-01-12 18:12:50.057] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:12:50.107] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:12:50.127] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:12:50.377] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:12:50.377] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:12:50.377] (Flush Capillary                  :  27) @Run
[2018-01-12 18:12:50.377] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:12:50.427] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:12:50.427] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:12:50.427] (Flush Singulator                 :  28) @Run
[2018-01-12 18:12:50.427] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:12:50.527] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:50.957] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:12:51.007] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:12:51.007] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:51.257] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:12:51.307] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:12:51.307] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:51.457] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:12:51.507] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:12:51.507] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:51.677] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:12:51.727] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:12:51.727] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:51.777] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:12:52.017] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:12:52.067] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:12:52.067] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:52.117] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:12:52.217] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:12:52.267] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:12:52.267] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:12:52.267] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:12:52.277] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:12:52.297] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:12:52.297] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:12:52.297] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:12:52.317] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:12:52.367] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:12:52.387] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:12:52.637] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:12:52.637] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:12:52.637] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:12:52.637] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:12:52.687] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:12:52.687] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:12:52.687] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:12:52.687] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:12:52.787] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:53.057] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:12:53.107] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:12:53.107] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:53.277] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:12:53.327] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:12:53.327] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:53.617] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:12:53.667] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:12:53.667] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:53.717] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:12:53.817] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:12:53.917] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:12:53.967] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:12:53.967] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:12:53.967] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:12:53.997] (Main Well                        :   0) Stop Pump
[2018-01-12 18:12:54.037] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:12:54.037] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:12:54.037] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:12:54.077] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:12:54.127] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:12:54.237] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:12:54.487] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:12:54.487] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:12:54.487] (Flush Capillary                  :  33) @Run
[2018-01-12 18:12:54.487] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:12:54.537] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:12:54.537] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:12:54.537] (Flush Singulator                 :  34) @Run
[2018-01-12 18:12:54.537] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:12:54.637] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:54.907] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:12:54.957] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:12:54.957] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:55.267] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:12:55.317] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:12:55.317] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:55.367] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:12:55.467] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:12:55.567] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:12:55.617] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:12:55.617] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:12:55.617] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:12:55.637] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:12:55.657] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:12:55.657] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:12:55.657] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:12:55.677] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:12:55.727] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:12:55.857] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:12:56.107] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:12:56.107] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:12:56.107] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:12:56.107] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:12:56.157] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:12:56.157] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:12:56.157] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:12:56.157] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:12:56.257] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:56.527] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:12:56.577] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:12:56.577] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:12:56.887] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:12:56.937] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:12:56.937] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:12:56.987] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:12:57.087] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:12:57.187] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:12:57.237] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:12:57.237] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:12:57.237] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:12:57.257] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:12:57.277] (Main Well                        :   0) Stop routine
[2018-01-12 18:12:57.277] (Main Well                        :   0) @Stop
[2018-01-12 18:12:57.657] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:12:57.657] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:12:57.657] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:12:57.657] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:12:57.687] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:12:57.687] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:12:59.657] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:12:59.657] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:12:59.657] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:12:59.657] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:12:59.697] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:12:59.697] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:12:45.167] (Detector                         :  17) @Stop
[2018-01-12 18:13:06.407] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:13:06.407] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:13:06.407] (MainPre Routine                  :   0) @Run
[2018-01-12 18:13:06.407] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:13:12.287] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:13:12.287] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:13:12.287] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:13:12.927] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:13:12.927] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:13:12.937] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:13:14.667] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:13:14.667] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:13:14.667] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:13:14.827] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:13:14.877] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:13:14.897] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:13:15.147] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:13:15.147] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:13:15.147] (Initialize P1                    :   3) @Run
[2018-01-12 18:13:15.147] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:13:15.197] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:13:15.197] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:13:15.197] (Initialize P2                    :   4) @Run
[2018-01-12 18:13:15.197] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:13:15.377] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:15.607] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:15.727] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:13:15.777] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:15.777] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:15.827] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:13:15.877] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:15.877] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:16.067] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:13:16.117] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:16.117] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:16.167] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:13:16.217] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:16.217] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:16.267] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:13:16.317] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:16.317] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:16.367] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:13:16.417] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:16.417] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:16.467] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:13:16.517] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:16.517] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:16.567] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:13:16.617] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:16.617] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:16.687] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:13:16.737] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:16.737] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:16.927] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:13:16.977] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:16.977] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:17.027] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:13:17.077] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:17.077] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:17.127] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:13:17.177] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:17.177] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:17.227] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:13:17.277] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:17.277] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:17.327] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:13:17.377] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:17.377] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:17.427] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:13:17.477] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:17.477] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:17.547] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:13:17.597] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:17.597] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:17.787] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:13:17.837] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:17.837] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:17.887] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:13:17.937] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:13:17.937] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:17.987] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:13:18.037] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:13:18.037] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:13:18.037] (Initialize P1                    :   3) @Stop
[2018-01-12 18:13:18.087] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:13:18.137] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:13:18.137] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:13:18.137] (Initialize P2                    :   4) @Stop
[2018-01-12 18:13:18.397] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:13:18.597] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:13:18.617] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:13:18.617] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:13:18.617] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:13:18.617] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:13:18.617] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:18.617] (PreFillP1                        :   6) @Run
[2018-01-12 18:13:18.617] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:13:18.667] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:13:18.667] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:13:18.667] (PreFillP2                        :   7) @Run
[2018-01-12 18:13:18.667] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:13:18.767] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:19.037] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:19.087] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:19.087] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:19.397] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:19.447] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:19.447] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:19.697] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:19.747] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:19.747] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:19.897] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:19.947] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:19.947] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:20.117] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:20.167] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:20.167] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:20.457] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:20.507] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:20.507] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:20.757] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:20.807] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:13:20.807] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:20.857] (PreFillP1                        :   6) @Stop
[2018-01-12 18:13:20.957] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:21.007] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:13:21.007] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:21.177] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:21.227] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:13:21.227] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:21.417] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:21.467] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:13:21.467] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:21.617] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:21.667] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:13:21.667] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:21.767] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:21.817] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:13:21.817] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:21.967] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:22.017] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:13:22.017] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:22.227] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:22.277] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:13:22.277] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:13:22.277] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:13:22.317] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:13:22.327] (PreFillP2                        :   7) @Stop
[2018-01-12 18:13:22.367] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:13:22.367] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:13:22.367] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:13:22.387] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:22.437] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:13:22.457] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:13:22.707] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:13:22.707] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:22.707] (Flush Capillary                  :   9) @Run
[2018-01-12 18:13:22.707] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:13:22.757] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:13:22.757] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:13:22.757] (Flush Singulator                 :  10) @Run
[2018-01-12 18:13:22.757] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:13:22.857] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:23.107] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:23.157] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:23.157] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:23.307] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:23.357] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:23.357] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:23.527] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:23.577] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:23.577] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:23.867] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:23.917] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:23.917] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:24.177] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:24.227] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:24.227] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:24.377] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:24.427] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:24.427] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:24.737] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:24.787] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:24.787] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:24.837] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:13:24.937] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:13:25.037] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:25.087] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:13:25.087] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:25.187] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:25.237] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:13:25.237] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:13:25.237] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:13:25.267] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:13:25.367] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:13:25.367] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:13:25.367] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:13:25.387] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:25.437] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:13:25.457] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:13:25.707] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:13:25.707] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:25.707] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:13:25.707] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:13:25.757] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:13:25.757] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:13:25.757] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:13:25.757] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:13:25.857] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:26.147] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:26.197] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:26.197] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:26.487] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:26.537] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:26.537] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:26.687] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:26.737] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:26.737] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:26.887] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:26.937] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:26.937] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:27.107] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:27.157] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:27.157] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:27.207] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:13:27.447] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:27.497] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:13:27.497] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:27.547] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:13:27.647] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:27.697] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:13:27.697] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:13:27.697] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:13:27.717] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:13:27.717] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:13:27.717] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:13:27.717] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:13:27.717] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:13:27.717] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:13:27.717] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:27.717] (PreFillP1                        :   6) @Run
[2018-01-12 18:13:27.717] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:13:27.767] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:13:27.767] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:13:27.767] (PreFillP2                        :   7) @Run
[2018-01-12 18:13:27.767] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:13:27.867] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:28.157] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:28.207] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:28.207] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:28.497] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:28.547] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:28.547] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:28.697] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:28.747] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:28.747] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:28.897] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:28.947] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:28.947] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:29.117] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:29.167] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:29.167] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:29.457] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:29.507] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:29.507] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:29.757] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:29.807] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:29.807] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:29.957] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:30.007] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:13:30.007] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:30.077] (PreFillP1                        :   6) @Stop
[2018-01-12 18:13:30.317] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:30.367] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:13:30.367] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:30.517] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:30.567] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:13:30.567] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:30.667] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:30.717] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:13:30.717] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:30.867] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:30.917] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:13:30.917] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:31.127] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:31.177] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:13:31.177] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:31.327] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:13:31.377] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:13:31.377] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:13:31.377] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:13:31.417] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:13:31.457] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:13:31.457] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:13:31.457] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:13:31.557] (PreFillP2                        :   7) @Stop
[2018-01-12 18:13:31.577] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:31.627] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:13:31.757] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:13:32.007] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:13:32.007] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:32.007] (Flush Capillary                  :   9) @Run
[2018-01-12 18:13:32.007] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:13:32.057] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:13:32.057] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:13:32.057] (Flush Singulator                 :  10) @Run
[2018-01-12 18:13:32.057] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:13:32.157] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:32.427] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:32.477] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:32.477] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:32.787] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:32.837] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:32.837] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:33.087] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:33.137] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:33.137] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:33.287] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:33.337] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:33.337] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:33.507] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:33.557] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:33.557] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:33.847] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:33.897] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:33.897] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:34.057] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:13:34.157] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:34.207] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:13:34.207] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:34.257] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:13:34.357] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:13:34.407] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:13:34.407] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:13:34.407] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:13:34.457] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:13:34.537] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:13:34.537] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:13:34.537] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:13:34.557] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:34.607] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:13:34.627] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:13:34.877] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:13:34.877] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:34.877] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:13:34.877] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:13:34.927] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:13:34.927] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:13:34.927] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:13:34.927] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:13:35.027] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:35.317] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:35.367] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:35.367] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:35.657] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:35.707] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:35.707] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:35.857] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:35.907] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:35.907] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:36.057] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:36.107] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:36.107] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:36.277] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:36.327] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:13:36.327] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:36.377] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:13:36.617] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:36.667] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:13:36.667] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:36.717] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:13:36.817] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:13:36.867] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:13:36.867] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:13:36.867] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:13:36.887] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:13:36.887] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:13:36.887] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:13:36.887] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:13:36.887] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:13:36.887] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:13:36.887] (Prefill before Flush             :  14) @Run
[2018-01-12 18:13:36.887] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:13:36.887] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:13:36.887] (PreFillP1                        :  15) @Run
[2018-01-12 18:13:36.887] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:13:36.937] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:13:36.937] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:13:36.937] (PreFillP2                        :  16) @Run
[2018-01-12 18:13:36.937] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:13:37.037] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:37.327] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:13:37.377] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:13:37.377] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:37.567] (PreFillP1                        :  15) @Stop
[2018-01-12 18:13:37.667] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:13:37.717] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:13:37.717] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:37.767] (PreFillP2                        :  16) @Stop
[2018-01-12 18:13:37.867] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:13:37.917] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:13:37.917] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:13:37.917] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:13:37.937] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:13:37.957] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:13:37.957] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:12:45.167] (Detector                         :   2) @Stop
[2018-01-12 18:13:38.477] ** STARTING C02 MAIN ROUTINE **
[2018-01-12 18:13:38.477] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:13:38.477] (Main Well                        :   0) @Run
[2018-01-12 18:13:38.477] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:13:38.487] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:13:38.487] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:13:38.487] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:13:38.487] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:13:38.487] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:13:38.487] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:13:38.487] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:13:38.487] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:13:38.487] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:13:38.987] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:13:38.987] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:13:39.037] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:13:39.147] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:13:39.147] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:13:39.147] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:13:39.147] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:13:39.147] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:13:39.147] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:13:39.147] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:13:39.147] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:13:39.147] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:13:39.147] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:13:39.167] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:13:39.217] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:13:39.237] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:13:39.487] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:13:39.487] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:13:39.487] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:13:39.487] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:13:39.537] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:13:39.537] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:13:39.537] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:13:39.537] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:13:39.637] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:39.907] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:13:39.957] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:13:39.957] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:40.277] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:13:40.327] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:13:40.327] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:40.577] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:13:40.627] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:13:40.627] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:40.777] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:13:40.827] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:13:40.827] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:40.877] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:13:40.997] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:13:41.047] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:13:41.047] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:41.097] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:13:41.337] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:13:41.387] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:13:41.387] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:13:41.387] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:13:41.387] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:13:41.387] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:13:41.447] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:13:41.497] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:13:41.557] (Main Well                        :   0) Move to Well 26 with z-offset of 2540 um (Wait)
[2018-01-12 18:13:44.257] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:13:44.497] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:13:44.547] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:13:44.547] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:44.647] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:13:44.697] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:13:44.697] (Main Well                        :   0) Stop Pump
[2018-01-12 18:13:44.737] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:13:44.797] (Main Well                        :   0) Move to Well 26 with z-offset of 310 um (Wait)
[2018-01-12 18:13:54.377] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:13:54.617] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:13:54.667] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:13:54.667] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:13:54.667] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:13:54.667] (Pickup Sample                    :  21) @Run
[2018-01-12 18:13:54.667] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:13:59.337] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:14:01.779] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:14:01.859] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:14:02.059] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:02.159] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:02.209] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:02.209] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:02.309] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:02.359] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:02.359] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:02.459] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:02.509] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:02.509] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:02.619] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:02.669] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:02.669] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:02.859] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:02.909] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:02.909] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:03.009] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:03.059] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:03.059] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:03.159] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:03.209] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:03.209] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:03.309] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:03.359] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:03.359] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:03.569] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:03.619] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:03.619] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:03.719] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:03.769] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:03.769] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:03.869] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:03.919] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:03.919] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:04.019] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:04.069] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:04.069] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:04.279] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:04.329] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:04.329] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:04.429] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:04.479] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:04.479] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:04.579] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:04.629] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:04.629] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:04.729] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:04.779] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:04.779] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:04.989] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:05.039] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:05.039] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:05.139] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:05.189] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:05.189] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:05.289] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:05.339] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:05.339] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:05.439] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:05.489] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:05.489] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:05.699] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:05.749] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:05.749] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:05.849] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:05.899] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:05.899] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:05.999] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:06.049] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:06.049] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:06.149] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:06.199] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:06.199] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:06.409] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:06.459] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:06.459] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:06.559] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:06.609] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:06.609] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:06.709] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:06.759] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:06.759] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:06.859] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:06.909] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:06.909] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:07.119] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:07.169] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:07.169] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:07.269] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:07.319] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:07.319] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:07.419] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:07.469] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:07.469] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:07.569] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:07.619] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:07.619] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:07.829] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:07.879] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:07.879] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:07.979] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:08.029] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:08.029] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:08.129] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:08.179] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:08.179] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:08.279] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:08.329] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:08.329] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:08.539] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:08.589] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:08.589] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:08.689] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:08.739] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:08.739] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:08.839] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:08.889] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:08.889] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:08.989] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:09.039] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:09.039] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:09.249] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:09.299] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:09.299] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:09.399] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:09.449] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:09.449] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:09.549] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:09.599] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:09.599] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:09.699] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:09.749] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:09.749] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:09.959] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:10.009] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:10.009] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:10.109] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:10.159] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:10.159] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:10.259] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:10.309] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:10.309] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:10.409] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:10.459] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:10.459] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:10.669] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:10.719] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:10.719] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:10.819] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:10.869] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:10.869] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:10.969] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:11.019] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:11.019] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:11.119] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:11.169] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:11.169] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:11.379] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:11.429] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:14:11.429] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:11.529] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:14:11.579] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:14:11.579] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:14:11.579] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:14:11.869] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:14:11.959] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:14:12.209] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:14:12.229] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:14:12.279] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:14:12.279] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:14:12.279] (Singulate Sample                 :  22) @Run
[2018-01-12 18:14:12.279] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:14:12.279] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:14:12.279] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:14:12.339] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:14:12.389] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:14:12.449] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:14:12.549] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_C02_RAW.qlb"
[2018-01-12 18:14:12.659] (Detector                         :   2) @Run
[2018-01-12 18:14:12.659] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:14:52.559] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:14:53.509] (Detector                         :   2) @Stop
[2018-01-12 18:14:53.559] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:14:53.559] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:53.689] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:14:53.739] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:14:53.739] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:53.839] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:14:53.889] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:14:53.889] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:14:53.889] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:14:54.279] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:14:54.279] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:14:54.279] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:14:54.279] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:14:54.279] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:14:54.279] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:14:54.279] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:54.279] (PreFillP1                        :  24) @Run
[2018-01-12 18:14:54.279] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:14:54.329] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:14:54.329] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:14:54.329] (PreFillP2                        :  25) @Run
[2018-01-12 18:14:54.329] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:14:54.429] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:54.699] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:54.749] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:54.749] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:54.899] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:54.949] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:54.949] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:55.259] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:55.309] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:55.309] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:55.559] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:55.609] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:55.609] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:55.759] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:55.809] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:55.809] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:55.979] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:56.039] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:56.039] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:56.329] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:56.379] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:56.379] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:56.629] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:56.679] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:56.679] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:56.829] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:56.879] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:56.879] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:57.049] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:57.099] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:14:57.099] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:57.389] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:57.439] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:14:57.439] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:57.489] (PreFillP1                        :  24) @Stop
[2018-01-12 18:14:57.689] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:57.739] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:14:57.739] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:57.839] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:57.889] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:14:57.889] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:14:58.059] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:14:58.109] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:14:58.109] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:14:58.109] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:14:58.139] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:14:58.139] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:14:58.139] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:14:58.299] (PreFillP2                        :  25) @Stop
[2018-01-12 18:14:58.319] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:14:58.369] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:14:58.389] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:14:58.639] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:14:58.639] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:14:58.639] (Flush Capillary                  :  27) @Run
[2018-01-12 18:14:58.639] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:14:58.689] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:14:58.689] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:14:58.689] (Flush Singulator                 :  28) @Run
[2018-01-12 18:14:58.689] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:14:58.789] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:59.219] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:14:59.269] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:14:59.269] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:59.519] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:14:59.569] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:14:59.569] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:59.719] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:14:59.769] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:14:59.769] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:14:59.939] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:14:59.989] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:14:59.989] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:00.039] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:15:00.279] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:15:00.329] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:15:00.329] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:00.379] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:15:00.479] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:15:00.529] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:15:00.529] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:15:00.529] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:15:00.539] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:15:00.559] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:15:00.559] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:15:00.559] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:15:00.579] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:15:00.629] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:15:00.649] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:15:00.899] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:15:00.899] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:15:00.899] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:15:00.899] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:15:00.949] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:15:00.949] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:15:00.949] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:15:00.949] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:15:01.049] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:01.319] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:15:01.369] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:01.369] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:01.539] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:15:01.589] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:01.589] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:01.879] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:15:01.929] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:15:01.929] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:01.979] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:15:02.079] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:15:02.179] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:15:02.229] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:15:02.229] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:15:02.229] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:15:02.259] (Main Well                        :   0) Stop Pump
[2018-01-12 18:15:02.299] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:15:02.299] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:15:02.299] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:15:02.339] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:15:02.389] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:15:02.499] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:15:02.749] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:15:02.749] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:15:02.749] (Flush Capillary                  :  33) @Run
[2018-01-12 18:15:02.749] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:15:02.799] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:15:02.799] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:15:02.799] (Flush Singulator                 :  34) @Run
[2018-01-12 18:15:02.799] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:15:02.899] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:03.169] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:15:03.219] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:03.219] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:03.529] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:15:03.579] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:15:03.579] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:03.629] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:15:03.729] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:15:03.829] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:15:03.879] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:15:03.879] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:15:03.879] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:15:03.899] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:15:03.919] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:15:03.919] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:15:03.919] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:15:03.939] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:15:03.989] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:15:04.119] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:15:04.369] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:15:04.369] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:15:04.369] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:15:04.369] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:15:04.419] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:15:04.419] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:15:04.419] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:15:04.419] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:15:04.519] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:04.789] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:15:04.839] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:04.839] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:05.149] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:15:05.199] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:15:05.199] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:05.249] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:15:05.349] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:15:05.449] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:15:05.499] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:15:05.499] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:15:05.499] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:15:05.519] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:15:05.539] (Main Well                        :   0) Stop routine
[2018-01-12 18:15:05.539] (Main Well                        :   0) @Stop
[2018-01-12 18:15:05.569] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:15:05.569] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:15:05.579] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:15:05.579] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:15:05.719] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:15:05.719] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:15:07.569] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:15:07.569] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:15:07.569] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:15:07.569] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:15:07.739] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:15:07.739] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:14:53.509] (Detector                         :  17) @Stop
[2018-01-12 18:15:11.869] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:15:11.869] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:15:11.869] (MainPre Routine                  :   0) @Run
[2018-01-12 18:15:11.869] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:15:17.919] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:15:17.919] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:15:17.919] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:15:18.559] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:15:18.559] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:15:18.569] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:15:20.299] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:15:20.299] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:15:20.299] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:15:20.459] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:15:20.509] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:15:20.529] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:15:20.779] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:15:20.779] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:15:20.779] (Initialize P1                    :   3) @Run
[2018-01-12 18:15:20.779] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:15:20.829] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:15:20.829] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:15:20.829] (Initialize P2                    :   4) @Run
[2018-01-12 18:15:20.829] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:15:21.009] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:21.239] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:21.359] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:15:21.409] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:21.409] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:21.459] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:15:21.509] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:21.509] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:21.699] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:15:21.749] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:21.749] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:21.799] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:15:21.849] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:21.849] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:21.899] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:15:21.949] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:21.949] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:21.999] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:15:22.049] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:22.049] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:22.099] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:15:22.149] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:22.149] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:22.199] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:15:22.249] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:22.249] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:22.319] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:15:22.369] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:22.369] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:22.559] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:15:22.609] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:22.609] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:22.659] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:15:22.709] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:22.709] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:22.759] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:15:22.809] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:22.809] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:22.859] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:15:22.909] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:22.909] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:22.959] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:15:23.009] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:23.009] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:23.059] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:15:23.109] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:23.109] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:23.179] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:15:23.229] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:23.229] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:23.419] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:15:23.469] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:23.469] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:23.519] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:15:23.569] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:15:23.569] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:23.619] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:15:23.669] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:15:23.669] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:15:23.669] (Initialize P1                    :   3) @Stop
[2018-01-12 18:15:23.719] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:15:23.769] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:15:23.769] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:15:23.769] (Initialize P2                    :   4) @Stop
[2018-01-12 18:15:24.029] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:15:24.229] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:15:24.249] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:15:24.249] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:15:24.249] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:15:24.249] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:15:24.249] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:24.249] (PreFillP1                        :   6) @Run
[2018-01-12 18:15:24.249] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:15:24.299] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:15:24.299] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:15:24.299] (PreFillP2                        :   7) @Run
[2018-01-12 18:15:24.299] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:15:24.399] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:24.669] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:24.719] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:24.719] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:25.029] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:25.079] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:25.079] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:25.329] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:25.379] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:25.379] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:25.529] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:25.579] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:25.579] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:25.749] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:25.799] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:25.799] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:26.089] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:26.139] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:26.139] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:26.389] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:26.439] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:15:26.439] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:26.489] (PreFillP1                        :   6) @Stop
[2018-01-12 18:15:26.589] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:26.639] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:15:26.639] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:26.809] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:26.859] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:15:26.859] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:27.049] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:27.099] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:15:27.099] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:27.249] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:27.299] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:15:27.299] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:27.399] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:27.449] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:15:27.449] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:27.599] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:27.649] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:15:27.649] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:27.859] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:27.909] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:15:27.909] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:15:27.909] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:15:27.949] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:15:27.959] (PreFillP2                        :   7) @Stop
[2018-01-12 18:15:27.999] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:15:27.999] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:15:27.999] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:15:28.019] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:28.069] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:15:28.089] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:15:28.339] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:15:28.339] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:28.339] (Flush Capillary                  :   9) @Run
[2018-01-12 18:15:28.339] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:15:28.389] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:15:28.389] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:15:28.389] (Flush Singulator                 :  10) @Run
[2018-01-12 18:15:28.389] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:15:28.489] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:28.739] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:28.789] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:28.789] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:28.939] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:28.989] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:28.989] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:29.159] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:29.209] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:29.209] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:29.499] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:29.549] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:29.549] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:29.799] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:29.849] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:29.849] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:29.999] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:30.049] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:30.049] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:30.219] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:30.269] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:30.269] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:30.559] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:30.609] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:15:30.609] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:30.659] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:15:30.759] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:15:30.859] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:30.909] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:15:30.909] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:15:30.909] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:15:30.949] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:15:30.969] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:15:30.969] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:15:30.969] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:15:31.009] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:31.059] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:15:31.169] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:15:31.419] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:15:31.419] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:31.419] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:15:31.419] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:15:31.469] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:15:31.469] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:15:31.469] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:15:31.469] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:15:31.569] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:31.839] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:31.889] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:31.889] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:32.199] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:32.249] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:32.249] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:32.499] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:32.549] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:32.549] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:32.699] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:32.749] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:32.749] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:32.919] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:32.969] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:32.969] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:33.019] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:15:33.259] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:33.309] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:15:33.309] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:33.359] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:15:33.459] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:33.509] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:15:33.509] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:15:33.509] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:15:33.519] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:15:33.519] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:15:33.519] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:15:33.519] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:15:33.519] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:15:33.519] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:15:33.519] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:33.519] (PreFillP1                        :   6) @Run
[2018-01-12 18:15:33.519] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:15:33.569] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:15:33.569] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:15:33.569] (PreFillP2                        :   7) @Run
[2018-01-12 18:15:33.569] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:15:33.669] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:33.959] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:34.009] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:34.009] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:34.299] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:34.349] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:34.349] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:34.499] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:34.549] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:34.549] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:34.699] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:34.749] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:34.749] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:34.919] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:34.969] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:34.969] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:35.259] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:35.309] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:35.309] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:35.559] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:35.609] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:35.609] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:35.759] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:35.809] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:15:35.809] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:35.859] (PreFillP1                        :   6) @Stop
[2018-01-12 18:15:35.979] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:36.029] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:15:36.029] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:36.319] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:36.369] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:15:36.369] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:36.519] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:36.569] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:15:36.569] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:36.669] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:36.719] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:15:36.719] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:36.889] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:36.939] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:15:36.939] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:37.129] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:15:37.179] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:15:37.179] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:15:37.179] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:15:37.219] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:15:37.229] (PreFillP2                        :   7) @Stop
[2018-01-12 18:15:37.269] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:15:37.269] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:15:37.269] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:15:37.289] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:37.339] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:15:37.359] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:15:37.609] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:15:37.609] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:37.609] (Flush Capillary                  :   9) @Run
[2018-01-12 18:15:37.609] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:15:37.659] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:15:37.659] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:15:37.659] (Flush Singulator                 :  10) @Run
[2018-01-12 18:15:37.659] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:15:37.759] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:38.009] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:38.059] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:38.059] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:38.209] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:38.259] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:38.259] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:38.429] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:38.479] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:38.479] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:38.769] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:38.819] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:38.819] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:39.069] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:39.119] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:39.119] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:39.269] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:39.319] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:39.319] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:39.489] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:39.539] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:39.539] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:39.829] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:39.879] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:15:39.879] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:39.929] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:15:40.029] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:15:40.129] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:15:40.179] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:15:40.179] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:15:40.179] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:15:40.219] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:15:40.239] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:15:40.239] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:15:40.239] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:15:40.279] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:40.329] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:15:40.439] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:15:40.689] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:15:40.689] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:40.689] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:15:40.689] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:15:40.739] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:15:40.739] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:15:40.739] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:15:40.739] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:15:40.839] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:41.109] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:41.159] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:41.159] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:41.469] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:41.519] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:41.519] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:41.769] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:41.819] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:41.819] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:41.969] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:42.019] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:42.019] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:42.189] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:42.239] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:15:42.239] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:42.289] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:15:42.529] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:42.579] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:15:42.579] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:42.629] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:15:42.729] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:15:42.779] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:15:42.779] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:15:42.779] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:15:42.789] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:15:42.789] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:15:42.789] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:15:42.789] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:15:42.789] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:15:42.789] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:15:42.789] (Prefill before Flush             :  14) @Run
[2018-01-12 18:15:42.789] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:15:42.789] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:15:42.789] (PreFillP1                        :  15) @Run
[2018-01-12 18:15:42.789] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:15:42.839] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:15:42.839] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:15:42.839] (PreFillP2                        :  16) @Run
[2018-01-12 18:15:42.839] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:15:42.939] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:43.229] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:15:43.279] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:15:43.279] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:43.469] (PreFillP1                        :  15) @Stop
[2018-01-12 18:15:43.569] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:15:43.619] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:15:43.619] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:43.669] (PreFillP2                        :  16) @Stop
[2018-01-12 18:15:43.769] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:15:43.819] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:15:43.819] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:15:43.819] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:15:43.839] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:15:43.859] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:15:43.859] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:14:53.509] (Detector                         :   2) @Stop
[2018-01-12 18:15:43.949] ** STARTING D02 MAIN ROUTINE **
[2018-01-12 18:15:43.949] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:15:43.949] (Main Well                        :   0) @Run
[2018-01-12 18:15:43.949] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:15:43.949] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:15:43.949] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:15:43.949] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:15:43.949] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:15:43.949] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:15:43.949] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:15:43.949] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:15:43.949] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:15:43.949] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:15:44.529] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:15:44.529] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:15:44.549] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:15:44.549] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:15:44.689] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:15:44.689] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:15:44.689] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:15:44.689] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:15:44.689] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:15:44.689] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:15:44.689] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:15:44.689] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:15:44.689] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:15:44.709] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:15:44.759] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:15:44.779] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:15:45.029] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:15:45.029] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:15:45.029] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:15:45.029] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:15:45.079] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:15:45.079] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:15:45.079] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:15:45.079] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:15:45.179] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:45.449] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:15:45.499] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:15:45.499] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:45.809] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:15:45.859] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:15:45.859] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:46.109] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:15:46.159] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:15:46.159] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:46.309] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:15:46.359] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:15:46.359] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:46.409] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:15:46.529] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:15:46.579] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:15:46.579] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:46.629] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:15:46.869] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:15:46.919] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:15:46.919] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:15:46.919] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:15:46.919] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:15:46.919] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:15:46.979] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:15:47.029] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:15:47.089] (Main Well                        :   0) Move to Well 38 with z-offset of 2540 um (Wait)
[2018-01-12 18:15:49.889] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:15:50.129] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:15:50.179] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:15:50.179] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:15:50.279] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:15:50.329] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:15:50.329] (Main Well                        :   0) Stop Pump
[2018-01-12 18:15:50.369] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:15:50.429] (Main Well                        :   0) Move to Well 38 with z-offset of 310 um (Wait)
[2018-01-12 18:16:00.349] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:00.589] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:16:00.639] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:16:00.639] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:16:00.639] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:16:00.639] (Pickup Sample                    :  21) @Run
[2018-01-12 18:16:00.639] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:16:05.309] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:16:07.749] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:16:07.829] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:16:08.029] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:08.129] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:08.179] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:08.179] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:08.279] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:08.329] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:08.329] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:08.429] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:08.479] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:08.479] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:08.589] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:08.639] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:08.639] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:08.829] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:08.879] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:08.879] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:08.979] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:09.029] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:09.029] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:09.129] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:09.179] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:09.179] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:09.279] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:09.329] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:09.329] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:09.539] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:09.589] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:09.589] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:09.689] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:09.739] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:09.739] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:09.839] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:09.889] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:09.889] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:09.989] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:10.039] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:10.039] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:10.249] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:10.299] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:10.299] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:10.399] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:10.449] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:10.449] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:10.549] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:10.599] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:10.599] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:10.699] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:10.749] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:10.749] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:10.959] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:11.009] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:11.009] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:11.109] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:11.159] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:11.159] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:11.259] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:11.309] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:11.309] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:11.409] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:11.459] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:11.459] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:11.669] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:11.719] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:11.719] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:11.819] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:11.869] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:11.869] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:11.969] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:12.019] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:12.019] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:12.119] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:12.169] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:12.169] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:12.379] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:12.429] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:12.429] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:12.529] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:12.579] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:12.579] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:12.679] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:12.729] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:12.729] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:12.829] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:12.879] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:12.879] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:13.089] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:13.139] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:13.139] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:13.239] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:13.289] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:13.289] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:13.389] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:13.439] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:13.439] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:13.539] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:13.589] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:13.589] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:13.799] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:13.849] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:13.849] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:13.949] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:13.999] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:13.999] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:14.109] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:14.159] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:14.159] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:14.259] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:14.309] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:14.309] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:14.519] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:14.569] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:14.569] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:14.669] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:14.719] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:14.719] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:14.819] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:14.869] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:14.869] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:14.969] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:15.019] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:15.019] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:15.229] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:15.279] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:15.279] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:15.379] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:15.429] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:15.429] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:15.529] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:15.579] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:15.579] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:15.679] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:15.729] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:15.729] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:15.939] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:15.989] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:15.989] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:16.089] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:16.139] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:16.139] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:16.239] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:16.289] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:16.289] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:16.389] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:16.439] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:16.439] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:16.649] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:16.699] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:16.699] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:16.799] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:16.849] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:16.849] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:16.949] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:16.999] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:16.999] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:17.099] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:17.149] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:16:17.149] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:17.359] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:17.409] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:16:17.409] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:16:17.509] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:16:17.559] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:16:17.559] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:16:17.559] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:16:17.839] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:16:17.939] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:16:18.189] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:16:18.209] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:16:18.259] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:16:18.259] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:16:18.259] (Singulate Sample                 :  22) @Run
[2018-01-12 18:16:18.259] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:16:18.259] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:16:18.259] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:16:18.319] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:16:18.369] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:16:18.429] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:16:18.529] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_D02_RAW.qlb"
[2018-01-12 18:16:18.639] (Detector                         :   2) @Run
[2018-01-12 18:16:18.639] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:16:58.540] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:16:59.530] (Detector                         :   2) @Stop
[2018-01-12 18:16:59.540] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:16:59.540] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:16:59.680] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:16:59.730] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:16:59.730] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:16:59.830] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:16:59.880] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:16:59.880] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:16:59.880] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:17:00.260] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:17:00.260] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:17:00.260] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:17:00.260] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:17:00.260] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:17:00.260] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:17:00.260] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:00.260] (PreFillP1                        :  24) @Run
[2018-01-12 18:17:00.260] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:17:00.310] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:17:00.310] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:17:00.310] (PreFillP2                        :  25) @Run
[2018-01-12 18:17:00.310] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:17:00.410] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:00.680] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:00.730] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:17:00.730] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:00.880] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:00.930] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:17:00.930] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:01.240] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:01.290] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:17:01.290] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:01.540] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:01.590] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:17:01.590] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:01.740] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:01.790] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:17:01.790] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:01.960] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:02.010] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:17:02.010] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:02.300] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:02.350] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:17:02.350] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:02.600] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:02.650] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:17:02.650] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:02.800] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:02.850] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:17:02.850] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:03.020] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:03.070] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:17:03.070] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:03.360] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:03.410] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:17:03.410] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:17:03.460] (PreFillP1                        :  24) @Stop
[2018-01-12 18:17:03.660] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:03.710] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:17:03.710] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:17:03.810] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:03.860] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:17:03.860] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:17:04.030] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:17:04.080] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:17:04.080] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:17:04.080] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:17:04.110] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:17:04.110] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:17:04.110] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:17:04.270] (PreFillP2                        :  25) @Stop
[2018-01-12 18:17:04.290] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:17:04.340] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:17:04.360] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:17:04.610] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:17:04.610] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:17:04.610] (Flush Capillary                  :  27) @Run
[2018-01-12 18:17:04.610] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:17:04.660] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:17:04.660] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:17:04.660] (Flush Singulator                 :  28) @Run
[2018-01-12 18:17:04.660] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:17:04.760] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:05.200] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:17:05.250] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:17:05.250] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:05.500] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:17:05.550] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:17:05.550] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:05.700] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:17:05.750] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:17:05.750] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:05.920] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:17:05.970] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:17:05.970] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:06.020] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:17:06.260] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:17:06.310] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:17:06.310] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:17:06.360] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:17:06.460] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:17:06.510] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:17:06.510] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:17:06.510] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:17:06.560] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:17:06.580] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:17:06.580] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:17:06.580] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:17:06.600] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:17:06.650] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:17:06.670] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:17:06.920] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:17:06.920] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:17:06.920] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:17:06.920] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:17:06.970] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:17:06.970] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:17:06.970] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:17:06.970] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:17:07.070] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:07.340] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:17:07.390] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:17:07.390] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:07.700] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:17:07.750] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:17:07.750] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:17:07.800] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:17:07.900] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:17:08.000] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:17:08.050] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:17:08.050] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:17:08.050] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:17:08.080] (Main Well                        :   0) Stop Pump
[2018-01-12 18:17:08.120] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:17:08.120] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:17:08.120] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:17:08.160] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:17:08.210] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:17:08.320] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:17:08.570] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:17:08.570] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:17:08.570] (Flush Capillary                  :  33) @Run
[2018-01-12 18:17:08.570] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:17:08.620] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:17:08.620] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:17:08.620] (Flush Singulator                 :  34) @Run
[2018-01-12 18:17:08.620] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:17:08.720] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:08.990] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:17:09.040] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:17:09.040] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:09.350] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:17:09.400] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:17:09.400] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:17:09.450] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:17:09.550] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:17:09.650] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:17:09.700] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:17:09.700] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:17:09.700] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:17:09.720] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:17:09.740] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:17:09.740] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:17:09.740] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:17:09.760] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:17:09.810] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:17:09.940] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:17:10.190] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:17:10.190] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:17:10.190] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:17:10.190] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:17:10.240] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:17:10.240] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:17:10.240] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:17:10.240] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:17:10.340] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:10.610] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:17:10.660] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:17:10.660] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:17:10.970] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:17:11.020] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:17:11.020] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:17:11.070] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:17:11.170] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:17:11.270] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:17:11.320] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:17:11.320] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:17:11.320] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:17:11.340] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:17:11.360] (Main Well                        :   0) Stop routine
[2018-01-12 18:17:11.360] (Main Well                        :   0) @Stop
[2018-01-12 18:17:11.530] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:17:11.530] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:17:11.540] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:17:11.540] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:17:11.560] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:17:11.560] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:17:13.530] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:17:13.530] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:17:13.530] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:17:13.530] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:17:13.570] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:17:13.570] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:16:59.530] (Detector                         :  17) @Stop
[2018-01-12 18:19:23.341] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:19:23.341] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:19:23.341] (MainPre Routine                  :   0) @Run
[2018-01-12 18:19:23.341] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:19:29.501] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:19:29.501] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:19:29.501] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:19:30.141] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:19:30.141] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:19:30.151] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:19:31.881] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:19:31.881] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:19:31.881] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:19:32.041] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:19:32.091] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:19:32.111] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:19:32.361] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:19:32.361] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:19:32.361] (Initialize P1                    :   3) @Run
[2018-01-12 18:19:32.361] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:19:32.411] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:19:32.411] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:19:32.411] (Initialize P2                    :   4) @Run
[2018-01-12 18:19:32.411] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:19:32.591] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:32.821] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:32.941] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:19:32.991] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:32.991] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:33.041] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:19:33.091] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:33.091] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:33.281] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:19:33.331] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:33.331] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:33.381] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:19:33.431] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:33.431] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:33.481] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:19:33.531] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:33.531] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:33.581] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:19:33.631] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:33.631] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:33.681] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:19:33.731] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:33.731] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:33.781] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:19:33.831] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:33.831] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:33.901] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:19:33.951] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:33.951] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:34.151] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:19:34.201] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:34.201] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:34.251] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:19:34.301] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:34.301] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:34.351] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:19:34.401] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:34.401] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:34.451] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:19:34.501] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:34.501] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:34.551] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:19:34.601] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:34.601] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:34.651] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:19:34.701] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:34.701] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:34.771] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:19:34.821] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:34.821] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:35.011] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:19:35.061] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:19:35.061] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:19:35.061] (Initialize P1                    :   3) @Stop
[2018-01-12 18:19:35.111] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:19:35.161] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:19:35.161] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:35.261] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:19:35.311] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:19:35.311] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:19:35.311] (Initialize P2                    :   4) @Stop
[2018-01-12 18:19:35.411] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:19:35.611] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:19:35.631] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:19:35.631] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:19:35.631] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:19:35.631] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:19:35.631] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:35.631] (PreFillP1                        :   6) @Run
[2018-01-12 18:19:35.631] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:19:35.681] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:19:35.681] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:19:35.681] (PreFillP2                        :   7) @Run
[2018-01-12 18:19:35.681] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:19:35.781] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:36.051] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:36.101] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:36.101] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:36.271] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:36.321] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:36.321] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:36.611] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:36.661] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:36.661] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:36.911] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:36.961] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:36.961] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:37.111] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:37.161] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:37.161] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:37.331] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:37.381] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:37.381] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:37.671] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:37.721] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:37.721] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:37.871] (PreFillP1                        :   6) @Stop
[2018-01-12 18:19:37.971] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:38.021] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:19:38.021] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:38.171] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:38.221] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:19:38.221] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:38.431] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:38.481] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:19:38.481] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:38.631] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:38.681] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:19:38.681] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:38.781] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:38.831] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:19:38.831] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:38.981] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:39.031] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:19:39.031] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:39.241] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:39.291] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:19:39.291] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:19:39.291] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:19:39.331] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:19:39.341] (PreFillP2                        :   7) @Stop
[2018-01-12 18:19:39.381] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:19:39.381] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:19:39.381] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:19:39.401] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:39.451] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:19:39.471] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:19:39.721] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:19:39.721] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:39.721] (Flush Capillary                  :   9) @Run
[2018-01-12 18:19:39.721] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:19:39.771] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:19:39.771] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:19:39.771] (Flush Singulator                 :  10) @Run
[2018-01-12 18:19:39.771] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:19:39.871] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:40.121] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:40.171] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:40.171] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:40.321] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:40.371] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:40.371] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:40.541] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:40.591] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:40.591] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:40.881] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:40.931] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:40.931] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:41.181] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:41.231] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:41.231] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:41.381] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:41.431] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:41.431] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:41.601] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:41.651] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:41.651] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:41.941] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:41.991] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:19:41.991] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:42.041] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:19:42.141] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:19:42.241] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:42.291] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:19:42.291] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:19:42.291] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:19:42.331] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:19:42.351] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:19:42.351] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:19:42.351] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:19:42.391] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:42.441] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:19:42.551] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:19:42.801] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:19:42.801] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:42.801] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:19:42.801] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:19:42.851] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:19:42.851] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:19:42.851] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:19:42.851] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:19:42.951] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:43.221] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:43.271] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:43.271] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:43.581] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:43.631] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:43.631] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:43.881] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:43.931] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:43.931] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:44.081] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:44.131] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:44.131] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:44.441] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:44.491] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:19:44.491] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:44.541] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:19:44.641] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:19:44.741] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:44.791] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:19:44.791] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:19:44.791] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:19:44.801] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:19:44.801] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:19:44.801] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:19:44.801] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:19:44.801] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:19:44.801] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:19:44.801] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:44.801] (PreFillP1                        :   6) @Run
[2018-01-12 18:19:44.801] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:19:44.851] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:19:44.851] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:19:44.851] (PreFillP2                        :   7) @Run
[2018-01-12 18:19:44.851] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:19:44.951] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:45.381] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:45.431] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:45.431] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:45.581] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:45.631] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:45.631] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:45.781] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:45.831] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:45.831] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:46.001] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:46.051] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:46.051] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:46.341] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:46.391] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:46.391] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:46.641] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:46.691] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:46.691] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:46.841] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:46.891] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:46.891] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:47.061] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:47.111] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:19:47.111] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:47.171] (PreFillP1                        :   6) @Stop
[2018-01-12 18:19:47.411] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:47.461] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:19:47.461] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:47.611] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:47.661] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:19:47.661] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:47.761] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:47.811] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:19:47.811] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:47.961] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:48.011] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:19:48.011] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:48.221] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:48.271] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:19:48.271] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:48.421] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:48.471] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:19:48.471] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:48.571] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:19:48.621] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:19:48.621] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:19:48.621] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:19:48.651] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:19:48.671] (PreFillP2                        :   7) @Stop
[2018-01-12 18:19:48.731] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:19:48.731] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:19:48.731] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:19:48.891] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:48.941] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:19:48.961] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:19:49.211] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:19:49.211] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:49.211] (Flush Capillary                  :   9) @Run
[2018-01-12 18:19:49.211] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:19:49.261] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:19:49.261] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:19:49.261] (Flush Singulator                 :  10) @Run
[2018-01-12 18:19:49.261] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:19:49.361] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:49.631] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:49.681] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:49.681] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:49.991] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:50.041] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:50.041] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:50.291] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:50.341] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:50.341] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:50.491] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:50.541] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:50.541] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:50.711] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:50.761] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:50.761] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:51.051] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:51.101] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:51.101] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:51.351] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:51.401] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:19:51.401] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:51.451] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:19:51.551] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:19:51.601] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:19:51.601] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:19:51.601] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:19:51.631] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:19:51.651] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:19:51.691] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:19:51.691] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:19:51.691] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:19:51.851] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:51.901] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:19:51.921] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:19:52.171] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:19:52.171] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:52.171] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:19:52.171] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:19:52.221] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:19:52.221] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:19:52.221] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:19:52.221] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:19:52.321] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:52.591] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:52.641] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:52.641] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:52.951] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:53.001] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:53.001] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:53.251] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:53.301] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:53.301] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:53.451] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:53.501] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:53.501] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:53.671] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:53.721] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:19:53.721] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:53.771] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:19:54.011] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:54.061] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:19:54.061] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:54.111] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:19:54.211] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:19:54.261] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:19:54.261] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:19:54.261] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:19:54.291] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:19:54.291] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:19:54.291] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:19:54.291] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:19:54.291] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:19:54.291] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:19:54.291] (Prefill before Flush             :  14) @Run
[2018-01-12 18:19:54.291] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:19:54.291] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:19:54.291] (PreFillP1                        :  15) @Run
[2018-01-12 18:19:54.291] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:19:54.341] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:19:54.341] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:19:54.341] (PreFillP2                        :  16) @Run
[2018-01-12 18:19:54.341] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:19:54.441] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:54.731] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:19:54.781] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:19:54.781] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:54.971] (PreFillP1                        :  15) @Stop
[2018-01-12 18:19:55.071] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:19:55.121] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:19:55.121] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:55.171] (PreFillP2                        :  16) @Stop
[2018-01-12 18:19:55.271] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:19:55.321] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:19:55.321] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:19:55.321] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:19:55.341] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:19:55.361] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:19:55.361] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:16:59.530] (Detector                         :   2) @Stop
[2018-01-12 18:19:55.911] ** STARTING E02 MAIN ROUTINE **
[2018-01-12 18:19:55.911] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:19:55.911] (Main Well                        :   0) @Run
[2018-01-12 18:19:55.911] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:19:55.911] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:19:55.911] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:19:55.911] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:19:55.911] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:19:55.911] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:19:55.911] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:19:55.911] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:19:55.911] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:19:55.911] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:19:56.421] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:19:56.421] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:19:56.461] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:19:56.581] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:19:56.581] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:19:56.581] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:19:56.581] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:19:56.581] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:19:56.581] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:19:56.581] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:19:56.581] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:19:56.581] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:19:56.581] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:19:56.601] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:19:56.651] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:19:56.671] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:19:56.921] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:19:56.921] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:19:56.921] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:19:56.921] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:19:56.971] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:19:56.971] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:19:56.971] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:19:56.971] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:19:57.071] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:57.341] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:19:57.391] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:19:57.391] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:57.701] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:19:57.751] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:19:57.751] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:58.001] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:19:58.051] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:19:58.051] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:58.201] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:19:58.251] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:19:58.251] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:19:58.301] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:19:58.421] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:19:58.471] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:19:58.471] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:19:58.521] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:19:58.761] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:19:58.811] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:19:58.811] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:19:58.811] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:19:58.811] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:19:58.811] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:19:58.871] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:19:58.921] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:19:58.981] (Main Well                        :   0) Move to Well 50 with z-offset of 2540 um (Wait)
[2018-01-12 18:20:01.841] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:20:02.081] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:20:02.131] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:20:02.131] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:02.231] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:20:02.281] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:20:02.281] (Main Well                        :   0) Stop Pump
[2018-01-12 18:20:02.321] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:20:02.381] (Main Well                        :   0) Move to Well 50 with z-offset of 310 um (Wait)
[2018-01-12 18:20:11.261] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:11.501] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:20:11.551] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:20:11.551] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:20:11.551] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:20:11.551] (Pickup Sample                    :  21) @Run
[2018-01-12 18:20:11.551] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:20:16.221] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:20:18.841] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:20:18.921] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:20:19.121] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:19.221] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:19.271] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:19.271] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:19.371] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:19.421] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:19.421] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:19.521] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:19.571] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:19.571] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:19.681] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:19.731] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:19.731] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:19.921] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:19.971] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:19.971] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:20.071] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:20.121] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:20.121] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:20.221] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:20.271] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:20.271] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:20.371] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:20.421] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:20.421] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:20.631] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:20.681] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:20.681] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:20.781] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:20.831] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:20.831] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:20.931] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:20.981] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:20.981] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:21.081] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:21.131] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:21.131] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:21.341] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:21.391] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:21.391] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:21.491] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:21.541] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:21.541] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:21.641] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:21.691] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:21.691] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:21.791] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:21.841] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:21.841] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:22.051] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:22.101] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:22.101] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:22.201] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:22.251] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:22.251] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:22.351] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:22.401] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:22.401] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:22.501] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:22.551] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:22.551] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:22.761] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:22.811] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:22.811] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:22.911] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:22.961] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:22.961] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:23.061] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:23.111] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:23.111] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:23.211] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:23.261] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:23.261] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:23.471] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:23.521] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:23.521] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:23.621] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:23.671] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:23.671] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:23.771] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:23.821] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:23.821] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:23.921] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:23.971] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:23.971] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:24.181] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:24.231] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:24.231] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:24.331] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:24.381] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:24.381] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:24.481] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:24.531] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:24.531] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:24.631] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:24.681] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:24.681] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:24.891] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:24.941] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:24.941] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:25.041] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:25.091] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:25.091] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:25.191] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:25.241] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:25.241] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:25.341] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:25.391] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:25.391] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:25.601] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:25.651] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:25.651] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:25.751] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:25.801] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:25.801] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:25.901] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:25.951] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:25.951] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:26.051] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:26.101] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:26.101] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:26.321] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:26.371] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:26.371] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:26.471] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:26.521] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:26.521] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:26.621] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:26.671] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:26.671] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:26.771] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:26.821] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:26.821] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:27.031] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:27.091] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:27.091] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:27.191] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:27.241] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:27.241] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:27.341] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:27.391] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:27.391] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:27.491] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:27.541] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:27.541] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:27.751] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:27.801] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:27.801] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:27.901] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:27.951] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:27.951] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:28.051] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:28.101] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:28.101] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:28.201] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:28.251] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:20:28.251] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:20:28.461] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:28.511] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:20:28.511] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:20:28.611] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:20:28.661] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:20:28.661] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:20:28.661] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:20:28.951] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:20:29.041] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:20:29.291] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:20:29.311] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:20:29.361] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:20:29.361] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:20:29.361] (Singulate Sample                 :  22) @Run
[2018-01-12 18:20:29.361] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:20:29.361] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:20:29.361] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:20:29.421] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:20:29.471] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:20:29.531] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:20:29.631] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_E02_RAW.qlb"
[2018-01-12 18:20:29.731] (Detector                         :   2) @Run
[2018-01-12 18:20:29.731] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:21:09.633] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:21:10.093] (Detector                         :   2) @Stop
[2018-01-12 18:21:10.233] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:21:10.233] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:10.333] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:21:10.383] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:21:10.383] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:10.493] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:21:10.543] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:21:10.543] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:21:10.543] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:21:10.763] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:21:10.763] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:21:10.763] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:21:10.763] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:21:10.763] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:21:10.763] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:21:10.763] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:10.763] (PreFillP1                        :  24) @Run
[2018-01-12 18:21:10.763] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:21:10.813] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:21:10.813] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:21:10.813] (PreFillP2                        :  25) @Run
[2018-01-12 18:21:10.813] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:21:10.913] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:11.213] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:11.263] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:11.263] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:11.573] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:11.623] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:11.623] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:11.873] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:11.923] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:11.923] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:12.073] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:12.123] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:12.123] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:12.293] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:12.343] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:12.343] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:12.633] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:12.683] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:12.683] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:12.933] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:12.983] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:12.983] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:13.133] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:13.183] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:13.183] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:13.353] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:13.403] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:13.403] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:13.693] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:13.743] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:21:13.743] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:13.893] (PreFillP1                        :  24) @Stop
[2018-01-12 18:21:13.993] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:14.043] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:14.043] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:14.193] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:14.243] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:14.243] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:14.453] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:14.503] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:14.503] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:14.553] (PreFillP2                        :  25) @Stop
[2018-01-12 18:21:14.653] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:21:14.703] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:21:14.703] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:21:14.703] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:21:14.713] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:21:14.713] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:21:14.713] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:21:14.733] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:21:14.783] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:21:14.803] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:21:15.053] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:21:15.053] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:21:15.053] (Flush Capillary                  :  27) @Run
[2018-01-12 18:21:15.053] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:21:15.103] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:21:15.103] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:21:15.103] (Flush Singulator                 :  28) @Run
[2018-01-12 18:21:15.103] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:21:15.203] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:15.473] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:21:15.523] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:15.523] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:15.693] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:21:15.743] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:15.743] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:16.033] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:21:16.083] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:16.083] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:16.333] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:21:16.383] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:16.383] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:16.433] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:21:16.533] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:21:16.583] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:21:16.583] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:16.653] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:21:16.893] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:21:16.943] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:21:16.943] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:21:16.943] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:21:16.963] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:21:16.983] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:21:16.983] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:21:16.983] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:21:17.003] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:21:17.053] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:21:17.073] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:21:17.323] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:21:17.323] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:21:17.323] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:21:17.323] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:21:17.373] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:21:17.373] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:21:17.373] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:21:17.373] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:21:17.473] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:17.673] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:21:17.723] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:17.723] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:17.973] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:21:18.023] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:18.023] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:18.333] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:21:18.383] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:21:18.383] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:18.433] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:21:18.533] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:21:18.633] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:21:18.683] (Main Well                        :   0) Stop Pump
[2018-01-12 18:21:18.683] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:21:18.683] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:21:18.683] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:21:18.723] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:21:18.723] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:21:18.723] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:21:18.743] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:21:18.793] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:21:18.923] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:21:19.173] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:21:19.173] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:21:19.173] (Flush Capillary                  :  33) @Run
[2018-01-12 18:21:19.173] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:21:19.223] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:21:19.223] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:21:19.223] (Flush Singulator                 :  34) @Run
[2018-01-12 18:21:19.223] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:21:19.323] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:19.593] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:21:19.643] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:19.643] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:19.953] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:21:20.003] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:21:20.003] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:20.053] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:21:20.153] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:21:20.253] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:21:20.303] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:21:20.303] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:21:20.303] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:21:20.323] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:21:20.343] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:21:20.343] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:21:20.343] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:21:20.363] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:21:20.413] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:21:20.543] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:21:20.793] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:21:20.793] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:21:20.793] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:21:20.793] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:21:20.843] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:21:20.843] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:21:20.843] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:21:20.843] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:21:20.943] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:21.213] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:21:21.263] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:21.263] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:21.573] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:21:21.623] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:21:21.623] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:21.673] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:21:21.773] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:21:21.873] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:21:21.923] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:21:21.923] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:21:21.923] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:21:21.943] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:21:21.963] (Main Well                        :   0) Stop routine
[2018-01-12 18:21:21.963] (Main Well                        :   0) @Stop
[2018-01-12 18:21:22.423] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:21:22.423] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:21:22.423] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:21:22.423] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:21:22.423] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:21:22.423] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:21:24.423] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:21:24.423] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:21:24.423] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:21:24.423] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:21:24.463] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:21:24.463] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:21:10.093] (Detector                         :  17) @Stop
[2018-01-12 18:21:29.263] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:21:29.263] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:21:29.263] (MainPre Routine                  :   0) @Run
[2018-01-12 18:21:29.263] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:21:35.373] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:21:35.373] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:21:35.373] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:21:36.013] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:21:36.013] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:21:36.023] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:21:37.753] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:21:37.753] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:21:37.753] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:21:37.913] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:21:37.963] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:21:37.983] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:21:38.233] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:21:38.233] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:21:38.233] (Initialize P1                    :   3) @Run
[2018-01-12 18:21:38.233] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:21:38.283] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:21:38.283] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:21:38.283] (Initialize P2                    :   4) @Run
[2018-01-12 18:21:38.283] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:21:38.463] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:38.693] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:38.813] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:21:38.863] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:38.863] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:38.913] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:21:38.963] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:38.963] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:39.153] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:21:39.203] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:39.203] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:39.253] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:21:39.303] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:39.303] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:39.353] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:21:39.403] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:39.403] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:39.453] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:21:39.503] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:39.503] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:39.553] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:21:39.603] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:39.603] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:39.653] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:21:39.703] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:39.703] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:39.773] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:21:39.823] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:39.823] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:40.013] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:21:40.063] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:40.063] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:40.113] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:21:40.163] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:40.163] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:40.213] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:21:40.263] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:40.263] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:40.313] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:21:40.363] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:40.363] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:40.413] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:21:40.463] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:40.463] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:40.513] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:21:40.563] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:40.563] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:40.633] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:21:40.683] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:40.683] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:40.873] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:21:40.923] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:40.923] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:40.973] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:21:41.023] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:21:41.023] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:41.073] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:21:41.123] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:21:41.123] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:21:41.123] (Initialize P1                    :   3) @Stop
[2018-01-12 18:21:41.173] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:21:41.223] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:21:41.223] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:21:41.223] (Initialize P2                    :   4) @Stop
[2018-01-12 18:21:41.483] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:21:41.683] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:21:41.703] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:21:41.703] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:21:41.703] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:21:41.703] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:21:41.703] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:41.703] (PreFillP1                        :   6) @Run
[2018-01-12 18:21:41.703] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:21:41.753] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:21:41.753] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:21:41.753] (PreFillP2                        :   7) @Run
[2018-01-12 18:21:41.753] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:21:41.853] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:42.123] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:42.173] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:42.173] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:42.483] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:42.533] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:42.533] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:42.783] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:42.833] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:42.833] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:42.983] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:43.033] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:43.033] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:43.203] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:43.253] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:43.253] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:43.543] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:43.593] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:43.593] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:43.843] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:43.893] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:21:43.893] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:43.943] (PreFillP1                        :   6) @Stop
[2018-01-12 18:21:44.043] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:44.093] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:44.093] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:44.263] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:44.313] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:44.313] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:44.503] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:44.553] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:44.553] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:44.703] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:44.753] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:44.753] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:44.853] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:44.903] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:44.903] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:45.053] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:45.103] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:45.103] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:45.313] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:45.363] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:21:45.363] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:21:45.363] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:21:45.403] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:21:45.413] (PreFillP2                        :   7) @Stop
[2018-01-12 18:21:45.453] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:21:45.453] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:21:45.453] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:21:45.473] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:45.523] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:21:45.543] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:21:45.793] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:21:45.793] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:45.793] (Flush Capillary                  :   9) @Run
[2018-01-12 18:21:45.793] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:21:45.843] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:21:45.843] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:21:45.843] (Flush Singulator                 :  10) @Run
[2018-01-12 18:21:45.843] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:21:45.943] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:46.193] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:46.243] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:46.243] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:46.393] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:46.443] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:46.443] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:46.613] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:46.663] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:46.663] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:46.953] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:47.003] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:47.003] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:47.253] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:47.303] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:47.303] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:47.453] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:47.503] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:47.503] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:47.673] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:47.723] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:47.723] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:48.013] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:48.063] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:21:48.063] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:48.113] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:21:48.213] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:21:48.313] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:48.363] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:21:48.363] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:21:48.363] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:21:48.403] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:21:48.423] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:21:48.423] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:21:48.423] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:21:48.463] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:48.513] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:21:48.623] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:21:48.873] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:21:48.873] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:48.873] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:21:48.873] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:21:48.923] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:21:48.923] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:21:48.923] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:21:48.923] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:21:49.023] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:49.293] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:49.343] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:49.343] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:49.653] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:49.703] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:49.703] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:49.953] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:50.003] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:50.003] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:50.153] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:50.203] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:50.203] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:50.373] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:50.423] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:50.423] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:50.473] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:21:50.713] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:50.763] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:21:50.763] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:50.813] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:21:50.913] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:50.963] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:21:50.963] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:21:50.963] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:21:50.973] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:21:50.973] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:21:50.973] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:21:50.973] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:21:50.973] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:21:50.973] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:21:50.973] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:50.973] (PreFillP1                        :   6) @Run
[2018-01-12 18:21:50.973] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:21:51.023] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:21:51.023] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:21:51.023] (PreFillP2                        :   7) @Run
[2018-01-12 18:21:51.023] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:21:51.123] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:51.423] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:51.473] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:51.473] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:51.763] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:51.813] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:51.813] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:51.963] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:52.013] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:52.013] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:52.163] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:52.213] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:52.213] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:52.383] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:52.433] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:52.433] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:52.723] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:52.773] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:52.773] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:53.023] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:53.073] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:21:53.073] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:53.223] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:53.273] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:21:53.273] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:53.323] (PreFillP1                        :   6) @Stop
[2018-01-12 18:21:53.443] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:53.493] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:53.493] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:53.783] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:53.833] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:53.833] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:53.983] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:54.033] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:54.033] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:54.133] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:54.183] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:54.183] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:54.333] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:54.383] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:21:54.383] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:54.593] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:21:54.643] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:21:54.643] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:21:54.643] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:21:54.673] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:21:54.693] (PreFillP2                        :   7) @Stop
[2018-01-12 18:21:54.733] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:21:54.733] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:21:54.733] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:21:54.753] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:54.803] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:21:54.823] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:21:55.073] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:21:55.073] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:55.073] (Flush Capillary                  :   9) @Run
[2018-01-12 18:21:55.073] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:21:55.123] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:21:55.123] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:21:55.123] (Flush Singulator                 :  10) @Run
[2018-01-12 18:21:55.123] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:21:55.223] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:55.473] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:55.523] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:55.523] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:55.673] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:55.723] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:55.723] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:55.893] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:55.943] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:55.943] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:56.233] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:56.283] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:56.283] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:56.533] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:56.583] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:56.583] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:56.733] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:56.783] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:56.783] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:56.953] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:57.003] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:57.003] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:57.293] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:57.343] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:21:57.343] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:21:57.393] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:21:57.493] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:21:57.593] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:21:57.643] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:21:57.643] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:21:57.643] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:21:57.683] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:21:57.703] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:21:57.703] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:21:57.703] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:21:57.743] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:57.793] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:21:57.903] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:21:58.153] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:21:58.153] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:58.153] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:21:58.153] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:21:58.203] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:21:58.203] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:21:58.203] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:21:58.203] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:21:58.303] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:58.573] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:58.623] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:58.623] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:58.933] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:58.983] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:58.983] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:59.233] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:59.283] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:59.283] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:59.433] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:59.483] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:59.483] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:59.653] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:21:59.703] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:21:59.703] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:21:59.753] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:21:59.993] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:22:00.043] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:22:00.043] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:00.093] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:22:00.193] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:22:00.243] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:22:00.243] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:22:00.243] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:22:00.253] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:22:00.253] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:22:00.253] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:22:00.253] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:22:00.253] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:22:00.253] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:22:00.253] (Prefill before Flush             :  14) @Run
[2018-01-12 18:22:00.253] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:22:00.253] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:22:00.253] (PreFillP1                        :  15) @Run
[2018-01-12 18:22:00.253] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:22:00.303] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:22:00.303] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:22:00.303] (PreFillP2                        :  16) @Run
[2018-01-12 18:22:00.303] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:22:00.403] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:22:00.693] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:22:00.743] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:00.743] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:22:00.933] (PreFillP1                        :  15) @Stop
[2018-01-12 18:22:01.033] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:22:01.083] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:22:01.083] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:01.133] (PreFillP2                        :  16) @Stop
[2018-01-12 18:22:01.233] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:22:01.283] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:22:01.283] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:22:01.283] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:22:01.303] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:22:01.323] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:22:01.323] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:21:10.093] (Detector                         :   2) @Stop
[2018-01-12 18:22:01.833] ** STARTING F02 MAIN ROUTINE **
[2018-01-12 18:22:01.833] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:22:01.833] (Main Well                        :   0) @Run
[2018-01-12 18:22:01.833] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:22:01.833] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:22:01.833] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:22:01.833] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:22:01.833] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:22:01.833] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:22:01.833] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:22:01.833] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:22:01.833] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:22:01.833] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:22:02.343] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:22:02.343] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:22:02.383] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:22:02.503] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:22:02.503] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:22:02.503] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:22:02.503] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:22:02.503] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:22:02.503] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:22:02.503] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:22:02.503] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:22:02.503] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:22:02.503] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:22:02.523] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:22:02.573] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:22:02.593] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:22:02.843] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:22:02.843] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:22:02.843] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:22:02.843] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:22:02.893] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:22:02.893] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:22:02.893] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:22:02.893] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:22:02.993] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:22:03.263] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:22:03.313] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:22:03.313] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:22:03.623] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:22:03.673] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:22:03.673] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:22:03.923] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:22:03.973] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:22:03.973] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:22:04.123] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:22:04.173] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:22:04.173] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:22:04.223] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:22:04.343] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:22:04.393] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:22:04.393] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:04.443] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:22:04.683] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:22:04.733] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:22:04.733] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:22:04.733] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:22:04.733] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:22:04.733] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:22:04.793] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:22:04.843] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:22:04.903] (Main Well                        :   0) Move to Well 62 with z-offset of 2540 um (Wait)
[2018-01-12 18:22:07.823] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:22:08.063] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:22:08.113] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:22:08.113] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:08.213] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:22:08.263] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:22:08.263] (Main Well                        :   0) Stop Pump
[2018-01-12 18:22:08.303] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:22:08.363] (Main Well                        :   0) Move to Well 62 with z-offset of 310 um (Wait)
[2018-01-12 18:22:17.543] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:17.783] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:22:17.833] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:22:17.833] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:22:17.833] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:22:17.833] (Pickup Sample                    :  21) @Run
[2018-01-12 18:22:17.833] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:22:22.503] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:22:25.123] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:22:25.203] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:22:25.403] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:25.503] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:25.553] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:25.553] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:25.653] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:25.703] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:25.703] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:25.803] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:25.853] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:25.853] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:25.963] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:26.013] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:26.013] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:26.203] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:26.253] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:26.253] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:26.353] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:26.403] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:26.403] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:26.503] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:26.553] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:26.553] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:26.653] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:26.703] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:26.703] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:26.913] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:26.963] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:26.963] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:27.063] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:27.113] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:27.113] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:27.213] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:27.263] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:27.263] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:27.363] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:27.413] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:27.413] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:27.623] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:27.673] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:27.673] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:27.773] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:27.823] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:27.823] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:27.923] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:27.973] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:27.973] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:28.073] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:28.123] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:28.123] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:28.333] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:28.383] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:28.383] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:28.483] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:28.533] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:28.533] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:28.633] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:28.683] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:28.683] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:28.783] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:28.833] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:28.833] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:29.043] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:29.093] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:29.093] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:29.193] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:29.243] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:29.243] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:29.343] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:29.393] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:29.393] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:29.493] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:29.543] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:29.543] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:29.753] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:29.803] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:29.803] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:29.903] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:29.953] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:29.953] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:30.053] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:30.103] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:30.103] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:30.203] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:30.253] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:30.253] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:30.463] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:30.513] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:30.513] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:30.613] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:30.663] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:30.663] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:30.763] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:30.813] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:30.813] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:30.913] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:30.963] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:30.963] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:31.173] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:31.223] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:31.223] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:31.323] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:31.373] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:31.373] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:31.473] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:31.523] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:31.523] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:31.623] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:31.673] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:31.673] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:31.883] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:31.933] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:31.933] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:32.033] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:32.083] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:32.083] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:32.183] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:32.233] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:32.233] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:32.333] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:32.383] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:32.383] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:32.593] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:32.643] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:32.643] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:32.743] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:32.793] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:32.793] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:32.893] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:32.943] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:32.943] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:33.043] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:33.093] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:33.093] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:33.303] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:33.353] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:33.353] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:33.453] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:33.503] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:33.503] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:33.603] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:33.653] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:33.653] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:33.753] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:33.803] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:33.803] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:34.013] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:34.063] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:34.063] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:34.163] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:34.213] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:34.213] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:34.313] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:34.363] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:34.363] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:34.463] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:34.513] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:22:34.513] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:22:34.723] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:34.773] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:22:34.773] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:22:34.873] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:22:34.923] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:22:34.923] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:22:34.923] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:22:35.233] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:22:35.303] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:22:35.553] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:22:35.573] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:22:35.623] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:22:35.623] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:22:35.623] (Singulate Sample                 :  22) @Run
[2018-01-12 18:22:35.623] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:22:35.623] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:22:35.623] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:22:35.683] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:22:35.733] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:22:35.793] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:22:35.893] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_F02_RAW.qlb"
[2018-01-12 18:22:35.993] (Detector                         :   2) @Run
[2018-01-12 18:22:35.993] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:23:15.895] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:23:16.755] (Detector                         :   2) @Stop
[2018-01-12 18:23:16.895] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:23:16.895] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:17.025] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:23:17.075] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:23:17.075] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:17.175] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:23:17.225] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:23:17.225] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:23:17.225] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:23:17.425] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:23:17.425] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:23:17.425] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:23:17.425] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:23:17.425] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:23:17.425] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:23:17.425] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:17.425] (PreFillP1                        :  24) @Run
[2018-01-12 18:23:17.425] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:23:17.475] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:23:17.475] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:23:17.475] (PreFillP2                        :  25) @Run
[2018-01-12 18:23:17.475] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:23:17.575] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:17.905] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:17.955] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:17.955] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:18.105] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:18.155] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:18.155] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:18.325] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:18.375] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:18.375] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:18.665] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:18.715] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:18.715] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:18.965] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:19.015] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:19.015] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:19.165] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:19.215] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:19.215] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:19.385] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:19.435] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:19.435] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:19.725] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:19.775] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:19.775] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:20.025] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:20.075] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:20.075] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:20.225] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:20.275] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:20.275] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:20.445] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:20.495] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:23:20.495] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:20.785] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:20.835] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:23:20.835] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:20.885] (PreFillP1                        :  24) @Stop
[2018-01-12 18:23:21.085] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:21.135] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:23:21.135] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:21.235] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:21.285] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:23:21.285] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:21.335] (PreFillP2                        :  25) @Stop
[2018-01-12 18:23:21.455] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:23:21.505] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:23:21.505] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:23:21.505] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:23:21.525] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:23:21.525] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:23:21.525] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:23:21.615] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:23:21.665] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:23:21.685] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:23:21.935] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:23:21.935] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:23:21.935] (Flush Capillary                  :  27) @Run
[2018-01-12 18:23:21.935] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:23:21.985] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:23:21.985] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:23:21.985] (Flush Singulator                 :  28) @Run
[2018-01-12 18:23:21.985] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:23:22.085] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:22.355] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:23:22.405] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:22.405] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:22.715] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:23:22.765] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:22.765] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:23.015] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:23:23.065] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:23.065] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:23.215] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:23:23.265] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:23.265] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:23.315] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:23:23.435] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:23:23.485] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:23:23.485] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:23.535] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:23:23.775] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:23:23.825] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:23:23.825] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:23:23.825] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:23:23.825] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:23:23.845] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:23:23.845] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:23:23.845] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:23:23.865] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:23:23.915] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:23:23.935] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:23:24.185] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:23:24.185] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:23:24.185] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:23:24.185] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:23:24.235] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:23:24.235] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:23:24.235] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:23:24.235] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:23:24.335] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:24.655] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:23:24.705] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:24.705] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:24.855] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:23:24.905] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:24.905] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:25.075] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:23:25.125] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:25.125] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:25.175] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:23:25.415] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:23:25.465] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:23:25.465] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:25.515] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:23:25.615] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:23:25.665] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:23:25.665] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:23:25.665] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:23:25.695] (Main Well                        :   0) Stop Pump
[2018-01-12 18:23:25.735] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:23:25.735] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:23:25.735] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:23:25.755] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:23:25.805] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:23:25.825] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:23:26.075] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:23:26.075] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:23:26.075] (Flush Capillary                  :  33) @Run
[2018-01-12 18:23:26.075] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:23:26.125] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:23:26.125] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:23:26.125] (Flush Singulator                 :  34) @Run
[2018-01-12 18:23:26.125] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:23:26.225] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:26.495] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:23:26.545] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:26.545] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:26.855] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:23:26.905] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:23:26.905] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:26.955] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:23:27.055] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:23:27.155] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:23:27.205] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:23:27.205] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:23:27.205] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:23:27.235] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:23:27.255] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:23:27.255] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:23:27.255] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:23:27.295] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:23:27.345] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:23:27.455] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:23:27.705] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:23:27.705] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:23:27.705] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:23:27.705] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:23:27.755] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:23:27.755] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:23:27.755] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:23:27.755] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:23:27.855] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:28.125] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:23:28.175] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:28.175] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:28.485] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:23:28.535] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:23:28.535] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:28.585] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:23:28.685] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:23:28.785] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:23:28.835] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:23:28.835] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:23:28.835] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:23:28.855] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:23:28.875] (Main Well                        :   0) Stop routine
[2018-01-12 18:23:28.875] (Main Well                        :   0) @Stop
[2018-01-12 18:23:29.135] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:23:29.135] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:23:29.135] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:23:29.135] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:23:29.135] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:23:29.135] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:23:31.135] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:23:31.135] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:23:31.135] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:23:31.135] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:23:31.175] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:23:31.175] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:23:16.755] (Detector                         :  17) @Stop
[2018-01-12 18:23:36.345] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:23:36.345] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:23:36.345] (MainPre Routine                  :   0) @Run
[2018-01-12 18:23:36.345] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:23:42.435] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:23:42.435] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:23:42.435] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:23:43.075] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:23:43.075] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:23:43.085] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:23:44.815] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:23:44.815] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:23:44.815] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:23:44.975] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:23:45.025] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:23:45.045] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:23:45.295] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:23:45.295] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:23:45.295] (Initialize P1                    :   3) @Run
[2018-01-12 18:23:45.295] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:23:45.345] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:23:45.345] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:23:45.345] (Initialize P2                    :   4) @Run
[2018-01-12 18:23:45.345] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:23:45.525] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:45.755] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:45.875] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:23:45.925] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:45.925] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:45.975] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:23:46.025] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:46.025] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:46.215] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:23:46.265] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:46.265] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:46.315] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:23:46.365] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:46.365] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:46.415] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:23:46.465] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:46.465] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:46.515] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:23:46.565] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:46.565] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:46.615] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:23:46.665] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:46.665] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:46.715] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:23:46.765] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:46.765] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:46.835] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:23:46.885] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:46.885] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:47.075] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:23:47.125] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:47.125] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:47.175] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:23:47.225] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:47.225] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:47.275] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:23:47.325] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:47.325] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:47.375] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:23:47.425] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:47.425] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:47.475] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:23:47.525] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:47.525] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:47.575] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:23:47.625] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:47.625] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:47.695] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:23:47.745] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:47.745] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:47.935] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:23:47.985] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:47.985] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:48.035] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:23:48.085] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:23:48.085] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:48.135] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:23:48.185] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:23:48.185] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:23:48.185] (Initialize P1                    :   3) @Stop
[2018-01-12 18:23:48.235] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:23:48.285] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:23:48.285] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:23:48.285] (Initialize P2                    :   4) @Stop
[2018-01-12 18:23:48.545] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:23:48.745] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:23:48.765] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:23:48.765] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:23:48.765] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:23:48.765] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:23:48.765] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:48.765] (PreFillP1                        :   6) @Run
[2018-01-12 18:23:48.765] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:23:48.815] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:23:48.815] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:23:48.815] (PreFillP2                        :   7) @Run
[2018-01-12 18:23:48.815] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:23:48.915] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:49.185] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:49.235] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:49.235] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:49.545] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:49.595] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:49.595] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:49.845] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:49.895] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:49.895] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:50.045] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:50.095] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:50.095] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:50.265] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:50.315] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:50.315] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:50.605] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:50.655] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:50.655] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:50.905] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:50.955] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:23:50.955] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:51.005] (PreFillP1                        :   6) @Stop
[2018-01-12 18:23:51.105] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:51.155] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:23:51.155] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:51.325] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:51.375] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:23:51.375] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:51.565] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:51.615] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:23:51.615] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:51.765] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:51.815] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:23:51.815] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:51.915] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:51.965] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:23:51.965] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:52.115] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:52.165] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:23:52.165] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:52.375] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:52.425] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:23:52.425] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:23:52.425] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:23:52.465] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:23:52.475] (PreFillP2                        :   7) @Stop
[2018-01-12 18:23:52.515] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:23:52.515] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:23:52.515] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:23:52.535] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:23:52.585] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:23:52.605] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:23:52.855] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:23:52.855] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:23:52.855] (Flush Capillary                  :   9) @Run
[2018-01-12 18:23:52.855] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:23:52.905] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:23:52.905] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:23:52.905] (Flush Singulator                 :  10) @Run
[2018-01-12 18:23:52.905] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:23:53.005] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:53.255] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:23:53.305] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:53.305] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:53.455] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:23:53.505] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:53.505] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:53.675] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:23:53.725] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:53.725] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:54.015] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:23:54.065] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:54.065] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:54.315] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:23:54.365] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:54.365] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:54.515] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:23:54.565] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:54.565] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:54.735] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:23:54.785] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:54.785] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:55.075] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:23:55.125] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:23:55.125] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:55.175] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:23:55.275] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:23:55.375] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:23:55.425] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:23:55.425] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:23:55.425] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:23:55.465] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:23:55.485] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:23:55.485] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:23:55.485] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:23:55.525] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:23:55.575] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:23:55.685] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:23:55.935] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:23:55.935] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:23:55.935] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:23:55.935] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:23:55.985] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:23:55.985] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:23:55.985] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:23:55.985] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:23:56.085] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:56.355] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:23:56.405] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:56.405] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:56.715] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:23:56.765] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:56.765] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:57.015] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:23:57.065] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:57.065] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:57.215] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:23:57.265] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:23:57.265] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:57.575] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:23:57.625] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:23:57.625] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:23:57.675] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:23:57.775] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:23:57.875] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:23:57.925] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:23:57.925] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:23:57.925] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:23:57.935] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:23:57.935] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:23:57.935] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:23:57.935] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:23:57.935] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:23:57.935] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:23:57.935] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:57.935] (PreFillP1                        :   6) @Run
[2018-01-12 18:23:57.935] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:23:57.985] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:23:57.985] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:23:57.985] (PreFillP2                        :   7) @Run
[2018-01-12 18:23:57.985] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:23:58.085] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:58.515] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:58.565] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:58.565] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:58.715] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:58.765] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:58.765] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:58.915] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:58.965] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:58.965] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:59.135] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:59.185] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:59.185] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:59.475] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:59.525] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:59.525] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:59.775] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:23:59.825] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:23:59.825] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:23:59.975] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:24:00.025] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:00.025] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:00.195] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:24:00.245] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:24:00.245] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:00.295] (PreFillP1                        :   6) @Stop
[2018-01-12 18:24:00.535] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:24:00.585] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:24:00.585] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:00.735] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:24:00.785] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:24:00.785] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:00.885] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:24:00.935] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:24:00.935] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:01.085] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:24:01.135] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:24:01.135] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:01.345] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:24:01.395] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:24:01.395] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:01.545] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:24:01.595] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:24:01.595] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:01.695] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:24:01.745] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:24:01.745] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:24:01.745] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:24:01.785] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:24:01.795] (PreFillP2                        :   7) @Stop
[2018-01-12 18:24:01.855] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:24:01.855] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:24:01.855] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:24:02.015] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:24:02.065] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:24:02.085] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:24:02.335] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:24:02.335] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:24:02.335] (Flush Capillary                  :   9) @Run
[2018-01-12 18:24:02.335] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:24:02.385] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:24:02.385] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:24:02.385] (Flush Singulator                 :  10) @Run
[2018-01-12 18:24:02.385] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:24:02.485] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:02.755] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:24:02.805] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:24:02.805] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:03.115] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:24:03.165] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:24:03.165] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:03.425] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:24:03.477] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:24:03.477] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:03.627] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:24:03.677] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:24:03.677] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:03.987] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:24:04.037] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:24:04.037] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:04.287] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:24:04.337] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:24:04.337] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:04.387] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:24:04.487] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:24:04.537] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:24:04.537] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:04.587] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:24:04.707] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:24:04.757] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:24:04.757] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:24:04.757] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:24:04.807] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:24:04.867] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:24:04.867] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:24:04.867] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:24:04.887] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:24:04.937] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:24:04.957] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:24:05.207] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:24:05.207] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:24:05.207] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:24:05.207] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:24:05.257] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:24:05.257] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:24:05.257] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:24:05.257] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:24:05.357] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:05.647] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:24:05.697] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:24:05.697] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:05.987] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:24:06.037] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:24:06.037] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:06.187] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:24:06.237] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:24:06.237] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:06.387] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:24:06.437] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:24:06.437] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:06.607] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:24:06.657] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:24:06.657] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:06.707] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:24:06.947] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:24:06.997] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:24:06.997] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:07.047] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:24:07.147] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:24:07.197] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:24:07.197] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:24:07.197] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:24:07.217] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:24:07.217] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:24:07.217] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:24:07.217] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:24:07.217] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:24:07.217] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:24:07.217] (Prefill before Flush             :  14) @Run
[2018-01-12 18:24:07.217] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:24:07.217] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:24:07.217] (PreFillP1                        :  15) @Run
[2018-01-12 18:24:07.217] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:24:07.267] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:24:07.267] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:24:07.267] (PreFillP2                        :  16) @Run
[2018-01-12 18:24:07.267] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:24:07.367] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:07.657] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:24:07.707] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:07.707] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:07.897] (PreFillP1                        :  15) @Stop
[2018-01-12 18:24:07.997] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:24:08.047] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:24:08.047] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:08.097] (PreFillP2                        :  16) @Stop
[2018-01-12 18:24:08.197] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:24:08.247] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:24:08.247] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:24:08.247] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:24:08.267] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:24:08.287] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:24:08.287] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:23:16.755] (Detector                         :   2) @Stop
[2018-01-12 18:24:08.417] ** STARTING G02 MAIN ROUTINE **
[2018-01-12 18:24:08.417] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:24:08.417] (Main Well                        :   0) @Run
[2018-01-12 18:24:08.417] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:24:08.427] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:24:08.427] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:24:08.427] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:24:08.427] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:24:08.427] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:24:08.427] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:24:08.427] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:24:08.427] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:24:08.427] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:24:08.957] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:24:08.957] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:24:08.977] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:24:08.977] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:24:09.127] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:24:09.127] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:24:09.127] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:24:09.127] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:24:09.127] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:24:09.127] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:24:09.127] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:24:09.127] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:24:09.127] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:24:09.147] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:24:09.197] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:24:09.217] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:24:09.467] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:24:09.467] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:24:09.467] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:24:09.467] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:24:09.517] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:24:09.517] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:24:09.517] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:24:09.517] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:24:09.617] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:09.887] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:24:09.937] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:24:09.937] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:10.247] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:24:10.297] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:24:10.297] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:10.547] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:24:10.597] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:24:10.597] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:10.747] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:24:10.797] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:24:10.797] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:10.847] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:24:10.967] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:24:11.017] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:24:11.017] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:11.067] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:24:11.307] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:24:11.357] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:24:11.357] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:24:11.357] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:24:11.357] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:24:11.357] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:24:11.417] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:24:11.467] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:24:11.527] (Main Well                        :   0) Move to Well 74 with z-offset of 2540 um (Wait)
[2018-01-12 18:24:14.507] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:14.747] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:24:14.797] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:24:14.797] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:14.897] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:24:14.947] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:24:14.947] (Main Well                        :   0) Stop Pump
[2018-01-12 18:24:14.987] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:24:15.047] (Main Well                        :   0) Move to Well 74 with z-offset of 310 um (Wait)
[2018-01-12 18:24:25.377] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:25.617] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:24:25.667] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:24:25.667] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:24:25.667] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:24:25.667] (Pickup Sample                    :  21) @Run
[2018-01-12 18:24:25.667] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:24:30.347] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:24:33.147] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:24:33.227] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:24:33.427] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:33.527] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:33.577] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:33.577] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:33.677] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:33.727] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:33.727] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:33.827] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:33.877] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:33.877] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:33.987] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:34.037] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:34.037] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:34.227] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:34.277] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:34.277] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:34.377] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:34.427] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:34.427] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:34.527] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:34.577] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:34.577] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:34.677] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:34.727] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:34.727] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:34.937] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:34.987] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:34.987] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:35.087] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:35.137] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:35.137] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:35.237] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:35.287] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:35.287] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:35.387] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:35.437] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:35.437] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:35.647] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:35.697] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:35.697] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:35.797] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:35.847] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:35.847] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:35.947] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:35.997] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:35.997] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:36.097] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:36.147] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:36.147] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:36.357] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:36.407] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:36.407] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:36.507] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:36.557] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:36.557] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:36.657] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:36.707] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:36.707] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:36.807] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:36.857] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:36.857] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:37.067] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:37.117] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:37.117] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:37.217] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:37.267] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:37.267] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:37.367] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:37.417] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:37.417] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:37.517] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:37.567] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:37.567] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:37.777] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:37.827] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:37.827] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:37.927] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:37.977] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:37.977] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:38.077] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:38.127] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:38.127] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:38.227] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:38.277] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:38.277] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:38.487] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:38.537] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:38.537] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:38.637] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:38.687] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:38.687] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:38.787] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:38.837] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:38.837] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:38.937] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:38.987] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:38.987] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:39.197] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:39.247] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:39.247] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:39.347] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:39.397] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:39.397] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:39.497] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:39.547] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:39.547] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:39.647] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:39.697] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:39.697] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:39.907] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:39.957] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:39.957] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:40.057] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:40.107] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:40.107] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:40.207] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:40.257] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:40.257] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:40.357] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:40.407] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:40.407] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:40.617] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:40.667] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:40.667] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:40.767] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:40.817] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:40.817] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:40.917] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:40.967] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:40.967] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:41.067] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:41.117] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:41.117] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:41.327] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:41.377] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:41.377] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:41.477] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:41.527] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:41.527] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:41.627] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:41.677] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:41.677] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:41.777] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:41.827] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:41.827] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:42.037] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:42.087] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:42.087] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:42.187] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:42.237] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:42.237] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:42.337] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:42.387] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:42.387] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:42.487] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:42.537] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:24:42.537] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:24:42.747] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:42.797] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:24:42.797] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:24:42.897] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:24:42.947] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:24:42.947] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:24:42.947] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:24:43.267] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:24:43.327] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:24:43.577] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:24:43.597] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:24:43.647] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:24:43.647] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:24:43.647] (Singulate Sample                 :  22) @Run
[2018-01-12 18:24:43.647] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:24:43.647] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:24:43.647] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:24:43.707] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:24:43.757] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:24:43.817] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:24:43.917] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_G02_RAW.qlb"
[2018-01-12 18:24:44.027] (Detector                         :   2) @Run
[2018-01-12 18:24:44.027] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:25:23.927] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:25:24.817] (Detector                         :   2) @Stop
[2018-01-12 18:25:24.927] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:25:24.927] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:25.047] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:25:25.097] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:25:25.097] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:25.197] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:25:25.247] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:25:25.247] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:25:25.247] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:25:25.647] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:25:25.647] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:25:25.647] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:25:25.647] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:25:25.647] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:25:25.647] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:25:25.647] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:25.647] (PreFillP1                        :  24) @Run
[2018-01-12 18:25:25.647] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:25:25.697] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:25:25.697] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:25:25.697] (PreFillP2                        :  25) @Run
[2018-01-12 18:25:25.697] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:25:25.797] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:26.067] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:26.117] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:26.117] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:26.287] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:26.337] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:26.337] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:26.627] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:26.677] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:26.677] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:26.927] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:26.977] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:26.977] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:27.127] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:27.177] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:27.177] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:27.347] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:27.397] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:27.397] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:27.687] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:27.737] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:27.737] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:27.987] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:28.037] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:28.037] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:28.187] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:28.237] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:28.237] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:28.407] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:28.457] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:28.457] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:28.747] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:28.797] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:25:28.797] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:28.847] (PreFillP1                        :  24) @Stop
[2018-01-12 18:25:29.047] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:29.097] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:25:29.097] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:29.197] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:29.247] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:25:29.247] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:29.417] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:25:29.467] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:25:29.467] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:25:29.467] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:25:29.497] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:25:29.497] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:25:29.497] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:25:29.657] (PreFillP2                        :  25) @Stop
[2018-01-12 18:25:29.677] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:25:29.727] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:25:29.747] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:25:29.997] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:25:29.997] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:25:29.997] (Flush Capillary                  :  27) @Run
[2018-01-12 18:25:29.997] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:25:30.047] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:25:30.047] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:25:30.047] (Flush Singulator                 :  28) @Run
[2018-01-12 18:25:30.047] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:25:30.147] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:30.577] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:25:30.627] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:25:30.627] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:30.877] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:25:30.927] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:25:30.927] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:31.077] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:25:31.127] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:25:31.127] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:31.307] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:25:31.357] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:25:31.357] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:31.407] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:25:31.647] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:25:31.697] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:25:31.697] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:31.747] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:25:31.847] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:25:31.897] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:25:31.897] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:25:31.897] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:25:31.947] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:25:31.967] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:25:31.967] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:25:31.967] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:25:31.987] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:25:32.037] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:25:32.057] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:25:32.307] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:25:32.307] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:25:32.307] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:25:32.307] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:25:32.357] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:25:32.357] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:25:32.357] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:25:32.357] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:25:32.457] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:32.727] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:25:32.777] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:25:32.777] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:33.087] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:25:33.137] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:25:33.137] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:33.187] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:25:33.287] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:25:33.387] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:25:33.437] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:25:33.437] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:25:33.437] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:25:33.467] (Main Well                        :   0) Stop Pump
[2018-01-12 18:25:33.507] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:25:33.507] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:25:33.507] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:25:33.547] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:25:33.597] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:25:33.707] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:25:33.957] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:25:33.957] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:25:33.957] (Flush Capillary                  :  33) @Run
[2018-01-12 18:25:33.957] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:25:34.007] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:25:34.007] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:25:34.007] (Flush Singulator                 :  34) @Run
[2018-01-12 18:25:34.007] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:25:34.107] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:34.377] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:25:34.427] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:25:34.427] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:34.737] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:25:34.787] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:25:34.787] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:34.837] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:25:34.937] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:25:35.037] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:25:35.087] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:25:35.087] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:25:35.087] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:25:35.107] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:25:35.137] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:25:35.137] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:25:35.137] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:25:35.177] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:25:35.227] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:25:35.337] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:25:35.587] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:25:35.587] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:25:35.587] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:25:35.587] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:25:35.637] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:25:35.637] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:25:35.637] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:25:35.637] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:25:35.737] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:36.007] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:25:36.057] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:25:36.057] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:36.367] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:25:36.417] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:25:36.417] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:36.467] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:25:36.567] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:25:36.667] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:25:36.717] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:25:36.717] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:25:36.717] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:25:36.737] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:25:36.757] (Main Well                        :   0) Stop routine
[2018-01-12 18:25:36.757] (Main Well                        :   0) @Stop
[2018-01-12 18:25:36.997] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:25:36.997] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:25:36.997] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:25:36.997] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:25:36.997] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:25:36.997] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:25:38.997] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:25:38.997] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:25:38.997] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:25:38.997] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:25:39.037] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:25:39.037] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:25:24.817] (Detector                         :  17) @Stop
[2018-01-12 18:25:45.697] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:25:45.697] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:25:45.697] (MainPre Routine                  :   0) @Run
[2018-01-12 18:25:45.697] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:25:51.617] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:25:51.617] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:25:51.617] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:25:52.257] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:25:52.257] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:25:52.267] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:25:53.997] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:25:53.997] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:25:53.997] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:25:54.157] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:25:54.207] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:25:54.227] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:25:54.477] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:25:54.477] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:25:54.477] (Initialize P1                    :   3) @Run
[2018-01-12 18:25:54.477] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:25:54.527] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:25:54.527] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:25:54.527] (Initialize P2                    :   4) @Run
[2018-01-12 18:25:54.527] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:25:54.707] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:54.937] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:55.057] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:25:55.107] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:55.107] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:55.157] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:25:55.207] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:55.207] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:55.397] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:25:55.447] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:55.447] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:55.497] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:25:55.547] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:55.547] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:55.597] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:25:55.647] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:55.647] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:55.697] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:25:55.747] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:55.747] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:55.797] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:25:55.847] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:55.847] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:55.897] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:25:55.947] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:55.947] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:56.017] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:25:56.067] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:56.067] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:56.257] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:25:56.307] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:56.307] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:56.357] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:25:56.407] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:56.407] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:56.457] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:25:56.507] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:56.507] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:56.557] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:25:56.607] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:56.607] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:56.657] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:25:56.707] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:56.707] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:56.757] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:25:56.807] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:56.807] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:56.877] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:25:56.927] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:56.927] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:57.117] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:25:57.167] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:57.167] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:57.217] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:25:57.267] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:25:57.267] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:25:57.317] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:25:57.367] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:25:57.367] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:25:57.367] (Initialize P1                    :   3) @Stop
[2018-01-12 18:25:57.417] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:25:57.467] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:25:57.467] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:25:57.467] (Initialize P2                    :   4) @Stop
[2018-01-12 18:25:57.727] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:25:57.927] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:25:57.947] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:25:57.947] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:25:57.947] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:25:57.947] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:25:57.947] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:25:57.947] (PreFillP1                        :   6) @Run
[2018-01-12 18:25:57.947] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:25:57.997] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:25:57.997] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:25:57.997] (PreFillP2                        :   7) @Run
[2018-01-12 18:25:57.997] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:25:58.097] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:58.367] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:25:58.417] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:58.417] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:58.727] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:25:58.777] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:58.777] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:59.027] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:25:59.077] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:59.077] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:59.227] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:25:59.277] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:59.277] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:59.447] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:25:59.497] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:59.497] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:25:59.787] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:25:59.837] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:25:59.837] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:00.087] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:00.137] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:26:00.137] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:00.187] (PreFillP1                        :   6) @Stop
[2018-01-12 18:26:00.287] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:00.337] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:26:00.337] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:00.507] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:00.557] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:26:00.557] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:00.747] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:00.797] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:26:00.797] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:00.947] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:00.997] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:26:00.997] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:01.097] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:01.147] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:26:01.147] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:01.297] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:01.347] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:26:01.347] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:01.557] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:01.607] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:26:01.607] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:26:01.607] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:26:01.647] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:26:01.657] (PreFillP2                        :   7) @Stop
[2018-01-12 18:26:01.697] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:26:01.697] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:26:01.697] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:26:01.717] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:01.767] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:26:01.787] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:26:02.037] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:26:02.037] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:02.037] (Flush Capillary                  :   9) @Run
[2018-01-12 18:26:02.037] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:26:02.087] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:26:02.087] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:26:02.087] (Flush Singulator                 :  10) @Run
[2018-01-12 18:26:02.087] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:26:02.187] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:02.437] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:02.487] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:02.487] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:02.637] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:02.687] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:02.687] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:02.857] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:02.907] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:02.907] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:03.207] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:03.257] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:03.257] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:03.507] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:03.557] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:03.557] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:03.707] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:03.757] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:03.757] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:04.067] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:04.117] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:04.117] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:04.167] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:26:04.267] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:26:04.367] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:04.417] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:26:04.417] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:04.517] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:04.567] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:26:04.567] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:26:04.567] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:26:04.597] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:26:04.697] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:26:04.697] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:26:04.697] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:26:04.717] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:04.767] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:26:04.787] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:26:05.037] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:26:05.037] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:05.037] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:26:05.037] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:26:05.087] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:26:05.087] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:26:05.087] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:26:05.087] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:26:05.187] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:05.477] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:05.527] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:05.527] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:05.817] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:05.867] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:05.867] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:06.017] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:06.067] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:06.067] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:06.217] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:06.267] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:06.267] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:06.437] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:06.487] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:06.487] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:06.537] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:26:06.777] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:06.827] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:26:06.827] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:06.877] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:26:06.977] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:07.027] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:26:07.027] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:26:07.027] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:26:07.047] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:26:07.047] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:26:07.047] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:26:07.047] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:26:07.047] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:26:07.047] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:26:07.047] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:07.047] (PreFillP1                        :   6) @Run
[2018-01-12 18:26:07.047] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:26:07.097] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:26:07.097] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:26:07.097] (PreFillP2                        :   7) @Run
[2018-01-12 18:26:07.097] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:26:07.197] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:07.497] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:07.547] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:07.547] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:07.837] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:07.887] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:07.887] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:08.037] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:08.087] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:08.087] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:08.237] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:08.287] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:08.287] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:08.457] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:08.507] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:08.507] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:08.797] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:08.847] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:08.847] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:09.097] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:09.147] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:09.147] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:09.297] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:09.347] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:26:09.347] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:09.397] (PreFillP1                        :   6) @Stop
[2018-01-12 18:26:09.517] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:09.567] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:26:09.567] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:09.857] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:09.907] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:26:09.907] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:10.057] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:10.107] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:26:10.107] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:10.207] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:10.257] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:26:10.257] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:10.407] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:10.457] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:26:10.457] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:10.667] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:26:10.717] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:26:10.717] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:26:10.717] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:26:10.747] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:26:10.767] (PreFillP2                        :   7) @Stop
[2018-01-12 18:26:10.807] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:26:10.807] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:26:10.807] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:26:10.827] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:10.877] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:26:10.897] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:26:11.147] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:26:11.147] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:11.147] (Flush Capillary                  :   9) @Run
[2018-01-12 18:26:11.147] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:26:11.197] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:26:11.197] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:26:11.197] (Flush Singulator                 :  10) @Run
[2018-01-12 18:26:11.197] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:26:11.297] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:11.457] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:11.507] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:11.507] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:11.757] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:11.807] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:11.807] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:12.117] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:12.167] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:12.167] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:12.417] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:12.467] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:12.467] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:12.617] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:12.667] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:12.667] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:12.837] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:12.887] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:12.887] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:13.177] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:13.227] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:13.227] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:13.277] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:26:13.377] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:26:13.477] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:13.527] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:26:13.527] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:13.627] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:26:13.677] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:26:13.677] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:26:13.677] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:26:13.707] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:26:13.807] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:26:13.807] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:26:13.807] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:26:13.827] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:13.877] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:26:13.897] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:26:14.147] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:26:14.147] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:14.147] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:26:14.147] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:26:14.197] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:26:14.197] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:26:14.197] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:26:14.197] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:26:14.297] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:14.587] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:14.637] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:14.637] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:14.927] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:14.977] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:14.977] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:15.127] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:15.177] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:15.177] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:15.327] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:15.377] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:15.377] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:15.547] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:15.597] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:26:15.597] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:15.647] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:26:15.887] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:15.937] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:26:15.937] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:15.987] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:26:16.087] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:26:16.137] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:26:16.137] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:26:16.137] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:26:16.157] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:26:16.157] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:26:16.157] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:26:16.157] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:26:16.157] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:26:16.157] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:26:16.157] (Prefill before Flush             :  14) @Run
[2018-01-12 18:26:16.157] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:26:16.157] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:26:16.157] (PreFillP1                        :  15) @Run
[2018-01-12 18:26:16.157] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:26:16.207] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:26:16.207] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:26:16.207] (PreFillP2                        :  16) @Run
[2018-01-12 18:26:16.207] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:26:16.307] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:16.597] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:26:16.647] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:16.647] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:16.837] (PreFillP1                        :  15) @Stop
[2018-01-12 18:26:16.937] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:26:16.987] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:26:16.987] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:17.037] (PreFillP2                        :  16) @Stop
[2018-01-12 18:26:17.137] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:26:17.187] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:26:17.187] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:26:17.187] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:26:17.207] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:26:17.227] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:26:17.227] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:25:24.817] (Detector                         :   2) @Stop
[2018-01-12 18:26:17.767] ** STARTING H02 MAIN ROUTINE **
[2018-01-12 18:26:17.767] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:26:17.767] (Main Well                        :   0) @Run
[2018-01-12 18:26:17.767] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:26:17.767] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:26:17.767] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:26:17.767] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:26:17.767] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:26:17.767] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:26:17.767] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:26:17.767] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:26:17.767] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:26:17.767] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:26:18.277] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:26:18.277] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:26:18.317] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:26:18.437] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:26:18.437] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:26:18.437] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:26:18.437] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:26:18.437] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:26:18.437] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:26:18.437] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:26:18.437] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:26:18.437] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:26:18.437] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:26:18.457] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:26:18.507] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:26:18.527] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:26:18.777] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:26:18.777] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:26:18.777] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:26:18.777] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:26:18.827] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:26:18.827] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:26:18.827] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:26:18.827] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:26:18.927] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:19.197] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:26:19.247] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:26:19.247] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:19.557] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:26:19.607] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:26:19.607] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:19.857] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:26:19.907] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:26:19.907] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:20.057] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:26:20.107] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:26:20.107] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:20.157] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:26:20.277] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:26:20.327] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:26:20.327] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:20.377] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:26:20.617] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:26:20.667] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:26:20.667] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:26:20.667] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:26:20.667] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:26:20.667] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:26:20.727] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:26:20.777] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:26:20.837] (Main Well                        :   0) Move to Well 86 with z-offset of 2540 um (Wait)
[2018-01-12 18:26:23.897] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:24.137] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:26:24.187] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:26:24.187] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:24.287] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:26:24.337] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:26:24.337] (Main Well                        :   0) Stop Pump
[2018-01-12 18:26:24.377] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:26:24.437] (Main Well                        :   0) Move to Well 86 with z-offset of 310 um (Wait)
[2018-01-12 18:26:35.037] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:35.277] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:26:35.327] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:26:35.327] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:26:35.327] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:26:35.327] (Pickup Sample                    :  21) @Run
[2018-01-12 18:26:35.327] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:26:39.997] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:26:42.797] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:26:42.877] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:26:43.077] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:43.177] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:43.227] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:43.227] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:43.327] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:43.377] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:43.377] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:43.477] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:43.527] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:43.527] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:43.637] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:43.687] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:43.687] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:43.877] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:43.927] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:43.927] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:44.027] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:44.077] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:44.077] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:44.177] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:44.227] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:44.227] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:44.327] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:44.377] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:44.377] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:44.587] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:44.637] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:44.637] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:44.737] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:44.787] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:44.787] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:44.887] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:44.937] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:44.937] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:45.037] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:45.087] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:45.087] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:45.297] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:45.347] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:45.347] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:45.447] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:45.497] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:45.497] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:45.597] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:45.647] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:45.647] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:45.747] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:45.797] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:45.797] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:46.007] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:46.057] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:46.057] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:46.157] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:46.207] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:46.207] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:46.307] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:46.357] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:46.357] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:46.457] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:46.507] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:46.507] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:46.717] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:46.767] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:46.767] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:46.867] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:46.917] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:46.917] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:47.017] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:47.067] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:47.067] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:47.167] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:47.217] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:47.217] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:47.427] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:47.477] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:47.477] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:47.577] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:47.627] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:47.627] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:47.727] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:47.777] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:47.777] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:47.877] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:47.927] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:47.927] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:48.137] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:48.187] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:48.187] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:48.287] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:48.337] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:48.337] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:48.437] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:48.487] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:48.487] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:48.587] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:48.637] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:48.637] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:48.847] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:48.897] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:48.897] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:48.997] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:49.047] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:49.047] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:49.147] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:49.197] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:49.197] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:49.297] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:49.347] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:49.347] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:49.557] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:49.607] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:49.607] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:49.707] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:49.757] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:49.757] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:49.857] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:49.907] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:49.907] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:50.007] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:50.057] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:50.057] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:50.277] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:50.327] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:50.327] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:50.427] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:50.477] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:50.477] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:50.577] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:50.627] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:50.627] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:50.727] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:50.777] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:50.777] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:50.987] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:51.037] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:51.037] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:51.137] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:51.187] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:51.187] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:51.287] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:51.337] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:51.337] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:51.437] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:51.487] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:51.487] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:51.697] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:51.747] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:51.747] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:51.847] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:51.897] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:51.897] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:51.997] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:52.047] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:52.047] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:52.147] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:52.197] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:26:52.197] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:26:52.407] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:52.457] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:26:52.457] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:26:52.557] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:26:52.607] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:26:52.607] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:26:52.607] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:26:52.927] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:26:52.987] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:26:53.237] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:26:53.257] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:26:53.307] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:26:53.307] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:26:53.307] (Singulate Sample                 :  22) @Run
[2018-01-12 18:26:53.307] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:26:53.307] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:26:53.307] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:26:53.367] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:26:53.417] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:26:53.477] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:26:53.577] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_H02_RAW.qlb"
[2018-01-12 18:26:53.677] (Detector                         :   2) @Run
[2018-01-12 18:26:53.677] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:27:33.577] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:27:34.367] (Detector                         :   2) @Stop
[2018-01-12 18:27:34.377] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:27:34.377] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:27:34.477] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:27:34.527] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:27:34.527] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:34.737] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:27:34.787] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:27:34.787] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:27:34.787] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:27:35.107] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:27:35.107] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:27:35.107] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:27:35.107] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:27:35.107] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:27:35.107] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:27:35.107] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:35.107] (PreFillP1                        :  24) @Run
[2018-01-12 18:27:35.107] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:27:35.157] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:27:35.157] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:27:35.157] (PreFillP2                        :  25) @Run
[2018-01-12 18:27:35.157] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:27:35.257] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:35.687] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:35.737] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:27:35.737] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:35.887] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:35.937] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:27:35.937] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:36.087] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:36.137] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:27:36.137] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:36.447] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:36.497] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:27:36.497] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:36.747] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:36.797] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:27:36.797] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:36.947] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:36.997] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:27:36.997] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:37.307] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:37.357] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:27:37.357] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:37.607] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:37.657] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:27:37.657] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:37.807] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:37.857] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:27:37.857] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:38.167] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:38.217] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:27:38.217] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:27:38.377] (PreFillP1                        :  24) @Stop
[2018-01-12 18:27:38.477] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:38.527] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:27:38.527] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:27:38.677] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:38.727] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:27:38.727] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:27:38.937] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:27:38.987] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:27:38.987] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:27:38.987] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:27:39.007] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:27:39.007] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:27:39.007] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:27:39.037] (PreFillP2                        :  25) @Stop
[2018-01-12 18:27:39.057] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:27:39.107] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:27:39.127] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:27:39.377] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:27:39.377] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:27:39.377] (Flush Capillary                  :  27) @Run
[2018-01-12 18:27:39.377] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:27:39.427] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:27:39.427] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:27:39.427] (Flush Singulator                 :  28) @Run
[2018-01-12 18:27:39.427] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:27:39.527] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:39.717] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:27:39.767] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:27:39.767] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:40.017] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:27:40.067] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:27:40.067] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:40.377] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:27:40.427] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:27:40.427] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:40.677] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:27:40.727] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:27:40.727] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:40.877] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:27:40.927] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:27:40.927] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:27:40.977] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:27:41.097] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:27:41.147] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:27:41.147] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:27:41.147] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:27:41.157] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:27:41.197] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:27:41.357] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:27:41.357] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:27:41.357] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:27:41.377] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:27:41.427] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:27:41.447] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:27:41.697] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:27:41.697] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:27:41.697] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:27:41.697] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:27:41.747] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:27:41.747] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:27:41.747] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:27:41.747] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:27:41.847] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:42.137] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:27:42.187] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:27:42.187] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:42.477] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:27:42.527] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:27:42.527] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:27:42.577] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:27:42.677] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:27:42.727] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:27:42.727] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:27:42.727] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:27:42.757] (Main Well                        :   0) Stop Pump
[2018-01-12 18:27:42.777] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:27:42.817] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:27:42.817] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:27:42.817] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:27:42.857] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:27:42.907] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:27:43.017] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:27:43.267] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:27:43.267] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:27:43.267] (Flush Capillary                  :  33) @Run
[2018-01-12 18:27:43.267] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:27:43.317] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:27:43.317] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:27:43.317] (Flush Singulator                 :  34) @Run
[2018-01-12 18:27:43.317] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:27:43.417] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:43.687] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:27:43.737] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:27:43.737] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:44.047] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:27:44.097] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:27:44.097] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:27:44.147] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:27:44.247] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:27:44.347] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:27:44.397] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:27:44.397] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:27:44.397] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:27:44.417] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:27:44.437] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:27:44.437] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:27:44.437] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:27:44.457] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:27:44.507] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:27:44.637] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:27:44.887] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:27:44.887] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:27:44.887] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:27:44.887] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:27:44.937] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:27:44.937] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:27:44.937] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:27:44.937] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:27:45.037] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:45.307] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:27:45.357] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:27:45.357] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:27:45.667] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:27:45.717] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:27:45.717] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:27:45.767] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:27:45.867] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:27:45.967] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:27:46.017] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:27:46.017] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:27:46.017] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:27:46.037] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:27:46.057] (Main Well                        :   0) Stop routine
[2018-01-12 18:27:46.057] (Main Well                        :   0) @Stop
[2018-01-12 18:27:46.557] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:27:46.557] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:27:46.557] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:27:46.557] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:27:46.557] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:27:46.557] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:27:48.557] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:27:48.557] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:27:48.557] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:27:48.557] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:27:48.597] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:27:48.597] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:27:34.367] (Detector                         :  17) @Stop
[2018-01-12 18:27:53.047] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:27:53.047] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:27:53.047] (MainPre Routine                  :   0) @Run
[2018-01-12 18:27:53.047] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:27:59.117] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:27:59.117] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:27:59.117] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:27:59.757] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:27:59.757] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:27:59.767] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:28:01.497] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:28:01.497] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:28:01.497] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:28:01.657] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:28:01.707] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:28:01.727] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:28:01.977] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:28:01.977] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:28:01.977] (Initialize P1                    :   3) @Run
[2018-01-12 18:28:01.977] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:28:02.027] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:28:02.027] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:28:02.027] (Initialize P2                    :   4) @Run
[2018-01-12 18:28:02.027] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:28:02.217] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:02.447] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:02.567] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:28:02.617] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:02.617] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:02.667] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:28:02.717] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:02.717] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:02.907] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:28:02.957] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:02.957] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:03.007] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:28:03.057] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:03.057] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:03.107] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:28:03.157] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:03.157] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:03.207] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:28:03.257] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:03.257] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:03.307] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:28:03.357] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:03.357] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:03.407] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:28:03.457] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:03.457] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:03.527] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:28:03.577] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:03.577] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:03.767] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:28:03.817] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:03.817] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:03.867] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:28:03.917] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:03.917] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:03.967] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:28:04.017] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:04.017] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:04.067] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:28:04.117] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:04.117] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:04.167] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:28:04.217] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:04.217] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:04.267] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:28:04.317] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:04.317] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:04.387] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:28:04.437] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:04.437] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:04.627] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:28:04.677] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:28:04.677] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:28:04.677] (Initialize P1                    :   3) @Stop
[2018-01-12 18:28:04.727] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:28:04.777] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:28:04.777] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:04.877] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:28:04.927] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:28:04.927] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:28:04.927] (Initialize P2                    :   4) @Stop
[2018-01-12 18:28:05.027] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:28:05.227] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:28:05.247] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:28:05.247] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:28:05.247] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:28:05.247] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:28:05.247] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:05.247] (PreFillP1                        :   6) @Run
[2018-01-12 18:28:05.247] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:28:05.297] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:28:05.297] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:28:05.297] (PreFillP2                        :   7) @Run
[2018-01-12 18:28:05.297] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:28:05.397] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:05.667] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:05.717] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:05.717] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:05.887] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:05.937] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:05.937] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:06.227] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:06.277] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:06.277] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:06.527] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:06.577] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:06.577] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:06.727] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:06.777] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:06.777] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:06.947] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:06.997] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:06.997] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:07.287] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:07.337] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:07.337] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:07.487] (PreFillP1                        :   6) @Stop
[2018-01-12 18:28:07.587] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:07.637] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:28:07.637] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:07.787] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:07.837] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:28:07.837] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:08.047] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:08.097] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:28:08.097] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:08.247] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:08.297] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:28:08.297] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:08.397] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:08.447] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:28:08.447] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:08.597] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:08.647] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:28:08.647] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:08.857] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:08.907] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:28:08.907] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:28:08.907] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:28:08.947] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:28:08.957] (PreFillP2                        :   7) @Stop
[2018-01-12 18:28:08.997] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:28:08.997] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:28:08.997] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:28:09.017] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:09.067] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:28:09.087] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:28:09.337] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:28:09.337] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:09.337] (Flush Capillary                  :   9) @Run
[2018-01-12 18:28:09.337] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:28:09.387] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:28:09.387] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:28:09.387] (Flush Singulator                 :  10) @Run
[2018-01-12 18:28:09.387] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:28:09.487] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:09.737] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:09.787] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:09.787] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:09.937] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:09.987] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:09.987] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:10.157] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:10.207] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:10.207] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:10.497] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:10.547] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:10.547] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:10.797] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:10.847] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:10.847] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:10.997] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:11.047] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:11.047] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:11.217] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:11.267] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:11.267] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:11.557] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:11.607] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:28:11.607] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:11.657] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:28:11.757] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:28:11.857] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:11.907] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:28:11.907] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:28:11.907] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:28:11.947] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:28:11.967] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:28:11.967] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:28:11.967] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:28:12.007] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:12.057] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:28:12.167] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:28:12.417] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:28:12.417] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:12.417] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:28:12.417] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:28:12.467] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:28:12.467] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:28:12.467] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:28:12.467] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:28:12.567] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:12.837] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:12.887] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:12.887] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:13.197] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:13.247] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:13.247] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:13.497] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:13.547] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:13.547] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:13.697] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:13.747] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:13.747] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:13.917] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:13.967] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:13.967] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:14.017] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:28:14.267] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:14.317] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:28:14.317] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:14.367] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:28:14.467] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:14.517] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:28:14.517] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:28:14.517] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:28:14.517] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:28:14.517] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:28:14.517] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:28:14.517] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:14.517] (PreFillP1                        :   6) @Run
[2018-01-12 18:28:14.517] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:28:14.517] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:28:14.517] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:28:14.517] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:28:14.567] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:28:14.567] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:28:14.567] (PreFillP2                        :   7) @Run
[2018-01-12 18:28:14.567] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:28:14.667] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:14.957] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:15.007] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:15.007] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:15.297] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:15.347] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:15.347] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:15.497] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:15.547] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:15.547] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:15.697] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:15.747] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:15.747] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:15.917] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:15.967] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:15.967] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:16.257] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:16.307] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:16.307] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:16.557] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:16.607] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:16.607] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:16.757] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:16.807] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:28:16.807] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:16.857] (PreFillP1                        :   6) @Stop
[2018-01-12 18:28:16.977] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:17.027] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:28:17.027] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:17.317] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:17.367] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:28:17.367] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:17.517] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:17.567] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:28:17.567] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:17.667] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:17.717] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:28:17.717] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:17.867] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:17.917] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:28:17.917] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:18.127] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:28:18.177] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:28:18.177] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:28:18.177] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:28:18.217] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:28:18.227] (PreFillP2                        :   7) @Stop
[2018-01-12 18:28:18.267] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:28:18.267] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:28:18.267] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:28:18.287] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:18.337] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:28:18.357] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:28:18.607] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:28:18.607] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:18.607] (Flush Capillary                  :   9) @Run
[2018-01-12 18:28:18.607] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:28:18.657] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:28:18.657] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:28:18.657] (Flush Singulator                 :  10) @Run
[2018-01-12 18:28:18.657] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:28:18.757] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:19.007] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:19.057] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:19.057] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:19.207] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:19.257] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:19.257] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:19.427] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:19.477] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:19.477] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:19.767] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:19.817] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:19.817] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:20.067] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:20.117] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:20.117] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:20.267] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:20.317] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:20.317] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:20.487] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:20.537] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:20.537] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:20.827] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:20.877] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:28:20.877] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:20.927] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:28:21.027] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:28:21.127] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:28:21.177] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:28:21.177] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:28:21.177] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:28:21.217] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:28:21.237] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:28:21.237] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:28:21.237] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:28:21.277] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:21.327] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:28:21.437] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:28:21.687] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:28:21.687] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:21.687] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:28:21.687] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:28:21.737] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:28:21.737] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:28:21.737] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:28:21.737] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:28:21.837] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:22.107] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:22.157] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:22.157] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:22.467] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:22.517] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:22.517] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:22.767] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:22.817] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:22.817] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:22.967] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:23.017] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:23.017] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:23.187] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:23.237] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:28:23.237] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:23.287] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:28:23.527] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:23.577] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:28:23.577] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:23.627] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:28:23.727] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:28:23.777] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:28:23.777] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:28:23.777] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:28:23.787] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:28:23.787] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:28:23.787] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:28:23.787] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:28:23.787] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:28:23.787] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:28:23.787] (Prefill before Flush             :  14) @Run
[2018-01-12 18:28:23.787] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:28:23.787] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:28:23.787] (PreFillP1                        :  15) @Run
[2018-01-12 18:28:23.787] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:28:23.837] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:28:23.837] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:28:23.837] (PreFillP2                        :  16) @Run
[2018-01-12 18:28:23.837] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:28:23.937] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:24.227] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:28:24.277] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:24.277] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:24.467] (PreFillP1                        :  15) @Stop
[2018-01-12 18:28:24.567] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:28:24.617] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:28:24.617] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:24.667] (PreFillP2                        :  16) @Stop
[2018-01-12 18:28:24.767] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:28:24.817] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:28:24.817] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:28:24.817] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:28:24.837] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:28:24.857] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:28:24.857] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:27:34.367] (Detector                         :   2) @Stop
[2018-01-12 18:28:25.117] ** STARTING A03 MAIN ROUTINE **
[2018-01-12 18:28:25.117] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:28:25.117] (Main Well                        :   0) @Run
[2018-01-12 18:28:25.117] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:28:25.117] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:28:25.127] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:28:25.127] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:28:25.127] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:28:25.127] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:28:25.127] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:28:25.127] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:28:25.127] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:28:25.127] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:28:25.637] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:28:25.637] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:28:25.677] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:28:25.797] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:28:25.797] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:28:25.797] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:28:25.797] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:28:25.797] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:28:25.797] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:28:25.797] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:28:25.797] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:28:25.797] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:28:25.797] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:28:25.817] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:28:25.867] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:28:25.887] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:28:26.137] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:28:26.137] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:28:26.137] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:28:26.137] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:28:26.187] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:28:26.187] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:28:26.187] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:28:26.187] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:28:26.287] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:26.557] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:28:26.607] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:28:26.607] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:26.917] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:28:26.967] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:28:26.967] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:27.217] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:28:27.267] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:28:27.267] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:27.417] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:28:27.467] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:28:27.467] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:27.517] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:28:27.637] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:28:27.687] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:28:27.687] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:27.737] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:28:27.977] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:28:28.027] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:28:28.027] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:28:28.027] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:28:28.027] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:28:28.027] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:28:28.087] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:28:28.137] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:28:28.197] (Main Well                        :   0) Move to Well 3 with z-offset of 2540 um (Wait)
[2018-01-12 18:28:30.597] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:30.837] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:28:30.887] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:28:30.887] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:30.987] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:28:31.037] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:28:31.037] (Main Well                        :   0) Stop Pump
[2018-01-12 18:28:31.077] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:28:31.137] (Main Well                        :   0) Move to Well 3 with z-offset of 310 um (Wait)
[2018-01-12 18:28:40.437] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:40.677] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:28:40.727] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:28:40.727] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:28:40.727] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:28:40.727] (Pickup Sample                    :  21) @Run
[2018-01-12 18:28:40.727] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:28:45.397] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:28:47.477] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:28:47.557] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:28:47.757] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:47.857] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:47.907] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:47.907] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:48.007] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:48.057] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:48.057] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:48.157] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:48.207] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:48.207] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:48.317] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:48.367] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:48.367] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:48.557] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:48.607] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:48.607] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:48.707] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:48.757] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:48.757] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:48.857] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:48.907] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:48.907] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:49.007] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:49.057] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:49.057] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:49.267] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:49.317] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:49.317] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:49.417] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:49.467] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:49.467] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:49.567] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:49.617] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:49.617] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:49.717] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:49.767] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:49.767] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:49.977] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:50.027] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:50.027] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:50.127] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:50.177] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:50.177] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:50.277] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:50.327] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:50.327] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:50.427] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:50.477] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:50.477] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:50.687] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:50.737] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:50.737] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:50.837] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:50.887] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:50.887] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:50.987] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:51.037] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:51.037] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:51.137] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:51.187] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:51.187] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:51.397] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:51.447] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:51.447] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:51.547] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:51.597] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:51.597] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:51.697] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:51.748] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:51.748] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:51.848] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:51.898] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:51.898] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:52.108] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:52.158] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:52.158] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:52.258] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:52.308] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:52.308] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:52.408] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:52.458] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:52.458] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:52.558] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:52.608] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:52.608] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:52.818] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:52.868] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:52.868] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:52.968] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:53.018] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:53.018] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:53.118] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:53.168] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:53.168] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:53.268] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:53.318] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:53.318] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:53.528] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:53.578] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:53.578] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:53.678] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:53.728] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:53.728] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:53.828] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:53.878] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:53.878] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:53.978] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:54.028] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:54.028] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:54.238] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:54.288] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:54.288] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:54.388] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:54.438] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:54.438] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:54.538] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:54.588] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:54.588] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:54.688] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:54.738] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:54.738] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:54.948] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:54.998] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:54.998] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:55.098] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:55.148] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:55.148] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:55.248] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:55.298] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:55.298] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:55.398] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:55.448] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:55.448] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:55.658] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:55.708] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:55.708] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:55.808] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:55.858] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:55.858] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:55.958] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:56.008] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:56.008] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:56.108] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:56.158] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:56.158] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:56.368] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:56.418] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:56.418] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:56.518] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:56.568] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:56.568] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:56.668] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:56.718] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:56.718] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:56.818] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:56.868] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:28:56.868] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:28:57.078] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:57.128] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:28:57.128] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:28:57.228] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:28:57.278] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:28:57.278] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:28:57.278] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:28:57.528] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:28:57.658] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:28:57.908] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:28:57.928] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:28:57.978] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:28:57.978] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:28:57.978] (Singulate Sample                 :  22) @Run
[2018-01-12 18:28:57.978] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:28:57.978] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:28:57.978] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:28:58.038] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:28:58.088] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:28:58.148] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:28:58.248] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_A03_RAW.qlb"
[2018-01-12 18:28:58.358] (Detector                         :   2) @Run
[2018-01-12 18:28:58.358] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:29:38.260] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:29:39.240] (Detector                         :   2) @Stop
[2018-01-12 18:29:39.260] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:29:39.260] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:29:39.370] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:29:39.420] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:29:39.420] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:39.520] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:29:39.570] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:29:39.570] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:29:39.570] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:29:39.780] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:29:39.780] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:29:39.780] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:29:39.780] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:29:39.780] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:29:39.780] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:29:39.780] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:39.780] (PreFillP1                        :  24) @Run
[2018-01-12 18:29:39.780] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:29:39.830] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:29:39.830] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:29:39.830] (PreFillP2                        :  25) @Run
[2018-01-12 18:29:39.830] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:29:39.930] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:40.260] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:40.310] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:29:40.310] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:40.460] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:40.510] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:29:40.510] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:40.680] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:40.730] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:29:40.730] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:41.020] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:41.070] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:29:41.070] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:41.320] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:41.370] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:29:41.370] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:41.520] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:41.570] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:29:41.570] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:41.880] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:41.930] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:29:41.930] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:42.180] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:42.230] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:29:42.230] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:42.380] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:42.430] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:29:42.430] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:42.600] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:42.650] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:29:42.650] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:42.940] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:42.990] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:29:42.990] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:29:43.140] (PreFillP1                        :  24) @Stop
[2018-01-12 18:29:43.240] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:43.290] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:29:43.290] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:29:43.440] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:43.490] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:29:43.490] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:29:43.700] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:29:43.750] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:29:43.750] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:29:43.750] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:29:43.780] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:29:43.780] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:29:43.780] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:29:43.800] (PreFillP2                        :  25) @Stop
[2018-01-12 18:29:43.820] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:29:43.870] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:29:43.890] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:29:44.140] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:29:44.140] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:29:44.140] (Flush Capillary                  :  27) @Run
[2018-01-12 18:29:44.140] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:29:44.190] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:29:44.190] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:29:44.190] (Flush Singulator                 :  28) @Run
[2018-01-12 18:29:44.190] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:29:44.290] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:44.480] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:29:44.530] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:29:44.530] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:44.780] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:29:44.830] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:29:44.830] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:45.140] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:29:45.190] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:29:45.190] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:45.440] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:29:45.490] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:29:45.490] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:45.640] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:29:45.690] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:29:45.690] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:29:45.740] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:29:45.860] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:29:45.910] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:29:45.910] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:29:45.910] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:29:45.930] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:29:45.960] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:29:46.120] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:29:46.120] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:29:46.120] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:29:46.140] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:29:46.190] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:29:46.210] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:29:46.460] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:29:46.460] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:29:46.460] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:29:46.460] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:29:46.510] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:29:46.510] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:29:46.510] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:29:46.510] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:29:46.610] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:46.900] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:29:46.950] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:29:46.950] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:47.240] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:29:47.290] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:29:47.290] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:29:47.340] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:29:47.440] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:29:47.490] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:29:47.490] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:29:47.490] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:29:47.520] (Main Well                        :   0) Stop Pump
[2018-01-12 18:29:47.540] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:29:47.580] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:29:47.580] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:29:47.580] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:29:47.620] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:29:47.670] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:29:47.780] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:29:48.030] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:29:48.030] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:29:48.030] (Flush Capillary                  :  33) @Run
[2018-01-12 18:29:48.030] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:29:48.080] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:29:48.080] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:29:48.080] (Flush Singulator                 :  34) @Run
[2018-01-12 18:29:48.080] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:29:48.180] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:48.450] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:29:48.500] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:29:48.500] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:48.810] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:29:48.860] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:29:48.860] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:29:48.910] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:29:49.010] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:29:49.110] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:29:49.160] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:29:49.160] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:29:49.160] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:29:49.180] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:29:49.200] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:29:49.200] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:29:49.200] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:29:49.220] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:29:49.270] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:29:49.400] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:29:49.650] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:29:49.650] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:29:49.650] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:29:49.650] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:29:49.700] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:29:49.700] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:29:49.700] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:29:49.700] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:29:49.800] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:50.070] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:29:50.120] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:29:50.120] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:29:50.430] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:29:50.480] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:29:50.480] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:29:50.530] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:29:50.630] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:29:50.730] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:29:50.780] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:29:50.780] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:29:50.780] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:29:50.800] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:29:50.820] (Main Well                        :   0) Stop routine
[2018-01-12 18:29:50.820] (Main Well                        :   0) @Stop
[2018-01-12 18:29:51.190] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:29:51.190] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:29:51.190] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:29:51.190] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:29:51.190] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:29:51.190] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:29:53.190] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:29:53.190] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:29:53.190] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:29:53.190] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:29:53.230] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:29:53.230] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:29:39.240] (Detector                         :  17) @Stop
[2018-01-12 18:29:59.350] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:29:59.350] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:29:59.350] (MainPre Routine                  :   0) @Run
[2018-01-12 18:29:59.350] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:30:05.472] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:30:05.472] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:30:05.472] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:30:06.112] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:30:06.112] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:30:06.122] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:30:07.852] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:30:07.852] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:30:07.852] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:30:08.012] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:30:08.062] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:30:08.082] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:30:08.332] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:30:08.332] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:30:08.332] (Initialize P1                    :   3) @Run
[2018-01-12 18:30:08.332] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:30:08.382] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:30:08.382] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:30:08.382] (Initialize P2                    :   4) @Run
[2018-01-12 18:30:08.382] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:30:08.562] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:08.792] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:08.912] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:30:08.962] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:08.962] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:09.012] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:30:09.062] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:09.062] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:09.252] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:30:09.302] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:09.302] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:09.352] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:30:09.402] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:09.402] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:09.452] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:30:09.502] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:09.502] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:09.552] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:30:09.602] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:09.602] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:09.652] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:30:09.702] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:09.702] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:09.752] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:30:09.802] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:09.802] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:09.872] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:30:09.922] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:09.922] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:10.112] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:30:10.162] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:10.162] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:10.212] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:30:10.262] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:10.262] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:10.312] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:30:10.362] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:10.362] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:10.412] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:30:10.462] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:10.462] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:10.512] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:30:10.562] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:10.562] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:10.612] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:30:10.662] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:10.662] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:10.732] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:30:10.782] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:10.782] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:10.972] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:30:11.022] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:11.022] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:11.072] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:30:11.122] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:30:11.122] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:11.172] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:30:11.222] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:30:11.222] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:30:11.222] (Initialize P1                    :   3) @Stop
[2018-01-12 18:30:11.272] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:30:11.322] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:30:11.322] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:30:11.322] (Initialize P2                    :   4) @Stop
[2018-01-12 18:30:11.582] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:30:11.782] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:30:11.802] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:30:11.802] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:30:11.802] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:30:11.802] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:30:11.802] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:11.802] (PreFillP1                        :   6) @Run
[2018-01-12 18:30:11.802] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:30:11.852] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:30:11.852] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:30:11.852] (PreFillP2                        :   7) @Run
[2018-01-12 18:30:11.852] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:30:11.952] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:12.222] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:12.272] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:12.272] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:12.582] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:12.632] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:12.632] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:12.882] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:12.932] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:12.932] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:13.082] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:13.132] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:13.132] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:13.302] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:13.352] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:13.352] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:13.642] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:13.692] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:13.692] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:13.942] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:13.992] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:30:13.992] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:14.042] (PreFillP1                        :   6) @Stop
[2018-01-12 18:30:14.142] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:14.192] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:30:14.192] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:14.362] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:14.412] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:30:14.412] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:14.602] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:14.652] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:30:14.652] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:14.802] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:14.852] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:30:14.852] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:14.952] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:15.002] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:30:15.002] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:15.152] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:15.202] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:30:15.202] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:15.422] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:15.472] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:30:15.472] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:30:15.472] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:30:15.502] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:30:15.522] (PreFillP2                        :   7) @Stop
[2018-01-12 18:30:15.562] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:30:15.562] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:30:15.562] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:30:15.582] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:15.632] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:30:15.652] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:30:15.902] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:30:15.902] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:15.902] (Flush Capillary                  :   9) @Run
[2018-01-12 18:30:15.902] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:30:15.952] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:30:15.952] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:30:15.952] (Flush Singulator                 :  10) @Run
[2018-01-12 18:30:15.952] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:30:16.052] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:16.302] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:16.352] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:16.352] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:16.502] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:16.552] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:16.552] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:16.722] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:16.772] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:16.772] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:17.062] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:17.112] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:17.112] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:17.362] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:17.412] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:17.412] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:17.562] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:17.612] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:17.612] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:17.782] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:17.832] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:17.832] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:18.122] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:18.172] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:30:18.172] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:18.222] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:30:18.322] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:30:18.422] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:18.472] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:30:18.472] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:30:18.472] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:30:18.512] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:30:18.532] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:30:18.532] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:30:18.532] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:30:18.572] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:18.622] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:30:18.732] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:30:18.982] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:30:18.982] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:18.982] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:30:18.982] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:30:19.032] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:30:19.032] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:30:19.032] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:30:19.032] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:30:19.132] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:19.402] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:19.452] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:19.452] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:19.762] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:19.812] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:19.812] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:20.062] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:20.112] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:20.112] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:20.262] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:20.312] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:20.312] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:20.482] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:20.532] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:20.532] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:20.582] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:30:20.822] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:20.872] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:30:20.872] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:20.922] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:30:21.022] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:21.072] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:30:21.072] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:30:21.072] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:30:21.082] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:30:21.082] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:30:21.082] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:30:21.082] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:30:21.082] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:30:21.082] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:30:21.082] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:21.082] (PreFillP1                        :   6) @Run
[2018-01-12 18:30:21.082] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:30:21.132] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:30:21.132] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:30:21.132] (PreFillP2                        :   7) @Run
[2018-01-12 18:30:21.132] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:30:21.232] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:21.522] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:21.572] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:21.572] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:21.862] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:21.912] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:21.912] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:22.062] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:22.112] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:22.112] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:22.262] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:22.312] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:22.312] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:22.622] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:22.672] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:22.672] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:22.922] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:22.972] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:22.972] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:23.122] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:23.172] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:23.172] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:23.362] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:23.412] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:30:23.412] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:23.462] (PreFillP1                        :   6) @Stop
[2018-01-12 18:30:23.702] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:23.752] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:30:23.752] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:23.902] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:23.952] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:30:23.952] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:24.052] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:24.102] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:30:24.102] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:24.252] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:24.302] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:30:24.302] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:24.512] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:24.562] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:30:24.562] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:24.712] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:30:24.762] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:30:24.762] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:30:24.762] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:30:24.782] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:30:24.822] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:30:24.822] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:30:24.822] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:30:24.922] (PreFillP2                        :   7) @Stop
[2018-01-12 18:30:24.942] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:24.992] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:30:25.122] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:30:25.372] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:30:25.372] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:25.372] (Flush Capillary                  :   9) @Run
[2018-01-12 18:30:25.372] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:30:25.422] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:30:25.422] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:30:25.422] (Flush Singulator                 :  10) @Run
[2018-01-12 18:30:25.422] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:30:25.522] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:25.792] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:25.842] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:25.842] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:26.152] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:26.202] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:26.202] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:26.452] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:26.502] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:26.502] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:26.652] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:26.702] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:26.702] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:26.872] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:26.922] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:26.922] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:27.212] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:27.262] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:27.262] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:27.512] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:27.562] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:30:27.562] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:27.612] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:30:27.712] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:30:27.762] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:30:27.762] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:30:27.762] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:30:27.772] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:30:27.832] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:30:27.992] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:30:27.992] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:30:27.992] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:30:28.012] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:28.062] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:30:28.082] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:30:28.332] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:30:28.332] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:28.332] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:30:28.332] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:30:28.382] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:30:28.382] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:30:28.382] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:30:28.382] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:30:28.482] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:28.772] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:28.822] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:28.822] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:29.112] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:29.162] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:29.162] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:29.312] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:29.362] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:29.362] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:29.512] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:29.562] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:29.562] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:29.732] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:29.782] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:30:29.782] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:29.832] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:30:30.072] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:30.122] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:30:30.122] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:30.172] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:30:30.272] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:30:30.322] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:30:30.322] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:30:30.322] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:30:30.342] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:30:30.342] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:30:30.342] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:30:30.342] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:30:30.342] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:30:30.342] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:30:30.342] (Prefill before Flush             :  14) @Run
[2018-01-12 18:30:30.342] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:30:30.342] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:30:30.342] (PreFillP1                        :  15) @Run
[2018-01-12 18:30:30.342] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:30:30.392] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:30:30.392] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:30:30.392] (PreFillP2                        :  16) @Run
[2018-01-12 18:30:30.392] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:30:30.492] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:30.782] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:30:30.832] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:30.832] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:31.022] (PreFillP1                        :  15) @Stop
[2018-01-12 18:30:31.122] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:30:31.172] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:30:31.172] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:31.222] (PreFillP2                        :  16) @Stop
[2018-01-12 18:30:31.322] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:30:31.372] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:30:31.372] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:30:31.372] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:30:31.392] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:30:31.412] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:30:31.412] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:29:39.240] (Detector                         :   2) @Stop
[2018-01-12 18:30:31.922] ** STARTING B03 MAIN ROUTINE **
[2018-01-12 18:30:31.922] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:30:31.932] (Main Well                        :   0) @Run
[2018-01-12 18:30:31.932] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:30:31.932] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:30:31.932] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:30:31.932] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:30:31.932] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:30:31.932] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:30:31.932] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:30:31.932] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:30:31.932] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:30:31.932] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:30:32.442] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:30:32.442] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:30:32.482] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:30:32.602] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:30:32.602] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:30:32.602] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:30:32.602] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:30:32.602] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:30:32.602] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:30:32.602] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:30:32.602] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:30:32.602] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:30:32.602] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:30:32.622] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:30:32.672] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:30:32.692] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:30:32.942] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:30:32.942] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:30:32.942] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:30:32.942] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:30:32.992] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:30:32.992] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:30:32.992] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:30:32.992] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:30:33.092] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:33.362] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:30:33.412] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:30:33.412] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:33.722] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:30:33.772] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:30:33.772] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:34.022] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:30:34.072] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:30:34.072] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:34.222] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:30:34.272] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:30:34.272] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:34.322] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:30:34.442] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:30:34.492] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:30:34.492] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:34.542] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:30:34.782] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:30:34.832] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:30:34.832] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:30:34.832] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:30:34.832] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:30:34.832] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:30:34.892] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:30:34.942] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:30:35.002] (Main Well                        :   0) Move to Well 15 with z-offset of 2540 um (Wait)
[2018-01-12 18:30:37.342] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:30:37.582] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:30:37.632] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:30:37.632] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:37.732] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:30:37.782] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:30:37.782] (Main Well                        :   0) Stop Pump
[2018-01-12 18:30:37.822] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:30:37.882] (Main Well                        :   0) Move to Well 15 with z-offset of 310 um (Wait)
[2018-01-12 18:30:47.542] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:47.782] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:30:47.832] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:30:47.832] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:30:47.832] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:30:47.832] (Pickup Sample                    :  21) @Run
[2018-01-12 18:30:47.832] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:30:52.502] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:30:54.582] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:30:54.662] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:30:54.862] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:54.962] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:55.012] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:55.012] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:55.112] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:55.162] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:55.162] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:55.262] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:55.312] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:55.312] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:55.422] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:55.472] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:55.472] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:55.662] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:55.712] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:55.712] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:55.812] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:55.862] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:55.862] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:55.962] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:56.012] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:56.012] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:56.112] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:56.162] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:56.162] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:56.372] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:56.422] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:56.422] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:56.522] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:56.572] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:56.572] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:56.672] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:56.722] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:56.722] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:56.822] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:56.872] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:56.872] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:57.082] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:57.132] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:57.132] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:57.232] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:57.282] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:57.282] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:57.382] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:57.432] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:57.432] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:57.532] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:57.582] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:57.582] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:57.792] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:57.842] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:57.842] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:57.942] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:57.992] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:57.992] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:58.092] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:58.142] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:58.142] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:58.242] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:58.292] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:58.292] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:58.502] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:58.552] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:58.552] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:58.652] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:58.702] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:58.702] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:58.802] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:58.852] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:58.852] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:58.952] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:59.002] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:59.002] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:59.212] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:59.262] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:59.262] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:59.362] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:59.412] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:59.412] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:59.512] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:59.562] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:59.562] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:59.662] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:59.712] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:59.712] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:30:59.922] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:30:59.972] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:30:59.972] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:00.072] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:00.122] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:00.122] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:00.222] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:00.272] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:00.272] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:00.372] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:00.422] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:00.422] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:00.632] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:00.682] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:00.682] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:00.782] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:00.832] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:00.832] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:00.932] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:00.982] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:00.982] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:01.082] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:01.132] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:01.132] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:01.342] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:01.392] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:01.392] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:01.492] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:01.542] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:01.542] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:01.642] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:01.692] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:01.692] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:01.792] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:01.842] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:01.842] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:02.052] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:02.102] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:02.102] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:02.202] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:02.252] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:02.252] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:02.352] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:02.402] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:02.402] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:02.502] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:02.552] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:02.552] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:02.762] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:02.812] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:02.812] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:02.912] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:02.962] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:02.962] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:03.062] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:03.112] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:03.112] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:03.212] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:03.262] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:03.262] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:03.472] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:03.522] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:03.522] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:03.622] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:03.672] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:03.672] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:03.772] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:03.822] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:03.822] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:03.922] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:03.972] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:03.972] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:04.182] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:04.232] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:31:04.232] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:04.332] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:31:04.382] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:31:04.382] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:31:04.382] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:31:04.632] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:31:04.762] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:31:05.012] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:31:05.032] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:31:05.082] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:31:05.082] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:31:05.082] (Singulate Sample                 :  22) @Run
[2018-01-12 18:31:05.082] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:31:05.082] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:31:05.082] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:31:05.142] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:31:05.192] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:31:05.253] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:31:05.353] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_B03_RAW.qlb"
[2018-01-12 18:31:05.453] (Detector                         :   2) @Run
[2018-01-12 18:31:05.453] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:31:45.353] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:31:46.433] (Detector                         :   2) @Stop
[2018-01-12 18:31:46.553] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:31:46.553] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:46.653] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:31:46.703] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:31:46.703] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:46.803] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:31:46.853] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:31:46.853] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:31:46.853] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:31:47.083] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:31:47.083] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:31:47.083] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:31:47.083] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:31:47.083] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:31:47.083] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:31:47.083] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:47.083] (PreFillP1                        :  24) @Run
[2018-01-12 18:31:47.083] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:31:47.133] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:31:47.133] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:31:47.133] (PreFillP2                        :  25) @Run
[2018-01-12 18:31:47.133] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:31:47.233] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:47.503] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:47.553] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:47.553] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:47.703] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:47.753] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:47.753] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:48.073] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:48.123] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:48.123] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:48.383] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:48.433] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:48.433] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:48.583] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:48.633] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:48.633] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:48.943] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:48.993] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:48.993] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:49.243] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:49.293] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:49.293] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:49.443] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:49.493] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:49.493] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:49.663] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:49.713] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:31:49.713] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:50.003] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:50.053] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:31:50.053] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:50.203] (PreFillP1                        :  24) @Stop
[2018-01-12 18:31:50.303] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:50.353] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:31:50.353] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:50.503] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:50.553] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:31:50.553] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:50.763] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:50.813] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:31:50.813] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:50.863] (PreFillP2                        :  25) @Stop
[2018-01-12 18:31:50.963] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:31:51.013] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:31:51.013] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:31:51.013] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:31:51.043] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:31:51.043] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:31:51.043] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:31:51.063] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:31:51.113] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:31:51.133] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:31:51.383] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:31:51.383] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:31:51.383] (Flush Capillary                  :  27) @Run
[2018-01-12 18:31:51.383] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:31:51.433] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:31:51.433] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:31:51.433] (Flush Singulator                 :  28) @Run
[2018-01-12 18:31:51.433] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:31:51.533] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:51.803] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:31:51.853] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:31:51.853] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:52.023] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:31:52.073] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:31:52.073] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:52.363] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:31:52.413] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:31:52.413] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:52.663] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:31:52.713] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:31:52.713] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:52.763] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:31:52.863] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:31:52.913] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:31:52.913] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:52.963] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:31:53.083] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:31:53.133] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:31:53.133] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:31:53.133] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:31:53.143] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:31:53.243] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:31:53.243] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:31:53.243] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:31:53.263] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:31:53.313] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:31:53.333] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:31:53.583] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:31:53.583] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:31:53.583] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:31:53.583] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:31:53.633] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:31:53.633] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:31:53.633] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:31:53.633] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:31:53.733] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:54.023] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:31:54.073] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:31:54.073] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:54.363] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:31:54.413] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:31:54.413] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:54.463] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:31:54.563] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:31:54.613] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:31:54.613] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:31:54.613] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:31:54.643] (Main Well                        :   0) Stop Pump
[2018-01-12 18:31:54.663] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:31:54.703] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:31:54.703] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:31:54.703] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:31:54.743] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:31:54.793] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:31:54.903] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:31:55.153] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:31:55.153] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:31:55.153] (Flush Capillary                  :  33) @Run
[2018-01-12 18:31:55.153] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:31:55.203] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:31:55.203] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:31:55.203] (Flush Singulator                 :  34) @Run
[2018-01-12 18:31:55.203] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:31:55.303] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:55.573] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:31:55.623] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:31:55.623] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:55.933] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:31:55.983] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:31:55.983] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:56.033] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:31:56.133] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:31:56.233] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:31:56.283] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:31:56.283] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:31:56.283] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:31:56.303] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:31:56.323] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:31:56.323] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:31:56.323] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:31:56.343] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:31:56.393] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:31:56.523] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:31:56.773] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:31:56.773] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:31:56.773] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:31:56.773] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:31:56.823] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:31:56.823] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:31:56.823] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:31:56.823] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:31:56.923] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:57.193] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:31:57.243] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:31:57.243] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:31:57.553] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:31:57.603] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:31:57.603] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:31:57.653] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:31:57.753] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:31:57.853] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:31:57.903] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:31:57.903] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:31:57.903] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:31:57.923] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:31:58.543] (Main Well                        :   0) Stop routine
[2018-01-12 18:31:58.543] (Main Well                        :   0) @Stop
[2018-01-12 18:31:58.993] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:31:58.993] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:31:58.993] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:31:58.993] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:31:58.993] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:31:58.993] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:32:00.993] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:32:00.993] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:32:00.993] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:32:00.993] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:32:01.033] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:32:01.033] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:31:46.433] (Detector                         :  17) @Stop
[2018-01-12 18:32:04.953] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:32:04.953] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:32:04.953] (MainPre Routine                  :   0) @Run
[2018-01-12 18:32:04.953] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:32:09.794] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:32:09.794] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:32:09.794] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:32:10.434] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:32:10.434] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:32:10.444] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:32:12.174] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:32:12.174] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:32:12.174] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:32:12.334] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:32:12.384] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:32:12.404] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:32:12.654] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:32:12.654] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:32:12.654] (Initialize P1                    :   3) @Run
[2018-01-12 18:32:12.654] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:32:12.704] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:32:12.704] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:32:12.704] (Initialize P2                    :   4) @Run
[2018-01-12 18:32:12.704] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:32:12.884] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:13.114] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:13.234] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:32:13.284] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:13.284] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:13.334] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:32:13.384] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:13.384] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:13.574] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:32:13.624] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:13.624] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:13.674] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:32:13.724] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:13.724] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:13.774] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:32:13.824] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:13.824] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:13.874] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:32:13.924] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:13.924] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:13.974] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:32:14.024] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:14.024] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:14.074] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:32:14.124] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:14.124] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:14.194] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:32:14.244] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:14.244] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:14.434] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:32:14.484] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:14.484] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:14.534] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:32:14.584] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:14.584] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:14.634] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:32:14.684] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:14.684] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:14.734] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:32:14.784] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:14.784] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:14.834] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:32:14.884] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:14.884] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:14.934] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:32:14.984] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:14.984] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:15.054] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:32:15.104] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:15.104] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:15.294] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:32:15.344] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:15.344] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:15.394] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:32:15.444] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:32:15.444] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:15.494] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:32:15.544] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:32:15.544] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:32:15.544] (Initialize P1                    :   3) @Stop
[2018-01-12 18:32:15.594] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:32:15.644] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:32:15.644] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:32:15.644] (Initialize P2                    :   4) @Stop
[2018-01-12 18:32:15.904] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:32:16.104] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:32:16.124] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:32:16.124] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:32:16.124] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:32:16.124] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:32:16.124] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:16.124] (PreFillP1                        :   6) @Run
[2018-01-12 18:32:16.124] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:32:16.174] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:32:16.174] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:32:16.174] (PreFillP2                        :   7) @Run
[2018-01-12 18:32:16.174] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:32:16.274] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:16.544] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:16.594] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:16.594] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:16.904] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:16.954] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:16.954] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:17.204] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:17.254] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:17.254] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:17.404] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:17.454] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:17.454] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:17.624] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:17.674] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:17.674] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:17.964] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:18.014] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:18.014] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:18.264] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:18.314] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:32:18.314] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:18.364] (PreFillP1                        :   6) @Stop
[2018-01-12 18:32:18.464] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:18.514] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:32:18.514] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:18.684] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:18.734] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:32:18.734] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:18.924] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:18.974] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:32:18.974] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:19.124] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:19.174] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:32:19.174] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:19.284] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:19.334] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:32:19.334] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:19.504] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:19.554] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:32:19.554] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:19.744] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:19.794] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:32:19.794] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:32:19.794] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:32:19.824] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:32:19.844] (PreFillP2                        :   7) @Stop
[2018-01-12 18:32:19.884] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:32:19.884] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:32:19.884] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:32:19.904] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:19.954] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:32:19.974] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:32:20.224] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:32:20.224] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:20.224] (Flush Capillary                  :   9) @Run
[2018-01-12 18:32:20.224] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:32:20.274] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:32:20.274] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:32:20.274] (Flush Singulator                 :  10) @Run
[2018-01-12 18:32:20.274] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:32:20.374] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:20.624] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:20.674] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:20.674] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:20.824] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:20.874] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:20.874] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:21.044] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:21.094] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:21.094] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:21.384] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:21.434] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:21.434] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:21.684] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:21.734] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:21.734] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:21.884] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:21.934] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:21.934] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:22.104] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:22.154] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:22.154] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:22.444] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:22.494] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:32:22.494] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:22.544] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:32:22.644] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:32:22.744] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:22.794] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:32:22.794] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:32:22.794] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:32:22.834] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:32:22.854] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:32:22.854] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:32:22.854] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:32:22.894] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:22.944] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:32:23.054] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:32:23.304] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:32:23.304] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:23.304] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:32:23.304] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:32:23.354] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:32:23.354] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:32:23.354] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:32:23.354] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:32:23.454] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:23.724] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:23.774] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:23.774] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:24.084] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:24.134] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:24.134] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:24.384] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:24.434] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:24.434] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:24.584] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:24.634] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:24.634] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:24.804] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:24.854] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:24.854] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:24.904] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:32:25.144] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:25.194] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:32:25.194] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:25.244] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:32:25.344] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:25.394] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:32:25.394] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:32:25.394] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:32:25.404] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:32:25.404] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:32:25.404] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:32:25.404] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:32:25.404] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:32:25.404] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:32:25.404] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:25.404] (PreFillP1                        :   6) @Run
[2018-01-12 18:32:25.404] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:32:25.454] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:32:25.454] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:32:25.454] (PreFillP2                        :   7) @Run
[2018-01-12 18:32:25.454] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:32:25.554] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:25.844] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:25.894] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:25.894] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:26.184] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:26.234] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:26.234] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:26.384] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:26.434] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:26.434] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:26.584] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:26.634] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:26.634] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:26.804] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:26.854] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:26.854] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:27.144] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:27.194] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:27.194] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:27.444] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:27.494] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:27.494] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:27.644] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:27.694] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:32:27.694] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:27.744] (PreFillP1                        :   6) @Stop
[2018-01-12 18:32:27.864] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:27.914] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:32:27.914] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:28.204] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:28.254] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:32:28.254] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:28.414] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:28.464] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:32:28.464] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:28.564] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:28.614] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:32:28.614] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:28.784] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:28.834] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:32:28.834] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:29.024] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:32:29.074] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:32:29.074] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:32:29.074] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:32:29.104] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:32:29.124] (PreFillP2                        :   7) @Stop
[2018-01-12 18:32:29.164] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:32:29.164] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:32:29.164] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:32:29.184] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:29.234] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:32:29.254] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:32:29.504] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:32:29.504] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:29.504] (Flush Capillary                  :   9) @Run
[2018-01-12 18:32:29.504] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:32:29.554] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:32:29.554] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:32:29.554] (Flush Singulator                 :  10) @Run
[2018-01-12 18:32:29.554] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:32:29.654] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:29.904] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:29.954] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:29.954] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:30.104] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:30.154] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:30.154] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:30.324] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:30.374] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:30.374] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:30.664] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:30.714] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:30.714] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:30.964] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:31.014] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:31.014] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:31.194] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:31.244] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:31.244] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:31.554] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:31.604] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:31.604] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:31.654] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:32:31.754] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:32:31.854] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:31.904] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:32:31.904] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:32.004] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:32:32.054] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:32:32.054] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:32:32.054] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:32:32.064] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:32:32.184] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:32:32.184] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:32:32.184] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:32:32.204] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:32.254] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:32:32.274] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:32:32.524] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:32:32.524] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:32.524] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:32:32.524] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:32:32.574] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:32:32.574] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:32:32.574] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:32:32.574] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:32:32.674] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:32.964] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:33.014] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:33.014] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:33.304] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:33.354] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:33.354] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:33.504] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:33.554] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:33.554] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:33.704] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:33.754] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:33.754] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:33.924] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:33.974] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:32:33.974] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:34.024] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:32:34.264] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:34.314] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:32:34.314] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:34.364] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:32:34.464] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:32:34.514] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:32:34.514] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:32:34.514] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:32:34.534] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:32:34.534] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:32:34.534] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:32:34.534] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:32:34.534] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:32:34.534] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:32:34.534] (Prefill before Flush             :  14) @Run
[2018-01-12 18:32:34.534] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:32:34.534] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:32:34.534] (PreFillP1                        :  15) @Run
[2018-01-12 18:32:34.534] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:32:34.584] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:32:34.584] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:32:34.584] (PreFillP2                        :  16) @Run
[2018-01-12 18:32:34.584] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:32:34.684] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:34.974] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:32:35.024] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:35.024] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:35.214] (PreFillP1                        :  15) @Stop
[2018-01-12 18:32:35.314] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:32:35.364] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:32:35.364] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:35.414] (PreFillP2                        :  16) @Stop
[2018-01-12 18:32:35.514] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:32:35.564] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:32:35.564] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:32:35.564] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:32:35.584] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:32:35.604] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:32:35.604] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:31:46.433] (Detector                         :   2) @Stop
[2018-01-12 18:32:36.024] ** STARTING C03 MAIN ROUTINE **
[2018-01-12 18:32:36.024] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:32:36.034] (Main Well                        :   0) @Run
[2018-01-12 18:32:36.034] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:32:36.034] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:32:36.034] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:32:36.034] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:32:36.034] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:32:36.034] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:32:36.034] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:32:36.034] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:32:36.034] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:32:36.034] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:32:36.534] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:32:36.534] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:32:36.584] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:32:36.694] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:32:36.694] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:32:36.694] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:32:36.694] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:32:36.694] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:32:36.694] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:32:36.694] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:32:36.694] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:32:36.694] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:32:36.694] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:32:36.714] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:32:36.764] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:32:36.784] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:32:37.034] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:32:37.034] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:32:37.034] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:32:37.034] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:32:37.084] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:32:37.084] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:32:37.084] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:32:37.084] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:32:37.184] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:37.454] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:32:37.504] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:32:37.504] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:37.814] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:32:37.864] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:32:37.864] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:38.114] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:32:38.164] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:32:38.164] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:38.314] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:32:38.364] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:32:38.364] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:38.414] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:32:38.534] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:32:38.584] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:32:38.584] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:38.634] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:32:38.874] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:32:38.924] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:32:38.924] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:32:38.924] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:32:38.924] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:32:38.924] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:32:38.984] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:32:39.034] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:32:39.094] (Main Well                        :   0) Move to Well 27 with z-offset of 2540 um (Wait)
[2018-01-12 18:32:41.814] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:32:42.054] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:32:42.104] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:32:42.104] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:42.204] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:32:42.254] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:32:42.254] (Main Well                        :   0) Stop Pump
[2018-01-12 18:32:42.294] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:32:42.354] (Main Well                        :   0) Move to Well 27 with z-offset of 310 um (Wait)
[2018-01-12 18:32:52.014] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:52.254] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:32:52.304] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:32:52.304] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:32:52.304] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:32:52.304] (Pickup Sample                    :  21) @Run
[2018-01-12 18:32:52.304] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:32:56.974] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:32:59.424] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:32:59.504] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:32:59.704] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:59.804] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:32:59.854] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:32:59.854] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:32:59.954] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:00.004] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:00.004] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:00.104] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:00.154] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:00.154] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:00.264] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:00.314] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:00.314] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:00.504] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:00.554] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:00.554] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:00.654] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:00.704] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:00.704] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:00.804] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:00.854] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:00.854] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:00.954] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:01.004] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:01.004] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:01.214] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:01.264] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:01.264] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:01.364] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:01.414] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:01.414] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:01.514] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:01.564] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:01.564] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:01.664] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:01.714] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:01.714] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:01.924] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:01.974] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:01.974] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:02.074] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:02.124] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:02.124] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:02.224] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:02.274] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:02.274] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:02.374] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:02.424] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:02.424] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:02.634] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:02.684] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:02.684] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:02.784] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:02.834] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:02.834] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:02.934] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:02.984] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:02.984] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:03.084] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:03.134] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:03.134] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:03.344] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:03.394] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:03.394] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:03.494] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:03.544] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:03.544] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:03.644] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:03.694] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:03.694] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:03.794] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:03.844] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:03.844] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:04.054] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:04.104] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:04.104] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:04.204] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:04.254] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:04.254] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:04.354] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:04.404] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:04.404] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:04.504] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:04.554] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:04.554] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:04.764] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:04.814] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:04.814] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:04.914] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:04.964] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:04.964] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:05.064] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:05.114] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:05.114] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:05.214] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:05.264] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:05.264] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:05.474] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:05.524] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:05.524] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:05.624] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:05.674] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:05.674] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:05.774] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:05.824] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:05.824] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:05.924] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:05.974] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:05.974] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:06.184] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:06.234] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:06.234] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:06.334] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:06.384] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:06.384] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:06.484] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:06.534] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:06.534] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:06.634] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:06.684] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:06.684] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:06.894] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:06.944] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:06.944] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:07.044] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:07.094] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:07.094] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:07.194] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:07.244] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:07.244] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:07.344] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:07.394] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:07.394] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:07.604] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:07.654] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:07.654] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:07.754] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:07.804] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:07.804] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:07.904] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:07.954] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:07.954] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:08.054] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:08.104] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:08.104] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:08.314] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:08.364] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:08.364] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:08.464] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:08.514] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:08.514] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:08.614] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:08.664] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:08.664] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:08.764] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:08.814] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:08.814] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:09.024] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:09.074] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:33:09.074] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:09.174] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:33:09.224] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:33:09.224] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:33:09.224] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:33:09.504] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:33:09.604] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:33:09.854] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:33:09.874] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:33:09.924] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:33:09.924] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:33:09.924] (Singulate Sample                 :  22) @Run
[2018-01-12 18:33:09.924] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:33:09.924] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:33:09.924] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:33:09.984] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:33:10.034] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:33:10.094] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:33:10.194] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_C03_RAW.qlb"
[2018-01-12 18:33:10.294] (Detector                         :   2) @Run
[2018-01-12 18:33:10.294] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:33:50.194] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:33:51.174] (Detector                         :   2) @Stop
[2018-01-12 18:33:51.194] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:33:51.194] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:51.304] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:33:51.354] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:33:51.354] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:51.454] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:33:51.504] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:33:51.504] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:33:51.504] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:33:51.724] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:33:51.724] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:33:51.724] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:33:51.724] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:33:51.724] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:33:51.724] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:33:51.724] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:51.724] (PreFillP1                        :  24) @Run
[2018-01-12 18:33:51.724] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:33:51.774] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:33:51.774] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:33:51.774] (PreFillP2                        :  25) @Run
[2018-01-12 18:33:51.774] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:33:51.874] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:52.194] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:52.244] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:52.244] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:52.394] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:52.444] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:52.444] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:52.614] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:52.664] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:52.664] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:52.954] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:53.004] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:53.004] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:53.254] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:53.304] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:53.304] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:53.454] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:53.504] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:53.504] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:53.814] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:53.864] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:53.864] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:54.114] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:54.164] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:54.164] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:54.314] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:54.364] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:54.364] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:54.534] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:54.584] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:33:54.584] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:54.874] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:54.924] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:33:54.924] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:55.074] (PreFillP1                        :  24) @Stop
[2018-01-12 18:33:55.174] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:55.224] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:33:55.224] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:55.374] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:55.424] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:33:55.424] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:55.634] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:33:55.684] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:33:55.684] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:33:55.684] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:33:55.724] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:33:55.724] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:33:55.724] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:33:55.734] (PreFillP2                        :  25) @Stop
[2018-01-12 18:33:55.754] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:33:55.804] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:33:55.824] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:33:56.074] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:33:56.074] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:33:56.074] (Flush Capillary                  :  27) @Run
[2018-01-12 18:33:56.074] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:33:56.124] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:33:56.124] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:33:56.124] (Flush Singulator                 :  28) @Run
[2018-01-12 18:33:56.124] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:33:56.224] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:56.414] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:33:56.464] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:33:56.464] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:56.714] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:33:56.764] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:33:56.764] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:57.074] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:33:57.124] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:33:57.124] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:57.374] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:33:57.424] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:33:57.424] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:57.574] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:33:57.624] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:33:57.624] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:57.674] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:33:57.794] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:33:57.844] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:33:57.844] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:33:57.844] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:33:57.874] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:33:57.894] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:33:58.054] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:33:58.054] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:33:58.054] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:33:58.074] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:33:58.124] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:33:58.144] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:33:58.394] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:33:58.394] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:33:58.394] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:33:58.394] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:33:58.444] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:33:58.444] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:33:58.444] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:33:58.444] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:33:58.544] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:58.834] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:33:58.884] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:33:58.884] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:33:59.174] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:33:59.224] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:33:59.224] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:33:59.274] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:33:59.374] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:33:59.424] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:33:59.424] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:33:59.424] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:33:59.454] (Main Well                        :   0) Stop Pump
[2018-01-12 18:33:59.474] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:33:59.514] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:33:59.514] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:33:59.514] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:33:59.554] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:33:59.604] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:33:59.714] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:33:59.964] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:33:59.964] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:33:59.964] (Flush Capillary                  :  33) @Run
[2018-01-12 18:33:59.964] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:34:00.014] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:34:00.014] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:34:00.014] (Flush Singulator                 :  34) @Run
[2018-01-12 18:34:00.014] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:34:00.114] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:00.384] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:34:00.434] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:00.434] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:00.744] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:34:00.794] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:34:00.794] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:00.844] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:34:00.944] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:34:01.044] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:34:01.094] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:34:01.094] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:34:01.094] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:34:01.114] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:34:01.134] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:34:01.134] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:34:01.134] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:34:01.154] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:34:01.204] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:34:01.334] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:34:01.584] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:34:01.584] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:34:01.584] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:34:01.584] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:34:01.634] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:34:01.634] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:34:01.634] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:34:01.634] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:34:01.734] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:02.004] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:34:02.054] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:02.054] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:02.364] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:34:02.414] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:34:02.414] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:02.464] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:34:02.564] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:34:02.664] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:34:02.714] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:34:02.714] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:34:02.714] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:34:02.734] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:34:02.754] (Main Well                        :   0) Stop routine
[2018-01-12 18:34:02.754] (Main Well                        :   0) @Stop
[2018-01-12 18:34:02.834] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:34:02.834] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:34:02.834] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:34:02.834] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:34:02.924] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:34:02.924] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:34:04.834] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:34:04.834] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:34:04.834] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:34:04.834] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:34:04.944] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:34:04.944] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:33:51.174] (Detector                         :  17) @Stop
[2018-01-12 18:34:08.896] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:34:08.896] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:34:08.896] (MainPre Routine                  :   0) @Run
[2018-01-12 18:34:08.896] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:34:15.066] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:34:15.066] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:34:15.066] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:34:15.706] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:34:15.706] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:34:15.716] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:34:17.446] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:34:17.446] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:34:17.446] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:34:17.606] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:34:17.656] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:34:17.676] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:34:17.926] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:34:17.926] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:34:17.926] (Initialize P1                    :   3) @Run
[2018-01-12 18:34:17.926] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:34:17.976] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:34:17.976] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:34:17.976] (Initialize P2                    :   4) @Run
[2018-01-12 18:34:17.976] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:34:18.156] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:18.386] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:18.506] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:34:18.556] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:18.556] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:18.606] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:34:18.656] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:18.656] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:18.846] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:34:18.896] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:18.896] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:18.946] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:34:18.996] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:18.996] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:19.046] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:34:19.096] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:19.096] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:19.146] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:34:19.196] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:19.196] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:19.246] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:34:19.296] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:19.296] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:19.356] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:34:19.406] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:19.406] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:19.476] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:34:19.526] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:19.526] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:19.716] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:34:19.766] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:19.766] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:19.816] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:34:19.866] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:19.866] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:19.916] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:34:19.966] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:19.966] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:20.016] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:34:20.066] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:20.066] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:20.116] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:34:20.166] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:20.166] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:20.216] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:34:20.266] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:20.266] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:20.336] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:34:20.386] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:20.386] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:20.576] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:34:20.626] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:20.626] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:20.676] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:34:20.726] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:34:20.726] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:20.776] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:34:20.826] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:34:20.826] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:34:20.826] (Initialize P1                    :   3) @Stop
[2018-01-12 18:34:20.876] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:34:20.926] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:34:20.926] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:34:20.926] (Initialize P2                    :   4) @Stop
[2018-01-12 18:34:21.176] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:34:21.376] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:34:21.396] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:34:21.396] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:34:21.396] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:34:21.396] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:34:21.396] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:21.396] (PreFillP1                        :   6) @Run
[2018-01-12 18:34:21.396] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:34:21.446] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:34:21.446] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:34:21.446] (PreFillP2                        :   7) @Run
[2018-01-12 18:34:21.446] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:34:21.546] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:21.816] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:21.866] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:34:21.866] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:22.176] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:22.226] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:34:22.226] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:22.476] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:22.526] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:34:22.526] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:22.676] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:22.726] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:34:22.726] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:22.896] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:22.946] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:34:22.946] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:23.236] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:23.286] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:34:23.286] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:23.536] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:23.586] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:34:23.586] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:23.636] (PreFillP1                        :   6) @Stop
[2018-01-12 18:34:23.736] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:23.786] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:34:23.786] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:23.956] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:24.006] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:34:24.006] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:24.196] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:24.246] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:34:24.246] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:24.396] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:24.446] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:34:24.446] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:24.546] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:24.596] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:34:24.596] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:24.746] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:24.796] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:34:24.796] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:25.006] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:25.056] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:34:25.056] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:34:25.056] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:34:25.096] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:34:25.106] (PreFillP2                        :   7) @Stop
[2018-01-12 18:34:25.146] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:34:25.146] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:34:25.146] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:34:25.166] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:25.216] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:34:25.236] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:34:25.486] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:34:25.486] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:25.486] (Flush Capillary                  :   9) @Run
[2018-01-12 18:34:25.486] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:34:25.536] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:34:25.536] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:34:25.536] (Flush Singulator                 :  10) @Run
[2018-01-12 18:34:25.536] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:34:25.636] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:25.886] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:25.936] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:25.936] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:26.086] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:26.136] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:26.136] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:26.306] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:26.356] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:26.356] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:26.646] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:26.696] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:26.696] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:26.946] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:26.996] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:26.996] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:27.146] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:27.196] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:27.196] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:27.376] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:27.426] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:27.426] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:27.716] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:27.766] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:34:27.766] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:27.816] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:34:27.916] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:34:28.016] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:28.066] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:34:28.066] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:34:28.066] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:34:28.096] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:34:28.116] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:34:28.116] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:34:28.116] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:34:28.156] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:28.206] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:34:28.316] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:34:28.566] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:34:28.566] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:28.566] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:34:28.566] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:34:28.616] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:34:28.616] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:34:28.616] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:34:28.616] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:34:28.716] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:28.986] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:29.036] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:29.036] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:29.346] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:29.396] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:29.396] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:29.646] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:29.696] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:29.696] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:29.846] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:29.896] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:29.896] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:30.066] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:30.116] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:30.116] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:30.166] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:34:30.406] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:30.456] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:34:30.456] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:30.506] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:34:30.606] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:30.656] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:34:30.656] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:34:30.656] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:34:30.666] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:34:30.666] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:34:30.666] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:34:30.666] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:34:30.666] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:34:30.666] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:34:30.666] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:30.666] (PreFillP1                        :   6) @Run
[2018-01-12 18:34:30.666] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:34:30.716] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:34:30.716] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:34:30.716] (PreFillP2                        :   7) @Run
[2018-01-12 18:34:30.716] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:34:30.816] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:31.106] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:31.156] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:34:31.156] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:31.456] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:31.506] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:34:31.506] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:31.656] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:31.706] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:34:31.706] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:31.856] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:31.906] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:34:31.906] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:32.216] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:32.266] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:34:32.266] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:32.516] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:32.566] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:34:32.566] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:32.716] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:32.766] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:34:32.766] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:33.076] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:33.126] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:34:33.126] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:33.176] (PreFillP1                        :   6) @Stop
[2018-01-12 18:34:33.376] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:33.426] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:34:33.426] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:33.526] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:33.576] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:34:33.576] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:33.746] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:33.796] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:34:33.796] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:33.986] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:34.036] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:34:34.036] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:34.186] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:34.236] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:34:34.236] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:34.336] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:34:34.386] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:34:34.386] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:34:34.386] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:34:34.416] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:34:34.436] (PreFillP2                        :   7) @Stop
[2018-01-12 18:34:34.496] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:34:34.496] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:34:34.496] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:34:34.656] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:34.706] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:34:34.726] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:34:34.976] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:34:34.976] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:34.976] (Flush Capillary                  :   9) @Run
[2018-01-12 18:34:34.976] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:34:35.026] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:34:35.026] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:34:35.026] (Flush Singulator                 :  10) @Run
[2018-01-12 18:34:35.026] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:34:35.126] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:35.406] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:35.456] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:35.456] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:35.766] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:35.816] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:35.816] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:36.066] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:36.116] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:36.116] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:36.266] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:36.316] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:36.316] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:36.486] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:36.536] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:36.536] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:36.826] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:36.876] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:36.876] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:37.026] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:34:37.126] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:37.176] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:34:37.176] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:37.226] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:34:37.326] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:34:37.376] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:34:37.376] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:34:37.376] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:34:37.396] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:34:37.506] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:34:37.506] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:34:37.506] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:34:37.526] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:37.576] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:34:37.596] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:34:37.846] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:34:37.846] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:37.846] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:34:37.846] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:34:37.896] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:34:37.896] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:34:37.896] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:34:37.896] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:34:37.996] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:38.286] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:38.336] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:38.336] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:38.626] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:38.676] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:38.676] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:38.826] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:38.876] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:38.876] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:39.026] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:39.076] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:34:39.076] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:39.396] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:39.446] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:34:39.446] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:39.496] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:34:39.596] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:34:39.696] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:34:39.746] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:34:39.746] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:34:39.746] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:34:39.756] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:34:39.756] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:34:39.756] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:34:39.756] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:34:39.756] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:34:39.756] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:34:39.756] (Prefill before Flush             :  14) @Run
[2018-01-12 18:34:39.756] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:34:39.756] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:34:39.756] (PreFillP1                        :  15) @Run
[2018-01-12 18:34:39.756] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:34:39.806] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:34:39.806] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:34:39.806] (PreFillP2                        :  16) @Run
[2018-01-12 18:34:39.806] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:34:39.906] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:40.336] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:34:40.386] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:34:40.386] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:40.436] (PreFillP1                        :  15) @Stop
[2018-01-12 18:34:40.536] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:34:40.586] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:34:40.586] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:34:40.586] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:34:40.606] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:34:40.636] (PreFillP2                        :  16) @Stop
[2018-01-12 18:34:40.656] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:34:40.656] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:33:51.174] (Detector                         :   2) @Stop
[2018-01-12 18:34:40.966] ** STARTING D03 MAIN ROUTINE **
[2018-01-12 18:34:40.966] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:34:40.966] (Main Well                        :   0) @Run
[2018-01-12 18:34:40.966] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:34:40.966] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:34:40.966] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:34:40.966] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:34:40.966] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:34:40.966] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:34:40.966] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:34:40.966] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:34:40.966] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:34:40.966] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:34:41.476] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:34:41.476] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:34:41.516] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:34:41.636] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:34:41.636] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:34:41.636] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:34:41.636] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:34:41.636] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:34:41.636] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:34:41.636] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:34:41.636] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:34:41.636] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:34:41.636] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:34:41.656] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:34:41.706] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:34:41.726] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:34:41.976] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:34:41.976] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:34:41.976] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:34:41.976] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:34:42.026] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:34:42.026] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:34:42.026] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:34:42.026] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:34:42.126] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:42.396] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:34:42.446] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:34:42.446] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:42.756] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:34:42.806] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:34:42.806] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:43.056] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:34:43.106] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:34:43.106] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:43.256] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:34:43.306] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:34:43.306] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:43.356] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:34:43.476] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:34:43.526] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:34:43.526] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:43.576] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:34:43.816] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:34:43.866] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:34:43.866] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:34:43.866] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:34:43.866] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:34:43.866] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:34:43.926] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:34:43.976] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:34:44.036] (Main Well                        :   0) Move to Well 39 with z-offset of 2540 um (Wait)
[2018-01-12 18:34:46.616] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:34:46.856] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:34:46.906] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:34:46.906] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:47.006] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:34:47.056] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:34:47.056] (Main Well                        :   0) Stop Pump
[2018-01-12 18:34:47.096] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:34:47.156] (Main Well                        :   0) Move to Well 39 with z-offset of 310 um (Wait)
[2018-01-12 18:34:55.926] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:34:56.166] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:34:56.216] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:34:56.216] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:34:56.216] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:34:56.216] (Pickup Sample                    :  21) @Run
[2018-01-12 18:34:56.216] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:35:00.886] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:35:03.326] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:35:03.406] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:35:03.606] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:03.706] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:03.756] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:03.756] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:03.856] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:03.906] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:03.906] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:04.006] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:04.056] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:04.056] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:04.166] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:04.216] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:04.216] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:04.406] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:04.456] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:04.456] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:04.556] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:04.606] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:04.606] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:04.706] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:04.756] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:04.756] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:04.856] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:04.906] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:04.906] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:05.116] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:05.166] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:05.166] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:05.266] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:05.316] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:05.316] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:05.416] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:05.466] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:05.466] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:05.566] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:05.616] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:05.616] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:05.826] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:05.876] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:05.876] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:05.976] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:06.026] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:06.026] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:06.126] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:06.176] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:06.176] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:06.277] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:06.327] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:06.327] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:06.537] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:06.587] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:06.587] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:06.687] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:06.737] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:06.737] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:06.837] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:06.887] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:06.887] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:06.987] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:07.037] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:07.037] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:07.247] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:07.297] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:07.297] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:07.397] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:07.447] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:07.447] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:07.547] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:07.597] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:07.597] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:07.697] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:07.747] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:07.747] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:07.957] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:08.007] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:08.007] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:08.107] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:08.157] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:08.157] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:08.257] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:08.307] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:08.307] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:08.407] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:08.457] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:08.457] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:08.667] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:08.717] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:08.717] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:08.817] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:08.867] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:08.867] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:08.967] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:09.017] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:09.017] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:09.117] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:09.167] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:09.167] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:09.387] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:09.437] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:09.437] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:09.537] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:09.587] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:09.587] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:09.687] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:09.737] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:09.737] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:09.837] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:09.887] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:09.887] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:10.097] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:10.147] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:10.147] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:10.247] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:10.297] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:10.297] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:10.397] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:10.447] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:10.447] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:10.547] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:10.597] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:10.597] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:10.807] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:10.857] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:10.857] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:10.957] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:11.007] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:11.007] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:11.107] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:11.157] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:11.157] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:11.257] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:11.307] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:11.307] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:11.517] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:11.567] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:11.567] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:11.667] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:11.717] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:11.717] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:11.817] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:11.867] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:11.867] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:11.967] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:12.017] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:12.017] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:12.227] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:12.277] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:12.277] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:12.377] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:12.427] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:12.427] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:12.527] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:12.577] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:12.577] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:12.677] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:12.727] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:12.727] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:12.937] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:12.987] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:35:12.987] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:35:13.087] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:35:13.137] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:35:13.137] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:35:13.137] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:35:13.417] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:35:13.517] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:35:13.767] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:35:13.787] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:35:13.837] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:35:13.837] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:35:13.837] (Singulate Sample                 :  22) @Run
[2018-01-12 18:35:13.837] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:35:13.837] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:35:13.837] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:35:13.897] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:35:13.947] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:35:14.007] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:35:14.107] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_D03_RAW.qlb"
[2018-01-12 18:35:14.217] (Detector                         :   2) @Run
[2018-01-12 18:35:14.217] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:35:54.117] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:35:55.057] (Detector                         :   2) @Stop
[2018-01-12 18:35:55.117] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:35:55.117] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:55.237] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:35:55.287] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:35:55.287] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:35:55.387] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:35:55.437] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:35:55.437] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:35:55.437] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:35:55.637] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:35:55.637] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:35:55.637] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:35:55.637] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:35:55.637] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:35:55.637] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:35:55.637] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:55.637] (PreFillP1                        :  24) @Run
[2018-01-12 18:35:55.637] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:35:55.687] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:35:55.687] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:35:55.687] (PreFillP2                        :  25) @Run
[2018-01-12 18:35:55.687] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:35:55.787] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:35:56.117] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:56.167] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:56.167] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:35:56.337] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:56.387] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:56.387] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:35:56.557] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:56.607] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:56.607] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:35:56.897] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:56.947] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:56.947] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:35:57.197] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:57.247] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:57.247] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:35:57.407] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:57.457] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:57.457] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:35:57.627] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:57.677] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:57.677] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:35:57.967] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:58.017] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:58.017] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:35:58.267] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:58.317] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:58.317] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:35:58.467] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:58.517] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:35:58.517] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:35:58.687] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:58.737] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:35:58.737] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:59.027] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:59.077] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:35:59.077] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:59.127] (PreFillP1                        :  24) @Stop
[2018-01-12 18:35:59.327] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:59.377] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:35:59.377] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:59.477] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:59.527] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:35:59.527] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:35:59.597] (PreFillP2                        :  25) @Stop
[2018-01-12 18:35:59.837] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:35:59.887] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:35:59.887] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:35:59.887] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:35:59.937] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:35:59.937] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:35:59.937] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:35:59.957] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:36:00.007] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:36:00.027] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:36:00.277] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:36:00.277] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:36:00.277] (Flush Capillary                  :  27) @Run
[2018-01-12 18:36:00.277] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:36:00.327] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:36:00.327] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:36:00.327] (Flush Singulator                 :  28) @Run
[2018-01-12 18:36:00.327] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:36:00.427] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:00.617] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:36:00.667] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:00.667] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:00.917] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:36:00.967] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:00.967] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:01.277] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:36:01.327] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:01.327] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:01.577] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:36:01.627] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:01.627] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:01.777] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:36:01.827] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:36:01.827] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:01.877] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:36:01.997] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:36:02.047] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:36:02.047] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:36:02.047] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:36:02.087] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:36:02.097] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:36:02.257] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:36:02.257] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:36:02.257] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:36:02.277] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:36:02.327] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:36:02.347] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:36:02.597] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:36:02.597] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:36:02.597] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:36:02.597] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:36:02.647] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:36:02.647] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:36:02.647] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:36:02.647] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:36:02.747] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:03.037] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:36:03.087] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:03.087] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:03.377] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:36:03.427] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:36:03.427] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:03.477] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:36:03.577] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:36:03.627] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:36:03.627] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:36:03.627] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:36:03.657] (Main Well                        :   0) Stop Pump
[2018-01-12 18:36:03.677] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:36:03.717] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:36:03.717] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:36:03.717] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:36:03.757] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:36:03.807] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:36:03.917] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:36:04.167] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:36:04.167] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:36:04.167] (Flush Capillary                  :  33) @Run
[2018-01-12 18:36:04.167] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:36:04.217] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:36:04.217] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:36:04.217] (Flush Singulator                 :  34) @Run
[2018-01-12 18:36:04.217] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:36:04.317] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:04.587] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:36:04.637] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:04.637] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:04.947] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:36:04.997] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:36:04.997] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:05.047] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:36:05.147] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:36:05.247] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:36:05.297] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:36:05.297] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:36:05.297] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:36:05.317] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:36:05.337] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:36:05.337] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:36:05.337] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:36:05.357] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:36:05.407] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:36:05.537] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:36:05.787] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:36:05.787] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:36:05.787] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:36:05.787] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:36:05.837] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:36:05.837] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:36:05.837] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:36:05.837] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:36:05.937] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:06.207] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:36:06.257] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:06.257] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:06.567] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:36:06.617] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:36:06.617] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:06.667] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:36:06.767] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:36:06.867] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:36:06.917] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:36:06.917] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:36:06.917] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:36:06.937] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:36:06.957] (Main Well                        :   0) Stop routine
[2018-01-12 18:36:06.957] (Main Well                        :   0) @Stop
[2018-01-12 18:36:07.037] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:36:07.037] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:36:07.057] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:36:07.057] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:36:07.137] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:36:07.137] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:36:09.037] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:36:09.037] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:36:09.037] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:36:09.037] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:36:09.157] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:36:09.157] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:35:55.057] (Detector                         :  17) @Stop
[2018-01-12 18:36:14.217] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:36:14.217] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:36:14.217] (MainPre Routine                  :   0) @Run
[2018-01-12 18:36:14.217] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:36:20.237] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:36:20.237] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:36:20.237] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:36:20.877] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:36:20.877] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:36:20.887] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:36:22.617] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:36:22.617] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:36:22.617] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:36:22.777] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:36:22.827] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:36:22.847] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:36:23.097] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:36:23.097] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:36:23.097] (Initialize P1                    :   3) @Run
[2018-01-12 18:36:23.097] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:36:23.147] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:36:23.147] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:36:23.147] (Initialize P2                    :   4) @Run
[2018-01-12 18:36:23.147] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:36:23.337] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:23.567] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:23.687] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:36:23.737] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:23.737] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:23.787] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:36:23.837] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:23.837] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:24.027] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:36:24.077] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:24.077] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:24.127] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:36:24.177] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:24.177] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:24.227] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:36:24.277] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:24.277] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:24.327] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:36:24.377] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:24.377] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:24.427] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:36:24.477] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:24.477] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:24.527] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:36:24.577] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:24.577] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:24.647] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:36:24.697] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:24.697] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:24.887] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:36:24.937] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:24.937] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:24.987] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:36:25.037] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:25.037] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:25.087] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:36:25.137] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:25.137] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:25.187] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:36:25.237] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:25.237] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:25.287] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:36:25.337] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:25.337] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:25.387] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:36:25.437] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:25.437] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:25.507] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:36:25.557] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:25.557] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:25.747] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:36:25.797] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:36:25.797] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:36:25.797] (Initialize P1                    :   3) @Stop
[2018-01-12 18:36:25.847] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:36:25.897] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:36:25.897] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:25.997] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:36:26.047] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:36:26.047] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:36:26.047] (Initialize P2                    :   4) @Stop
[2018-01-12 18:36:26.147] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:36:26.347] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:36:26.367] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:36:26.367] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:36:26.367] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:36:26.367] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:36:26.367] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:26.367] (PreFillP1                        :   6) @Run
[2018-01-12 18:36:26.367] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:36:26.417] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:36:26.417] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:36:26.417] (PreFillP2                        :   7) @Run
[2018-01-12 18:36:26.417] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:36:26.517] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:26.787] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:26.837] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:26.837] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:27.007] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:27.057] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:27.057] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:27.347] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:27.397] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:27.397] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:27.647] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:27.697] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:27.697] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:27.847] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:27.897] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:27.897] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:28.067] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:28.117] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:28.117] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:28.417] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:28.467] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:28.467] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:28.617] (PreFillP1                        :   6) @Stop
[2018-01-12 18:36:28.717] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:28.767] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:36:28.767] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:28.917] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:28.967] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:36:28.967] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:29.177] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:29.227] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:36:29.227] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:29.377] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:29.427] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:36:29.427] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:29.527] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:29.577] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:36:29.577] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:29.727] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:29.777] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:36:29.777] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:29.987] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:30.037] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:36:30.037] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:36:30.037] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:36:30.067] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:36:30.087] (PreFillP2                        :   7) @Stop
[2018-01-12 18:36:30.127] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:36:30.127] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:36:30.127] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:36:30.147] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:30.197] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:36:30.217] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:36:30.467] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:36:30.467] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:30.467] (Flush Capillary                  :   9) @Run
[2018-01-12 18:36:30.467] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:36:30.517] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:36:30.517] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:36:30.517] (Flush Singulator                 :  10) @Run
[2018-01-12 18:36:30.517] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:36:30.617] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:30.867] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:30.917] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:30.917] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:31.067] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:31.117] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:31.117] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:31.287] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:31.337] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:31.337] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:31.627] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:31.677] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:31.677] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:31.927] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:31.977] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:31.977] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:32.127] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:32.177] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:32.177] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:32.487] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:32.537] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:32.537] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:32.587] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:36:32.687] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:36:32.787] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:32.837] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:36:32.837] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:32.937] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:32.987] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:36:32.987] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:36:32.987] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:36:33.027] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:36:33.117] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:36:33.117] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:36:33.117] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:36:33.137] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:33.187] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:36:33.207] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:36:33.457] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:36:33.457] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:33.457] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:36:33.457] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:36:33.507] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:36:33.507] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:36:33.507] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:36:33.507] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:36:33.607] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:33.897] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:33.947] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:33.947] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:34.237] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:34.287] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:34.287] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:34.437] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:34.487] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:34.487] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:34.637] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:34.687] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:34.687] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:34.857] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:34.907] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:34.907] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:34.957] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:36:35.197] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:35.247] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:36:35.247] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:35.297] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:36:35.397] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:35.447] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:36:35.447] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:36:35.447] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:36:35.467] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:36:35.467] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:36:35.467] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:36:35.467] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:36:35.467] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:36:35.467] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:36:35.467] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:35.467] (PreFillP1                        :   6) @Run
[2018-01-12 18:36:35.467] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:36:35.517] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:36:35.517] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:36:35.517] (PreFillP2                        :   7) @Run
[2018-01-12 18:36:35.517] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:36:35.617] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:35.907] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:35.957] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:35.957] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:36.247] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:36.297] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:36.297] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:36.447] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:36.497] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:36.497] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:36.647] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:36.697] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:36.697] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:36.867] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:36.917] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:36.917] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:37.207] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:37.257] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:37.257] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:37.507] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:37.557] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:37.557] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:37.707] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:37.757] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:36:37.757] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:37.807] (PreFillP1                        :   6) @Stop
[2018-01-12 18:36:37.927] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:37.977] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:36:37.977] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:38.267] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:38.317] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:36:38.317] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:38.467] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:38.517] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:36:38.517] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:38.617] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:38.667] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:36:38.667] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:38.817] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:38.867] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:36:38.867] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:39.077] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:36:39.127] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:36:39.127] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:36:39.127] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:36:39.167] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:36:39.177] (PreFillP2                        :   7) @Stop
[2018-01-12 18:36:39.217] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:36:39.217] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:36:39.217] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:36:39.237] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:39.287] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:36:39.307] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:36:39.557] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:36:39.557] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:39.557] (Flush Capillary                  :   9) @Run
[2018-01-12 18:36:39.557] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:36:39.607] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:36:39.607] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:36:39.607] (Flush Singulator                 :  10) @Run
[2018-01-12 18:36:39.607] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:36:39.707] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:39.957] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:40.007] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:40.007] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:40.157] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:40.207] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:40.207] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:40.377] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:40.427] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:40.427] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:40.717] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:40.767] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:40.767] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:41.017] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:41.067] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:41.067] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:41.217] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:41.267] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:41.267] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:41.437] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:41.487] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:41.487] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:41.777] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:41.827] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:36:41.827] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:41.877] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:36:41.977] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:36:42.077] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:36:42.127] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:36:42.127] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:36:42.127] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:36:42.167] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:36:42.187] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:36:42.187] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:36:42.187] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:36:42.227] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:42.277] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:36:42.397] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:36:42.647] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:36:42.647] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:42.647] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:36:42.647] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:36:42.697] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:36:42.697] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:36:42.697] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:36:42.697] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:36:42.797] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:43.067] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:43.117] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:43.117] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:43.427] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:43.477] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:43.477] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:43.727] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:43.777] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:43.777] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:43.927] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:43.977] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:43.977] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:44.147] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:44.197] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:36:44.197] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:44.247] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:36:44.487] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:44.537] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:36:44.537] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:44.587] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:36:44.687] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:36:44.737] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:36:44.737] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:36:44.737] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:36:44.787] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:36:44.787] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:36:44.787] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:36:44.787] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:36:44.787] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:36:44.787] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:36:44.787] (Prefill before Flush             :  14) @Run
[2018-01-12 18:36:44.787] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:36:44.787] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:36:44.787] (PreFillP1                        :  15) @Run
[2018-01-12 18:36:44.787] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:36:44.837] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:36:44.837] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:36:44.837] (PreFillP2                        :  16) @Run
[2018-01-12 18:36:44.837] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:36:44.937] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:45.227] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:36:45.277] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:36:45.277] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:45.467] (PreFillP1                        :  15) @Stop
[2018-01-12 18:36:45.567] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:36:45.617] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:36:45.617] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:45.667] (PreFillP2                        :  16) @Stop
[2018-01-12 18:36:45.767] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:36:45.817] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:36:45.817] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:36:45.817] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:36:45.837] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:36:45.857] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:36:45.857] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:35:55.057] (Detector                         :   2) @Stop
[2018-01-12 18:36:46.297] ** STARTING E03 MAIN ROUTINE **
[2018-01-12 18:36:46.297] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:36:46.297] (Main Well                        :   0) @Run
[2018-01-12 18:36:46.297] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:36:46.297] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:36:46.297] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:36:46.297] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:36:46.297] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:36:46.297] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:36:46.297] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:36:46.297] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:36:46.297] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:36:46.297] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:36:46.797] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:36:46.797] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:36:46.847] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:36:46.957] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:36:46.957] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:36:46.957] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:36:46.957] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:36:46.957] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:36:46.957] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:36:46.957] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:36:46.957] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:36:46.957] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:36:46.957] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:36:46.977] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:36:47.027] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:36:47.047] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:36:47.297] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:36:47.297] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:36:47.297] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:36:47.297] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:36:47.347] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:36:47.347] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:36:47.347] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:36:47.347] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:36:47.447] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:47.717] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:36:47.767] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:36:47.767] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:48.077] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:36:48.127] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:36:48.127] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:48.377] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:36:48.427] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:36:48.427] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:48.577] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:36:48.627] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:36:48.627] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:48.677] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:36:48.797] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:36:48.847] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:36:48.847] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:48.897] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:36:49.137] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:36:49.187] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:36:49.187] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:36:49.187] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:36:49.187] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:36:49.187] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:36:49.247] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:36:49.297] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:36:49.357] (Main Well                        :   0) Move to Well 51 with z-offset of 2540 um (Wait)
[2018-01-12 18:36:52.277] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:36:52.517] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:36:52.567] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:36:52.567] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:36:52.667] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:36:52.717] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:36:52.717] (Main Well                        :   0) Stop Pump
[2018-01-12 18:36:52.757] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:36:52.817] (Main Well                        :   0) Move to Well 51 with z-offset of 310 um (Wait)
[2018-01-12 18:37:01.697] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:01.937] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:37:01.987] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:37:01.987] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:37:01.987] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:37:01.987] (Pickup Sample                    :  21) @Run
[2018-01-12 18:37:01.987] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:37:06.657] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:37:09.277] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:37:09.357] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:37:09.557] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:09.657] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:09.707] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:09.707] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:09.807] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:09.857] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:09.857] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:09.957] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:10.007] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:10.007] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:10.117] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:10.167] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:10.167] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:10.367] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:10.417] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:10.417] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:10.517] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:10.567] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:10.567] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:10.667] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:10.717] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:10.717] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:10.817] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:10.867] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:10.867] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:11.077] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:11.127] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:11.127] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:11.227] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:11.277] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:11.277] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:11.377] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:11.427] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:11.427] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:11.527] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:11.577] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:11.577] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:11.787] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:11.837] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:11.837] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:11.937] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:11.987] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:11.987] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:12.087] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:12.137] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:12.137] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:12.237] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:12.287] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:12.287] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:12.497] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:12.547] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:12.547] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:12.647] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:12.697] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:12.697] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:12.797] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:12.847] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:12.847] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:12.947] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:12.997] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:12.997] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:13.207] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:13.257] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:13.257] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:13.357] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:13.407] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:13.407] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:13.507] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:13.557] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:13.557] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:13.657] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:13.707] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:13.707] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:13.917] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:13.967] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:13.967] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:14.067] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:14.117] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:14.117] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:14.217] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:14.267] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:14.267] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:14.367] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:14.417] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:14.417] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:14.627] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:14.677] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:14.677] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:14.777] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:14.827] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:14.827] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:14.927] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:14.977] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:14.977] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:15.077] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:15.127] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:15.127] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:15.337] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:15.387] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:15.387] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:15.487] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:15.537] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:15.537] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:15.637] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:15.687] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:15.687] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:15.787] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:15.837] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:15.837] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:16.047] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:16.097] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:16.097] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:16.197] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:16.247] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:16.247] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:16.347] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:16.397] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:16.397] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:16.497] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:16.547] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:16.547] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:16.757] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:16.807] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:16.807] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:16.907] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:16.957] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:16.957] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:17.057] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:17.107] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:17.107] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:17.207] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:17.257] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:17.257] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:17.467] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:17.517] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:17.517] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:17.617] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:17.667] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:17.667] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:17.767] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:17.817] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:17.817] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:17.917] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:17.967] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:17.967] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:18.177] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:18.227] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:18.227] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:18.327] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:18.377] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:18.377] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:18.477] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:18.527] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:18.527] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:18.627] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:18.677] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:37:18.677] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:37:18.887] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:18.937] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:37:18.937] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:37:19.037] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:37:19.087] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:37:19.087] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:37:19.087] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:37:19.387] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:37:19.467] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:37:19.717] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:37:19.737] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:37:19.787] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:37:19.787] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:37:19.787] (Singulate Sample                 :  22) @Run
[2018-01-12 18:37:19.787] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:37:19.787] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:37:19.787] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:37:19.847] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:37:19.897] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:37:19.957] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:37:20.057] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_E03_RAW.qlb"
[2018-01-12 18:37:20.167] (Detector                         :   2) @Run
[2018-01-12 18:37:20.167] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:38:00.067] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:38:01.167] (Detector                         :   2) @Stop
[2018-01-12 18:38:01.267] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:38:01.267] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:01.377] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:38:01.427] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:38:01.427] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:01.527] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:38:01.577] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:38:01.577] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:38:01.577] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:38:01.787] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:38:01.787] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:38:01.787] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:38:01.787] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:38:01.787] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:38:01.787] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:38:01.787] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:01.787] (PreFillP1                        :  24) @Run
[2018-01-12 18:38:01.787] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:38:01.837] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:38:01.837] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:38:01.837] (PreFillP2                        :  25) @Run
[2018-01-12 18:38:01.837] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:38:01.937] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:02.217] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:02.267] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:02.267] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:02.417] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:02.467] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:02.467] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:02.777] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:02.827] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:02.827] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:03.077] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:03.127] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:03.127] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:03.277] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:03.327] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:03.327] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:03.497] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:03.547] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:03.547] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:03.837] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:03.887] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:03.887] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:04.137] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:04.187] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:04.187] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:04.337] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:04.387] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:04.387] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:04.557] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:04.607] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:04.607] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:04.897] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:04.947] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:38:04.947] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:04.997] (PreFillP1                        :  24) @Stop
[2018-01-12 18:38:05.197] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:05.247] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:38:05.247] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:05.347] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:05.397] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:38:05.397] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:05.567] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:38:05.617] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:38:05.617] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:38:05.617] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:38:05.637] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:38:05.637] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:38:05.637] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:38:05.727] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:38:05.777] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:38:05.827] (PreFillP2                        :  25) @Stop
[2018-01-12 18:38:05.847] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:38:06.097] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:38:06.097] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:38:06.097] (Flush Capillary                  :  27) @Run
[2018-01-12 18:38:06.097] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:38:06.147] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:38:06.147] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:38:06.147] (Flush Singulator                 :  28) @Run
[2018-01-12 18:38:06.147] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:38:06.247] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:06.537] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:38:06.587] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:06.587] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:06.877] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:38:06.927] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:06.927] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:07.079] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:38:07.129] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:07.129] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:07.279] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:38:07.329] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:07.329] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:07.499] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:38:07.549] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:38:07.549] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:07.599] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:38:07.839] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:38:07.889] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:38:07.889] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:38:07.889] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:38:07.939] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:38:07.939] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:38:07.959] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:38:07.959] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:38:07.959] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:38:07.979] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:38:08.029] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:38:08.049] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:38:08.299] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:38:08.299] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:38:08.299] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:38:08.299] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:38:08.349] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:38:08.349] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:38:08.349] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:38:08.349] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:38:08.449] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:08.619] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:38:08.669] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:08.669] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:08.919] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:38:08.969] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:08.969] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:09.279] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:38:09.329] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:38:09.329] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:09.379] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:38:09.479] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:38:09.579] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:38:09.629] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:38:09.629] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:38:09.629] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:38:09.659] (Main Well                        :   0) Stop Pump
[2018-01-12 18:38:09.699] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:38:09.699] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:38:09.699] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:38:09.739] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:38:09.789] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:38:09.899] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:38:10.149] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:38:10.149] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:38:10.149] (Flush Capillary                  :  33) @Run
[2018-01-12 18:38:10.149] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:38:10.199] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:38:10.199] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:38:10.199] (Flush Singulator                 :  34) @Run
[2018-01-12 18:38:10.199] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:38:10.299] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:10.569] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:38:10.619] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:10.619] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:10.929] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:38:10.979] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:38:10.979] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:11.029] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:38:11.129] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:38:11.229] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:38:11.279] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:38:11.279] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:38:11.279] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:38:11.299] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:38:11.319] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:38:11.319] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:38:11.319] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:38:11.339] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:38:11.389] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:38:11.519] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:38:11.769] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:38:11.769] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:38:11.769] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:38:11.769] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:38:11.819] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:38:11.819] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:38:11.819] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:38:11.819] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:38:11.919] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:12.189] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:38:12.239] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:12.239] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:12.549] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:38:12.599] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:38:12.599] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:12.649] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:38:12.749] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:38:12.849] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:38:12.899] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:38:12.899] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:38:12.899] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:38:12.919] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:38:12.939] (Main Well                        :   0) Stop routine
[2018-01-12 18:38:12.939] (Main Well                        :   0) @Stop
[2018-01-12 18:38:13.389] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:38:13.389] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:38:13.399] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:38:13.399] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:38:13.399] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:38:13.399] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:38:15.389] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:38:15.389] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:38:15.389] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:38:15.389] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:38:15.429] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:38:15.429] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:38:01.167] (Detector                         :  17) @Stop
[2018-01-12 18:38:22.769] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:38:22.769] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:38:22.769] (MainPre Routine                  :   0) @Run
[2018-01-12 18:38:22.769] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:38:28.829] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:38:28.829] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:38:28.829] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:38:29.469] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:38:29.469] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:38:29.479] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:38:31.219] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:38:31.219] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:38:31.219] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:38:31.379] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:38:31.429] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:38:31.449] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:38:31.699] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:38:31.699] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:38:31.699] (Initialize P1                    :   3) @Run
[2018-01-12 18:38:31.699] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:38:31.749] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:38:31.749] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:38:31.749] (Initialize P2                    :   4) @Run
[2018-01-12 18:38:31.749] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:38:31.929] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:32.159] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:32.279] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:38:32.329] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:32.329] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:32.379] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:38:32.429] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:32.429] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:32.619] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:38:32.669] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:32.669] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:32.719] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:38:32.769] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:32.769] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:32.819] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:38:32.869] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:32.869] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:32.919] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:38:32.969] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:32.969] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:33.019] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:38:33.069] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:33.069] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:33.119] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:38:33.169] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:33.169] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:33.239] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:38:33.289] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:33.289] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:33.479] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:38:33.529] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:33.529] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:33.579] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:38:33.629] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:33.629] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:33.679] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:38:33.729] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:33.729] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:33.779] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:38:33.829] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:33.829] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:33.879] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:38:33.929] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:33.929] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:33.979] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:38:34.029] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:34.029] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:34.099] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:38:34.149] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:34.149] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:34.339] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:38:34.389] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:34.389] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:34.439] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:38:34.489] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:38:34.489] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:34.539] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:38:34.589] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:38:34.589] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:38:34.589] (Initialize P1                    :   3) @Stop
[2018-01-12 18:38:34.639] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:38:34.689] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:38:34.689] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:38:34.689] (Initialize P2                    :   4) @Stop
[2018-01-12 18:38:34.949] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:38:35.149] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:38:35.169] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:38:35.169] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:38:35.169] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:38:35.169] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:38:35.169] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:35.169] (PreFillP1                        :   6) @Run
[2018-01-12 18:38:35.169] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:38:35.219] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:38:35.219] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:38:35.219] (PreFillP2                        :   7) @Run
[2018-01-12 18:38:35.219] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:38:35.319] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:35.589] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:35.639] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:35.639] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:35.949] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:35.999] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:35.999] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:36.249] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:36.299] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:36.299] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:36.449] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:36.499] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:36.499] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:36.669] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:36.719] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:36.719] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:37.009] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:37.059] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:37.059] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:37.309] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:37.359] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:38:37.359] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:37.409] (PreFillP1                        :   6) @Stop
[2018-01-12 18:38:37.509] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:37.559] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:38:37.559] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:37.729] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:37.779] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:38:37.779] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:37.969] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:38.019] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:38:38.019] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:38.169] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:38.219] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:38:38.219] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:38.319] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:38.369] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:38:38.369] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:38.519] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:38.569] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:38:38.569] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:38.779] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:38.829] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:38:38.829] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:38:38.829] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:38:38.869] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:38:38.879] (PreFillP2                        :   7) @Stop
[2018-01-12 18:38:38.919] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:38:38.919] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:38:38.919] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:38:38.939] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:38.989] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:38:39.009] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:38:39.259] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:38:39.259] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:39.259] (Flush Capillary                  :   9) @Run
[2018-01-12 18:38:39.259] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:38:39.309] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:38:39.309] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:38:39.309] (Flush Singulator                 :  10) @Run
[2018-01-12 18:38:39.309] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:38:39.409] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:39.659] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:39.709] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:39.709] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:39.859] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:39.909] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:39.909] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:40.079] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:40.129] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:40.129] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:40.419] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:40.469] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:40.469] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:40.719] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:40.769] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:40.769] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:40.919] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:40.969] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:40.969] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:41.139] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:41.189] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:41.189] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:41.479] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:41.529] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:38:41.529] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:41.579] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:38:41.679] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:38:41.779] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:41.829] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:38:41.829] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:38:41.829] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:38:41.869] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:38:41.889] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:38:41.889] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:38:41.889] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:38:41.929] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:41.979] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:38:42.089] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:38:42.339] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:38:42.339] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:42.339] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:38:42.339] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:38:42.389] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:38:42.389] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:38:42.389] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:38:42.389] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:38:42.489] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:42.759] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:42.809] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:42.809] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:43.119] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:43.169] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:43.169] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:43.419] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:43.469] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:43.469] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:43.619] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:43.669] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:43.669] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:43.839] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:43.889] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:43.889] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:43.939] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:38:44.179] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:44.229] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:38:44.229] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:44.279] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:38:44.379] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:44.429] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:38:44.429] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:38:44.429] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:38:44.439] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:38:44.439] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:38:44.439] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:38:44.439] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:38:44.439] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:38:44.439] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:38:44.439] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:44.439] (PreFillP1                        :   6) @Run
[2018-01-12 18:38:44.439] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:38:44.489] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:38:44.489] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:38:44.489] (PreFillP2                        :   7) @Run
[2018-01-12 18:38:44.489] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:38:44.589] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:44.879] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:44.929] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:44.929] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:45.219] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:45.269] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:45.269] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:45.419] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:45.469] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:45.469] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:45.619] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:45.669] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:45.669] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:45.839] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:45.889] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:45.889] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:46.179] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:46.229] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:46.229] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:46.479] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:46.529] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:38:46.529] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:46.679] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:46.729] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:38:46.729] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:46.779] (PreFillP1                        :   6) @Stop
[2018-01-12 18:38:46.899] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:46.949] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:38:46.949] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:47.239] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:47.289] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:38:47.289] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:47.439] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:47.489] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:38:47.489] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:47.589] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:47.639] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:38:47.639] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:47.789] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:47.839] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:38:47.839] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:48.049] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:38:48.099] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:38:48.099] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:38:48.099] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:38:48.139] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:38:48.149] (PreFillP2                        :   7) @Stop
[2018-01-12 18:38:48.189] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:38:48.189] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:38:48.189] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:38:48.209] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:48.259] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:38:48.279] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:38:48.529] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:38:48.529] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:48.529] (Flush Capillary                  :   9) @Run
[2018-01-12 18:38:48.529] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:38:48.579] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:38:48.579] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:38:48.579] (Flush Singulator                 :  10) @Run
[2018-01-12 18:38:48.579] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:38:48.679] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:48.929] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:48.979] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:48.979] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:49.129] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:49.179] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:49.179] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:49.349] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:49.399] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:49.399] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:49.689] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:49.739] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:49.739] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:49.989] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:50.039] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:50.039] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:50.189] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:50.239] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:50.239] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:50.409] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:50.459] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:50.459] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:50.749] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:50.799] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:38:50.799] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:50.849] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:38:50.949] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:38:51.049] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:38:51.099] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:38:51.099] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:38:51.099] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:38:51.139] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:38:51.159] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:38:51.159] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:38:51.159] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:38:51.199] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:51.249] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:38:51.359] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:38:51.609] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:38:51.609] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:51.609] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:38:51.609] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:38:51.659] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:38:51.659] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:38:51.659] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:38:51.659] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:38:51.759] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:52.029] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:52.079] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:52.079] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:52.389] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:52.439] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:52.439] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:52.689] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:52.739] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:52.739] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:52.889] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:52.939] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:38:52.939] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:53.249] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:53.299] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:38:53.299] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:53.349] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:38:53.449] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:38:53.549] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:38:53.599] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:38:53.599] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:38:53.599] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:38:53.609] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:38:53.609] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:38:53.609] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:38:53.609] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:38:53.609] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:38:53.609] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:38:53.609] (Prefill before Flush             :  14) @Run
[2018-01-12 18:38:53.609] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:38:53.609] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:38:53.609] (PreFillP1                        :  15) @Run
[2018-01-12 18:38:53.609] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:38:53.659] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:38:53.659] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:38:53.659] (PreFillP2                        :  16) @Run
[2018-01-12 18:38:53.659] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:38:53.759] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:54.189] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:38:54.239] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:38:54.239] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:54.289] (PreFillP1                        :  15) @Stop
[2018-01-12 18:38:54.389] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:38:54.439] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:38:54.439] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:38:54.439] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:38:54.459] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:38:54.489] (PreFillP2                        :  16) @Stop
[2018-01-12 18:38:54.509] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:38:54.509] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:38:01.167] (Detector                         :   2) @Stop
[2018-01-12 18:38:54.839] ** STARTING F03 MAIN ROUTINE **
[2018-01-12 18:38:54.839] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:38:54.849] (Main Well                        :   0) @Run
[2018-01-12 18:38:54.849] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:38:54.849] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:38:54.849] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:38:54.849] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:38:54.849] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:38:54.849] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:38:54.849] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:38:54.849] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:38:54.849] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:38:54.849] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:38:55.349] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:38:55.349] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:38:55.399] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:38:55.509] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:38:55.509] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:38:55.509] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:38:55.509] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:38:55.509] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:38:55.509] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:38:55.509] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:38:55.509] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:38:55.509] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:38:55.509] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:38:55.529] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:38:55.579] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:38:55.599] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:38:55.849] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:38:55.849] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:38:55.849] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:38:55.849] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:38:55.899] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:38:55.899] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:38:55.899] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:38:55.899] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:38:55.999] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:56.269] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:38:56.319] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:38:56.319] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:56.629] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:38:56.679] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:38:56.679] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:56.929] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:38:56.979] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:38:56.979] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:57.129] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:38:57.179] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:38:57.179] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:38:57.249] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:38:57.489] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:38:57.539] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:38:57.539] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:38:57.589] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:38:57.689] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:38:57.739] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:38:57.739] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:38:57.739] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:38:57.739] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:38:57.739] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:38:57.799] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:38:57.849] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:38:57.909] (Main Well                        :   0) Move to Well 63 with z-offset of 2540 um (Wait)
[2018-01-12 18:39:00.789] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:39:00.889] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:39:00.939] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:39:00.939] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:01.149] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:39:01.199] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:39:01.199] (Main Well                        :   0) Stop Pump
[2018-01-12 18:39:01.239] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:39:01.299] (Main Well                        :   0) Move to Well 63 with z-offset of 310 um (Wait)
[2018-01-12 18:39:11.600] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:11.840] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:39:11.890] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:39:11.890] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:39:11.890] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:39:11.890] (Pickup Sample                    :  21) @Run
[2018-01-12 18:39:11.890] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:39:16.560] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:39:19.180] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:39:19.260] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:39:19.460] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:19.560] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:19.610] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:19.610] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:19.710] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:19.760] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:19.760] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:19.860] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:19.910] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:19.910] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:20.020] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:20.070] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:20.070] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:20.260] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:20.310] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:20.310] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:20.410] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:20.460] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:20.460] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:20.560] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:20.610] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:20.610] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:20.710] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:20.760] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:20.760] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:20.970] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:21.020] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:21.020] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:21.120] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:21.170] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:21.170] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:21.290] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:21.340] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:21.340] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:21.440] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:21.490] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:21.490] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:21.700] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:21.750] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:21.750] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:21.850] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:21.900] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:21.900] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:22.000] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:22.050] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:22.050] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:22.150] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:22.200] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:22.200] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:22.410] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:22.460] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:22.460] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:22.560] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:22.610] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:22.610] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:22.710] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:22.760] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:22.760] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:22.860] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:22.910] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:22.910] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:23.120] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:23.170] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:23.170] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:23.270] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:23.320] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:23.320] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:23.420] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:23.470] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:23.470] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:23.570] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:23.620] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:23.620] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:23.830] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:23.880] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:23.880] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:23.980] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:24.030] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:24.030] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:24.130] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:24.180] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:24.180] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:24.280] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:24.330] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:24.330] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:24.540] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:24.590] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:24.590] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:24.690] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:24.740] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:24.740] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:24.840] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:24.890] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:24.890] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:24.990] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:25.040] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:25.040] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:25.250] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:25.300] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:25.300] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:25.400] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:25.450] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:25.450] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:25.550] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:25.600] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:25.600] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:25.700] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:25.750] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:25.750] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:25.960] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:26.010] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:26.010] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:26.110] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:26.160] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:26.160] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:26.260] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:26.310] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:26.310] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:26.410] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:26.460] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:26.460] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:26.670] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:26.720] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:26.720] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:26.820] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:26.870] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:26.870] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:26.970] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:27.020] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:27.020] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:27.120] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:27.170] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:27.170] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:27.380] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:27.430] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:27.430] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:27.530] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:27.580] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:27.580] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:27.680] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:27.730] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:27.730] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:27.830] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:27.880] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:27.880] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:28.090] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:28.140] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:28.140] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:28.240] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:28.290] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:28.290] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:28.390] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:28.440] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:28.440] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:28.540] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:28.590] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:39:28.590] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:39:28.800] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:28.850] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:39:28.850] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:39:28.950] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:39:29.000] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:39:29.000] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:39:29.000] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:39:29.290] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:39:29.380] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:39:29.630] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:39:29.650] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:39:29.700] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:39:29.700] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:39:29.700] (Singulate Sample                 :  22) @Run
[2018-01-12 18:39:29.700] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:39:29.700] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:39:29.700] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:39:29.760] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:39:29.810] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:39:29.870] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:39:29.970] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_F03_RAW.qlb"
[2018-01-12 18:39:30.080] (Detector                         :   2) @Run
[2018-01-12 18:39:30.080] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:40:09.980] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:40:11.040] (Detector                         :   2) @Stop
[2018-01-12 18:40:11.180] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:40:11.180] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:11.280] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:40:11.330] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:40:11.330] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:11.430] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:40:11.480] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:40:11.480] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:40:11.480] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:40:11.700] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:40:11.700] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:40:11.700] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:40:11.700] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:40:11.700] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:40:11.700] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:40:11.700] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:11.700] (PreFillP1                        :  24) @Run
[2018-01-12 18:40:11.700] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:40:11.750] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:40:11.750] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:40:11.750] (PreFillP2                        :  25) @Run
[2018-01-12 18:40:11.750] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:40:11.850] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:12.120] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:12.170] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:12.170] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:12.330] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:12.380] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:12.380] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:12.690] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:12.740] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:12.740] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:12.990] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:13.040] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:13.040] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:13.190] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:13.240] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:13.240] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:13.410] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:13.460] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:13.460] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:13.750] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:13.800] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:13.800] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:14.050] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:14.100] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:14.100] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:14.250] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:14.300] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:14.300] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:14.480] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:14.530] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:14.530] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:14.820] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:14.870] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:40:14.870] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:14.920] (PreFillP1                        :  24) @Stop
[2018-01-12 18:40:15.120] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:15.170] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:40:15.170] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:15.270] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:15.320] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:40:15.320] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:15.490] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:40:15.540] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:40:15.540] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:40:15.540] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:40:15.550] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:40:15.550] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:40:15.550] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:40:15.650] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:40:15.700] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:40:15.750] (PreFillP2                        :  25) @Stop
[2018-01-12 18:40:15.770] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:40:16.020] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:40:16.020] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:40:16.020] (Flush Capillary                  :  27) @Run
[2018-01-12 18:40:16.020] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:40:16.070] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:40:16.070] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:40:16.070] (Flush Singulator                 :  28) @Run
[2018-01-12 18:40:16.070] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:40:16.170] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:16.460] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:40:16.510] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:16.510] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:16.800] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:40:16.850] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:16.850] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:17.000] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:40:17.050] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:17.050] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:17.200] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:40:17.250] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:17.250] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:17.420] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:40:17.470] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:40:17.470] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:17.520] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:40:17.760] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:40:17.810] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:40:17.810] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:40:17.810] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:40:17.850] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:40:17.860] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:40:17.880] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:40:17.880] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:40:17.880] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:40:17.900] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:40:17.950] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:40:17.970] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:40:18.220] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:40:18.220] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:40:18.220] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:40:18.220] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:40:18.270] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:40:18.270] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:40:18.270] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:40:18.270] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:40:18.370] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:18.540] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:40:18.590] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:18.590] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:18.840] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:40:18.890] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:18.890] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:19.200] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:40:19.250] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:40:19.250] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:19.300] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:40:19.410] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:40:19.510] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:40:19.560] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:40:19.560] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:40:19.560] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:40:19.590] (Main Well                        :   0) Stop Pump
[2018-01-12 18:40:19.630] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:40:19.630] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:40:19.630] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:40:19.670] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:40:19.720] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:40:19.830] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:40:20.080] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:40:20.080] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:40:20.080] (Flush Capillary                  :  33) @Run
[2018-01-12 18:40:20.080] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:40:20.130] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:40:20.130] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:40:20.130] (Flush Singulator                 :  34) @Run
[2018-01-12 18:40:20.130] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:40:20.230] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:20.500] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:40:20.550] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:20.550] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:20.860] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:40:20.910] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:40:20.910] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:20.960] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:40:21.060] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:40:21.160] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:40:21.210] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:40:21.210] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:40:21.210] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:40:21.230] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:40:21.250] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:40:21.250] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:40:21.250] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:40:21.270] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:40:21.320] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:40:21.450] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:40:21.700] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:40:21.700] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:40:21.700] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:40:21.700] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:40:21.750] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:40:21.750] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:40:21.750] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:40:21.750] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:40:21.850] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:22.120] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:40:22.170] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:22.170] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:22.480] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:40:22.530] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:40:22.530] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:22.580] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:40:22.680] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:40:22.780] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:40:22.830] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:40:22.830] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:40:22.830] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:40:22.850] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:40:22.870] (Main Well                        :   0) Stop routine
[2018-01-12 18:40:22.870] (Main Well                        :   0) @Stop
[2018-01-12 18:40:23.150] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:40:23.150] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:40:23.170] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:40:23.170] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:40:23.170] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:40:23.170] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:40:25.150] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:40:25.150] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:40:25.150] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:40:25.150] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:40:25.190] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:40:25.190] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:40:11.040] (Detector                         :  17) @Stop
[2018-01-12 18:40:29.430] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:40:29.430] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:40:29.430] (MainPre Routine                  :   0) @Run
[2018-01-12 18:40:29.430] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:40:35.450] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:40:35.450] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:40:35.450] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:40:36.090] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:40:36.090] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:40:36.100] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:40:37.830] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:40:37.830] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:40:37.830] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:40:37.990] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:40:38.040] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:40:38.060] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:40:38.310] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:40:38.310] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:40:38.310] (Initialize P1                    :   3) @Run
[2018-01-12 18:40:38.310] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:40:38.360] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:40:38.360] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:40:38.360] (Initialize P2                    :   4) @Run
[2018-01-12 18:40:38.360] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:40:38.540] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:38.770] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:38.890] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:40:38.940] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:38.940] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:38.990] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:40:39.040] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:39.040] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:39.230] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:40:39.280] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:39.280] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:39.330] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:40:39.380] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:39.380] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:39.430] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:40:39.480] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:39.480] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:39.530] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:40:39.580] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:39.580] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:39.630] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:40:39.680] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:39.680] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:39.730] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:40:39.780] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:39.780] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:39.850] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:40:39.900] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:39.900] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:40.090] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:40:40.140] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:40.140] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:40.190] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:40:40.240] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:40.240] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:40.290] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:40:40.340] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:40.340] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:40.390] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:40:40.440] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:40.440] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:40.490] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:40:40.540] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:40.540] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:40.590] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:40:40.640] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:40.640] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:40.710] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:40:40.760] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:40.760] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:40.950] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:40:41.000] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:41.000] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:41.050] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:40:41.100] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:40:41.100] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:41.150] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:40:41.200] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:40:41.200] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:40:41.200] (Initialize P1                    :   3) @Stop
[2018-01-12 18:40:41.250] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:40:41.300] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:40:41.300] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:40:41.300] (Initialize P2                    :   4) @Stop
[2018-01-12 18:40:41.560] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:40:41.760] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:40:41.780] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:40:41.780] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:40:41.780] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:40:41.780] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:40:41.780] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:41.780] (PreFillP1                        :   6) @Run
[2018-01-12 18:40:41.780] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:40:41.830] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:40:41.830] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:40:41.830] (PreFillP2                        :   7) @Run
[2018-01-12 18:40:41.830] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:40:41.930] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:42.200] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:42.250] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:42.250] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:42.560] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:42.610] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:42.610] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:42.860] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:42.910] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:42.910] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:43.060] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:43.110] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:43.110] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:43.300] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:43.350] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:43.350] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:43.640] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:43.690] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:43.690] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:43.940] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:43.990] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:40:43.990] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:44.040] (PreFillP1                        :   6) @Stop
[2018-01-12 18:40:44.140] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:44.190] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:40:44.190] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:44.360] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:44.410] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:40:44.410] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:44.600] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:44.650] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:40:44.650] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:44.801] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:44.851] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:40:44.851] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:44.951] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:45.001] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:40:45.001] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:45.151] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:45.201] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:40:45.201] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:45.421] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:45.471] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:40:45.471] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:40:45.471] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:40:45.481] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:40:45.521] (PreFillP2                        :   7) @Stop
[2018-01-12 18:40:45.561] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:40:45.561] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:40:45.561] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:40:45.581] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:45.631] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:40:45.651] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:40:45.901] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:40:45.901] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:45.901] (Flush Capillary                  :   9) @Run
[2018-01-12 18:40:45.901] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:40:45.951] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:40:45.951] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:40:45.951] (Flush Singulator                 :  10) @Run
[2018-01-12 18:40:45.951] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:40:46.051] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:46.291] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:46.341] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:46.341] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:46.491] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:46.541] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:46.541] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:46.711] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:46.761] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:46.761] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:47.051] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:47.101] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:47.101] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:47.351] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:47.401] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:47.401] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:47.551] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:47.601] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:47.601] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:47.771] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:47.821] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:47.821] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:48.111] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:48.161] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:40:48.161] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:48.211] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:40:48.311] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:40:48.411] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:48.461] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:40:48.461] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:40:48.461] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:40:48.511] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:40:48.531] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:40:48.531] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:40:48.531] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:40:48.571] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:48.621] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:40:48.731] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:40:48.981] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:40:48.981] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:48.981] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:40:48.981] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:40:49.031] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:40:49.031] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:40:49.031] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:40:49.031] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:40:49.131] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:49.401] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:49.451] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:49.451] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:49.761] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:49.811] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:49.811] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:50.061] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:50.111] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:50.111] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:50.261] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:50.311] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:50.311] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:50.481] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:50.531] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:50.531] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:50.581] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:40:50.821] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:50.871] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:40:50.871] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:50.921] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:40:51.021] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:51.071] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:40:51.071] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:40:51.071] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:40:51.081] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:40:51.081] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:40:51.081] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:40:51.081] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:40:51.081] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:40:51.081] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:40:51.081] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:51.081] (PreFillP1                        :   6) @Run
[2018-01-12 18:40:51.081] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:40:51.131] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:40:51.131] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:40:51.131] (PreFillP2                        :   7) @Run
[2018-01-12 18:40:51.131] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:40:51.231] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:51.521] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:51.571] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:51.571] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:51.861] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:51.911] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:51.911] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:52.061] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:52.111] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:52.111] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:52.261] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:52.311] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:52.311] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:52.481] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:52.531] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:52.531] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:52.821] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:52.871] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:52.871] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:53.121] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:53.171] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:40:53.171] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:53.321] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:53.371] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:40:53.371] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:53.421] (PreFillP1                        :   6) @Stop
[2018-01-12 18:40:53.541] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:53.591] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:40:53.591] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:53.881] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:53.931] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:40:53.931] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:54.081] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:54.131] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:40:54.131] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:54.231] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:54.281] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:40:54.281] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:54.431] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:54.481] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:40:54.481] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:54.691] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:40:54.741] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:40:54.741] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:40:54.741] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:40:54.781] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:40:54.791] (PreFillP2                        :   7) @Stop
[2018-01-12 18:40:54.831] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:40:54.831] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:40:54.831] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:40:54.851] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:54.901] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:40:54.921] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:40:55.171] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:40:55.171] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:55.171] (Flush Capillary                  :   9) @Run
[2018-01-12 18:40:55.171] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:40:55.221] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:40:55.221] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:40:55.221] (Flush Singulator                 :  10) @Run
[2018-01-12 18:40:55.221] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:40:55.321] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:55.571] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:55.621] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:55.621] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:55.771] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:55.821] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:55.821] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:55.991] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:56.041] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:56.041] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:56.331] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:56.381] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:56.381] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:56.631] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:56.681] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:56.681] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:56.831] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:56.881] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:56.881] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:57.051] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:57.101] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:57.101] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:57.391] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:57.441] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:40:57.441] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:40:57.491] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:40:57.591] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:40:57.691] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:40:57.741] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:40:57.741] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:40:57.741] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:40:57.781] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:40:57.801] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:40:57.801] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:40:57.801] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:40:57.841] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:57.891] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:40:58.001] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:40:58.251] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:40:58.251] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:58.251] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:40:58.251] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:40:58.301] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:40:58.301] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:40:58.301] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:40:58.301] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:40:58.401] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:58.671] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:58.721] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:58.721] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:59.031] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:59.081] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:59.081] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:59.331] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:59.381] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:59.381] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:59.531] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:59.581] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:59.581] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:59.751] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:40:59.801] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:40:59.801] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:40:59.851] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:41:00.091] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:41:00.141] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:41:00.141] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:00.191] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:41:00.291] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:41:00.351] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:41:00.351] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:41:00.351] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:41:00.351] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:41:00.351] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:41:00.351] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:41:00.351] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:41:00.351] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:41:00.351] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:41:00.351] (Prefill before Flush             :  14) @Run
[2018-01-12 18:41:00.351] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:41:00.351] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:41:00.351] (PreFillP1                        :  15) @Run
[2018-01-12 18:41:00.351] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:41:00.401] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:41:00.401] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:41:00.401] (PreFillP2                        :  16) @Run
[2018-01-12 18:41:00.401] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:41:00.501] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:41:00.791] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:41:00.841] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:00.841] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:41:01.031] (PreFillP1                        :  15) @Stop
[2018-01-12 18:41:01.131] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:41:01.181] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:41:01.181] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:01.231] (PreFillP2                        :  16) @Stop
[2018-01-12 18:41:01.331] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:41:01.381] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:41:01.381] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:41:01.381] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:41:01.401] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:41:01.421] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:41:01.421] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:40:11.040] (Detector                         :   2) @Stop
[2018-01-12 18:41:01.511] ** STARTING G03 MAIN ROUTINE **
[2018-01-12 18:41:01.511] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:41:01.511] (Main Well                        :   0) @Run
[2018-01-12 18:41:01.511] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:41:01.511] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:41:01.511] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:41:01.511] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:41:01.511] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:41:01.511] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:41:01.511] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:41:01.511] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:41:01.511] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:41:01.511] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:41:02.101] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:41:02.101] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:41:02.111] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:41:02.121] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:41:02.261] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:41:02.261] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:41:02.261] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:41:02.261] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:41:02.261] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:41:02.261] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:41:02.261] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:41:02.261] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:41:02.261] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:41:02.281] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:41:02.331] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:41:02.351] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:41:02.601] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:41:02.601] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:41:02.601] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:41:02.601] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:41:02.651] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:41:02.651] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:41:02.651] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:41:02.651] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:41:02.751] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:41:03.021] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:41:03.071] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:41:03.071] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:41:03.391] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:41:03.441] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:41:03.441] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:41:03.691] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:41:03.741] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:41:03.741] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:41:03.891] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:41:03.941] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:41:03.941] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:41:04.011] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:41:04.251] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:41:04.301] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:41:04.301] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:04.351] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:41:04.451] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:41:04.501] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:41:04.501] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:41:04.501] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:41:04.501] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:41:04.501] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:41:04.561] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:41:04.611] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:41:04.671] (Main Well                        :   0) Move to Well 75 with z-offset of 2540 um (Wait)
[2018-01-12 18:41:07.751] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:41:07.851] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:41:07.901] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:41:07.901] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:08.111] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:41:08.161] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:41:08.161] (Main Well                        :   0) Stop Pump
[2018-01-12 18:41:08.201] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:41:08.261] (Main Well                        :   0) Move to Well 75 with z-offset of 310 um (Wait)
[2018-01-12 18:41:18.701] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:18.941] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:41:18.991] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:41:18.991] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:41:18.991] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:41:18.991] (Pickup Sample                    :  21) @Run
[2018-01-12 18:41:18.991] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:41:23.661] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:41:26.461] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:41:26.541] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:41:26.741] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:26.841] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:26.891] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:26.891] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:26.991] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:27.041] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:27.041] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:27.141] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:27.191] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:27.191] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:27.301] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:27.351] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:27.351] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:27.541] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:27.591] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:27.591] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:27.691] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:27.741] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:27.741] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:27.841] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:27.891] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:27.891] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:27.991] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:28.041] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:28.041] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:28.251] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:28.301] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:28.301] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:28.401] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:28.451] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:28.451] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:28.551] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:28.601] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:28.601] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:28.701] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:28.751] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:28.751] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:28.961] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:29.011] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:29.011] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:29.111] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:29.161] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:29.161] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:29.261] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:29.311] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:29.311] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:29.411] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:29.461] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:29.461] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:29.671] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:29.721] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:29.721] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:29.821] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:29.871] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:29.871] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:29.971] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:30.021] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:30.021] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:30.121] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:30.171] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:30.171] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:30.381] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:30.431] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:30.431] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:30.531] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:30.581] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:30.581] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:30.681] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:30.731] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:30.731] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:30.831] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:30.881] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:30.881] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:31.091] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:31.141] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:31.141] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:31.241] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:31.291] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:31.291] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:31.401] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:31.451] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:31.451] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:31.551] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:31.601] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:31.601] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:31.811] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:31.861] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:31.861] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:31.961] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:32.011] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:32.011] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:32.111] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:32.161] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:32.161] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:32.261] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:32.311] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:32.311] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:32.521] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:32.571] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:32.571] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:32.671] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:32.721] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:32.721] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:32.821] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:32.871] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:32.871] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:32.971] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:33.021] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:33.021] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:33.231] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:33.281] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:33.281] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:33.381] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:33.431] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:33.431] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:33.531] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:33.581] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:33.581] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:33.681] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:33.731] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:33.731] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:33.941] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:33.991] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:33.991] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:34.091] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:34.141] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:34.141] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:34.241] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:34.291] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:34.291] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:34.391] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:34.441] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:34.441] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:34.651] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:34.701] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:34.701] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:34.801] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:34.851] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:34.851] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:34.951] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:35.001] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:35.001] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:35.101] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:35.151] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:35.151] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:35.361] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:35.411] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:35.411] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:35.511] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:35.561] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:35.561] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:35.661] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:35.711] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:35.711] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:35.811] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:35.861] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:41:35.861] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:41:36.071] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:36.121] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:41:36.121] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:41:36.221] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:41:36.271] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:41:36.271] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:41:36.271] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:41:36.591] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:41:36.651] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:41:36.901] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:41:36.921] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:41:36.971] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:41:36.971] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:41:36.971] (Singulate Sample                 :  22) @Run
[2018-01-12 18:41:36.971] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:41:36.971] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:41:36.971] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:41:37.031] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:41:37.081] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:41:37.141] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:41:37.241] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_G03_RAW.qlb"
[2018-01-12 18:41:37.341] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:41:37.351] (Detector                         :   2) @Run
[2018-01-12 18:42:17.241] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:42:18.341] (Detector                         :   2) @Stop
[2018-01-12 18:42:18.441] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:42:18.441] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:18.541] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:42:18.591] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:42:18.591] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:18.691] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:42:18.741] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:42:18.741] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:42:18.741] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:42:18.971] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:42:18.971] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:42:18.971] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:42:18.971] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:42:18.971] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:42:18.971] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:42:18.971] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:18.971] (PreFillP1                        :  24) @Run
[2018-01-12 18:42:18.971] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:42:19.021] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:42:19.021] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:42:19.021] (PreFillP2                        :  25) @Run
[2018-01-12 18:42:19.021] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:42:19.121] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:19.391] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:19.441] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:19.441] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:19.601] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:19.651] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:19.651] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:19.961] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:20.011] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:20.011] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:20.261] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:20.311] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:20.311] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:20.471] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:20.521] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:20.521] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:20.691] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:20.741] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:20.741] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:21.031] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:21.081] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:21.081] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:21.331] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:21.381] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:21.381] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:21.531] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:21.581] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:21.581] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:21.751] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:21.801] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:21.801] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:22.091] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:22.141] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:42:22.141] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:22.191] (PreFillP1                        :  24) @Stop
[2018-01-12 18:42:22.391] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:22.441] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:42:22.441] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:22.541] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:22.591] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:42:22.591] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:22.761] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:42:22.811] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:42:22.811] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:42:22.811] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:42:22.821] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:42:22.821] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:42:22.821] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:42:22.921] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:42:22.971] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:42:23.021] (PreFillP2                        :  25) @Stop
[2018-01-12 18:42:23.041] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:42:23.291] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:42:23.291] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:42:23.291] (Flush Capillary                  :  27) @Run
[2018-01-12 18:42:23.291] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:42:23.341] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:42:23.341] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:42:23.341] (Flush Singulator                 :  28) @Run
[2018-01-12 18:42:23.341] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:42:23.441] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:23.731] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:42:23.781] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:23.781] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:24.071] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:42:24.121] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:24.121] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:24.271] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:42:24.321] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:24.321] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:24.471] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:42:24.521] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:24.521] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:24.691] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:42:24.741] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:42:24.741] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:24.791] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:42:25.031] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:42:25.081] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:42:25.081] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:42:25.081] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:42:25.121] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:42:25.131] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:42:25.151] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:42:25.151] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:42:25.151] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:42:25.171] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:42:25.221] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:42:25.241] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:42:25.491] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:42:25.491] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:42:25.491] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:42:25.491] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:42:25.541] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:42:25.541] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:42:25.541] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:42:25.541] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:42:25.641] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:25.811] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:42:25.861] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:25.861] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:26.111] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:42:26.161] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:26.161] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:26.471] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:42:26.521] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:42:26.521] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:26.571] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:42:26.671] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:42:26.771] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:42:26.821] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:42:26.821] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:42:26.821] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:42:26.851] (Main Well                        :   0) Stop Pump
[2018-01-12 18:42:26.891] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:42:26.891] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:42:26.891] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:42:26.931] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:42:26.981] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:42:27.091] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:42:27.341] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:42:27.341] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:42:27.341] (Flush Capillary                  :  33) @Run
[2018-01-12 18:42:27.341] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:42:27.391] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:42:27.391] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:42:27.391] (Flush Singulator                 :  34) @Run
[2018-01-12 18:42:27.391] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:42:27.491] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:27.771] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:42:27.821] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:27.821] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:28.131] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:42:28.181] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:42:28.181] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:28.231] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:42:28.331] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:42:28.431] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:42:28.481] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:42:28.481] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:42:28.481] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:42:28.491] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:42:28.511] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:42:28.511] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:42:28.511] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:42:28.531] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:42:28.581] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:42:28.711] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:42:28.961] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:42:28.961] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:42:28.961] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:42:28.961] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:42:29.011] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:42:29.011] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:42:29.011] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:42:29.011] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:42:29.111] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:29.381] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:42:29.431] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:29.431] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:29.741] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:42:29.791] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:42:29.791] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:29.841] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:42:29.941] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:42:30.041] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:42:30.091] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:42:30.091] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:42:30.091] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:42:30.111] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:42:30.131] (Main Well                        :   0) Stop routine
[2018-01-12 18:42:30.131] (Main Well                        :   0) @Stop
[2018-01-12 18:42:30.341] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:42:30.341] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:42:30.341] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:42:30.341] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:42:30.341] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:42:30.341] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:42:32.341] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:42:32.341] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:42:32.341] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:42:32.341] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:42:32.381] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:42:32.381] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:42:18.341] (Detector                         :  17) @Stop
[2018-01-12 18:42:36.451] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:42:36.451] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:42:36.451] (MainPre Routine                  :   0) @Run
[2018-01-12 18:42:36.451] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:42:42.511] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:42:42.511] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:42:42.511] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:42:43.151] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:42:43.151] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:42:43.161] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:42:44.891] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:42:44.891] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:42:44.891] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:42:45.051] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:42:45.101] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:42:45.121] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:42:45.371] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:42:45.371] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:42:45.371] (Initialize P1                    :   3) @Run
[2018-01-12 18:42:45.371] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:42:45.421] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:42:45.421] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:42:45.421] (Initialize P2                    :   4) @Run
[2018-01-12 18:42:45.421] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:42:45.601] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:45.831] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:45.951] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:42:46.001] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:46.001] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:46.051] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:42:46.101] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:46.101] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:46.291] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:42:46.341] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:46.341] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:46.391] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:42:46.441] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:46.441] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:46.491] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:42:46.541] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:46.541] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:46.591] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:42:46.641] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:46.641] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:46.691] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:42:46.741] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:46.741] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:46.791] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:42:46.841] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:46.841] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:46.911] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:42:46.961] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:46.961] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:47.151] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:42:47.201] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:47.201] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:47.251] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:42:47.301] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:47.301] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:47.351] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:42:47.401] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:47.401] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:47.451] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:42:47.501] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:47.501] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:47.551] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:42:47.601] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:47.601] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:47.651] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:42:47.701] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:47.701] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:47.771] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:42:47.821] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:47.821] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:48.011] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:42:48.061] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:48.061] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:48.111] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:42:48.161] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:42:48.161] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:48.211] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:42:48.261] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:42:48.261] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:42:48.261] (Initialize P1                    :   3) @Stop
[2018-01-12 18:42:48.311] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:42:48.361] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:42:48.361] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:42:48.361] (Initialize P2                    :   4) @Stop
[2018-01-12 18:42:48.621] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:42:48.821] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:42:48.841] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:42:48.841] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:42:48.841] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:42:48.841] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:42:48.841] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:48.841] (PreFillP1                        :   6) @Run
[2018-01-12 18:42:48.841] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:42:48.891] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:42:48.891] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:42:48.891] (PreFillP2                        :   7) @Run
[2018-01-12 18:42:48.891] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:42:48.991] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:49.261] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:49.311] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:49.311] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:49.621] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:49.671] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:49.671] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:49.921] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:49.971] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:49.971] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:50.121] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:50.171] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:50.171] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:50.341] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:50.391] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:50.391] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:50.681] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:50.731] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:50.731] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:50.981] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:51.031] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:42:51.031] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:51.081] (PreFillP1                        :   6) @Stop
[2018-01-12 18:42:51.181] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:51.231] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:42:51.231] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:51.401] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:51.451] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:42:51.451] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:51.641] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:51.691] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:42:51.691] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:51.841] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:51.891] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:42:51.891] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:51.991] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:52.041] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:42:52.041] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:52.191] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:52.241] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:42:52.241] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:52.451] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:52.501] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:42:52.501] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:42:52.501] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:42:52.541] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:42:52.551] (PreFillP2                        :   7) @Stop
[2018-01-12 18:42:52.591] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:42:52.591] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:42:52.591] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:42:52.611] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:42:52.661] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:42:52.681] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:42:52.931] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:42:52.931] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:42:52.931] (Flush Capillary                  :   9) @Run
[2018-01-12 18:42:52.931] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:42:52.981] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:42:52.981] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:42:52.981] (Flush Singulator                 :  10) @Run
[2018-01-12 18:42:52.981] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:42:53.081] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:53.331] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:42:53.381] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:53.381] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:53.531] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:42:53.581] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:53.581] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:53.751] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:42:53.801] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:53.801] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:54.091] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:42:54.141] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:54.141] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:54.391] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:42:54.441] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:54.441] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:54.591] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:42:54.641] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:54.641] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:54.811] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:42:54.861] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:54.861] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:55.151] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:42:55.201] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:42:55.201] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:55.251] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:42:55.351] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:42:55.451] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:42:55.501] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:42:55.501] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:42:55.501] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:42:55.541] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:42:55.561] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:42:55.561] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:42:55.561] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:42:55.601] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:42:55.651] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:42:55.761] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:42:56.011] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:42:56.011] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:42:56.011] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:42:56.011] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:42:56.061] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:42:56.061] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:42:56.061] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:42:56.061] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:42:56.161] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:56.431] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:42:56.481] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:56.481] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:56.791] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:42:56.841] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:56.841] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:57.091] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:42:57.141] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:57.141] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:57.291] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:42:57.341] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:57.341] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:57.511] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:42:57.561] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:42:57.561] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:57.611] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:42:57.851] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:42:57.901] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:42:57.901] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:42:57.951] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:42:58.051] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:42:58.101] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:42:58.101] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:42:58.101] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:42:58.111] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:42:58.111] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:42:58.111] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:42:58.111] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:42:58.111] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:42:58.111] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:42:58.111] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:58.111] (PreFillP1                        :   6) @Run
[2018-01-12 18:42:58.111] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:42:58.161] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:42:58.161] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:42:58.161] (PreFillP2                        :   7) @Run
[2018-01-12 18:42:58.161] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:42:58.261] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:58.551] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:58.601] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:58.601] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:58.891] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:58.941] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:58.941] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:59.091] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:59.141] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:59.141] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:59.291] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:59.341] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:59.341] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:59.511] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:59.561] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:59.561] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:42:59.851] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:42:59.901] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:42:59.901] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:00.151] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:43:00.201] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:00.201] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:00.351] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:43:00.401] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:43:00.401] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:00.471] (PreFillP1                        :   6) @Stop
[2018-01-12 18:43:00.711] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:43:00.761] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:43:00.761] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:00.911] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:43:00.961] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:43:00.961] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:01.061] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:43:01.111] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:43:01.111] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:01.261] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:43:01.311] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:43:01.311] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:01.521] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:43:01.571] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:43:01.571] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:01.721] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:43:01.771] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:43:01.771] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:43:01.771] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:43:01.811] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:43:01.851] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:43:01.851] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:43:01.851] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:43:01.951] (PreFillP2                        :   7) @Stop
[2018-01-12 18:43:01.971] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:43:02.021] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:43:02.151] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:43:02.401] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:43:02.401] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:43:02.401] (Flush Capillary                  :   9) @Run
[2018-01-12 18:43:02.401] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:43:02.451] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:43:02.451] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:43:02.451] (Flush Singulator                 :  10) @Run
[2018-01-12 18:43:02.451] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:43:02.551] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:02.821] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:43:02.871] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:43:02.871] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:03.181] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:43:03.231] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:43:03.231] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:03.481] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:43:03.531] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:43:03.531] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:03.681] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:43:03.731] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:43:03.731] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:04.041] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:43:04.091] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:43:04.091] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:04.341] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:43:04.391] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:43:04.391] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:04.541] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:43:04.591] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:43:04.591] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:04.641] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:43:04.761] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:43:04.811] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:43:04.811] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:43:04.811] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:43:04.851] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:43:04.861] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:43:05.021] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:43:05.021] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:43:05.021] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:43:05.041] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:43:05.091] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:43:05.111] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:43:05.361] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:43:05.361] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:43:05.361] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:43:05.361] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:43:05.411] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:43:05.411] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:43:05.411] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:43:05.411] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:43:05.511] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:05.801] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:43:05.851] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:43:05.851] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:06.141] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:43:06.191] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:43:06.191] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:06.341] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:43:06.391] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:43:06.391] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:06.541] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:43:06.591] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:43:06.591] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:06.761] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:43:06.811] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:43:06.811] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:06.861] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:43:07.101] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:43:07.151] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:43:07.151] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:07.201] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:43:07.301] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:43:07.351] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:43:07.351] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:43:07.351] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:43:07.371] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:43:07.371] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:43:07.371] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:43:07.371] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:43:07.371] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:43:07.371] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:43:07.371] (Prefill before Flush             :  14) @Run
[2018-01-12 18:43:07.371] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:43:07.371] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:43:07.371] (PreFillP1                        :  15) @Run
[2018-01-12 18:43:07.371] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:43:07.421] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:43:07.421] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:43:07.421] (PreFillP2                        :  16) @Run
[2018-01-12 18:43:07.421] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:43:07.521] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:07.811] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:43:07.861] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:07.861] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:08.051] (PreFillP1                        :  15) @Stop
[2018-01-12 18:43:08.151] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:43:08.201] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:43:08.201] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:08.251] (PreFillP2                        :  16) @Stop
[2018-01-12 18:43:08.371] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:43:08.421] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:43:08.421] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:43:08.421] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:43:08.471] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:43:08.491] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:43:08.491] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:42:18.341] (Detector                         :   2) @Stop
[2018-01-12 18:43:09.031] ** STARTING H03 MAIN ROUTINE **
[2018-01-12 18:43:09.031] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:43:09.031] (Main Well                        :   0) @Run
[2018-01-12 18:43:09.031] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:43:09.031] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:43:09.031] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:43:09.031] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:43:09.031] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:43:09.031] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:43:09.031] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:43:09.031] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:43:09.031] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:43:09.031] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:43:09.531] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:43:09.531] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:43:09.581] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:43:09.691] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:43:09.691] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:43:09.691] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:43:09.691] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:43:09.691] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:43:09.691] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:43:09.691] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:43:09.691] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:43:09.691] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:43:09.691] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:43:09.711] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:43:09.761] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:43:09.781] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:43:10.031] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:43:10.031] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:43:10.031] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:43:10.031] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:43:10.081] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:43:10.081] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:43:10.081] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:43:10.081] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:43:10.181] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:10.451] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:43:10.501] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:43:10.501] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:10.811] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:43:10.861] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:43:10.861] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:11.111] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:43:11.161] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:43:11.161] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:11.311] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:43:11.361] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:43:11.361] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:11.411] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:43:11.531] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:43:11.581] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:43:11.581] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:11.631] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:43:11.871] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:43:11.921] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:43:11.921] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:43:11.921] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:43:11.921] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:43:11.921] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:43:11.981] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:43:12.031] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:43:12.091] (Main Well                        :   0) Move to Well 87 with z-offset of 2540 um (Wait)
[2018-01-12 18:43:15.321] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:15.561] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:43:15.611] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:43:15.611] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:15.711] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:43:15.761] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:43:15.761] (Main Well                        :   0) Stop Pump
[2018-01-12 18:43:15.801] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:43:15.861] (Main Well                        :   0) Move to Well 87 with z-offset of 310 um (Wait)
[2018-01-12 18:43:26.441] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:26.681] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:43:26.731] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:43:26.731] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:43:26.731] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:43:26.731] (Pickup Sample                    :  21) @Run
[2018-01-12 18:43:26.731] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:43:31.401] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:43:34.201] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:43:34.281] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:43:34.481] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:34.581] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:34.631] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:34.631] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:34.731] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:34.781] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:34.781] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:34.881] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:34.931] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:34.931] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:35.041] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:35.091] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:35.091] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:35.281] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:35.331] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:35.331] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:35.431] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:35.481] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:35.481] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:35.581] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:35.631] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:35.631] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:35.731] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:35.781] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:35.781] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:35.991] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:36.041] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:36.041] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:36.141] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:36.191] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:36.191] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:36.291] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:36.341] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:36.341] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:36.451] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:36.501] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:36.501] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:36.711] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:36.761] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:36.761] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:36.861] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:36.911] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:36.911] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:37.011] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:37.061] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:37.061] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:37.201] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:37.251] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:37.251] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:37.461] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:37.511] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:37.511] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:37.611] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:37.661] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:37.661] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:37.761] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:37.811] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:37.811] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:37.911] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:37.961] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:37.961] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:38.171] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:38.221] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:38.221] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:38.321] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:38.371] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:38.371] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:38.471] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:38.521] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:38.521] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:38.621] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:38.671] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:38.671] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:38.881] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:38.931] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:38.931] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:39.031] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:39.081] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:39.081] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:39.201] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:39.251] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:39.251] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:39.351] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:39.401] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:39.401] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:39.611] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:39.661] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:39.661] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:39.761] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:39.811] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:39.811] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:39.911] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:39.961] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:39.961] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:40.061] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:40.111] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:40.111] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:40.321] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:40.371] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:40.371] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:40.471] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:40.521] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:40.521] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:40.621] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:40.671] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:40.671] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:40.771] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:40.821] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:40.821] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:41.031] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:41.081] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:41.081] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:41.181] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:41.231] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:41.231] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:41.331] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:41.381] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:41.381] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:41.481] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:41.531] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:41.531] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:41.741] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:41.791] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:41.791] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:41.891] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:41.941] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:41.941] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:42.041] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:42.091] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:42.091] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:42.191] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:42.241] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:42.241] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:42.451] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:42.501] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:42.501] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:42.601] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:42.651] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:42.651] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:42.751] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:42.801] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:42.801] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:42.901] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:42.951] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:42.951] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:43.161] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:43.211] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:43.211] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:43.311] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:43.361] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:43.361] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:43.461] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:43.511] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:43.511] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:43.611] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:43.661] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:43:43.661] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:43:43.871] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:43.921] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:43:43.921] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:43:44.021] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:43:44.071] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:43:44.071] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:43:44.071] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:43:44.331] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:43:44.451] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:43:44.701] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:43:44.721] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:43:44.771] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:43:44.771] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:43:44.771] (Singulate Sample                 :  22) @Run
[2018-01-12 18:43:44.771] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:43:44.771] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:43:44.771] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:43:44.831] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:43:44.881] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:43:44.941] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:43:45.041] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_H03_RAW.qlb"
[2018-01-12 18:43:45.151] (Detector                         :   2) @Run
[2018-01-12 18:43:45.151] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:44:25.053] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:44:26.013] (Detector                         :   2) @Stop
[2018-01-12 18:44:26.053] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:44:26.053] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:26.163] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:44:26.213] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:44:26.213] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:26.313] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:44:26.363] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:44:26.363] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:44:26.363] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:44:26.573] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:44:26.573] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:44:26.573] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:44:26.573] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:44:26.573] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:44:26.573] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:44:26.573] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:26.573] (PreFillP1                        :  24) @Run
[2018-01-12 18:44:26.573] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:44:26.623] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:44:26.623] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:44:26.623] (PreFillP2                        :  25) @Run
[2018-01-12 18:44:26.623] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:44:26.723] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:27.043] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:27.093] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:27.093] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:27.243] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:27.293] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:27.293] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:27.473] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:27.523] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:27.523] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:27.823] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:27.873] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:27.873] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:28.123] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:28.173] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:28.173] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:28.323] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:28.373] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:28.373] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:28.543] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:28.593] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:28.593] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:28.883] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:28.933] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:28.933] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:29.183] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:29.233] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:29.233] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:29.383] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:29.433] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:29.433] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:29.603] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:29.653] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:44:29.653] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:29.943] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:29.993] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:44:29.993] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:30.043] (PreFillP1                        :  24) @Stop
[2018-01-12 18:44:30.243] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:30.293] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:44:30.293] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:30.393] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:30.443] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:44:30.443] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:30.493] (PreFillP2                        :  25) @Stop
[2018-01-12 18:44:30.613] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:44:30.663] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:44:30.663] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:44:30.663] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:44:30.673] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:44:30.673] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:44:30.673] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:44:30.773] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:44:30.823] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:44:30.843] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:44:31.093] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:44:31.093] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:44:31.093] (Flush Capillary                  :  27) @Run
[2018-01-12 18:44:31.093] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:44:31.143] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:44:31.143] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:44:31.143] (Flush Singulator                 :  28) @Run
[2018-01-12 18:44:31.143] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:44:31.243] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:31.513] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:44:31.563] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:44:31.563] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:31.873] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:44:31.923] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:44:31.923] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:32.173] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:44:32.223] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:44:32.223] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:32.373] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:44:32.423] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:44:32.423] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:32.473] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:44:32.593] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:44:32.643] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:44:32.643] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:32.693] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:44:32.933] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:44:32.983] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:44:32.983] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:44:32.983] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:44:33.023] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:44:33.043] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:44:33.043] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:44:33.043] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:44:33.063] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:44:33.113] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:44:33.133] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:44:33.383] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:44:33.383] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:44:33.383] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:44:33.383] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:44:33.433] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:44:33.433] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:44:33.433] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:44:33.433] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:44:33.533] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:33.713] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:44:33.763] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:44:33.763] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:34.013] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:44:34.063] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:44:34.063] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:34.373] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:44:34.423] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:44:34.423] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:34.473] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:44:34.573] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:44:34.673] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:44:34.723] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:44:34.723] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:44:34.723] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:44:34.743] (Main Well                        :   0) Stop Pump
[2018-01-12 18:44:34.783] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:44:34.783] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:44:34.783] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:44:34.823] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:44:34.873] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:44:34.983] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:44:35.233] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:44:35.233] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:44:35.233] (Flush Capillary                  :  33) @Run
[2018-01-12 18:44:35.233] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:44:35.283] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:44:35.283] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:44:35.283] (Flush Singulator                 :  34) @Run
[2018-01-12 18:44:35.283] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:44:35.383] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:35.653] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:44:35.703] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:44:35.703] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:36.013] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:44:36.063] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:44:36.063] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:36.113] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:44:36.213] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:44:36.313] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:44:36.363] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:44:36.363] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:44:36.363] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:44:36.383] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:44:36.403] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:44:36.403] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:44:36.403] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:44:36.423] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:44:36.473] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:44:36.603] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:44:36.853] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:44:36.853] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:44:36.853] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:44:36.853] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:44:36.903] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:44:36.903] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:44:36.903] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:44:36.903] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:44:37.003] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:37.273] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:44:37.323] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:44:37.323] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:37.633] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:44:37.683] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:44:37.683] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:37.733] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:44:37.833] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:44:37.933] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:44:37.983] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:44:37.983] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:44:37.983] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:44:38.003] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:44:38.023] (Main Well                        :   0) Stop routine
[2018-01-12 18:44:38.023] (Main Well                        :   0) @Stop
[2018-01-12 18:44:38.103] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:44:38.103] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:44:38.113] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:44:38.113] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:44:38.193] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:44:38.193] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:44:40.103] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:44:40.103] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:44:40.103] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:44:40.103] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:44:40.213] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:44:40.213] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:44:26.013] (Detector                         :  17) @Stop
[2018-01-12 18:44:44.613] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:44:44.613] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:44:44.613] (MainPre Routine                  :   0) @Run
[2018-01-12 18:44:44.613] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:44:50.623] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:44:50.623] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:44:50.623] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:44:51.263] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:44:51.263] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:44:51.273] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:44:53.003] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:44:53.003] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:44:53.003] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:44:53.163] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:44:53.213] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:44:53.233] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:44:53.483] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:44:53.483] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:44:53.483] (Initialize P1                    :   3) @Run
[2018-01-12 18:44:53.483] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:44:53.533] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:44:53.533] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:44:53.533] (Initialize P2                    :   4) @Run
[2018-01-12 18:44:53.533] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:44:53.713] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:53.943] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:54.063] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:44:54.113] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:54.113] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:54.163] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:44:54.213] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:54.213] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:54.403] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:44:54.453] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:54.453] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:54.503] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:44:54.553] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:54.553] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:54.603] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:44:54.653] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:54.653] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:54.703] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:44:54.753] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:54.753] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:54.803] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:44:54.853] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:54.853] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:54.903] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:44:54.953] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:54.953] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:55.023] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:44:55.073] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:55.073] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:55.263] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:44:55.313] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:55.313] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:55.363] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:44:55.413] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:55.413] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:55.463] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:44:55.513] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:55.513] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:55.563] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:44:55.613] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:55.613] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:55.663] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:44:55.713] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:55.713] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:55.763] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:44:55.813] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:55.813] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:55.883] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:44:55.933] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:55.933] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:56.123] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:44:56.173] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:56.173] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:56.223] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:44:56.273] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:44:56.273] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:56.323] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:44:56.383] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:44:56.383] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:44:56.383] (Initialize P1                    :   3) @Stop
[2018-01-12 18:44:56.433] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:44:56.483] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:44:56.483] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:44:56.483] (Initialize P2                    :   4) @Stop
[2018-01-12 18:44:56.733] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:44:56.933] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:44:56.953] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:44:56.953] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:44:56.953] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:44:56.953] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:44:56.953] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:44:56.953] (PreFillP1                        :   6) @Run
[2018-01-12 18:44:56.953] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:44:57.003] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:44:57.003] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:44:57.003] (PreFillP2                        :   7) @Run
[2018-01-12 18:44:57.003] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:44:57.103] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:57.373] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:44:57.423] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:57.423] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:57.733] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:44:57.783] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:57.783] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:58.033] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:44:58.083] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:58.083] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:58.233] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:44:58.283] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:58.283] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:58.453] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:44:58.503] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:58.503] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:58.793] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:44:58.843] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:44:58.843] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:44:59.093] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:44:59.143] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:44:59.143] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:59.193] (PreFillP1                        :   6) @Stop
[2018-01-12 18:44:59.293] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:44:59.343] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:44:59.343] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:59.513] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:44:59.563] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:44:59.563] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:59.753] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:44:59.803] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:44:59.803] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:44:59.953] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:00.003] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:45:00.003] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:00.103] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:00.153] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:45:00.153] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:00.303] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:00.353] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:45:00.353] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:00.563] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:00.613] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:45:00.613] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:45:00.613] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:45:00.653] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:45:00.663] (PreFillP2                        :   7) @Stop
[2018-01-12 18:45:00.703] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:45:00.703] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:45:00.703] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:45:00.723] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:00.773] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:45:00.793] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:45:01.043] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:45:01.043] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:01.043] (Flush Capillary                  :   9) @Run
[2018-01-12 18:45:01.043] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:45:01.093] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:45:01.093] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:45:01.093] (Flush Singulator                 :  10) @Run
[2018-01-12 18:45:01.093] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:45:01.193] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:01.443] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:01.493] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:01.493] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:01.643] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:01.693] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:01.693] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:01.863] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:01.913] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:01.913] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:02.203] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:02.253] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:02.253] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:02.503] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:02.553] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:02.553] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:02.703] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:02.753] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:02.753] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:02.923] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:02.973] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:02.973] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:03.263] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:03.313] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:45:03.313] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:03.363] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:45:03.463] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:45:03.563] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:03.613] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:45:03.613] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:45:03.613] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:45:03.653] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:45:03.673] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:45:03.673] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:45:03.673] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:45:03.713] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:03.763] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:45:03.873] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:45:04.123] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:45:04.123] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:04.123] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:45:04.123] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:45:04.173] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:45:04.173] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:45:04.173] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:45:04.173] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:45:04.273] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:04.543] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:04.593] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:04.593] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:04.903] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:04.953] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:04.953] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:05.203] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:05.253] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:05.253] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:05.403] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:05.453] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:05.453] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:05.623] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:05.673] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:05.673] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:05.723] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:45:05.963] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:06.013] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:45:06.013] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:06.063] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:45:06.163] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:06.213] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:45:06.213] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:45:06.213] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:45:06.223] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:45:06.223] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:45:06.223] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:45:06.223] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:45:06.223] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:45:06.223] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:45:06.223] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:06.223] (PreFillP1                        :   6) @Run
[2018-01-12 18:45:06.223] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:45:06.273] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:45:06.273] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:45:06.273] (PreFillP2                        :   7) @Run
[2018-01-12 18:45:06.273] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:45:06.373] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:06.663] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:06.713] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:06.713] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:07.003] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:07.053] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:07.053] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:07.203] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:07.253] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:07.253] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:07.403] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:07.453] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:07.453] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:07.623] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:07.673] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:07.673] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:07.963] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:08.013] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:08.013] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:08.263] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:08.313] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:08.313] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:08.463] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:08.513] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:45:08.513] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:08.563] (PreFillP1                        :   6) @Stop
[2018-01-12 18:45:08.683] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:08.733] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:45:08.733] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:09.024] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:09.074] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:45:09.074] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:09.224] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:09.274] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:45:09.274] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:09.374] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:09.424] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:45:09.424] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:09.574] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:09.624] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:45:09.624] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:09.834] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:45:09.884] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:45:09.884] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:45:09.884] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:45:09.924] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:45:09.934] (PreFillP2                        :   7) @Stop
[2018-01-12 18:45:09.974] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:45:09.974] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:45:09.974] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:45:09.994] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:10.044] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:45:10.064] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:45:10.314] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:45:10.314] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:10.314] (Flush Capillary                  :   9) @Run
[2018-01-12 18:45:10.314] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:45:10.364] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:45:10.364] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:45:10.364] (Flush Singulator                 :  10) @Run
[2018-01-12 18:45:10.364] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:45:10.464] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:10.714] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:10.764] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:10.764] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:10.914] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:10.964] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:10.964] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:11.134] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:11.184] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:11.184] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:11.474] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:11.524] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:11.524] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:11.774] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:11.824] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:11.824] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:11.974] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:12.024] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:12.024] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:12.194] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:12.244] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:12.244] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:12.534] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:12.584] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:45:12.584] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:12.634] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:45:12.734] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:45:12.834] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:45:12.884] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:45:12.884] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:45:12.884] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:45:12.924] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:45:12.944] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:45:12.944] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:45:12.944] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:45:12.984] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:13.034] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:45:13.144] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:45:13.394] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:45:13.394] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:13.394] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:45:13.394] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:45:13.444] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:45:13.444] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:45:13.444] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:45:13.444] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:45:13.544] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:13.814] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:13.864] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:13.864] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:14.174] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:14.224] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:14.224] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:14.474] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:14.524] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:14.524] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:14.674] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:14.724] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:14.724] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:14.894] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:14.944] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:45:14.944] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:14.994] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:45:15.234] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:15.284] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:45:15.284] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:15.334] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:45:15.434] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:45:15.484] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:45:15.484] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:45:15.484] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:45:15.494] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:45:15.494] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:45:15.494] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:45:15.494] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:45:15.494] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:45:15.494] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:45:15.494] (Prefill before Flush             :  14) @Run
[2018-01-12 18:45:15.494] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:45:15.494] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:45:15.494] (PreFillP1                        :  15) @Run
[2018-01-12 18:45:15.494] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:45:15.544] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:45:15.544] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:45:15.544] (PreFillP2                        :  16) @Run
[2018-01-12 18:45:15.544] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:45:15.644] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:15.934] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:45:15.984] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:15.984] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:16.174] (PreFillP1                        :  15) @Stop
[2018-01-12 18:45:16.274] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:45:16.324] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:45:16.324] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:16.374] (PreFillP2                        :  16) @Stop
[2018-01-12 18:45:16.484] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:45:16.534] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:45:16.534] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:45:16.534] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:45:16.544] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:45:16.564] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:45:16.564] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:44:26.013] (Detector                         :   2) @Stop
[2018-01-12 18:45:16.684] ** STARTING A04 MAIN ROUTINE **
[2018-01-12 18:45:16.684] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:45:16.694] (Main Well                        :   0) @Run
[2018-01-12 18:45:16.694] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:45:16.694] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:45:16.694] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:45:16.694] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:45:16.694] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:45:16.694] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:45:16.694] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:45:16.694] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:45:16.694] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:45:16.694] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:45:17.234] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:45:17.234] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:45:17.244] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:45:17.254] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:45:17.394] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:45:17.394] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:45:17.394] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:45:17.394] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:45:17.394] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:45:17.394] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:45:17.394] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:45:17.394] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:45:17.394] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:45:17.414] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:45:17.464] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:45:17.484] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:45:17.734] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:45:17.734] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:45:17.734] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:45:17.734] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:45:17.784] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:45:17.784] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:45:17.784] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:45:17.784] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:45:17.884] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:18.154] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:45:18.204] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:45:18.204] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:18.514] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:45:18.564] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:45:18.564] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:18.814] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:45:18.864] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:45:18.864] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:19.014] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:45:19.064] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:45:19.064] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:19.134] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:45:19.374] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:45:19.424] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:45:19.424] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:19.474] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:45:19.574] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:45:19.624] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:45:19.624] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:45:19.624] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:45:19.624] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:45:19.624] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:45:19.684] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:45:19.734] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:45:19.794] (Main Well                        :   0) Move to Well 4 with z-offset of 2540 um (Wait)
[2018-01-12 18:45:22.044] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:22.144] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:45:22.194] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:45:22.194] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:22.294] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:45:22.344] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:45:22.344] (Main Well                        :   0) Stop Pump
[2018-01-12 18:45:22.504] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:45:22.564] (Main Well                        :   0) Move to Well 4 with z-offset of 310 um (Wait)
[2018-01-12 18:45:31.944] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:32.184] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:45:32.234] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:45:32.234] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:45:32.234] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:45:32.234] (Pickup Sample                    :  21) @Run
[2018-01-12 18:45:32.234] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:45:36.904] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:45:38.984] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:45:39.064] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:45:39.264] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:39.364] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:39.414] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:39.414] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:39.514] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:39.564] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:39.564] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:39.664] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:39.714] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:39.714] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:39.824] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:39.874] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:39.874] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:40.064] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:40.114] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:40.114] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:40.214] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:40.264] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:40.264] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:40.364] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:40.414] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:40.414] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:40.514] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:40.564] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:40.564] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:40.774] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:40.824] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:40.824] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:40.924] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:40.974] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:40.974] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:41.074] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:41.124] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:41.124] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:41.224] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:41.274] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:41.274] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:41.484] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:41.534] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:41.534] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:41.634] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:41.684] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:41.684] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:41.784] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:41.834] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:41.834] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:41.934] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:41.984] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:41.984] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:42.194] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:42.244] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:42.244] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:42.344] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:42.394] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:42.394] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:42.494] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:42.544] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:42.544] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:42.644] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:42.694] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:42.694] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:42.904] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:42.954] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:42.954] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:43.054] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:43.104] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:43.104] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:43.204] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:43.254] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:43.254] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:43.354] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:43.404] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:43.404] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:43.614] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:43.664] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:43.664] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:43.764] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:43.814] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:43.814] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:43.914] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:43.964] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:43.964] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:44.064] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:44.114] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:44.114] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:44.324] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:44.374] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:44.374] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:44.474] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:44.524] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:44.524] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:44.624] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:44.674] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:44.674] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:44.774] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:44.824] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:44.824] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:45.034] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:45.084] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:45.084] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:45.184] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:45.234] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:45.234] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:45.334] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:45.384] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:45.384] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:45.494] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:45.544] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:45.544] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:45.754] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:45.804] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:45.804] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:45.904] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:45.954] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:45.954] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:46.054] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:46.104] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:46.104] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:46.204] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:46.254] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:46.254] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:46.464] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:46.514] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:46.514] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:46.614] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:46.664] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:46.664] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:46.764] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:46.814] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:46.814] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:46.914] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:46.964] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:46.964] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:47.174] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:47.224] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:47.224] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:47.324] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:47.374] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:47.374] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:47.474] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:47.524] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:47.524] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:47.624] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:47.674] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:47.674] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:47.884] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:47.934] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:47.934] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:48.034] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:48.084] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:48.084] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:48.184] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:48.234] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:48.234] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:48.334] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:48.384] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:45:48.384] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:45:48.594] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:48.644] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:45:48.644] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:45:48.744] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:45:48.794] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:45:48.794] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:45:48.794] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:45:49.034] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:45:49.174] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:45:49.424] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:45:49.444] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:45:49.494] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:45:49.494] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:45:49.494] (Singulate Sample                 :  22) @Run
[2018-01-12 18:45:49.494] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:45:49.494] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:45:49.494] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:45:49.554] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:45:49.604] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:45:49.664] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:45:49.764] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_A04_RAW.qlb"
[2018-01-12 18:45:49.874] (Detector                         :   2) @Run
[2018-01-12 18:45:49.874] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:46:29.775] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:46:30.765] (Detector                         :   2) @Stop
[2018-01-12 18:46:30.775] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:46:30.775] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:46:30.915] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:46:30.965] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:46:30.965] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:31.065] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:46:31.115] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:46:31.115] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:46:31.115] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:46:31.495] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:46:31.495] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:46:31.495] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:46:31.495] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:46:31.495] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:46:31.495] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:46:31.495] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:31.495] (PreFillP1                        :  24) @Run
[2018-01-12 18:46:31.495] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:46:31.545] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:46:31.545] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:46:31.545] (PreFillP2                        :  25) @Run
[2018-01-12 18:46:31.545] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:46:31.645] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:31.915] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:31.965] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:46:31.965] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:32.115] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:32.165] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:46:32.165] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:32.475] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:32.525] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:46:32.525] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:32.775] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:32.825] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:46:32.825] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:32.975] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:33.025] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:46:33.025] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:33.195] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:33.245] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:46:33.245] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:33.545] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:33.595] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:46:33.595] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:33.845] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:33.895] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:46:33.895] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:34.045] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:34.095] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:46:34.095] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:34.265] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:34.315] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:46:34.315] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:34.605] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:34.655] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:46:34.655] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:46:34.705] (PreFillP1                        :  24) @Stop
[2018-01-12 18:46:34.905] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:34.955] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:46:34.955] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:46:35.055] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:35.105] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:46:35.105] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:46:35.275] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:46:35.325] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:46:35.325] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:46:35.325] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:46:35.345] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:46:35.345] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:46:35.345] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:46:35.435] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:46:35.485] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:46:35.535] (PreFillP2                        :  25) @Stop
[2018-01-12 18:46:35.555] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:46:35.805] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:46:35.805] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:46:35.805] (Flush Capillary                  :  27) @Run
[2018-01-12 18:46:35.805] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:46:35.855] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:46:35.855] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:46:35.855] (Flush Singulator                 :  28) @Run
[2018-01-12 18:46:35.855] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:46:35.955] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:36.245] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:46:36.295] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:46:36.295] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:36.585] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:46:36.635] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:46:36.635] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:36.785] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:46:36.835] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:46:36.835] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:36.985] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:46:37.035] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:46:37.035] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:37.205] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:46:37.255] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:46:37.255] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:46:37.305] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:46:37.545] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:46:37.595] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:46:37.595] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:46:37.595] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:46:37.645] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:46:37.645] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:46:37.665] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:46:37.665] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:46:37.665] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:46:37.685] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:46:37.735] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:46:37.755] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:46:38.005] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:46:38.005] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:46:38.005] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:46:38.005] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:46:38.055] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:46:38.055] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:46:38.055] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:46:38.055] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:46:38.155] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:38.325] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:46:38.375] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:46:38.375] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:38.625] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:46:38.675] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:46:38.675] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:38.985] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:46:39.035] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:46:39.035] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:46:39.085] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:46:39.185] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:46:39.285] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:46:39.335] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:46:39.335] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:46:39.335] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:46:39.365] (Main Well                        :   0) Stop Pump
[2018-01-12 18:46:39.405] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:46:39.405] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:46:39.405] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:46:39.445] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:46:39.495] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:46:39.605] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:46:39.855] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:46:39.855] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:46:39.855] (Flush Capillary                  :  33) @Run
[2018-01-12 18:46:39.855] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:46:39.905] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:46:39.905] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:46:39.905] (Flush Singulator                 :  34) @Run
[2018-01-12 18:46:39.905] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:46:40.005] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:40.275] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:46:40.325] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:46:40.325] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:40.635] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:46:40.685] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:46:40.685] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:46:40.735] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:46:40.835] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:46:40.935] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:46:40.985] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:46:40.985] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:46:40.985] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:46:41.005] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:46:41.025] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:46:41.025] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:46:41.025] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:46:41.045] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:46:41.095] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:46:41.225] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:46:41.475] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:46:41.475] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:46:41.475] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:46:41.475] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:46:41.525] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:46:41.525] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:46:41.525] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:46:41.525] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:46:41.625] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:41.895] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:46:41.945] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:46:41.945] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:42.255] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:46:42.305] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:46:42.305] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:46:42.355] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:46:42.455] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:46:42.555] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:46:42.605] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:46:42.605] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:46:42.605] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:46:42.625] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:46:42.645] (Main Well                        :   0) Stop routine
[2018-01-12 18:46:42.645] (Main Well                        :   0) @Stop
[2018-01-12 18:46:42.995] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:46:42.995] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:46:43.005] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:46:43.005] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:46:43.025] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:46:43.025] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:46:44.995] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:46:44.995] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:46:44.995] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:46:44.995] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:46:45.035] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:46:45.035] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:46:30.765] (Detector                         :  17) @Stop
[2018-01-12 18:46:49.635] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:46:49.635] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:46:49.635] (MainPre Routine                  :   0) @Run
[2018-01-12 18:46:49.635] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:46:55.735] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:46:55.735] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:46:55.735] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:46:56.375] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:46:56.375] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:46:56.385] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:46:58.115] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:46:58.115] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:46:58.115] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:46:58.275] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:46:58.325] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:46:58.345] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:46:58.595] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:46:58.595] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:46:58.595] (Initialize P1                    :   3) @Run
[2018-01-12 18:46:58.595] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:46:58.645] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:46:58.645] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:46:58.645] (Initialize P2                    :   4) @Run
[2018-01-12 18:46:58.645] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:46:58.825] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:59.055] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:46:59.175] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:46:59.225] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:46:59.225] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:59.275] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:46:59.325] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:46:59.325] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:46:59.515] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:46:59.565] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:46:59.565] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:59.615] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:46:59.665] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:46:59.665] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:46:59.715] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:46:59.765] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:46:59.765] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:46:59.815] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:46:59.865] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:46:59.865] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:46:59.915] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:46:59.965] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:46:59.965] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:00.015] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:47:00.065] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:47:00.065] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:00.135] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:47:00.185] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:47:00.185] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:00.375] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:47:00.425] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:47:00.425] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:00.475] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:47:00.525] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:47:00.525] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:00.575] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:47:00.625] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:47:00.625] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:00.675] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:47:00.725] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:47:00.725] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:00.775] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:47:00.825] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:47:00.825] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:00.875] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:47:00.925] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:47:00.925] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:00.995] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:47:01.045] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:47:01.045] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:01.235] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:47:01.285] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:47:01.285] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:01.335] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:47:01.385] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:47:01.385] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:01.445] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:47:01.495] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:47:01.495] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:47:01.495] (Initialize P1                    :   3) @Stop
[2018-01-12 18:47:01.545] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:47:01.595] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:47:01.595] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:47:01.595] (Initialize P2                    :   4) @Stop
[2018-01-12 18:47:01.845] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:47:02.045] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:47:02.065] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:47:02.065] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:47:02.065] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:47:02.065] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:47:02.065] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:02.065] (PreFillP1                        :   6) @Run
[2018-01-12 18:47:02.065] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:47:02.115] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:47:02.115] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:47:02.115] (PreFillP2                        :   7) @Run
[2018-01-12 18:47:02.115] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:47:02.215] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:02.495] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:02.545] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:02.545] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:02.855] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:02.905] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:02.905] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:03.155] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:03.205] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:03.205] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:03.355] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:03.405] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:03.405] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:03.715] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:03.765] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:03.765] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:04.015] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:04.065] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:04.065] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:04.215] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:04.265] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:47:04.265] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:04.315] (PreFillP1                        :   6) @Stop
[2018-01-12 18:47:04.435] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:04.485] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:47:04.485] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:04.775] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:04.825] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:47:04.825] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:04.975] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:05.025] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:47:05.025] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:05.125] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:05.175] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:47:05.175] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:05.325] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:05.375] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:47:05.375] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:05.595] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:05.645] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:47:05.645] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:05.695] (PreFillP2                        :   7) @Stop
[2018-01-12 18:47:05.795] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:05.845] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:47:05.845] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:47:05.845] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:47:05.865] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:47:05.905] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:47:05.905] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:47:05.905] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:47:05.925] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:05.975] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:47:05.995] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:47:06.245] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:47:06.245] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:06.245] (Flush Capillary                  :   9) @Run
[2018-01-12 18:47:06.245] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:47:06.295] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:47:06.295] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:47:06.295] (Flush Singulator                 :  10) @Run
[2018-01-12 18:47:06.295] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:47:06.395] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:06.665] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:06.715] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:06.715] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:07.025] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:07.075] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:07.075] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:07.325] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:07.375] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:07.375] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:07.525] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:07.575] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:07.575] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:07.745] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:07.795] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:07.795] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:08.085] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:08.135] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:08.135] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:08.385] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:08.435] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:47:08.435] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:08.485] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:47:08.585] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:08.635] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:47:08.635] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:47:08.635] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:47:08.655] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:47:08.685] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:47:08.725] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:47:08.725] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:47:08.725] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:47:08.885] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:08.935] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:47:08.955] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:47:09.205] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:47:09.205] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:09.205] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:47:09.205] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:47:09.257] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:47:09.257] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:47:09.257] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:47:09.257] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:47:09.357] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:09.627] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:09.677] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:09.677] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:09.987] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:10.037] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:10.037] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:10.287] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:10.337] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:10.337] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:10.487] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:10.537] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:10.537] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:10.707] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:10.757] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:10.757] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:10.807] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:47:11.047] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:11.097] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:47:11.097] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:11.147] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:47:11.247] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:11.297] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:47:11.297] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:47:11.297] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:47:11.327] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:47:11.327] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:47:11.327] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:47:11.327] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:47:11.327] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:47:11.327] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:47:11.327] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:11.327] (PreFillP1                        :   6) @Run
[2018-01-12 18:47:11.327] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:47:11.377] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:47:11.377] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:47:11.377] (PreFillP2                        :   7) @Run
[2018-01-12 18:47:11.377] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:47:11.477] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:11.767] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:11.817] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:11.817] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:12.107] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:12.157] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:12.157] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:12.307] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:12.357] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:12.357] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:12.507] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:12.557] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:12.557] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:12.727] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:12.777] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:12.777] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:13.067] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:13.117] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:13.117] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:13.367] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:13.417] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:13.417] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:13.567] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:13.617] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:47:13.617] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:13.667] (PreFillP1                        :   6) @Stop
[2018-01-12 18:47:13.787] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:13.837] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:47:13.837] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:14.127] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:14.177] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:47:14.177] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:14.327] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:14.377] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:47:14.377] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:14.477] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:14.527] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:47:14.527] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:14.677] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:14.727] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:47:14.727] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:14.937] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:47:14.987] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:47:14.987] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:47:14.987] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:47:15.027] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:47:15.037] (PreFillP2                        :   7) @Stop
[2018-01-12 18:47:15.077] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:47:15.077] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:47:15.077] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:47:15.097] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:15.147] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:47:15.167] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:47:15.417] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:47:15.417] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:15.417] (Flush Capillary                  :   9) @Run
[2018-01-12 18:47:15.417] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:47:15.467] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:47:15.467] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:47:15.467] (Flush Singulator                 :  10) @Run
[2018-01-12 18:47:15.467] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:47:15.567] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:15.817] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:15.867] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:15.867] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:16.017] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:16.067] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:16.067] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:16.237] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:16.287] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:16.287] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:16.577] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:16.627] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:16.627] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:16.877] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:16.927] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:16.927] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:17.077] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:17.127] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:17.127] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:17.297] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:17.347] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:17.347] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:17.637] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:17.687] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:47:17.687] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:17.737] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:47:17.837] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:47:17.937] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:47:17.987] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:47:17.987] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:47:17.987] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:47:18.027] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:47:18.047] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:47:18.047] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:47:18.047] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:47:18.087] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:18.137] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:47:18.247] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:47:18.497] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:47:18.497] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:18.497] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:47:18.497] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:47:18.547] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:47:18.547] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:47:18.547] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:47:18.547] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:47:18.647] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:18.917] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:18.967] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:18.967] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:19.277] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:19.327] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:19.327] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:19.577] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:19.627] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:19.627] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:19.777] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:19.827] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:19.827] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:19.997] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:20.047] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:47:20.047] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:20.097] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:47:20.337] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:20.387] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:47:20.387] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:20.437] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:47:20.537] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:47:20.587] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:47:20.587] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:47:20.587] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:47:20.597] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:47:20.597] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:47:20.597] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:47:20.597] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:47:20.597] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:47:20.597] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:47:20.597] (Prefill before Flush             :  14) @Run
[2018-01-12 18:47:20.597] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:47:20.597] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:47:20.597] (PreFillP1                        :  15) @Run
[2018-01-12 18:47:20.597] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:47:20.647] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:47:20.647] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:47:20.647] (PreFillP2                        :  16) @Run
[2018-01-12 18:47:20.647] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:47:20.747] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:21.037] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:47:21.087] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:21.087] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:21.277] (PreFillP1                        :  15) @Stop
[2018-01-12 18:47:21.377] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:47:21.427] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:47:21.427] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:21.477] (PreFillP2                        :  16) @Stop
[2018-01-12 18:47:21.577] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:47:21.627] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:47:21.627] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:47:21.627] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:47:21.647] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:47:21.667] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:47:21.667] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:46:30.765] (Detector                         :   2) @Stop
[2018-01-12 18:47:22.207] ** STARTING B04 MAIN ROUTINE **
[2018-01-12 18:47:22.207] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:47:22.207] (Main Well                        :   0) @Run
[2018-01-12 18:47:22.207] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:47:22.207] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:47:22.207] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:47:22.207] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:47:22.207] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:47:22.207] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:47:22.207] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:47:22.207] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:47:22.207] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:47:22.207] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:47:22.717] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:47:22.717] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:47:22.757] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:47:22.877] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:47:22.877] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:47:22.877] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:47:22.877] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:47:22.877] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:47:22.877] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:47:22.877] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:47:22.877] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:47:22.877] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:47:22.877] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:47:22.897] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:47:22.947] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:47:22.967] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:47:23.217] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:47:23.217] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:47:23.217] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:47:23.217] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:47:23.267] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:47:23.267] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:47:23.267] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:47:23.267] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:47:23.367] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:23.647] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:47:23.697] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:47:23.697] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:24.007] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:47:24.057] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:47:24.057] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:24.307] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:47:24.357] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:47:24.357] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:24.507] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:47:24.557] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:47:24.557] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:24.607] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:47:24.727] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:47:24.777] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:47:24.777] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:24.827] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:47:25.067] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:47:25.117] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:47:25.117] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:47:25.117] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:47:25.117] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:47:25.117] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:47:25.177] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:47:25.227] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:47:25.287] (Main Well                        :   0) Move to Well 16 with z-offset of 2540 um (Wait)
[2018-01-12 18:47:27.647] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:27.887] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:47:27.937] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:47:27.937] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:28.037] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:47:28.087] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:47:28.087] (Main Well                        :   0) Stop Pump
[2018-01-12 18:47:28.127] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:47:28.187] (Main Well                        :   0) Move to Well 16 with z-offset of 310 um (Wait)
[2018-01-12 18:47:37.847] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:38.087] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:47:38.137] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:47:38.137] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:47:38.137] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:47:38.137] (Pickup Sample                    :  21) @Run
[2018-01-12 18:47:38.137] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:47:42.807] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:47:44.887] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:47:44.967] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:47:45.167] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:45.267] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:45.317] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:45.317] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:45.417] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:45.467] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:45.467] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:45.567] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:45.617] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:45.617] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:45.727] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:45.777] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:45.777] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:45.967] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:46.017] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:46.017] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:46.117] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:46.167] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:46.167] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:46.267] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:46.317] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:46.317] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:46.417] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:46.467] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:46.467] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:46.677] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:46.727] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:46.727] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:46.827] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:46.877] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:46.877] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:46.977] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:47.027] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:47.027] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:47.127] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:47.177] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:47.177] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:47.397] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:47.447] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:47.447] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:47.547] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:47.597] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:47.597] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:47.697] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:47.747] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:47.747] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:47.847] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:47.897] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:47.897] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:48.107] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:48.157] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:48.157] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:48.257] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:48.307] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:48.307] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:48.407] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:48.457] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:48.457] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:48.557] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:48.607] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:48.607] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:48.817] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:48.867] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:48.867] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:48.967] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:49.017] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:49.017] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:49.117] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:49.167] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:49.167] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:49.267] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:49.317] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:49.317] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:49.527] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:49.577] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:49.577] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:49.677] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:49.727] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:49.727] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:49.827] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:49.877] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:49.877] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:49.977] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:50.027] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:50.027] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:50.237] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:50.287] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:50.287] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:50.387] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:50.437] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:50.437] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:50.537] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:50.587] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:50.587] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:50.687] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:50.737] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:50.737] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:50.947] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:50.997] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:50.997] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:51.097] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:51.147] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:51.147] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:51.247] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:51.297] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:51.297] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:51.397] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:51.447] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:51.447] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:51.657] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:51.707] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:51.707] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:51.807] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:51.857] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:51.857] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:51.957] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:52.007] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:52.007] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:52.107] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:52.157] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:52.157] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:52.367] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:52.417] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:52.417] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:52.517] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:52.567] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:52.567] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:52.667] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:52.717] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:52.717] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:52.817] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:52.867] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:52.867] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:53.077] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:53.127] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:53.127] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:53.227] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:53.277] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:53.277] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:53.377] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:53.427] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:53.427] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:53.527] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:53.577] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:53.577] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:53.787] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:53.837] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:53.837] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:53.937] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:53.987] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:53.987] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:54.087] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:54.137] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:54.137] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:54.237] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:54.287] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:47:54.287] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:47:54.497] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:54.547] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:47:54.547] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:47:54.647] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:47:54.697] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:47:54.697] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:47:54.697] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:47:54.937] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:47:55.077] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:47:55.327] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:47:55.347] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:47:55.397] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:47:55.397] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:47:55.397] (Singulate Sample                 :  22) @Run
[2018-01-12 18:47:55.397] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:47:55.397] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:47:55.397] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:47:55.457] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:47:55.507] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:47:55.567] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:47:55.667] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_B04_RAW.qlb"
[2018-01-12 18:47:55.777] (Detector                         :   2) @Run
[2018-01-12 18:47:55.777] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:48:35.678] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:48:36.738] (Detector                         :   2) @Stop
[2018-01-12 18:48:36.878] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:48:36.878] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:48:36.978] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:48:37.028] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:48:37.028] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:37.128] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:48:37.178] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:48:37.178] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:48:37.178] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:48:37.398] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:48:37.398] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:48:37.398] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:48:37.398] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:48:37.398] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:48:37.398] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:48:37.398] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:37.398] (PreFillP1                        :  24) @Run
[2018-01-12 18:48:37.398] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:48:37.448] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:48:37.448] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:48:37.448] (PreFillP2                        :  25) @Run
[2018-01-12 18:48:37.448] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:48:37.548] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:37.818] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:37.868] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:48:37.868] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:38.038] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:38.088] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:48:38.088] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:38.378] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:38.428] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:48:38.428] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:38.678] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:38.728] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:48:38.728] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:38.878] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:38.928] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:48:38.928] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:39.098] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:39.148] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:48:39.148] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:39.448] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:39.498] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:48:39.498] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:39.748] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:39.798] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:48:39.798] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:39.948] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:39.998] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:48:39.998] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:40.308] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:40.358] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:48:40.358] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:40.508] (PreFillP1                        :  24) @Stop
[2018-01-12 18:48:40.608] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:40.658] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:48:40.658] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:48:40.808] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:40.858] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:48:40.858] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:48:41.068] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:41.118] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:48:41.118] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:48:41.168] (PreFillP2                        :  25) @Stop
[2018-01-12 18:48:41.268] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:48:41.318] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:48:41.318] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:48:41.318] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:48:41.348] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:48:41.348] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:48:41.348] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:48:41.368] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:48:41.418] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:48:41.438] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:48:41.688] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:48:41.688] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:48:41.688] (Flush Capillary                  :  27) @Run
[2018-01-12 18:48:41.688] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:48:41.738] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:48:41.738] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:48:41.738] (Flush Singulator                 :  28) @Run
[2018-01-12 18:48:41.738] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:48:41.838] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:42.108] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:48:42.158] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:48:42.158] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:42.328] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:48:42.378] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:48:42.378] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:42.668] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:48:42.718] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:48:42.718] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:42.968] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:48:43.018] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:48:43.018] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:43.068] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:48:43.168] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:48:43.218] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:48:43.218] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:48:43.268] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:48:43.388] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:48:43.438] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:48:43.438] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:48:43.438] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:48:43.448] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:48:43.548] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:48:43.548] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:48:43.548] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:48:43.568] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:48:43.618] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:48:43.638] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:48:43.888] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:48:43.888] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:48:43.888] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:48:43.888] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:48:43.938] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:48:43.938] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:48:43.938] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:48:43.938] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:48:44.038] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:44.328] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:48:44.378] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:48:44.378] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:44.678] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:48:44.728] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:48:44.728] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:48:44.778] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:48:44.878] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:48:44.928] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:48:44.928] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:48:44.928] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:48:44.948] (Main Well                        :   0) Stop Pump
[2018-01-12 18:48:44.978] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:48:45.018] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:48:45.018] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:48:45.018] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:48:45.058] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:48:45.108] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:48:45.218] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:48:45.468] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:48:45.468] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:48:45.468] (Flush Capillary                  :  33) @Run
[2018-01-12 18:48:45.468] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:48:45.518] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:48:45.518] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:48:45.518] (Flush Singulator                 :  34) @Run
[2018-01-12 18:48:45.518] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:48:45.618] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:45.888] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:48:45.938] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:48:45.938] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:46.248] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:48:46.298] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:48:46.298] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:48:46.348] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:48:46.448] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:48:46.548] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:48:46.598] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:48:46.598] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:48:46.598] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:48:46.618] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:48:46.638] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:48:46.638] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:48:46.638] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:48:46.658] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:48:46.708] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:48:46.838] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:48:47.088] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:48:47.088] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:48:47.088] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:48:47.088] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:48:47.138] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:48:47.138] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:48:47.138] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:48:47.138] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:48:47.238] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:47.508] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:48:47.558] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:48:47.558] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:48:47.868] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:48:47.918] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:48:47.918] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:48:47.968] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:48:48.068] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:48:48.168] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:48:48.218] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:48:48.218] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:48:48.218] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:48:48.238] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:48:48.258] (Main Well                        :   0) Stop routine
[2018-01-12 18:48:48.258] (Main Well                        :   0) @Stop
[2018-01-12 18:48:48.538] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:48:48.538] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:48:48.548] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:48:48.548] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:48:48.548] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:48:48.548] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:48:50.538] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:48:50.538] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:48:50.538] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:48:50.538] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:48:50.578] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:48:50.578] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:48:36.738] (Detector                         :  17) @Stop
[2018-01-12 18:48:55.378] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:48:55.378] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:48:55.378] (MainPre Routine                  :   0) @Run
[2018-01-12 18:48:55.378] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:49:01.378] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:49:01.378] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:49:01.378] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:49:02.018] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:49:02.018] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:49:02.028] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:49:03.768] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:49:03.768] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:49:03.768] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:49:03.928] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:49:03.978] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:49:03.998] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:49:04.248] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:49:04.248] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:49:04.248] (Initialize P1                    :   3) @Run
[2018-01-12 18:49:04.248] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:49:04.298] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:49:04.298] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:49:04.298] (Initialize P2                    :   4) @Run
[2018-01-12 18:49:04.298] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:49:04.478] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:04.708] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:04.828] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:49:04.878] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:04.878] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:04.928] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:49:04.978] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:04.978] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:05.168] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:49:05.218] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:05.218] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:05.268] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:49:05.318] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:05.318] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:05.368] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:49:05.418] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:05.418] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:05.468] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:49:05.518] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:05.518] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:05.568] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:49:05.618] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:05.618] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:05.668] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:49:05.718] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:05.718] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:05.788] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:49:05.838] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:05.838] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:06.028] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:49:06.078] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:06.078] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:06.128] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:49:06.178] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:06.178] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:06.228] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:49:06.278] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:06.278] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:06.328] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:49:06.378] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:06.378] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:06.428] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:49:06.478] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:06.478] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:06.528] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:49:06.578] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:06.578] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:06.648] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:49:06.698] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:06.698] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:06.888] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:49:06.938] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:06.938] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:06.988] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:49:07.038] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:49:07.038] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:07.088] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:49:07.138] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:49:07.138] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:49:07.138] (Initialize P1                    :   3) @Stop
[2018-01-12 18:49:07.188] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:49:07.238] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:49:07.238] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:49:07.238] (Initialize P2                    :   4) @Stop
[2018-01-12 18:49:07.498] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:49:07.698] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:49:07.718] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:49:07.718] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:49:07.718] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:49:07.718] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:49:07.718] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:07.718] (PreFillP1                        :   6) @Run
[2018-01-12 18:49:07.718] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:49:07.768] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:49:07.768] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:49:07.768] (PreFillP2                        :   7) @Run
[2018-01-12 18:49:07.768] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:49:07.868] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:08.138] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:08.188] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:08.188] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:08.508] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:08.558] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:08.558] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:08.808] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:08.858] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:08.858] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:09.008] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:09.058] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:09.058] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:09.228] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:09.278] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:09.278] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:09.568] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:09.618] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:09.618] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:09.870] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:09.920] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:49:09.920] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:09.970] (PreFillP1                        :   6) @Stop
[2018-01-12 18:49:10.070] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:10.120] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:49:10.120] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:10.290] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:10.340] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:49:10.340] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:10.530] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:10.580] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:49:10.580] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:10.730] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:10.780] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:49:10.780] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:10.880] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:10.930] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:49:10.930] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:11.080] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:11.130] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:49:11.130] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:11.340] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:11.390] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:49:11.390] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:49:11.390] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:49:11.420] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:49:11.440] (PreFillP2                        :   7) @Stop
[2018-01-12 18:49:11.480] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:49:11.480] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:49:11.480] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:49:11.500] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:11.550] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:49:11.570] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:49:11.820] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:49:11.820] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:11.820] (Flush Capillary                  :   9) @Run
[2018-01-12 18:49:11.820] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:49:11.870] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:49:11.870] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:49:11.870] (Flush Singulator                 :  10) @Run
[2018-01-12 18:49:11.870] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:49:11.970] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:12.220] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:12.270] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:12.270] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:12.420] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:12.470] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:12.470] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:12.640] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:12.690] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:12.690] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:12.980] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:13.030] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:13.030] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:13.280] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:13.330] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:13.330] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:13.480] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:13.530] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:13.530] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:13.700] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:13.750] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:13.750] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:14.040] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:14.090] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:49:14.090] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:14.140] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:49:14.240] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:49:14.340] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:14.390] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:49:14.390] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:49:14.390] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:49:14.430] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:49:14.450] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:49:14.450] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:49:14.450] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:49:14.490] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:14.540] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:49:14.650] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:49:14.900] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:49:14.900] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:14.900] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:49:14.900] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:49:14.950] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:49:14.950] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:49:14.950] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:49:14.950] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:49:15.050] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:15.320] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:15.370] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:15.370] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:15.680] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:15.730] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:15.730] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:15.980] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:16.030] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:16.030] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:16.180] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:16.230] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:16.230] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:16.400] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:16.450] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:16.450] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:16.500] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:49:16.740] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:16.790] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:49:16.790] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:16.840] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:49:16.940] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:16.990] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:49:16.990] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:49:16.990] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:49:17.000] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:49:17.000] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:49:17.000] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:49:17.000] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:49:17.000] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:49:17.000] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:49:17.000] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:17.000] (PreFillP1                        :   6) @Run
[2018-01-12 18:49:17.000] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:49:17.050] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:49:17.050] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:49:17.050] (PreFillP2                        :   7) @Run
[2018-01-12 18:49:17.050] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:49:17.150] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:17.440] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:17.490] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:17.490] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:17.780] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:17.830] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:17.830] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:17.980] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:18.030] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:18.030] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:18.180] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:18.230] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:18.230] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:18.410] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:18.460] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:18.460] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:18.750] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:18.800] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:18.800] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:19.050] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:19.100] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:19.100] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:19.250] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:19.300] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:49:19.300] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:19.350] (PreFillP1                        :   6) @Stop
[2018-01-12 18:49:19.470] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:19.520] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:49:19.520] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:19.810] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:19.860] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:49:19.860] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:20.010] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:20.060] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:49:20.060] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:20.160] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:20.210] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:49:20.210] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:20.360] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:20.410] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:49:20.410] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:20.620] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:49:20.670] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:49:20.670] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:49:20.670] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:49:20.700] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:49:20.720] (PreFillP2                        :   7) @Stop
[2018-01-12 18:49:20.760] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:49:20.760] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:49:20.760] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:49:20.780] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:20.830] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:49:20.850] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:49:21.100] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:49:21.100] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:21.100] (Flush Capillary                  :   9) @Run
[2018-01-12 18:49:21.100] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:49:21.150] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:49:21.150] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:49:21.150] (Flush Singulator                 :  10) @Run
[2018-01-12 18:49:21.150] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:49:21.250] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:21.430] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:21.480] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:21.480] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:21.730] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:21.780] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:21.780] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:22.090] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:22.140] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:22.140] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:22.390] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:22.440] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:22.440] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:22.590] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:22.640] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:22.640] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:22.810] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:22.860] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:22.860] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:23.150] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:23.200] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:23.200] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:23.250] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:49:23.350] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:49:23.460] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:23.510] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:49:23.510] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:23.610] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:49:23.660] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:49:23.660] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:49:23.660] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:49:23.710] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:49:23.790] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:49:23.790] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:49:23.790] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:49:23.810] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:23.860] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:49:23.880] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:49:24.130] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:49:24.130] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:24.130] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:49:24.130] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:49:24.180] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:49:24.180] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:49:24.180] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:49:24.180] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:49:24.280] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:24.580] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:24.630] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:24.630] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:24.920] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:24.970] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:24.970] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:25.120] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:25.170] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:25.170] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:25.320] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:25.370] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:25.370] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:25.540] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:25.590] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:49:25.590] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:25.640] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:49:25.880] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:25.930] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:49:25.930] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:25.980] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:49:26.080] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:49:26.130] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:49:26.130] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:49:26.130] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:49:26.140] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:49:26.140] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:49:26.140] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:49:26.140] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:49:26.140] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:49:26.140] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:49:26.140] (Prefill before Flush             :  14) @Run
[2018-01-12 18:49:26.140] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:49:26.140] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:49:26.140] (PreFillP1                        :  15) @Run
[2018-01-12 18:49:26.140] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:49:26.190] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:49:26.190] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:49:26.190] (PreFillP2                        :  16) @Run
[2018-01-12 18:49:26.190] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:49:26.290] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:26.580] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:49:26.630] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:26.630] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:26.820] (PreFillP1                        :  15) @Stop
[2018-01-12 18:49:26.920] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:49:26.970] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:49:26.970] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:27.020] (PreFillP2                        :  16) @Stop
[2018-01-12 18:49:27.120] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:49:27.170] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:49:27.170] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:49:27.170] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:49:27.190] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:49:27.210] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:49:27.210] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:48:36.738] (Detector                         :   2) @Stop
[2018-01-12 18:49:27.450] ** STARTING C04 MAIN ROUTINE **
[2018-01-12 18:49:27.450] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:49:27.450] (Main Well                        :   0) @Run
[2018-01-12 18:49:27.450] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:49:27.450] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:49:27.450] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:49:27.450] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:49:27.450] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:49:27.450] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:49:27.450] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:49:27.450] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:49:27.450] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:49:27.450] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:49:27.960] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:49:27.960] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:49:28.000] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:49:28.120] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:49:28.120] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:49:28.120] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:49:28.120] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:49:28.120] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:49:28.120] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:49:28.120] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:49:28.120] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:49:28.120] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:49:28.120] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:49:28.140] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:49:28.190] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:49:28.210] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:49:28.460] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:49:28.460] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:49:28.460] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:49:28.460] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:49:28.510] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:49:28.510] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:49:28.510] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:49:28.510] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:49:28.610] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:28.880] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:49:28.930] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:49:28.930] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:29.240] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:49:29.290] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:49:29.290] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:29.540] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:49:29.590] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:49:29.590] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:29.740] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:49:29.790] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:49:29.790] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:29.860] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:49:30.100] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:49:30.150] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:49:30.150] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:30.200] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:49:30.300] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:49:30.350] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:49:30.350] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:49:30.350] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:49:30.350] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:49:30.350] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:49:30.410] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:49:30.460] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:49:30.520] (Main Well                        :   0) Move to Well 28 with z-offset of 2540 um (Wait)
[2018-01-12 18:49:33.190] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:33.290] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:49:33.340] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:49:33.340] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:33.550] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:49:33.600] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:49:33.600] (Main Well                        :   0) Stop Pump
[2018-01-12 18:49:33.640] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:49:33.700] (Main Well                        :   0) Move to Well 28 with z-offset of 310 um (Wait)
[2018-01-12 18:49:42.400] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:42.640] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:49:42.690] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:49:42.690] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:49:42.690] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:49:42.690] (Pickup Sample                    :  21) @Run
[2018-01-12 18:49:42.690] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:49:47.360] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:49:49.800] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:49:49.880] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:49:50.080] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:50.180] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:50.230] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:50.230] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:50.330] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:50.380] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:50.380] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:50.480] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:50.530] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:50.530] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:50.640] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:50.690] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:50.690] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:50.880] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:50.930] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:50.930] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:51.030] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:51.080] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:51.080] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:51.190] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:51.240] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:51.240] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:51.340] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:51.390] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:51.390] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:51.600] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:51.650] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:51.650] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:51.750] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:51.800] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:51.800] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:51.900] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:51.950] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:51.950] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:52.050] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:52.100] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:52.100] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:52.310] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:52.360] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:52.360] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:52.460] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:52.510] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:52.510] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:52.610] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:52.660] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:52.660] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:52.760] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:52.810] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:52.810] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:53.020] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:53.070] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:53.070] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:53.170] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:53.220] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:53.220] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:53.320] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:53.370] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:53.370] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:53.470] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:53.520] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:53.520] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:53.730] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:53.780] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:53.780] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:53.880] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:53.930] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:53.930] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:54.030] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:54.080] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:54.080] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:54.180] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:54.230] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:54.230] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:54.440] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:54.490] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:54.490] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:54.590] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:54.640] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:54.640] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:54.740] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:54.790] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:54.790] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:54.890] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:54.940] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:54.940] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:55.150] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:55.200] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:55.200] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:55.300] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:55.350] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:55.350] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:55.450] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:55.500] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:55.500] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:55.600] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:55.650] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:55.650] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:55.860] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:55.910] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:55.910] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:56.010] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:56.060] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:56.060] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:56.160] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:56.210] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:56.210] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:56.310] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:56.360] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:56.360] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:56.570] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:56.620] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:56.620] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:56.720] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:56.770] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:56.770] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:56.870] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:56.920] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:56.920] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:57.020] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:57.070] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:57.070] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:57.280] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:57.330] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:57.330] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:57.430] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:57.480] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:57.480] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:57.580] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:57.630] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:57.630] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:57.730] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:57.780] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:57.780] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:57.990] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:58.040] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:58.040] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:58.140] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:58.190] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:58.190] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:58.290] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:58.340] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:58.340] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:58.440] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:58.490] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:58.490] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:58.700] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:58.750] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:58.750] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:58.850] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:58.900] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:58.900] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:59.000] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:59.050] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:59.050] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:59.150] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:59.200] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:49:59.200] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:49:59.410] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:59.460] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:49:59.460] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:49:59.560] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:49:59.610] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:49:59.610] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:49:59.610] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:49:59.890] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:49:59.990] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:50:00.240] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:50:00.260] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:50:00.310] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:50:00.310] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:50:00.310] (Singulate Sample                 :  22) @Run
[2018-01-12 18:50:00.310] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:50:00.310] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:50:00.310] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:50:00.370] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:50:00.420] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:50:00.480] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:50:00.580] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_C04_RAW.qlb"
[2018-01-12 18:50:00.690] (Detector                         :   2) @Run
[2018-01-12 18:50:00.690] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:50:40.592] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:50:41.682] (Detector                         :   2) @Stop
[2018-01-12 18:50:41.792] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:50:41.792] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:50:41.892] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:50:41.942] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:50:41.942] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:42.042] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:50:42.092] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:50:42.092] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:50:42.092] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:50:42.312] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:50:42.312] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:50:42.312] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:50:42.312] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:50:42.312] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:50:42.312] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:50:42.312] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:42.312] (PreFillP1                        :  24) @Run
[2018-01-12 18:50:42.312] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:50:42.362] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:50:42.362] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:50:42.362] (PreFillP2                        :  25) @Run
[2018-01-12 18:50:42.362] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:50:42.462] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:42.752] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:42.802] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:50:42.802] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:42.972] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:43.022] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:50:43.022] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:43.312] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:43.362] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:50:43.362] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:43.612] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:43.662] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:50:43.662] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:43.812] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:43.862] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:50:43.862] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:44.032] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:44.082] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:50:44.082] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:44.372] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:44.422] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:50:44.422] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:44.682] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:44.732] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:50:44.732] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:44.882] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:44.932] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:50:44.932] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:45.242] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:45.292] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:50:45.292] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:50:45.442] (PreFillP1                        :  24) @Stop
[2018-01-12 18:50:45.542] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:45.592] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:50:45.592] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:50:45.742] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:45.792] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:50:45.792] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:50:46.002] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:46.052] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:50:46.052] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:50:46.102] (PreFillP2                        :  25) @Stop
[2018-01-12 18:50:46.202] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:50:46.252] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:50:46.252] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:50:46.252] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:50:46.262] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:50:46.262] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:50:46.262] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:50:46.282] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:50:46.332] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:50:46.352] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:50:46.602] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:50:46.602] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:50:46.602] (Flush Capillary                  :  27) @Run
[2018-01-12 18:50:46.602] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:50:46.652] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:50:46.652] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:50:46.652] (Flush Singulator                 :  28) @Run
[2018-01-12 18:50:46.652] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:50:46.752] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:47.022] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:50:47.072] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:50:47.072] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:47.242] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:50:47.292] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:50:47.292] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:47.582] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:50:47.632] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:50:47.632] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:47.882] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:50:47.932] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:50:47.932] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:47.982] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:50:48.082] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:50:48.132] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:50:48.132] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:50:48.182] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:50:48.302] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:50:48.352] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:50:48.352] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:50:48.352] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:50:48.362] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:50:48.462] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:50:48.462] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:50:48.462] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:50:48.482] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:50:48.532] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:50:48.552] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:50:48.802] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:50:48.802] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:50:48.802] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:50:48.802] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:50:48.852] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:50:48.852] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:50:48.852] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:50:48.852] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:50:48.952] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:49.242] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:50:49.292] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:50:49.292] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:49.582] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:50:49.632] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:50:49.632] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:50:49.682] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:50:49.782] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:50:49.832] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:50:49.832] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:50:49.832] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:50:49.862] (Main Well                        :   0) Stop Pump
[2018-01-12 18:50:49.882] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:50:49.922] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:50:49.922] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:50:49.922] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:50:49.962] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:50:50.012] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:50:50.122] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:50:50.372] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:50:50.372] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:50:50.372] (Flush Capillary                  :  33) @Run
[2018-01-12 18:50:50.372] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:50:50.422] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:50:50.422] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:50:50.422] (Flush Singulator                 :  34) @Run
[2018-01-12 18:50:50.422] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:50:50.522] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:50.792] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:50:50.842] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:50:50.842] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:51.152] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:50:51.202] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:50:51.202] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:50:51.252] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:50:51.352] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:50:51.452] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:50:51.502] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:50:51.502] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:50:51.502] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:50:51.522] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:50:51.542] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:50:51.542] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:50:51.542] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:50:51.562] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:50:51.612] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:50:51.742] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:50:51.992] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:50:51.992] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:50:51.992] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:50:51.992] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:50:52.042] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:50:52.042] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:50:52.042] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:50:52.042] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:50:52.142] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:52.412] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:50:52.462] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:50:52.462] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:50:52.772] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:50:52.822] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:50:52.822] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:50:52.872] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:50:52.972] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:50:53.072] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:50:53.122] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:50:53.122] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:50:53.122] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:50:53.142] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:50:53.162] (Main Well                        :   0) Stop routine
[2018-01-12 18:50:53.162] (Main Well                        :   0) @Stop
[2018-01-12 18:50:53.262] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:50:53.262] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:50:53.262] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:50:53.262] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:50:53.332] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:50:53.332] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:50:55.262] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:50:55.262] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:50:55.262] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:50:55.262] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:50:55.352] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:50:55.352] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:50:41.682] (Detector                         :  17) @Stop
[2018-01-12 18:51:10.703] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:51:10.703] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:51:10.703] (MainPre Routine                  :   0) @Run
[2018-01-12 18:51:10.703] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:51:16.803] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:51:16.803] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:51:16.803] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:51:17.443] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:51:17.443] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:51:17.453] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:51:19.183] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:51:19.183] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:51:19.183] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:51:19.343] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:51:19.393] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:51:19.413] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:51:19.663] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:51:19.663] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:51:19.663] (Initialize P1                    :   3) @Run
[2018-01-12 18:51:19.663] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:51:19.713] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:51:19.713] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:51:19.713] (Initialize P2                    :   4) @Run
[2018-01-12 18:51:19.713] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:51:19.893] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:20.123] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:20.243] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:51:20.293] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:20.293] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:20.343] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:51:20.393] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:20.393] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:20.593] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:51:20.643] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:20.643] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:20.693] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:51:20.743] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:20.743] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:20.793] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:51:20.843] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:20.843] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:20.893] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:51:20.943] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:20.943] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:20.993] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:51:21.043] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:21.043] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:21.093] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:51:21.143] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:21.143] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:21.243] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:51:21.293] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:21.293] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:21.483] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:51:21.533] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:21.533] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:21.583] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:51:21.633] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:21.633] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:21.683] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:51:21.733] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:21.733] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:21.783] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:51:21.833] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:21.833] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:21.883] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:51:21.933] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:21.933] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:21.983] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:51:22.033] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:22.033] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:22.103] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:51:22.153] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:22.153] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:22.343] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:51:22.393] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:51:22.393] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:51:22.393] (Initialize P1                    :   3) @Stop
[2018-01-12 18:51:22.443] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:51:22.493] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:51:22.493] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:22.593] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:51:22.643] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:51:22.643] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:51:22.643] (Initialize P2                    :   4) @Stop
[2018-01-12 18:51:22.713] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:51:22.913] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:51:22.933] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:51:22.933] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:51:22.933] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:51:22.933] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:51:22.933] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:22.933] (PreFillP1                        :   6) @Run
[2018-01-12 18:51:22.933] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:51:22.983] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:51:22.983] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:51:22.983] (PreFillP2                        :   7) @Run
[2018-01-12 18:51:22.983] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:51:23.083] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:23.353] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:23.403] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:23.403] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:23.553] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:23.603] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:23.603] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:23.913] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:23.963] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:23.963] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:24.213] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:24.263] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:24.263] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:24.413] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:24.463] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:24.463] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:24.633] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:24.683] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:24.683] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:24.973] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:25.023] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:25.023] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:25.173] (PreFillP1                        :   6) @Stop
[2018-01-12 18:51:25.273] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:25.323] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:51:25.323] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:25.473] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:25.523] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:51:25.523] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:25.733] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:25.783] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:51:25.783] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:25.933] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:25.983] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:51:25.983] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:26.083] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:26.133] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:51:26.133] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:26.283] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:26.333] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:51:26.333] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:26.543] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:26.593] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:51:26.593] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:51:26.593] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:51:26.633] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:51:26.643] (PreFillP2                        :   7) @Stop
[2018-01-12 18:51:26.683] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:51:26.683] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:51:26.683] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:51:26.703] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:26.753] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:51:26.773] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:51:27.023] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:51:27.023] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:27.023] (Flush Capillary                  :   9) @Run
[2018-01-12 18:51:27.023] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:51:27.073] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:51:27.073] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:51:27.073] (Flush Singulator                 :  10) @Run
[2018-01-12 18:51:27.073] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:51:27.173] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:27.423] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:27.473] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:27.473] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:27.623] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:27.673] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:27.673] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:27.843] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:27.893] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:27.893] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:28.183] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:28.233] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:28.233] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:28.483] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:28.533] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:28.533] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:28.683] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:28.733] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:28.733] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:28.903] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:28.953] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:28.953] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:29.243] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:29.293] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:51:29.293] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:29.343] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:51:29.443] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:51:29.543] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:29.593] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:51:29.593] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:51:29.593] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:51:29.633] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:51:29.653] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:51:29.653] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:51:29.653] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:51:29.693] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:29.743] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:51:29.853] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:51:30.103] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:51:30.103] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:30.103] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:51:30.103] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:51:30.153] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:51:30.153] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:51:30.153] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:51:30.153] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:51:30.253] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:30.523] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:30.573] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:30.573] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:30.883] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:30.933] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:30.933] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:31.183] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:31.233] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:31.233] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:31.383] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:31.433] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:31.433] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:31.603] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:31.653] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:31.653] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:31.703] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:51:31.943] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:31.993] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:51:31.993] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:32.043] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:51:32.143] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:32.193] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:51:32.193] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:51:32.193] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:51:32.203] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:51:32.203] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:51:32.203] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:51:32.203] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:51:32.203] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:51:32.203] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:51:32.203] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:32.203] (PreFillP1                        :   6) @Run
[2018-01-12 18:51:32.203] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:51:32.253] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:51:32.253] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:51:32.253] (PreFillP2                        :   7) @Run
[2018-01-12 18:51:32.253] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:51:32.353] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:32.643] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:32.693] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:32.693] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:32.983] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:33.033] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:33.033] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:33.183] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:33.233] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:33.233] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:33.383] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:33.433] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:33.433] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:33.603] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:33.653] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:33.653] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:33.943] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:33.993] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:33.993] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:34.243] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:34.293] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:34.293] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:34.453] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:34.503] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:51:34.503] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:34.553] (PreFillP1                        :   6) @Stop
[2018-01-12 18:51:34.673] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:34.723] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:51:34.723] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:35.013] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:35.063] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:51:35.063] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:35.213] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:35.263] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:51:35.263] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:35.363] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:35.413] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:51:35.413] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:35.563] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:35.613] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:51:35.613] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:35.823] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:51:35.873] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:51:35.873] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:51:35.873] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:51:35.903] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:51:35.923] (PreFillP2                        :   7) @Stop
[2018-01-12 18:51:35.963] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:51:35.963] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:51:35.963] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:51:35.983] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:36.033] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:51:36.053] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:51:36.303] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:51:36.303] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:36.303] (Flush Capillary                  :   9) @Run
[2018-01-12 18:51:36.303] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:51:36.353] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:51:36.353] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:51:36.353] (Flush Singulator                 :  10) @Run
[2018-01-12 18:51:36.353] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:51:36.453] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:36.703] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:36.753] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:36.753] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:36.903] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:36.953] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:36.953] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:37.123] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:37.173] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:37.173] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:37.473] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:37.523] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:37.523] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:37.773] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:37.823] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:37.823] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:37.973] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:38.023] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:38.023] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:38.333] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:38.383] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:38.383] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:38.433] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:51:38.533] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:51:38.633] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:38.683] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:51:38.683] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:38.783] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:51:38.833] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:51:38.833] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:51:38.833] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:51:38.863] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:51:38.963] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:51:38.963] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:51:38.963] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:51:38.983] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:39.033] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:51:39.053] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:51:39.303] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:51:39.303] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:39.303] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:51:39.303] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:51:39.353] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:51:39.353] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:51:39.353] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:51:39.353] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:51:39.453] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:39.743] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:39.793] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:39.793] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:40.083] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:40.133] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:40.133] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:40.283] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:40.333] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:40.333] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:40.483] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:40.533] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:40.533] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:40.703] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:40.753] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:51:40.753] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:40.803] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:51:41.043] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:41.093] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:51:41.093] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:41.143] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:51:41.243] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:51:41.293] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:51:41.293] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:51:41.293] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:51:41.313] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:51:41.313] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:51:41.313] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:51:41.313] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:51:41.313] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:51:41.313] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:51:41.313] (Prefill before Flush             :  14) @Run
[2018-01-12 18:51:41.313] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:51:41.313] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:51:41.313] (PreFillP1                        :  15) @Run
[2018-01-12 18:51:41.313] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:51:41.363] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:51:41.363] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:51:41.363] (PreFillP2                        :  16) @Run
[2018-01-12 18:51:41.363] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:51:41.463] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:41.753] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:51:41.803] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:51:41.803] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:41.993] (PreFillP1                        :  15) @Stop
[2018-01-12 18:51:42.093] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:51:42.143] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:51:42.143] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:42.193] (PreFillP2                        :  16) @Stop
[2018-01-12 18:51:42.293] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:51:42.343] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:51:42.343] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:51:42.343] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:51:42.363] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:51:42.383] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:51:42.383] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:50:41.682] (Detector                         :   2) @Stop
[2018-01-12 18:51:42.773] ** STARTING D04 MAIN ROUTINE **
[2018-01-12 18:51:42.773] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:51:42.773] (Main Well                        :   0) @Run
[2018-01-12 18:51:42.773] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:51:42.783] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:51:42.783] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:51:42.783] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:51:42.783] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:51:42.783] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:51:42.783] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:51:42.783] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:51:42.783] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:51:42.783] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:51:43.283] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:51:43.283] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:51:43.333] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:51:43.443] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:51:43.443] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:51:43.443] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:51:43.443] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:51:43.443] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:51:43.443] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:51:43.443] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:51:43.443] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:51:43.443] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:51:43.443] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:51:43.463] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:51:43.513] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:51:43.533] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:51:43.783] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:51:43.783] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:51:43.783] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:51:43.783] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:51:43.833] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:51:43.833] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:51:43.833] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:51:43.833] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:51:43.933] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:44.203] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:51:44.253] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:51:44.253] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:44.563] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:51:44.613] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:51:44.613] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:44.863] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:51:44.913] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:51:44.913] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:45.063] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:51:45.113] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:51:45.113] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:45.163] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:51:45.283] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:51:45.333] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:51:45.333] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:45.383] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:51:45.623] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:51:45.673] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:51:45.673] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:51:45.673] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:51:45.673] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:51:45.673] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:51:45.733] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:51:45.783] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:51:45.843] (Main Well                        :   0) Move to Well 40 with z-offset of 2540 um (Wait)
[2018-01-12 18:51:48.703] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:51:48.943] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:51:48.993] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:51:48.993] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:49.093] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:51:49.143] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:51:49.143] (Main Well                        :   0) Stop Pump
[2018-01-12 18:51:49.183] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:51:49.243] (Main Well                        :   0) Move to Well 40 with z-offset of 310 um (Wait)
[2018-01-12 18:51:58.123] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:51:58.363] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:51:58.413] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:51:58.413] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:51:58.413] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:51:58.413] (Pickup Sample                    :  21) @Run
[2018-01-12 18:51:58.413] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:52:03.083] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:52:05.523] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:52:05.603] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:52:05.803] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:05.903] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:05.953] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:05.953] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:06.053] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:06.103] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:06.103] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:06.203] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:06.253] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:06.253] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:06.363] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:06.413] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:06.413] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:06.613] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:06.663] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:06.663] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:06.763] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:06.813] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:06.813] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:06.913] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:06.963] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:06.963] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:07.063] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:07.113] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:07.113] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:07.323] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:07.373] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:07.373] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:07.473] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:07.523] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:07.523] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:07.623] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:07.673] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:07.673] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:07.773] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:07.823] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:07.823] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:08.033] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:08.083] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:08.083] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:08.183] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:08.233] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:08.233] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:08.333] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:08.383] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:08.383] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:08.483] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:08.533] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:08.533] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:08.743] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:08.793] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:08.793] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:08.893] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:08.943] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:08.943] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:09.043] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:09.093] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:09.093] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:09.193] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:09.243] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:09.243] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:09.453] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:09.503] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:09.503] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:09.603] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:09.653] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:09.653] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:09.753] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:09.803] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:09.803] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:09.903] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:09.953] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:09.953] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:10.163] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:10.213] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:10.213] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:10.313] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:10.363] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:10.363] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:10.473] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:10.523] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:10.523] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:10.623] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:10.673] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:10.673] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:10.883] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:10.933] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:10.933] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:11.033] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:11.083] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:11.083] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:11.183] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:11.233] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:11.233] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:11.333] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:11.383] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:11.383] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:11.593] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:11.643] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:11.643] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:11.743] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:11.793] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:11.793] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:11.893] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:11.943] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:11.943] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:12.043] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:12.093] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:12.093] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:12.303] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:12.353] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:12.353] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:12.453] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:12.503] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:12.503] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:12.603] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:12.653] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:12.653] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:12.753] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:12.803] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:12.803] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:13.013] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:13.063] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:13.063] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:13.163] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:13.213] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:13.213] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:13.313] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:13.363] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:13.363] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:13.463] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:13.513] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:13.513] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:13.723] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:13.773] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:13.773] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:13.873] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:13.923] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:13.923] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:14.023] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:14.073] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:14.073] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:14.173] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:14.223] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:14.223] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:14.433] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:14.483] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:14.483] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:14.583] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:14.633] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:14.633] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:14.733] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:14.783] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:14.783] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:14.883] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:14.933] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:14.933] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:15.143] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:15.193] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:52:15.193] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:52:15.293] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:52:15.343] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:52:15.343] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:52:15.343] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:52:15.613] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:52:15.723] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:52:15.973] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:52:15.993] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:52:16.043] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:52:16.043] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:52:16.043] (Singulate Sample                 :  22) @Run
[2018-01-12 18:52:16.043] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:52:16.043] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:52:16.043] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:52:16.103] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:52:16.153] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:52:16.213] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:52:16.313] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_D04_RAW.qlb"
[2018-01-12 18:52:16.423] (Detector                         :   2) @Run
[2018-01-12 18:52:16.423] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:52:56.324] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:52:57.404] (Detector                         :   2) @Stop
[2018-01-12 18:52:57.524] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:52:57.524] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:52:57.624] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:52:57.674] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:52:57.674] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:52:57.774] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:52:57.824] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:52:57.824] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:52:57.824] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:52:58.044] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:52:58.044] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:52:58.044] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:52:58.044] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:52:58.044] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:52:58.044] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:52:58.044] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:52:58.044] (PreFillP1                        :  24) @Run
[2018-01-12 18:52:58.044] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:52:58.094] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:52:58.094] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:52:58.094] (PreFillP2                        :  25) @Run
[2018-01-12 18:52:58.094] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:52:58.194] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:52:58.464] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:52:58.514] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:58.514] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:52:58.684] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:52:58.734] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:58.734] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:52:59.044] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:52:59.094] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:59.094] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:52:59.344] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:52:59.394] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:59.394] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:52:59.554] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:52:59.604] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:59.604] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:52:59.914] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:52:59.964] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:52:59.964] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:00.214] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:53:00.264] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:53:00.264] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:00.414] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:53:00.464] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:53:00.464] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:00.634] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:53:00.684] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:53:00.684] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:00.974] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:53:01.024] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:53:01.024] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:53:01.184] (PreFillP1                        :  24) @Stop
[2018-01-12 18:53:01.294] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:53:01.344] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:53:01.344] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:53:01.494] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:53:01.544] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:53:01.544] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:53:01.754] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:53:01.804] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:53:01.804] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:53:01.804] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:53:01.854] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:53:01.854] (PreFillP2                        :  25) @Stop
[2018-01-12 18:53:01.854] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:53:01.854] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:53:01.874] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:53:01.924] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:53:01.944] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:53:02.194] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:53:02.194] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:53:02.194] (Flush Capillary                  :  27) @Run
[2018-01-12 18:53:02.194] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:53:02.244] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:53:02.244] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:53:02.244] (Flush Singulator                 :  28) @Run
[2018-01-12 18:53:02.244] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:53:02.344] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:02.534] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:53:02.584] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:53:02.584] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:02.834] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:53:02.884] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:53:02.884] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:03.194] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:53:03.244] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:53:03.244] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:03.494] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:53:03.544] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:53:03.544] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:03.694] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:53:03.744] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:53:03.744] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:53:03.794] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:53:03.914] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:53:03.964] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:53:03.964] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:53:03.964] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:53:04.004] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:53:04.014] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:53:04.174] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:53:04.174] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:53:04.174] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:53:04.194] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:53:04.244] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:53:04.264] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:53:04.514] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:53:04.514] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:53:04.514] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:53:04.514] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:53:04.564] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:53:04.564] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:53:04.564] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:53:04.564] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:53:04.664] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:04.954] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:53:05.004] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:53:05.004] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:05.294] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:53:05.344] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:53:05.344] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:53:05.394] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:53:05.494] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:53:05.544] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:53:05.544] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:53:05.544] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:53:05.574] (Main Well                        :   0) Stop Pump
[2018-01-12 18:53:05.594] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:53:05.634] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:53:05.634] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:53:05.634] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:53:05.674] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:53:05.724] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:53:05.834] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:53:06.084] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:53:06.084] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:53:06.084] (Flush Capillary                  :  33) @Run
[2018-01-12 18:53:06.084] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:53:06.134] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:53:06.134] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:53:06.134] (Flush Singulator                 :  34) @Run
[2018-01-12 18:53:06.134] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:53:06.234] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:06.504] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:53:06.554] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:53:06.554] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:06.864] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:53:06.914] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:53:06.914] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:53:06.964] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:53:07.064] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:53:07.164] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:53:07.214] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:53:07.214] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:53:07.214] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:53:07.234] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:53:07.254] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:53:07.254] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:53:07.254] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:53:07.274] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:53:07.324] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:53:07.454] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:53:07.704] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:53:07.704] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:53:07.704] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:53:07.704] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:53:07.754] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:53:07.754] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:53:07.754] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:53:07.754] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:53:07.854] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:08.124] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:53:08.174] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:53:08.174] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:53:08.484] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:53:08.534] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:53:08.534] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:53:08.584] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:53:08.684] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:53:08.784] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:53:08.834] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:53:08.834] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:53:08.834] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:53:08.854] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:53:08.874] (Main Well                        :   0) Stop routine
[2018-01-12 18:53:08.874] (Main Well                        :   0) @Stop
[2018-01-12 18:53:09.084] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:53:09.084] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:53:09.084] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:53:09.084] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:53:09.084] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:53:09.084] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:53:11.086] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:53:11.086] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:53:11.086] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:53:11.086] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:53:11.126] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:53:11.126] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:52:57.404] (Detector                         :  17) @Stop
[2018-01-12 18:54:30.908] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:54:30.908] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:54:30.908] (MainPre Routine                  :   0) @Run
[2018-01-12 18:54:30.908] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:54:36.968] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:54:36.968] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:54:36.968] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:54:37.608] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:54:37.608] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:54:37.618] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:54:39.348] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:54:39.348] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:54:39.348] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:54:39.508] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:54:39.558] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:54:39.578] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:54:39.828] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:54:39.828] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:54:39.828] (Initialize P1                    :   3) @Run
[2018-01-12 18:54:39.828] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:54:39.878] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:54:39.878] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:54:39.878] (Initialize P2                    :   4) @Run
[2018-01-12 18:54:39.878] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:54:40.058] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:40.288] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:40.408] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:54:40.458] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:40.458] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:40.508] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:54:40.558] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:40.558] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:40.748] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:54:40.798] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:40.798] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:40.848] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:54:40.898] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:40.898] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:40.948] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:54:40.998] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:40.998] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:41.048] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:54:41.098] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:41.098] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:41.148] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:54:41.198] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:41.198] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:41.248] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:54:41.298] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:41.298] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:41.368] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:54:41.418] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:41.418] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:41.608] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:54:41.658] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:41.658] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:41.708] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:54:41.758] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:41.758] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:41.808] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:54:41.858] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:41.858] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:41.908] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:54:41.958] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:41.958] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:42.008] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:54:42.058] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:42.058] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:42.108] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:54:42.158] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:42.158] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:42.228] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:54:42.278] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:42.278] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:42.468] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:54:42.518] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:42.518] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:42.568] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:54:42.618] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:54:42.618] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:42.668] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:54:42.718] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:54:42.718] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:54:42.718] (Initialize P1                    :   3) @Stop
[2018-01-12 18:54:42.768] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:54:42.818] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:54:42.818] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:54:42.818] (Initialize P2                    :   4) @Stop
[2018-01-12 18:54:43.078] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:54:43.278] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:54:43.298] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:54:43.298] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:54:43.298] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:54:43.298] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:54:43.298] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:43.298] (PreFillP1                        :   6) @Run
[2018-01-12 18:54:43.298] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:54:43.348] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:54:43.348] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:54:43.348] (PreFillP2                        :   7) @Run
[2018-01-12 18:54:43.348] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:54:43.448] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:43.718] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:43.768] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:54:43.768] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:44.078] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:44.128] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:54:44.128] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:44.378] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:44.428] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:54:44.428] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:44.588] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:44.638] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:54:44.638] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:44.808] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:44.858] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:54:44.858] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:45.148] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:45.198] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:54:45.198] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:45.448] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:45.498] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:54:45.498] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:45.548] (PreFillP1                        :   6) @Stop
[2018-01-12 18:54:45.648] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:45.698] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:54:45.698] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:45.868] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:45.918] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:54:45.918] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:46.108] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:46.158] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:54:46.158] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:46.308] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:46.358] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:54:46.358] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:46.458] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:46.508] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:54:46.508] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:46.658] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:46.708] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:54:46.708] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:46.918] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:46.968] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:54:46.968] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:54:46.968] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:54:46.998] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:54:47.018] (PreFillP2                        :   7) @Stop
[2018-01-12 18:54:47.058] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:54:47.058] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:54:47.058] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:54:47.078] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:47.128] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:54:47.148] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:54:47.398] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:54:47.398] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:47.398] (Flush Capillary                  :   9) @Run
[2018-01-12 18:54:47.398] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:54:47.448] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:54:47.448] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:54:47.448] (Flush Singulator                 :  10) @Run
[2018-01-12 18:54:47.448] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:54:47.548] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:47.798] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:47.848] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:47.848] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:47.998] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:48.048] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:48.048] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:48.218] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:48.268] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:48.268] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:48.558] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:48.608] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:48.608] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:48.858] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:48.908] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:48.908] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:49.058] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:49.108] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:49.108] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:49.278] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:49.328] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:49.328] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:49.618] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:49.668] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:54:49.668] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:49.718] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:54:49.818] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:54:49.918] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:49.968] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:54:49.968] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:54:49.968] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:54:50.008] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:54:50.028] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:54:50.028] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:54:50.028] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:54:50.068] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:54:50.118] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:54:50.228] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:54:50.478] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:54:50.478] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:54:50.478] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:54:50.478] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:54:50.528] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:54:50.528] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:54:50.528] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:54:50.528] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:54:50.628] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:50.898] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:54:50.948] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:50.948] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:51.258] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:54:51.308] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:51.308] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:51.558] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:54:51.608] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:51.608] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:51.758] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:54:51.808] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:51.808] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:51.978] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:54:52.028] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:52.028] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:52.078] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:54:52.318] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:54:52.368] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:54:52.368] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:52.418] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:54:52.528] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:54:52.578] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:54:52.578] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:54:52.578] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:54:52.628] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:54:52.628] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:54:52.628] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:54:52.628] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:54:52.628] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:54:52.628] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:54:52.628] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:52.628] (PreFillP1                        :   6) @Run
[2018-01-12 18:54:52.628] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:54:52.678] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:54:52.678] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:54:52.678] (PreFillP2                        :   7) @Run
[2018-01-12 18:54:52.678] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:54:52.778] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:53.068] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:53.118] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:54:53.118] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:53.408] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:53.458] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:54:53.458] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:53.608] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:53.658] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:54:53.658] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:53.808] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:53.858] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:54:53.858] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:54.028] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:54.078] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:54:54.078] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:54.368] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:54.418] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:54:54.418] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:54.668] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:54.718] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:54:54.718] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:54.868] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:54.918] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:54:54.918] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:54.968] (PreFillP1                        :   6) @Stop
[2018-01-12 18:54:55.088] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:55.138] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:54:55.138] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:55.428] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:55.478] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:54:55.478] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:55.628] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:55.678] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:54:55.678] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:55.778] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:55.828] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:54:55.828] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:55.978] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:56.028] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:54:56.028] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:56.238] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:54:56.288] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:54:56.288] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:54:56.288] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:54:56.328] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:54:56.338] (PreFillP2                        :   7) @Stop
[2018-01-12 18:54:56.378] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:54:56.378] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:54:56.378] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:54:56.398] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:56.448] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:54:56.468] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:54:56.718] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:54:56.718] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:56.718] (Flush Capillary                  :   9) @Run
[2018-01-12 18:54:56.718] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:54:56.768] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:54:56.768] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:54:56.768] (Flush Singulator                 :  10) @Run
[2018-01-12 18:54:56.768] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:54:56.868] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:57.118] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:57.168] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:57.168] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:57.318] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:57.368] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:57.368] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:57.538] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:57.588] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:57.588] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:57.878] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:57.928] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:57.928] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:58.178] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:58.228] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:58.228] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:58.378] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:58.428] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:58.428] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:58.598] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:58.648] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:54:58.648] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:54:58.938] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:58.988] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:54:58.988] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:54:59.038] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:54:59.138] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:54:59.238] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:54:59.288] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:54:59.288] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:54:59.288] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:54:59.328] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:54:59.348] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:54:59.348] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:54:59.348] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:54:59.388] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:54:59.438] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:54:59.548] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:54:59.798] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:54:59.798] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:54:59.798] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:54:59.798] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:54:59.848] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:54:59.848] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:54:59.848] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:54:59.848] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:54:59.948] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:00.218] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:55:00.268] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:55:00.268] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:00.578] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:55:00.628] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:55:00.628] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:00.878] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:55:00.928] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:55:00.928] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:01.078] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:55:01.128] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:55:01.128] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:01.298] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:55:01.348] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:55:01.348] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:01.398] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:55:01.638] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:55:01.688] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:55:01.688] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:01.738] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:55:01.838] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:55:01.888] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:55:01.888] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:55:01.888] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:55:01.898] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:55:01.898] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:55:01.898] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:55:01.898] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:55:01.898] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:55:01.898] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:55:01.898] (Prefill before Flush             :  14) @Run
[2018-01-12 18:55:01.898] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:55:01.898] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:55:01.898] (PreFillP1                        :  15) @Run
[2018-01-12 18:55:01.898] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:55:01.948] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:55:01.948] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:55:01.948] (PreFillP2                        :  16) @Run
[2018-01-12 18:55:01.948] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:55:02.048] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:02.338] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:55:02.388] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:02.388] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:02.588] (PreFillP1                        :  15) @Stop
[2018-01-12 18:55:02.688] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:55:02.738] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:55:02.738] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:02.788] (PreFillP2                        :  16) @Stop
[2018-01-12 18:55:02.888] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:55:02.938] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:55:02.938] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:55:02.938] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:55:02.948] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:55:02.968] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:55:02.968] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:52:57.404] (Detector                         :   2) @Stop
[2018-01-12 18:55:03.478] ** STARTING E04 MAIN ROUTINE **
[2018-01-12 18:55:03.478] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:55:03.488] (Main Well                        :   0) @Run
[2018-01-12 18:55:03.488] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:55:03.488] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:55:03.488] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:55:03.488] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:55:03.488] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:55:03.488] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:55:03.488] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:55:03.488] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:55:03.488] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:55:03.488] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:55:03.988] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:55:03.988] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:55:04.038] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:55:04.148] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:55:04.148] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:55:04.148] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:55:04.148] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:55:04.148] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:55:04.148] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:55:04.148] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:55:04.148] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:55:04.148] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:55:04.148] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:55:04.168] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:55:04.218] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:55:04.238] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:55:04.488] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:55:04.488] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:55:04.488] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:55:04.488] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:55:04.538] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:55:04.538] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:55:04.538] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:55:04.538] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:55:04.638] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:04.908] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:55:04.958] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:55:04.958] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:05.268] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:55:05.318] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:55:05.318] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:05.568] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:55:05.618] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:55:05.618] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:05.768] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:55:05.818] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:55:05.818] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:05.868] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:55:05.988] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:55:06.038] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:55:06.038] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:06.088] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:55:06.328] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:55:06.378] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:55:06.378] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:55:06.378] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:55:06.378] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:55:06.378] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:55:06.438] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:55:06.488] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:55:06.548] (Main Well                        :   0) Move to Well 52 with z-offset of 2540 um (Wait)
[2018-01-12 18:55:09.468] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:09.708] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:55:09.758] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:55:09.758] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:09.858] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:55:09.908] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:55:09.908] (Main Well                        :   0) Stop Pump
[2018-01-12 18:55:09.948] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:55:10.008] (Main Well                        :   0) Move to Well 52 with z-offset of 310 um (Wait)
[2018-01-12 18:55:19.008] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:19.248] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:55:19.298] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:55:19.298] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:55:19.298] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:55:19.298] (Pickup Sample                    :  21) @Run
[2018-01-12 18:55:19.298] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:55:23.968] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:55:26.588] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:55:26.668] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:55:26.868] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:26.968] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:27.018] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:27.018] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:27.118] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:27.168] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:27.168] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:27.268] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:27.318] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:27.318] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:27.428] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:27.478] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:27.478] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:27.668] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:27.718] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:27.718] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:27.818] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:27.868] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:27.868] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:27.968] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:28.018] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:28.018] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:28.118] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:28.168] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:28.168] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:28.378] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:28.428] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:28.428] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:28.528] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:28.578] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:28.578] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:28.678] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:28.728] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:28.728] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:28.828] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:28.878] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:28.878] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:29.088] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:29.138] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:29.138] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:29.238] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:29.288] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:29.288] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:29.388] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:29.438] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:29.438] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:29.538] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:29.588] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:29.588] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:29.798] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:29.848] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:29.848] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:29.948] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:29.998] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:29.998] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:30.098] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:30.148] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:30.148] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:30.248] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:30.298] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:30.298] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:30.508] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:30.558] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:30.558] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:30.658] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:30.708] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:30.708] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:30.808] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:30.858] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:30.858] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:30.958] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:31.008] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:31.008] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:31.218] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:31.268] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:31.268] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:31.368] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:31.418] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:31.418] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:31.518] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:31.568] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:31.568] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:31.668] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:31.718] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:31.718] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:31.928] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:31.978] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:31.978] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:32.078] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:32.128] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:32.128] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:32.228] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:32.278] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:32.278] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:32.378] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:32.428] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:32.428] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:32.638] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:32.688] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:32.688] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:32.788] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:32.838] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:32.838] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:32.938] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:32.988] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:32.988] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:33.088] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:33.138] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:33.138] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:33.348] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:33.398] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:33.398] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:33.498] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:33.548] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:33.548] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:33.648] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:33.698] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:33.698] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:33.798] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:33.848] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:33.848] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:34.058] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:34.108] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:34.108] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:34.208] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:34.258] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:34.258] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:34.358] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:34.408] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:34.408] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:34.518] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:34.568] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:34.568] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:34.778] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:34.828] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:34.828] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:34.928] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:34.978] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:34.978] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:35.078] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:35.128] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:35.128] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:35.228] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:35.278] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:35.278] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:35.488] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:35.538] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:35.538] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:35.638] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:35.688] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:35.688] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:35.788] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:35.838] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:35.838] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:35.938] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:35.988] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:55:35.988] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:55:36.198] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:36.248] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:55:36.248] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:55:36.348] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:55:36.398] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:55:36.398] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:55:36.398] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:55:36.698] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:55:36.778] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:55:37.028] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:55:37.048] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:55:37.098] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:55:37.098] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:55:37.098] (Singulate Sample                 :  22) @Run
[2018-01-12 18:55:37.098] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:55:37.098] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:55:37.098] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:55:37.158] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:55:37.208] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:55:37.268] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:55:37.368] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_E04_RAW.qlb"
[2018-01-12 18:55:37.478] (Detector                         :   2) @Run
[2018-01-12 18:55:37.478] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:56:17.378] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:56:18.448] (Detector                         :   2) @Stop
[2018-01-12 18:56:18.578] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:56:18.578] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:56:18.678] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:56:18.728] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:56:18.728] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:18.828] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:56:18.878] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:56:18.878] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:56:18.878] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:56:19.098] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:56:19.098] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:56:19.098] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:56:19.098] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:56:19.098] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:56:19.098] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:56:19.098] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:19.098] (PreFillP1                        :  24) @Run
[2018-01-12 18:56:19.098] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:56:19.148] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:56:19.148] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:56:19.148] (PreFillP2                        :  25) @Run
[2018-01-12 18:56:19.148] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:56:19.248] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:19.518] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:19.568] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:56:19.568] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:19.718] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:19.768] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:56:19.768] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:20.088] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:20.138] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:56:20.138] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:20.388] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:20.438] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:56:20.438] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:20.588] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:20.638] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:56:20.638] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:20.948] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:20.998] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:56:20.998] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:21.248] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:21.298] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:56:21.298] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:21.448] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:21.498] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:56:21.498] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:21.668] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:21.718] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:56:21.718] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:22.008] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:22.058] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:56:22.058] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:22.208] (PreFillP1                        :  24) @Stop
[2018-01-12 18:56:22.308] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:22.358] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:56:22.358] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:56:22.508] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:22.558] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:56:22.558] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:56:22.768] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:22.818] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:56:22.818] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:56:22.868] (PreFillP2                        :  25) @Stop
[2018-01-12 18:56:22.968] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:56:23.018] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:56:23.018] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:56:23.018] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:56:23.048] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:56:23.048] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:56:23.048] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:56:23.068] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:56:23.118] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:56:23.138] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:56:23.388] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:56:23.388] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:56:23.388] (Flush Capillary                  :  27) @Run
[2018-01-12 18:56:23.388] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:56:23.438] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:56:23.438] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:56:23.438] (Flush Singulator                 :  28) @Run
[2018-01-12 18:56:23.438] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:56:23.538] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:23.828] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:56:23.878] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:56:23.878] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:24.048] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:56:24.098] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:56:24.098] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:24.388] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:56:24.438] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:56:24.438] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:24.688] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:56:24.738] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:56:24.738] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:24.788] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:56:24.888] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:56:24.938] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:56:24.938] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:56:24.988] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:56:25.108] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:56:25.158] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:56:25.158] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:56:25.158] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:56:25.198] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:56:25.268] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:56:25.268] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:56:25.268] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:56:25.288] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:56:25.338] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:56:25.358] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:56:25.608] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:56:25.608] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:56:25.608] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:56:25.608] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:56:25.658] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:56:25.658] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:56:25.658] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:56:25.658] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:56:25.758] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:26.048] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:56:26.098] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:56:26.098] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:26.388] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:56:26.438] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:56:26.438] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:56:26.488] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:56:26.588] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:56:26.638] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:56:26.638] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:56:26.638] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:56:26.668] (Main Well                        :   0) Stop Pump
[2018-01-12 18:56:26.688] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:56:26.728] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:56:26.728] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:56:26.728] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:56:26.768] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:56:26.818] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:56:26.928] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:56:27.178] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:56:27.178] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:56:27.178] (Flush Capillary                  :  33) @Run
[2018-01-12 18:56:27.178] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:56:27.228] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:56:27.228] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:56:27.228] (Flush Singulator                 :  34) @Run
[2018-01-12 18:56:27.228] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:56:27.328] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:27.598] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:56:27.648] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:56:27.648] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:27.958] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:56:28.008] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:56:28.008] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:56:28.058] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:56:28.158] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:56:28.258] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:56:28.308] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:56:28.308] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:56:28.308] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:56:28.328] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:56:28.348] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:56:28.348] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:56:28.348] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:56:28.368] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:56:28.418] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:56:28.548] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:56:28.798] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:56:28.798] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:56:28.798] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:56:28.798] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:56:28.848] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:56:28.848] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:56:28.848] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:56:28.848] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:56:28.948] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:29.218] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:56:29.268] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:56:29.268] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:56:29.578] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:56:29.628] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:56:29.628] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:56:29.678] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:56:29.778] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:56:29.878] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:56:29.928] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:56:29.928] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:56:29.928] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:56:29.948] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:56:29.968] (Main Well                        :   0) Stop routine
[2018-01-12 18:56:29.968] (Main Well                        :   0) @Stop
[2018-01-12 18:56:30.308] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:56:30.308] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:56:30.318] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:56:30.318] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:56:30.318] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:56:30.318] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:56:32.308] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:56:32.308] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:56:32.308] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:56:32.308] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:56:32.348] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:56:32.348] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:56:18.448] (Detector                         :  17) @Stop
[2018-01-12 18:57:44.978] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:57:44.978] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:57:44.978] (MainPre Routine                  :   0) @Run
[2018-01-12 18:57:44.978] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:57:50.898] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:57:50.898] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:57:50.898] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:57:51.538] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:57:51.538] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:57:51.548] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:57:53.278] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:57:53.278] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:57:53.278] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 18:57:53.438] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:57:53.488] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 18:57:53.508] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 18:57:53.758] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 18:57:53.758] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 18:57:53.758] (Initialize P1                    :   3) @Run
[2018-01-12 18:57:53.758] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 18:57:53.808] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 18:57:53.808] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 18:57:53.808] (Initialize P2                    :   4) @Run
[2018-01-12 18:57:53.808] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 18:57:53.988] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:54.218] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:57:54.338] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:57:54.388] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:54.388] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:54.438] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:57:54.488] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:54.488] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:57:54.678] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:57:54.728] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:54.728] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:54.778] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:57:54.828] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:54.828] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:57:54.878] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:57:54.928] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:54.928] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:54.978] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:57:55.028] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:55.028] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:57:55.078] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:57:55.128] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:55.128] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:55.178] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:57:55.228] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:55.228] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:57:55.298] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:57:55.348] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:55.348] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:55.538] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:57:55.588] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:55.588] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:57:55.638] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:57:55.688] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:55.688] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:55.738] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:57:55.788] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:55.788] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:57:55.838] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:57:55.888] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:55.888] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:55.938] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:57:55.988] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:55.988] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:57:56.038] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:57:56.088] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:56.088] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:56.158] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:57:56.208] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:56.208] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:57:56.398] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:57:56.448] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:56.448] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:56.498] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:57:56.548] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 18:57:56.548] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 18:57:56.598] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 18:57:56.648] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 18:57:56.648] (Initialize P1                    :   3) Stop routine
[2018-01-12 18:57:56.648] (Initialize P1                    :   3) @Stop
[2018-01-12 18:57:56.698] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 18:57:56.748] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 18:57:56.748] (Initialize P2                    :   4) Stop routine
[2018-01-12 18:57:56.748] (Initialize P2                    :   4) @Stop
[2018-01-12 18:57:57.008] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 18:57:57.208] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 18:57:57.228] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 18:57:57.228] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:57:57.228] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:57:57.228] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:57:57.228] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:57:57.228] (PreFillP1                        :   6) @Run
[2018-01-12 18:57:57.228] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:57:57.278] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:57:57.278] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:57:57.278] (PreFillP2                        :   7) @Run
[2018-01-12 18:57:57.278] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:57:57.378] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:57.648] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:57:57.698] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:57:57.698] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:58.008] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:57:58.058] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:57:58.058] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:58.308] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:57:58.358] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:57:58.358] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:58.508] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:57:58.558] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:57:58.558] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:58.728] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:57:58.778] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:57:58.778] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:59.068] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:57:59.118] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:57:59.118] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:57:59.368] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:57:59.418] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:57:59.418] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:57:59.468] (PreFillP1                        :   6) @Stop
[2018-01-12 18:57:59.568] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:57:59.618] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:57:59.618] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:57:59.788] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:57:59.838] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:57:59.838] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:00.028] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:00.078] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:58:00.078] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:00.228] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:00.278] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:58:00.278] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:00.378] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:00.428] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:58:00.428] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:00.578] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:00.628] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:58:00.628] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:00.838] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:00.888] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:58:00.888] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:58:00.888] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:58:00.928] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:58:00.938] (PreFillP2                        :   7) @Stop
[2018-01-12 18:58:00.978] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:58:00.978] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:58:00.978] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:58:00.998] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:01.048] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:58:01.068] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:58:01.318] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:58:01.318] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:01.318] (Flush Capillary                  :   9) @Run
[2018-01-12 18:58:01.318] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:58:01.368] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:58:01.368] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:58:01.368] (Flush Singulator                 :  10) @Run
[2018-01-12 18:58:01.368] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:58:01.468] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:01.718] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:01.768] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:01.768] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:01.918] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:01.968] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:01.968] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:02.138] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:02.188] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:02.188] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:02.478] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:02.528] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:02.528] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:02.778] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:02.828] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:02.828] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:02.978] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:03.028] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:03.028] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:03.198] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:03.248] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:03.248] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:03.538] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:03.588] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:58:03.588] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:03.638] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:58:03.738] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:58:03.838] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:03.888] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:58:03.888] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:58:03.888] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:58:03.928] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:58:03.948] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:58:03.948] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:58:03.948] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:58:03.988] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:04.038] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:58:04.148] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:58:04.398] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:58:04.398] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:04.398] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:58:04.398] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:58:04.448] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:58:04.448] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:58:04.448] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:58:04.448] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:58:04.548] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:04.818] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:04.868] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:04.868] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:05.178] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:05.228] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:05.228] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:05.478] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:05.528] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:05.528] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:05.678] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:05.728] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:05.728] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:05.898] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:05.948] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:05.948] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:05.998] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:58:06.238] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:06.288] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:58:06.288] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:06.338] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:58:06.438] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:06.488] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:58:06.488] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:58:06.488] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:58:06.498] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 18:58:06.498] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 18:58:06.498] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 18:58:06.498] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 18:58:06.498] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 18:58:06.498] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:58:06.498] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:06.498] (PreFillP1                        :   6) @Run
[2018-01-12 18:58:06.498] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 18:58:06.548] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:58:06.548] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 18:58:06.548] (PreFillP2                        :   7) @Run
[2018-01-12 18:58:06.548] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 18:58:06.648] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:06.938] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:06.988] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:06.988] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:07.278] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:07.328] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:07.328] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:07.478] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:07.528] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:07.528] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:07.678] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:07.728] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:07.728] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:07.898] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:07.948] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:07.948] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:08.238] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:08.288] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:08.288] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:08.538] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:08.588] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:08.588] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:08.738] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:08.788] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:58:08.788] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:08.838] (PreFillP1                        :   6) @Stop
[2018-01-12 18:58:08.958] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:09.008] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:58:09.008] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:09.298] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:09.348] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:58:09.348] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:09.498] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:09.548] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:58:09.548] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:09.648] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:09.698] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:58:09.698] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:09.868] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:09.918] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:58:09.918] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:10.108] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 18:58:10.158] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:58:10.158] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 18:58:10.158] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 18:58:10.198] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 18:58:10.208] (PreFillP2                        :   7) @Stop
[2018-01-12 18:58:10.248] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:58:10.248] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 18:58:10.248] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 18:58:10.268] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:10.318] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 18:58:10.338] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 18:58:10.588] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:58:10.588] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:10.588] (Flush Capillary                  :   9) @Run
[2018-01-12 18:58:10.588] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 18:58:10.638] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:58:10.638] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 18:58:10.638] (Flush Singulator                 :  10) @Run
[2018-01-12 18:58:10.638] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 18:58:10.738] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:10.988] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:11.038] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:11.038] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:11.188] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:11.238] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:11.238] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:11.408] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:11.458] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:11.458] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:11.748] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:11.798] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:11.798] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:12.050] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:12.100] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:12.100] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:12.250] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:12.300] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:12.300] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:12.470] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:12.520] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:12.520] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:12.810] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:12.860] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:58:12.860] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:12.910] (Flush Singulator                 :  10) @Stop
[2018-01-12 18:58:13.010] (Flush Capillary                  :   9) @Stop
[2018-01-12 18:58:13.110] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 18:58:13.160] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:58:13.160] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 18:58:13.160] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 18:58:13.200] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 18:58:13.220] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:58:13.220] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 18:58:13.220] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 18:58:13.260] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:13.310] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 18:58:13.420] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 18:58:13.670] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:58:13.670] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:13.670] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 18:58:13.670] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 18:58:13.720] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:58:13.720] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 18:58:13.720] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 18:58:13.720] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 18:58:13.820] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:14.090] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:14.140] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:14.140] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:14.450] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:14.500] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:14.500] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:14.750] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:14.800] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:14.800] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:14.950] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:15.000] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:15.000] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:15.170] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:15.220] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:58:15.220] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:15.270] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 18:58:15.520] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:15.570] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:58:15.570] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:15.620] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 18:58:15.720] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 18:58:15.770] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:58:15.770] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 18:58:15.770] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 18:58:15.820] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 18:58:15.820] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 18:58:15.820] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 18:58:15.820] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 18:58:15.820] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 18:58:15.820] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 18:58:15.820] (Prefill before Flush             :  14) @Run
[2018-01-12 18:58:15.820] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:58:15.820] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:58:15.820] (PreFillP1                        :  15) @Run
[2018-01-12 18:58:15.820] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:58:15.870] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:58:15.870] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 18:58:15.870] (PreFillP2                        :  16) @Run
[2018-01-12 18:58:15.870] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 18:58:15.970] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:16.260] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:58:16.310] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:16.310] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:16.500] (PreFillP1                        :  15) @Stop
[2018-01-12 18:58:16.600] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:58:16.650] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:58:16.650] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:16.700] (PreFillP2                        :  16) @Stop
[2018-01-12 18:58:16.800] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 18:58:16.850] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:58:16.850] (Prefill before Flush             :  14) Stop routine
[2018-01-12 18:58:16.850] (Prefill before Flush             :  14) @Stop
[2018-01-12 18:58:16.870] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 18:58:16.890] (MainPre Routine                  :   0) Stop routine
[2018-01-12 18:58:16.890] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:56:18.448] (Detector                         :   2) @Stop
[2018-01-12 18:58:17.060] ** STARTING F04 MAIN ROUTINE **
[2018-01-12 18:58:17.060] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:58:17.060] (Main Well                        :   0) @Run
[2018-01-12 18:58:17.060] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 18:58:17.070] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 18:58:17.070] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 18:58:17.070] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 18:58:17.070] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 18:58:17.070] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 18:58:17.070] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 18:58:17.070] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:58:17.070] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:58:17.070] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:58:17.570] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:58:17.570] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:58:17.620] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 18:58:17.730] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 18:58:17.730] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 18:58:17.730] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 18:58:17.730] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 18:58:17.730] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 18:58:17.730] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 18:58:17.730] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 18:58:17.730] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 18:58:17.730] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 18:58:17.730] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:58:17.750] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:58:17.800] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:58:17.820] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:58:18.070] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 18:58:18.070] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:58:18.070] (PreWet Tip from P2               :  19) @Run
[2018-01-12 18:58:18.070] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:58:18.120] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 18:58:18.120] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 18:58:18.120] (PreWet Tip from P1               :  20) @Run
[2018-01-12 18:58:18.120] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 18:58:18.220] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:18.490] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:58:18.540] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:58:18.540] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:18.850] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:58:18.900] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:58:18.900] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:19.150] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:58:19.200] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:58:19.200] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:19.350] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:58:19.400] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 18:58:19.400] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:19.450] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 18:58:19.570] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:58:19.620] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 18:58:19.620] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:19.670] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 18:58:19.910] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:58:19.960] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 18:58:19.960] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 18:58:19.960] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 18:58:19.960] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 18:58:19.960] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:58:20.020] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:58:20.070] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 18:58:20.130] (Main Well                        :   0) Move to Well 64 with z-offset of 2540 um (Wait)
[2018-01-12 18:58:23.070] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:23.310] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:58:23.360] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 18:58:23.360] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:23.460] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:58:23.510] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 18:58:23.510] (Main Well                        :   0) Stop Pump
[2018-01-12 18:58:23.550] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 18:58:23.610] (Main Well                        :   0) Move to Well 64 with z-offset of 310 um (Wait)
[2018-01-12 18:58:32.920] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:33.160] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:58:33.210] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 18:58:33.210] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 18:58:33.210] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 18:58:33.210] (Pickup Sample                    :  21) @Run
[2018-01-12 18:58:33.210] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 18:58:37.880] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 18:58:40.500] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 18:58:40.580] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 18:58:40.780] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:40.880] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:40.930] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:40.930] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:41.030] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:41.080] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:41.080] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:41.180] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:41.230] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:41.230] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:41.340] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:41.390] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:41.390] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:41.580] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:41.630] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:41.630] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:41.730] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:41.780] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:41.780] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:41.880] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:41.930] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:41.930] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:42.030] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:42.080] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:42.080] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:42.290] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:42.340] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:42.340] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:42.440] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:42.490] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:42.490] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:42.590] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:42.640] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:42.640] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:42.740] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:42.790] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:42.790] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:43.000] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:43.050] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:43.050] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:43.150] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:43.200] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:43.200] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:43.300] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:43.350] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:43.350] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:43.450] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:43.500] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:43.500] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:43.710] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:43.760] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:43.760] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:43.860] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:43.910] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:43.910] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:44.010] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:44.060] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:44.060] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:44.160] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:44.210] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:44.210] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:44.420] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:44.470] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:44.470] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:44.570] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:44.620] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:44.620] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:44.720] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:44.770] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:44.770] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:44.870] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:44.920] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:44.920] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:45.130] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:45.180] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:45.180] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:45.280] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:45.330] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:45.330] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:45.430] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:45.480] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:45.480] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:45.580] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:45.630] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:45.630] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:45.840] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:45.890] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:45.890] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:45.990] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:46.040] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:46.040] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:46.140] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:46.190] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:46.190] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:46.290] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:46.340] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:46.340] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:46.550] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:46.600] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:46.600] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:46.700] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:46.750] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:46.750] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:46.850] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:46.900] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:46.900] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:47.000] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:47.050] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:47.050] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:47.260] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:47.310] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:47.310] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:47.410] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:47.460] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:47.460] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:47.560] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:47.610] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:47.610] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:47.710] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:47.760] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:47.760] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:47.970] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:48.020] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:48.020] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:48.120] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:48.170] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:48.170] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:48.270] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:48.320] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:48.320] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:48.420] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:48.470] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:48.470] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:48.680] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:48.730] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:48.730] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:48.830] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:48.880] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:48.880] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:48.980] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:49.030] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:49.030] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:49.130] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:49.180] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:49.180] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:49.390] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:49.440] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:49.440] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:49.540] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:49.590] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:49.590] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:49.690] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:49.740] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:49.740] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:49.840] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:49.890] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:58:49.890] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 18:58:50.100] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:50.150] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 18:58:50.150] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 18:58:50.250] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 18:58:50.300] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 18:58:50.300] (Pickup Sample                    :  21) Stop routine
[2018-01-12 18:58:50.300] (Pickup Sample                    :  21) @Stop
[2018-01-12 18:58:50.610] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 18:58:50.680] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 18:58:50.930] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 18:58:50.950] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 18:58:51.000] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 18:58:51.000] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 18:58:51.000] (Singulate Sample                 :  22) @Run
[2018-01-12 18:58:51.000] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 18:58:51.000] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 18:58:51.000] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 18:58:51.060] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:58:51.110] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 18:58:51.170] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 18:58:51.270] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_F04_RAW.qlb"
[2018-01-12 18:58:51.380] (Detector                         :   2) @Run
[2018-01-12 18:58:51.380] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 18:59:31.280] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 18:59:32.350] (Detector                         :   2) @Stop
[2018-01-12 18:59:32.480] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 18:59:32.480] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 18:59:32.590] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:59:32.640] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 18:59:32.640] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:32.740] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 18:59:32.790] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 18:59:32.790] (Singulate Sample                 :  22) Stop routine
[2018-01-12 18:59:32.790] (Singulate Sample                 :  22) @Stop
[2018-01-12 18:59:33.000] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 18:59:33.000] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 18:59:33.000] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 18:59:33.000] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 18:59:33.000] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 18:59:33.000] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 18:59:33.000] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:33.000] (PreFillP1                        :  24) @Run
[2018-01-12 18:59:33.000] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 18:59:33.050] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 18:59:33.050] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 18:59:33.050] (PreFillP2                        :  25) @Run
[2018-01-12 18:59:33.050] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 18:59:33.150] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:33.420] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:33.470] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:59:33.470] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:33.620] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:33.670] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:59:33.670] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:33.980] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:34.030] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:59:34.030] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:34.280] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:34.330] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:59:34.330] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:34.480] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:34.530] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:59:34.530] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:34.700] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:34.750] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:59:34.750] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:35.040] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:35.090] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:59:35.090] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:35.340] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:35.390] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:59:35.390] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:35.540] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:35.590] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:59:35.590] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:35.760] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:35.810] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 18:59:35.810] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:36.100] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:36.150] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 18:59:36.150] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:59:36.200] (PreFillP1                        :  24) @Stop
[2018-01-12 18:59:36.400] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:36.450] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:59:36.450] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:59:36.550] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:36.600] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 18:59:36.600] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 18:59:36.770] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 18:59:36.820] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 18:59:36.820] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 18:59:36.820] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 18:59:36.850] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:59:36.850] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 18:59:36.850] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 18:59:37.010] (PreFillP2                        :  25) @Stop
[2018-01-12 18:59:37.030] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:59:37.080] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 18:59:37.100] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 18:59:37.350] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:59:37.350] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:59:37.350] (Flush Capillary                  :  27) @Run
[2018-01-12 18:59:37.350] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 18:59:37.400] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:59:37.400] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 18:59:37.400] (Flush Singulator                 :  28) @Run
[2018-01-12 18:59:37.400] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 18:59:37.500] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:37.930] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:59:37.980] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:59:37.980] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:38.230] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:59:38.280] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:59:38.280] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:38.430] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:59:38.480] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:59:38.480] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:38.660] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:59:38.710] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:59:38.710] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:38.760] (Flush Capillary                  :  27) @Stop
[2018-01-12 18:59:39.000] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:59:39.050] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:59:39.050] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 18:59:39.100] (Flush Singulator                 :  28) @Stop
[2018-01-12 18:59:39.200] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 18:59:39.250] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:59:39.250] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:59:39.250] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 18:59:39.250] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 18:59:39.270] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:59:39.270] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 18:59:39.270] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 18:59:39.290] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:59:39.340] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 18:59:39.360] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 18:59:39.610] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:59:39.610] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:59:39.610] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 18:59:39.610] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:59:39.660] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:59:39.660] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 18:59:39.660] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 18:59:39.660] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:59:39.760] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:40.030] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:59:40.080] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:59:40.080] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:40.250] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:59:40.300] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:59:40.300] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:40.590] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:59:40.640] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:59:40.640] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 18:59:40.690] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 18:59:40.790] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 18:59:40.890] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 18:59:40.940] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:59:40.940] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 18:59:40.940] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 18:59:40.970] (Main Well                        :   0) Stop Pump
[2018-01-12 18:59:41.010] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 18:59:41.010] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 18:59:41.010] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 18:59:41.050] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:59:41.100] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 18:59:41.210] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 18:59:41.460] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 18:59:41.460] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:59:41.460] (Flush Capillary                  :  33) @Run
[2018-01-12 18:59:41.460] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 18:59:41.510] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 18:59:41.510] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 18:59:41.510] (Flush Singulator                 :  34) @Run
[2018-01-12 18:59:41.510] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 18:59:41.610] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:41.880] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:59:41.930] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:59:41.930] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:42.240] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:59:42.290] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:59:42.290] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 18:59:42.340] (Flush Singulator                 :  34) @Stop
[2018-01-12 18:59:42.440] (Flush Capillary                  :  33) @Stop
[2018-01-12 18:59:42.540] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 18:59:42.590] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:59:42.590] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 18:59:42.590] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 18:59:42.610] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 18:59:42.630] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 18:59:42.630] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 18:59:42.630] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 18:59:42.650] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:59:42.700] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 18:59:42.830] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 18:59:43.080] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 18:59:43.080] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:59:43.080] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 18:59:43.080] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 18:59:43.130] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 18:59:43.130] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 18:59:43.130] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 18:59:43.130] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 18:59:43.230] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:43.500] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:59:43.550] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 18:59:43.550] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 18:59:43.860] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:59:43.910] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 18:59:43.910] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 18:59:43.960] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 18:59:44.060] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 18:59:44.160] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 18:59:44.210] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 18:59:44.210] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 18:59:44.210] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 18:59:44.230] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 18:59:44.250] (Main Well                        :   0) Stop routine
[2018-01-12 18:59:44.250] (Main Well                        :   0) @Stop
[2018-01-12 18:59:44.390] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 18:59:44.390] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 18:59:44.410] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 18:59:44.410] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 18:59:44.420] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 18:59:44.420] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 18:59:46.390] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 18:59:46.390] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 18:59:46.390] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 18:59:46.390] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 18:59:46.440] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 18:59:46.440] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 18:59:32.350] (Detector                         :  17) @Stop
[2018-01-12 18:59:51.500] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 18:59:51.500] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 18:59:51.500] (MainPre Routine                  :   0) @Run
[2018-01-12 18:59:51.500] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 18:59:57.460] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 18:59:57.460] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 18:59:57.460] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 18:59:58.100] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 18:59:58.100] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 18:59:58.110] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 18:59:59.840] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 18:59:59.840] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 18:59:59.840] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:00:00.000] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:00:00.050] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:00:00.070] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:00:00.320] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:00:00.320] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:00:00.320] (Initialize P1                    :   3) @Run
[2018-01-12 19:00:00.320] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:00:00.370] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:00:00.370] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:00:00.370] (Initialize P2                    :   4) @Run
[2018-01-12 19:00:00.370] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:00:00.550] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:00.780] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:00.900] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:00:00.950] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:00.950] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:01.000] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:00:01.050] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:01.050] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:01.240] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:00:01.290] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:01.290] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:01.340] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:00:01.390] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:01.390] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:01.440] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:00:01.490] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:01.490] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:01.540] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:00:01.590] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:01.590] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:01.640] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:00:01.690] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:01.690] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:01.740] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:00:01.790] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:01.790] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:01.860] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:00:01.910] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:01.910] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:02.100] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:00:02.150] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:02.150] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:02.200] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:00:02.250] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:02.250] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:02.300] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:00:02.350] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:02.350] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:02.400] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:00:02.450] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:02.450] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:02.510] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:00:02.560] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:02.560] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:02.610] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:00:02.660] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:02.660] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:02.730] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:00:02.780] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:02.780] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:02.970] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:00:03.020] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:00:03.020] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:00:03.020] (Initialize P1                    :   3) @Stop
[2018-01-12 19:00:03.070] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:00:03.120] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:00:03.120] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:03.220] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:00:03.270] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:00:03.270] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:00:03.270] (Initialize P2                    :   4) @Stop
[2018-01-12 19:00:03.370] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:00:03.570] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:00:03.590] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:00:03.590] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:00:03.590] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:00:03.590] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:00:03.590] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:03.590] (PreFillP1                        :   6) @Run
[2018-01-12 19:00:03.590] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:00:03.640] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:00:03.640] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:00:03.640] (PreFillP2                        :   7) @Run
[2018-01-12 19:00:03.640] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:00:03.740] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:04.010] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:04.060] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:04.060] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:04.230] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:04.280] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:04.280] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:04.580] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:04.630] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:04.630] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:04.880] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:04.930] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:04.930] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:05.080] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:05.130] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:05.130] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:05.440] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:05.490] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:05.490] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:05.740] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:05.790] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:00:05.790] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:05.840] (PreFillP1                        :   6) @Stop
[2018-01-12 19:00:05.940] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:05.990] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:00:05.990] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:06.160] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:06.210] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:00:06.210] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:06.400] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:06.450] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:00:06.450] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:06.600] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:06.650] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:00:06.650] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:06.750] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:06.800] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:00:06.800] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:06.950] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:07.000] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:00:07.000] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:07.210] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:07.260] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:00:07.260] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:00:07.260] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:00:07.290] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:00:07.310] (PreFillP2                        :   7) @Stop
[2018-01-12 19:00:07.350] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:00:07.350] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:00:07.350] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:00:07.370] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:07.420] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:00:07.440] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:00:07.690] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:00:07.690] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:07.690] (Flush Capillary                  :   9) @Run
[2018-01-12 19:00:07.690] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:00:07.740] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:00:07.740] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:00:07.740] (Flush Singulator                 :  10) @Run
[2018-01-12 19:00:07.740] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:00:07.840] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:08.090] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:08.140] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:08.140] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:08.290] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:08.340] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:08.340] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:08.510] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:08.560] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:08.560] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:08.850] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:08.900] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:08.900] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:09.150] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:09.200] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:09.200] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:09.350] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:09.400] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:09.400] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:09.570] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:09.620] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:09.620] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:09.910] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:09.960] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:00:09.960] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:10.010] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:00:10.110] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:00:10.210] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:10.260] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:00:10.260] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:00:10.260] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:00:10.300] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:00:10.320] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:00:10.320] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:00:10.320] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:00:10.360] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:10.410] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:00:10.520] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:00:10.770] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:00:10.770] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:10.770] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:00:10.770] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:00:10.820] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:00:10.820] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:00:10.820] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:00:10.820] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:00:10.920] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:11.190] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:11.240] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:11.240] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:11.560] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:11.610] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:11.610] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:11.860] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:11.910] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:11.910] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:12.060] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:12.110] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:12.110] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:12.422] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:12.472] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:00:12.472] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:12.522] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:00:12.622] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:00:12.722] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:12.772] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:00:12.772] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:00:12.772] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:00:12.822] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:00:12.822] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:00:12.822] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:00:12.822] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:00:12.822] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:00:12.822] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:00:12.822] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:12.822] (PreFillP1                        :   6) @Run
[2018-01-12 19:00:12.822] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:00:12.872] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:00:12.872] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:00:12.872] (PreFillP2                        :   7) @Run
[2018-01-12 19:00:12.872] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:00:12.972] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:13.302] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:13.352] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:13.352] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:13.502] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:13.552] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:13.552] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:13.722] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:13.772] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:13.772] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:14.062] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:14.112] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:14.112] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:14.362] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:14.412] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:14.412] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:14.562] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:14.612] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:14.612] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:14.782] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:14.832] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:14.832] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:15.122] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:15.172] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:00:15.172] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:15.322] (PreFillP1                        :   6) @Stop
[2018-01-12 19:00:15.422] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:15.472] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:00:15.472] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:15.622] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:15.672] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:00:15.672] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:15.882] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:15.932] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:00:15.932] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:16.082] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:16.132] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:00:16.132] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:16.232] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:16.282] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:00:16.282] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:16.432] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:16.492] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:00:16.492] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:16.692] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:00:16.742] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:00:16.742] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:00:16.742] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:00:16.772] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:00:16.792] (PreFillP2                        :   7) @Stop
[2018-01-12 19:00:16.832] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:00:16.832] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:00:16.832] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:00:16.852] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:16.902] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:00:16.922] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:00:17.172] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:00:17.172] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:17.172] (Flush Capillary                  :   9) @Run
[2018-01-12 19:00:17.172] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:00:17.222] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:00:17.222] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:00:17.222] (Flush Singulator                 :  10) @Run
[2018-01-12 19:00:17.222] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:00:17.322] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:17.572] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:17.622] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:17.622] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:17.772] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:17.822] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:17.822] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:17.992] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:18.042] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:18.042] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:18.332] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:18.382] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:18.382] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:18.632] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:18.682] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:18.682] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:18.832] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:18.882] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:18.882] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:19.052] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:19.102] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:19.102] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:19.392] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:19.442] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:00:19.442] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:19.492] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:00:19.592] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:00:19.692] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:00:19.742] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:00:19.742] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:00:19.742] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:00:19.782] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:00:19.802] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:00:19.802] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:00:19.802] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:00:19.842] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:19.892] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:00:20.002] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:00:20.252] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:00:20.252] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:20.252] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:00:20.252] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:00:20.302] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:00:20.302] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:00:20.302] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:00:20.302] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:00:20.402] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:20.672] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:20.722] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:20.722] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:21.032] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:21.082] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:21.082] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:21.332] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:21.382] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:21.382] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:21.532] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:21.582] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:21.582] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:21.752] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:21.802] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:00:21.802] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:21.852] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:00:22.092] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:22.142] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:00:22.142] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:22.192] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:00:22.292] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:00:22.342] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:00:22.342] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:00:22.342] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:00:22.352] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:00:22.352] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:00:22.352] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:00:22.352] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:00:22.352] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:00:22.352] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:00:22.352] (Prefill before Flush             :  14) @Run
[2018-01-12 19:00:22.352] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:00:22.352] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:00:22.352] (PreFillP1                        :  15) @Run
[2018-01-12 19:00:22.352] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:00:22.402] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:00:22.402] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:00:22.402] (PreFillP2                        :  16) @Run
[2018-01-12 19:00:22.402] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:00:22.502] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:22.792] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:00:22.842] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:22.842] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:23.032] (PreFillP1                        :  15) @Stop
[2018-01-12 19:00:23.132] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:00:23.182] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:00:23.182] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:23.232] (PreFillP2                        :  16) @Stop
[2018-01-12 19:00:23.332] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:00:23.382] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:00:23.382] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:00:23.382] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:00:23.402] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:00:23.422] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:00:23.422] (MainPre Routine                  :   0) @Stop
[2018-01-12 18:59:32.350] (Detector                         :   2) @Stop
[2018-01-12 19:00:23.572] ** STARTING G04 MAIN ROUTINE **
[2018-01-12 19:00:23.572] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:00:23.572] (Main Well                        :   0) @Run
[2018-01-12 19:00:23.572] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:00:23.572] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:00:23.572] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:00:23.572] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:00:23.572] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:00:23.572] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:00:23.572] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:00:23.572] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:00:23.572] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:00:23.572] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:00:24.092] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:00:24.092] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:00:24.122] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:00:24.252] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:00:24.252] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:00:24.252] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:00:24.252] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:00:24.252] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:00:24.252] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:00:24.252] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:00:24.252] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:00:24.252] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:00:24.252] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:00:24.272] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:00:24.322] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:00:24.342] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:00:24.592] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:00:24.592] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:00:24.592] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:00:24.592] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:00:24.642] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:00:24.642] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:00:24.642] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:00:24.642] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:00:24.742] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:25.012] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:00:25.062] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:00:25.062] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:25.372] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:00:25.422] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:00:25.422] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:25.682] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:00:25.732] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:00:25.732] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:25.882] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:00:25.932] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:00:25.932] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:26.002] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:00:26.242] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:00:26.292] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:00:26.292] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:26.342] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:00:26.442] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:00:26.492] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:00:26.492] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:00:26.492] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:00:26.492] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:00:26.492] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:00:26.552] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:00:26.602] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:00:26.662] (Main Well                        :   0) Move to Well 76 with z-offset of 2540 um (Wait)
[2018-01-12 19:00:29.642] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:29.742] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:00:29.792] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:00:29.792] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:29.902] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:00:29.952] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:00:29.952] (Main Well                        :   0) Stop Pump
[2018-01-12 19:00:30.082] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:00:30.142] (Main Well                        :   0) Move to Well 76 with z-offset of 310 um (Wait)
[2018-01-12 19:00:40.682] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:40.922] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:00:40.972] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:00:40.972] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:00:40.972] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:00:40.972] (Pickup Sample                    :  21) @Run
[2018-01-12 19:00:40.972] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:00:45.642] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:00:48.442] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:00:48.522] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:00:48.722] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:48.822] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:48.872] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:48.872] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:48.972] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:49.022] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:49.022] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:49.122] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:49.172] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:49.172] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:49.282] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:49.332] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:49.332] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:49.522] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:49.572] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:49.572] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:49.672] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:49.722] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:49.722] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:49.822] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:49.872] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:49.872] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:49.972] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:50.022] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:50.022] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:50.232] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:50.282] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:50.282] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:50.382] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:50.432] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:50.432] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:50.532] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:50.582] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:50.582] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:50.682] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:50.732] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:50.732] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:50.942] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:50.992] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:50.992] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:51.092] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:51.142] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:51.142] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:51.242] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:51.292] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:51.292] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:51.392] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:51.442] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:51.442] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:51.652] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:51.702] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:51.702] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:51.802] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:51.852] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:51.852] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:51.952] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:52.002] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:52.002] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:52.102] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:52.152] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:52.152] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:52.362] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:52.412] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:52.412] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:52.512] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:52.562] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:52.562] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:52.662] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:52.712] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:52.712] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:52.812] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:52.862] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:52.862] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:53.072] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:53.122] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:53.122] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:53.222] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:53.272] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:53.272] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:53.372] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:53.422] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:53.422] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:53.522] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:53.572] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:53.572] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:53.782] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:53.832] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:53.832] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:53.932] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:53.982] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:53.982] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:54.082] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:54.132] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:54.132] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:54.232] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:54.282] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:54.282] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:54.492] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:54.542] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:54.542] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:54.642] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:54.692] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:54.692] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:54.792] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:54.842] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:54.842] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:54.942] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:54.992] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:54.992] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:55.202] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:55.252] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:55.252] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:55.352] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:55.402] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:55.402] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:55.502] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:55.552] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:55.552] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:55.652] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:55.702] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:55.702] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:55.912] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:55.962] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:55.962] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:56.062] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:56.112] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:56.112] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:56.212] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:56.262] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:56.262] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:56.362] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:56.412] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:56.412] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:56.622] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:56.672] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:56.672] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:56.772] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:56.822] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:56.822] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:56.922] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:56.972] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:56.972] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:57.072] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:57.122] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:57.122] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:57.332] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:57.382] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:57.382] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:57.492] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:57.542] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:57.542] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:57.642] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:57.692] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:57.692] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:57.792] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:57.842] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:00:57.842] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:00:58.052] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:58.102] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:00:58.102] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:00:58.202] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:00:58.252] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:00:58.252] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:00:58.252] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:00:58.572] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:00:58.632] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:00:58.882] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:00:58.902] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:00:58.952] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:00:58.952] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:00:58.952] (Singulate Sample                 :  22) @Run
[2018-01-12 19:00:58.952] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:00:58.952] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:00:58.952] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:00:59.012] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:00:59.062] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:00:59.122] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:00:59.222] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_G04_RAW.qlb"
[2018-01-12 19:00:59.332] (Detector                         :   2) @Run
[2018-01-12 19:00:59.332] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:01:39.232] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:01:40.222] (Detector                         :   2) @Stop
[2018-01-12 19:01:40.232] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:01:40.232] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:01:40.332] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:01:40.382] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:01:40.382] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:40.482] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:01:40.532] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:01:40.532] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:01:40.532] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:01:40.752] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:01:40.752] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:01:40.752] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:01:40.752] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:01:40.752] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:01:40.752] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:01:40.752] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:40.752] (PreFillP1                        :  24) @Run
[2018-01-12 19:01:40.752] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:01:40.802] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:01:40.802] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:01:40.802] (PreFillP2                        :  25) @Run
[2018-01-12 19:01:40.802] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:01:40.902] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:41.212] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:41.262] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:01:41.262] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:41.412] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:41.462] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:01:41.462] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:41.632] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:41.682] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:01:41.682] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:41.972] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:42.022] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:01:42.022] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:42.272] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:42.322] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:01:42.322] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:42.472] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:42.522] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:01:42.522] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:42.692] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:42.742] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:01:42.742] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:43.032] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:43.082] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:01:43.082] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:43.332] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:43.382] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:01:43.382] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:43.542] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:43.592] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:01:43.592] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:43.762] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:43.812] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:01:43.812] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:01:44.102] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:44.152] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:01:44.152] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:01:44.202] (PreFillP1                        :  24) @Stop
[2018-01-12 19:01:44.402] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:44.452] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:01:44.452] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:01:44.552] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:44.602] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:01:44.602] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:01:44.652] (PreFillP2                        :  25) @Stop
[2018-01-12 19:01:44.772] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:01:44.822] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:01:44.822] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:01:44.822] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:01:44.852] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:01:44.852] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:01:44.852] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:01:44.932] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:01:44.982] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:01:45.002] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:01:45.252] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:01:45.252] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:01:45.252] (Flush Capillary                  :  27) @Run
[2018-01-12 19:01:45.252] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:01:45.302] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:01:45.302] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:01:45.302] (Flush Singulator                 :  28) @Run
[2018-01-12 19:01:45.302] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:01:45.402] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:45.672] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:01:45.722] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:01:45.722] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:46.032] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:01:46.082] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:01:46.082] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:46.332] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:01:46.382] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:01:46.382] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:46.532] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:01:46.582] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:01:46.582] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:46.632] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:01:46.752] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:01:46.802] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:01:46.802] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:01:46.852] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:01:47.092] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:01:47.142] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:01:47.142] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:01:47.142] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:01:47.152] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:01:47.172] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:01:47.172] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:01:47.172] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:01:47.192] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:01:47.242] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:01:47.262] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:01:47.512] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:01:47.512] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:01:47.512] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:01:47.512] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:01:47.562] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:01:47.562] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:01:47.562] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:01:47.562] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:01:47.662] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:47.972] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:01:48.022] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:01:48.022] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:48.172] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:01:48.222] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:01:48.222] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:48.392] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:01:48.442] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:01:48.442] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:48.492] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:01:48.732] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:01:48.782] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:01:48.782] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:01:48.832] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:01:48.932] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:01:48.982] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:01:48.982] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:01:48.982] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:01:49.022] (Main Well                        :   0) Stop Pump
[2018-01-12 19:01:49.062] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:01:49.062] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:01:49.062] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:01:49.082] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:01:49.132] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:01:49.152] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:01:49.402] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:01:49.402] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:01:49.402] (Flush Capillary                  :  33) @Run
[2018-01-12 19:01:49.402] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:01:49.452] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:01:49.452] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:01:49.452] (Flush Singulator                 :  34) @Run
[2018-01-12 19:01:49.452] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:01:49.552] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:49.822] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:01:49.872] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:01:49.872] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:50.182] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:01:50.232] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:01:50.232] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:01:50.282] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:01:50.382] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:01:50.492] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:01:50.542] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:01:50.542] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:01:50.542] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:01:50.562] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:01:50.582] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:01:50.582] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:01:50.582] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:01:50.622] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:01:50.672] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:01:50.782] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:01:51.032] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:01:51.032] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:01:51.032] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:01:51.032] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:01:51.082] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:01:51.082] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:01:51.082] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:01:51.082] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:01:51.182] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:51.452] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:01:51.502] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:01:51.502] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:01:51.812] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:01:51.862] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:01:51.862] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:01:51.912] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:01:52.012] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:01:52.112] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:01:52.162] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:01:52.162] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:01:52.162] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:01:52.182] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:01:52.202] (Main Well                        :   0) Stop routine
[2018-01-12 19:01:52.202] (Main Well                        :   0) @Stop
[2018-01-12 19:01:52.372] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:01:52.372] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:01:52.372] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:01:52.372] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:01:52.392] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:01:52.392] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:01:54.372] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:01:54.372] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:01:54.372] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:01:54.372] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:01:54.412] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:01:54.412] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:01:40.222] (Detector                         :  17) @Stop
[2018-01-12 19:02:01.162] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:02:01.162] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:02:01.162] (MainPre Routine                  :   0) @Run
[2018-01-12 19:02:01.162] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:02:07.262] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:02:07.262] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:02:07.262] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:02:07.902] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:02:07.902] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:02:07.912] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:02:09.642] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:02:09.642] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:02:09.642] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:02:09.802] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:02:09.852] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:02:09.872] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:02:10.122] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:02:10.122] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:02:10.122] (Initialize P1                    :   3) @Run
[2018-01-12 19:02:10.122] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:02:10.172] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:02:10.172] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:02:10.172] (Initialize P2                    :   4) @Run
[2018-01-12 19:02:10.172] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:02:10.352] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:10.582] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:10.702] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:02:10.752] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:10.752] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:10.802] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:02:10.852] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:10.852] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:11.042] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:02:11.092] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:11.092] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:11.142] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:02:11.192] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:11.192] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:11.242] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:02:11.292] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:11.292] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:11.342] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:02:11.392] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:11.392] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:11.442] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:02:11.492] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:11.492] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:11.542] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:02:11.592] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:11.592] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:11.662] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:02:11.712] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:11.712] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:11.902] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:02:11.952] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:11.952] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:12.002] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:02:12.052] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:12.052] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:12.102] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:02:12.152] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:12.152] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:12.202] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:02:12.252] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:12.252] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:12.302] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:02:12.352] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:12.352] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:12.402] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:02:12.452] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:12.452] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:12.522] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:02:12.572] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:12.572] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:12.762] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:02:12.812] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:12.812] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:12.862] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:02:12.914] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:02:12.914] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:12.964] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:02:13.014] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:02:13.014] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:02:13.014] (Initialize P1                    :   3) @Stop
[2018-01-12 19:02:13.064] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:02:13.114] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:02:13.114] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:02:13.114] (Initialize P2                    :   4) @Stop
[2018-01-12 19:02:13.374] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:02:13.574] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:02:13.594] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:02:13.594] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:02:13.594] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:02:13.594] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:02:13.594] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:13.594] (PreFillP1                        :   6) @Run
[2018-01-12 19:02:13.594] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:02:13.644] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:02:13.644] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:02:13.644] (PreFillP2                        :   7) @Run
[2018-01-12 19:02:13.644] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:02:13.744] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:14.014] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:14.064] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:14.064] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:14.374] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:14.424] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:14.424] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:14.674] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:14.724] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:14.724] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:14.874] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:14.924] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:14.924] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:15.234] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:15.284] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:15.284] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:15.534] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:15.584] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:15.584] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:15.734] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:15.784] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:02:15.784] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:15.834] (PreFillP1                        :   6) @Stop
[2018-01-12 19:02:15.954] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:16.004] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:02:16.004] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:16.294] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:16.344] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:02:16.344] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:16.494] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:16.544] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:02:16.544] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:16.644] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:16.694] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:02:16.694] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:16.864] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:16.914] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:02:16.914] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:17.104] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:17.154] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:02:17.154] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:17.204] (PreFillP2                        :   7) @Stop
[2018-01-12 19:02:17.304] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:17.354] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:02:17.354] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:02:17.354] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:02:17.394] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:02:17.434] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:02:17.434] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:02:17.434] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:02:17.454] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:17.504] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:02:17.524] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:02:17.774] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:02:17.774] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:17.774] (Flush Capillary                  :   9) @Run
[2018-01-12 19:02:17.774] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:02:17.824] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:02:17.824] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:02:17.824] (Flush Singulator                 :  10) @Run
[2018-01-12 19:02:17.824] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:02:17.924] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:18.194] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:18.244] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:18.244] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:18.554] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:18.604] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:18.604] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:18.854] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:18.904] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:18.904] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:19.054] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:19.104] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:19.104] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:19.414] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:19.464] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:19.464] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:19.724] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:19.774] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:19.774] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:19.824] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:02:19.924] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:19.974] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:02:19.974] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:20.044] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:02:20.284] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:20.334] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:02:20.334] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:02:20.334] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:02:20.384] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:02:20.404] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:02:20.404] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:02:20.404] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:02:20.424] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:20.474] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:02:20.494] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:02:20.744] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:02:20.744] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:20.744] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:02:20.744] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:02:20.794] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:02:20.794] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:02:20.794] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:02:20.794] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:02:20.894] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:21.064] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:21.114] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:21.114] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:21.364] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:21.414] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:21.414] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:21.724] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:21.774] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:21.774] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:22.024] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:22.074] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:22.074] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:22.224] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:22.274] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:22.274] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:22.444] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:22.494] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:02:22.494] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:22.544] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:02:22.784] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:22.834] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:02:22.834] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:02:22.834] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:02:22.854] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:02:22.854] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:02:22.854] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:02:22.854] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:02:22.854] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:02:22.854] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:02:22.854] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:22.854] (PreFillP1                        :   6) @Run
[2018-01-12 19:02:22.854] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:02:22.884] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:02:22.904] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:02:22.904] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:02:22.904] (PreFillP2                        :   7) @Run
[2018-01-12 19:02:22.904] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:02:23.004] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:23.204] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:23.254] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:23.254] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:23.424] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:23.474] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:23.474] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:23.764] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:23.814] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:23.814] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:24.064] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:24.114] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:24.114] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:24.264] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:24.314] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:24.314] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:24.484] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:24.534] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:24.534] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:24.824] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:24.874] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:24.874] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:25.124] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:25.174] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:02:25.174] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:25.224] (PreFillP1                        :   6) @Stop
[2018-01-12 19:02:25.324] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:25.374] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:02:25.374] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:25.544] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:25.594] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:02:25.594] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:25.784] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:25.834] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:02:25.834] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:25.984] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:26.034] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:02:26.034] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:26.134] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:26.184] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:02:26.184] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:26.334] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:26.384] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:02:26.384] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:26.594] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:02:26.644] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:02:26.644] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:02:26.644] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:02:26.654] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:02:26.694] (PreFillP2                        :   7) @Stop
[2018-01-12 19:02:26.734] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:02:26.734] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:02:26.734] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:02:26.754] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:26.804] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:02:26.824] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:02:27.074] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:02:27.074] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:27.074] (Flush Capillary                  :   9) @Run
[2018-01-12 19:02:27.074] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:02:27.124] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:02:27.124] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:02:27.124] (Flush Singulator                 :  10) @Run
[2018-01-12 19:02:27.124] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:02:27.224] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:27.474] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:27.524] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:27.524] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:27.674] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:27.724] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:27.724] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:27.894] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:27.944] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:27.944] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:28.234] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:28.284] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:28.284] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:28.534] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:28.584] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:28.584] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:28.734] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:28.784] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:28.784] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:28.954] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:29.004] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:29.004] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:29.294] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:29.344] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:02:29.344] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:29.394] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:02:29.494] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:02:29.594] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:02:29.644] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:02:29.644] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:02:29.644] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:02:29.684] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:02:29.704] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:02:29.704] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:02:29.704] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:02:29.744] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:29.794] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:02:29.904] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:02:30.154] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:02:30.154] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:30.154] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:02:30.154] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:02:30.204] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:02:30.204] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:02:30.204] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:02:30.204] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:02:30.304] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:30.574] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:30.624] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:30.624] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:30.934] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:30.984] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:30.984] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:31.234] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:31.284] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:31.284] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:31.434] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:31.484] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:31.484] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:31.654] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:31.704] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:02:31.704] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:31.754] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:02:31.994] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:32.044] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:02:32.044] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:32.094] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:02:32.194] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:02:32.244] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:02:32.244] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:02:32.244] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:02:32.254] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:02:32.254] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:02:32.254] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:02:32.254] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:02:32.254] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:02:32.254] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:02:32.254] (Prefill before Flush             :  14) @Run
[2018-01-12 19:02:32.254] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:02:32.254] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:02:32.254] (PreFillP1                        :  15) @Run
[2018-01-12 19:02:32.254] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:02:32.304] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:02:32.304] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:02:32.304] (PreFillP2                        :  16) @Run
[2018-01-12 19:02:32.304] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:02:32.404] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:32.694] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:02:32.744] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:32.744] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:32.934] (PreFillP1                        :  15) @Stop
[2018-01-12 19:02:33.034] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:02:33.084] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:02:33.084] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:33.134] (PreFillP2                        :  16) @Stop
[2018-01-12 19:02:33.234] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:02:33.284] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:02:33.284] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:02:33.284] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:02:33.304] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:02:33.324] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:02:33.324] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:01:40.222] (Detector                         :   2) @Stop
[2018-01-12 19:02:33.734] ** STARTING H04 MAIN ROUTINE **
[2018-01-12 19:02:33.734] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:02:33.734] (Main Well                        :   0) @Run
[2018-01-12 19:02:33.734] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:02:33.754] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:02:33.754] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:02:33.754] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:02:33.754] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:02:33.754] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:02:33.754] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:02:33.754] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:02:33.754] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:02:33.754] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:02:34.254] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:02:34.254] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:02:34.304] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:02:34.414] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:02:34.414] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:02:34.414] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:02:34.414] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:02:34.414] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:02:34.414] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:02:34.414] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:02:34.414] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:02:34.414] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:02:34.414] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:02:34.434] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:02:34.484] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:02:34.504] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:02:34.754] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:02:34.754] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:02:34.754] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:02:34.754] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:02:34.804] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:02:34.804] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:02:34.804] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:02:34.804] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:02:34.904] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:35.184] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:02:35.234] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:02:35.234] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:35.544] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:02:35.594] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:02:35.594] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:35.844] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:02:35.894] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:02:35.894] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:36.044] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:02:36.094] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:02:36.094] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:36.144] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:02:36.264] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:02:36.314] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:02:36.314] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:36.364] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:02:36.604] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:02:36.654] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:02:36.654] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:02:36.654] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:02:36.654] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:02:36.654] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:02:36.714] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:02:36.764] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:02:36.824] (Main Well                        :   0) Move to Well 88 with z-offset of 2540 um (Wait)
[2018-01-12 19:02:39.784] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:02:40.024] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:02:40.074] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:02:40.074] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:40.174] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:02:40.224] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:02:40.224] (Main Well                        :   0) Stop Pump
[2018-01-12 19:02:40.264] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:02:40.324] (Main Well                        :   0) Move to Well 88 with z-offset of 310 um (Wait)
[2018-01-12 19:02:51.024] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:51.264] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:02:51.314] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:02:51.314] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:02:51.314] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:02:51.314] (Pickup Sample                    :  21) @Run
[2018-01-12 19:02:51.314] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:02:55.984] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:02:58.784] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:02:58.864] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:02:59.064] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:59.164] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:02:59.214] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:59.214] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:59.314] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:02:59.364] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:59.364] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:59.464] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:02:59.514] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:59.514] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:59.624] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:02:59.674] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:59.674] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:02:59.864] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:02:59.914] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:02:59.914] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:00.014] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:00.064] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:00.064] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:00.164] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:00.214] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:00.214] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:00.314] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:00.364] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:00.364] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:00.574] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:00.624] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:00.624] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:00.724] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:00.774] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:00.774] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:00.874] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:00.924] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:00.924] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:01.024] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:01.074] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:01.074] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:01.284] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:01.334] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:01.334] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:01.434] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:01.484] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:01.484] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:01.584] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:01.634] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:01.634] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:01.734] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:01.784] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:01.784] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:01.994] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:02.044] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:02.044] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:02.144] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:02.194] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:02.194] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:02.294] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:02.344] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:02.344] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:02.444] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:02.494] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:02.494] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:02.704] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:02.754] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:02.754] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:02.854] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:02.904] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:02.904] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:03.004] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:03.054] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:03.054] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:03.154] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:03.204] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:03.204] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:03.414] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:03.464] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:03.464] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:03.564] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:03.614] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:03.614] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:03.714] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:03.764] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:03.764] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:03.864] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:03.914] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:03.914] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:04.124] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:04.174] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:04.174] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:04.274] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:04.324] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:04.324] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:04.424] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:04.474] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:04.474] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:04.574] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:04.624] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:04.624] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:04.834] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:04.884] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:04.884] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:04.984] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:05.034] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:05.034] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:05.134] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:05.184] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:05.184] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:05.284] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:05.334] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:05.334] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:05.544] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:05.594] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:05.594] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:05.694] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:05.744] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:05.744] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:05.844] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:05.894] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:05.894] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:05.994] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:06.044] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:06.044] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:06.254] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:06.304] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:06.304] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:06.404] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:06.454] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:06.454] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:06.554] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:06.604] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:06.604] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:06.704] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:06.754] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:06.754] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:06.964] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:07.014] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:07.014] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:07.114] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:07.164] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:07.164] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:07.264] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:07.314] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:07.314] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:07.414] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:07.464] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:07.464] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:07.674] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:07.724] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:07.724] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:07.824] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:07.874] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:07.874] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:07.974] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:08.024] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:08.024] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:08.124] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:08.174] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:08.174] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:08.384] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:08.434] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:03:08.434] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:08.534] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:03:08.584] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:03:08.584] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:03:08.584] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:03:08.914] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:03:08.964] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:03:09.214] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:03:09.234] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:03:09.284] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:03:09.284] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:03:09.284] (Singulate Sample                 :  22) @Run
[2018-01-12 19:03:09.284] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:03:09.284] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:03:09.284] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:03:09.344] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:03:09.394] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:03:09.454] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:03:09.554] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_H04_RAW.qlb"
[2018-01-12 19:03:09.654] (Detector                         :   2) @Run
[2018-01-12 19:03:09.654] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:03:49.554] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:03:50.614] (Detector                         :   2) @Stop
[2018-01-12 19:03:50.754] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:03:50.754] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:50.854] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:03:50.904] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:03:50.904] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:51.004] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:03:51.054] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:03:51.054] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:03:51.054] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:03:51.284] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:03:51.284] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:03:51.284] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:03:51.284] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:03:51.284] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:03:51.284] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:03:51.284] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:51.284] (PreFillP1                        :  24) @Run
[2018-01-12 19:03:51.284] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:03:51.334] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:03:51.334] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:03:51.334] (PreFillP2                        :  25) @Run
[2018-01-12 19:03:51.334] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:03:51.434] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:51.714] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:51.764] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:51.764] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:51.934] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:51.984] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:51.984] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:52.274] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:52.324] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:52.324] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:52.574] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:52.624] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:52.624] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:52.774] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:52.824] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:52.824] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:52.994] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:53.044] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:53.044] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:53.334] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:53.384] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:53.384] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:53.634] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:53.684] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:53.684] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:53.834] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:53.884] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:53.884] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:54.054] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:54.104] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:03:54.104] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:54.394] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:54.444] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:03:54.444] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:54.494] (PreFillP1                        :  24) @Stop
[2018-01-12 19:03:54.694] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:54.744] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:03:54.744] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:54.844] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:54.894] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:03:54.894] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:55.064] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:03:55.114] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:03:55.114] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:03:55.114] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:03:55.134] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:03:55.134] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:03:55.134] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:03:55.224] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:03:55.274] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:03:55.324] (PreFillP2                        :  25) @Stop
[2018-01-12 19:03:55.344] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:03:55.594] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:03:55.594] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:03:55.594] (Flush Capillary                  :  27) @Run
[2018-01-12 19:03:55.594] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:03:55.644] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:03:55.644] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:03:55.644] (Flush Singulator                 :  28) @Run
[2018-01-12 19:03:55.644] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:03:55.744] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:56.034] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:03:56.084] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:03:56.084] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:56.374] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:03:56.424] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:03:56.424] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:56.574] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:03:56.624] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:03:56.624] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:56.774] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:03:56.824] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:03:56.824] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:56.994] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:03:57.044] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:03:57.044] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:57.094] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:03:57.334] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:03:57.384] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:03:57.384] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:03:57.384] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:03:57.434] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:03:57.434] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:03:57.454] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:03:57.454] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:03:57.454] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:03:57.474] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:03:57.524] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:03:57.544] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:03:57.794] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:03:57.794] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:03:57.794] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:03:57.794] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:03:57.844] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:03:57.844] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:03:57.844] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:03:57.844] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:03:57.944] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:58.114] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:03:58.164] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:03:58.164] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:58.414] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:03:58.464] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:03:58.464] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:03:58.774] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:03:58.824] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:03:58.824] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:03:58.874] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:03:58.974] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:03:59.074] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:03:59.124] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:03:59.124] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:03:59.124] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:03:59.154] (Main Well                        :   0) Stop Pump
[2018-01-12 19:03:59.194] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:03:59.194] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:03:59.194] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:03:59.234] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:03:59.284] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:03:59.394] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:03:59.644] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:03:59.644] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:03:59.644] (Flush Capillary                  :  33) @Run
[2018-01-12 19:03:59.644] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:03:59.694] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:03:59.694] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:03:59.694] (Flush Singulator                 :  34) @Run
[2018-01-12 19:03:59.694] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:03:59.794] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:00.064] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:04:00.114] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:00.114] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:00.424] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:04:00.474] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:04:00.474] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:00.524] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:04:00.624] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:04:00.724] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:04:00.774] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:04:00.774] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:04:00.774] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:04:00.794] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:04:00.814] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:04:00.814] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:04:00.814] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:04:00.834] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:04:00.884] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:04:01.014] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:04:01.264] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:04:01.264] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:04:01.264] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:04:01.264] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:04:01.314] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:04:01.314] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:04:01.314] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:04:01.314] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:04:01.414] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:01.684] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:04:01.734] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:01.734] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:02.044] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:04:02.094] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:04:02.094] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:02.144] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:04:02.244] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:04:02.344] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:04:02.394] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:04:02.394] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:04:02.394] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:04:02.414] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:04:02.434] (Main Well                        :   0) Stop routine
[2018-01-12 19:04:02.434] (Main Well                        :   0) @Stop
[2018-01-12 19:04:02.814] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:04:02.814] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:04:02.824] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:04:02.824] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:04:02.824] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:04:02.824] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:04:04.814] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:04:04.814] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:04:04.814] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:04:04.814] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:04:04.854] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:04:04.854] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:03:50.614] (Detector                         :  17) @Stop
[2018-01-12 19:04:10.724] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:04:10.724] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:04:10.724] (MainPre Routine                  :   0) @Run
[2018-01-12 19:04:10.724] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:04:16.646] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:04:16.646] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:04:16.646] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:04:17.286] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:04:17.286] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:04:17.296] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:04:19.026] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:04:19.026] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:04:19.026] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:04:19.186] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:04:19.236] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:04:19.256] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:04:19.506] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:04:19.506] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:04:19.506] (Initialize P1                    :   3) @Run
[2018-01-12 19:04:19.506] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:04:19.556] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:04:19.556] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:04:19.556] (Initialize P2                    :   4) @Run
[2018-01-12 19:04:19.556] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:04:19.736] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:19.966] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:20.086] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:04:20.136] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:20.136] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:20.186] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:04:20.236] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:20.236] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:20.426] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:04:20.476] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:20.476] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:20.526] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:04:20.576] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:20.576] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:20.626] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:04:20.676] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:20.676] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:20.726] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:04:20.776] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:20.776] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:20.826] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:04:20.876] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:20.876] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:20.926] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:04:20.976] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:20.976] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:21.046] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:04:21.096] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:21.096] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:21.286] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:04:21.336] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:21.336] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:21.386] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:04:21.436] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:21.436] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:21.486] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:04:21.536] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:21.536] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:21.586] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:04:21.636] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:21.636] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:21.686] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:04:21.736] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:21.736] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:21.786] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:04:21.836] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:21.836] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:21.906] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:04:21.956] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:21.956] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:22.146] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:04:22.196] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:22.196] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:22.246] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:04:22.296] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:04:22.296] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:22.346] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:04:22.396] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:04:22.396] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:04:22.396] (Initialize P1                    :   3) @Stop
[2018-01-12 19:04:22.446] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:04:22.496] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:04:22.496] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:04:22.496] (Initialize P2                    :   4) @Stop
[2018-01-12 19:04:22.756] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:04:22.956] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:04:22.986] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:04:22.986] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:04:22.986] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:04:22.986] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:04:22.986] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:22.986] (PreFillP1                        :   6) @Run
[2018-01-12 19:04:22.986] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:04:23.036] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:04:23.036] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:04:23.036] (PreFillP2                        :   7) @Run
[2018-01-12 19:04:23.036] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:04:23.136] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:23.406] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:23.456] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:23.456] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:23.766] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:23.816] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:23.816] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:24.066] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:24.116] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:24.116] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:24.266] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:24.316] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:24.316] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:24.486] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:24.536] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:24.536] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:24.826] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:24.876] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:24.876] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:25.126] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:25.176] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:04:25.176] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:25.226] (PreFillP1                        :   6) @Stop
[2018-01-12 19:04:25.326] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:25.376] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:04:25.376] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:25.546] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:25.596] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:04:25.596] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:25.786] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:25.836] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:04:25.836] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:25.986] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:26.036] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:04:26.036] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:26.136] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:26.186] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:04:26.186] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:26.336] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:26.386] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:04:26.386] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:26.596] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:26.646] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:04:26.646] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:04:26.646] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:04:26.686] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:04:26.696] (PreFillP2                        :   7) @Stop
[2018-01-12 19:04:26.736] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:04:26.736] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:04:26.736] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:04:26.756] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:26.806] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:04:26.826] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:04:27.076] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:04:27.076] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:27.076] (Flush Capillary                  :   9) @Run
[2018-01-12 19:04:27.076] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:04:27.126] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:04:27.126] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:04:27.126] (Flush Singulator                 :  10) @Run
[2018-01-12 19:04:27.126] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:04:27.226] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:27.476] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:27.526] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:27.526] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:27.676] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:27.726] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:27.726] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:27.896] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:27.946] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:27.946] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:28.236] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:28.286] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:28.286] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:28.536] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:28.586] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:28.586] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:28.736] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:28.786] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:28.786] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:28.956] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:29.006] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:29.006] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:29.296] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:29.346] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:04:29.346] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:29.396] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:04:29.496] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:04:29.606] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:29.656] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:04:29.656] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:04:29.656] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:04:29.686] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:04:29.706] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:04:29.706] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:04:29.706] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:04:29.746] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:29.796] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:04:29.906] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:04:30.156] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:04:30.156] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:30.156] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:04:30.156] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:04:30.206] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:04:30.206] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:04:30.206] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:04:30.206] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:04:30.306] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:30.576] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:30.626] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:30.626] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:30.936] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:30.986] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:30.986] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:31.236] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:31.286] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:31.286] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:31.436] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:31.486] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:31.486] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:31.656] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:31.706] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:31.706] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:31.756] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:04:31.997] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:32.047] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:04:32.047] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:32.097] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:04:32.197] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:32.247] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:04:32.247] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:04:32.247] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:04:32.257] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:04:32.257] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:04:32.257] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:04:32.257] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:04:32.257] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:04:32.257] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:04:32.257] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:32.257] (PreFillP1                        :   6) @Run
[2018-01-12 19:04:32.257] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:04:32.307] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:04:32.307] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:04:32.307] (PreFillP2                        :   7) @Run
[2018-01-12 19:04:32.307] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:04:32.407] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:32.697] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:32.747] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:32.747] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:33.037] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:33.087] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:33.087] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:33.237] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:33.287] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:33.287] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:33.437] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:33.487] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:33.487] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:33.657] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:33.707] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:33.707] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:33.997] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:34.047] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:34.047] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:34.297] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:34.347] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:34.347] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:34.497] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:34.547] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:04:34.547] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:34.607] (PreFillP1                        :   6) @Stop
[2018-01-12 19:04:34.727] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:34.777] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:04:34.777] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:35.067] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:35.117] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:04:35.117] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:35.267] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:35.317] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:04:35.317] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:35.417] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:35.467] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:04:35.467] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:35.617] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:35.667] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:04:35.667] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:35.877] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:04:35.927] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:04:35.927] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:04:35.927] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:04:35.957] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:04:35.977] (PreFillP2                        :   7) @Stop
[2018-01-12 19:04:36.017] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:04:36.017] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:04:36.017] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:04:36.037] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:36.087] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:04:36.107] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:04:36.357] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:04:36.357] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:36.357] (Flush Capillary                  :   9) @Run
[2018-01-12 19:04:36.357] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:04:36.407] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:04:36.407] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:04:36.407] (Flush Singulator                 :  10) @Run
[2018-01-12 19:04:36.407] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:04:36.507] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:36.757] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:36.807] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:36.807] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:36.957] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:37.007] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:37.007] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:37.177] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:37.227] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:37.227] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:37.517] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:37.567] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:37.567] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:37.817] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:37.867] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:37.867] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:38.017] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:38.067] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:38.067] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:38.237] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:38.287] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:38.287] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:38.577] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:38.627] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:04:38.627] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:38.677] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:04:38.777] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:04:38.877] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:04:38.927] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:04:38.927] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:04:38.927] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:04:38.967] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:04:38.987] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:04:38.987] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:04:38.987] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:04:39.027] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:39.077] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:04:39.187] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:04:39.437] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:04:39.437] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:39.437] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:04:39.437] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:04:39.487] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:04:39.487] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:04:39.487] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:04:39.487] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:04:39.587] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:39.857] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:39.907] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:39.907] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:40.217] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:40.267] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:40.267] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:40.517] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:40.567] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:40.567] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:40.717] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:40.767] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:40.767] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:40.937] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:40.987] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:04:40.987] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:41.037] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:04:41.277] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:41.327] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:04:41.327] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:41.377] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:04:41.477] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:04:41.527] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:04:41.527] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:04:41.527] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:04:41.537] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:04:41.537] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:04:41.537] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:04:41.537] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:04:41.537] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:04:41.537] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:04:41.537] (Prefill before Flush             :  14) @Run
[2018-01-12 19:04:41.537] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:04:41.537] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:04:41.537] (PreFillP1                        :  15) @Run
[2018-01-12 19:04:41.537] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:04:41.587] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:04:41.587] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:04:41.587] (PreFillP2                        :  16) @Run
[2018-01-12 19:04:41.587] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:04:41.687] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:41.977] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:04:42.027] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:04:42.027] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:42.217] (PreFillP1                        :  15) @Stop
[2018-01-12 19:04:42.317] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:04:42.367] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:04:42.367] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:42.417] (PreFillP2                        :  16) @Stop
[2018-01-12 19:04:42.517] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:04:42.567] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:04:42.567] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:04:42.567] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:04:42.587] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:04:42.607] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:04:42.607] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:03:50.614] (Detector                         :   2) @Stop
[2018-01-12 19:04:42.807] ** STARTING A05 MAIN ROUTINE **
[2018-01-12 19:04:42.807] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:04:42.807] (Main Well                        :   0) @Run
[2018-01-12 19:04:42.807] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:04:42.807] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:04:42.807] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:04:42.807] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:04:42.807] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:04:42.807] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:04:42.807] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:04:42.807] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:04:42.807] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:04:42.807] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:04:43.307] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:04:43.307] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:04:43.357] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:04:43.467] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:04:43.467] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:04:43.467] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:04:43.467] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:04:43.467] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:04:43.467] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:04:43.467] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:04:43.467] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:04:43.467] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:04:43.467] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:04:43.487] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:04:43.537] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:04:43.557] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:04:43.807] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:04:43.807] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:04:43.807] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:04:43.807] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:04:43.857] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:04:43.857] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:04:43.857] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:04:43.857] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:04:43.957] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:44.227] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:04:44.277] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:04:44.277] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:44.587] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:04:44.637] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:04:44.637] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:44.887] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:04:44.937] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:04:44.937] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:45.087] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:04:45.137] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:04:45.137] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:45.187] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:04:45.307] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:04:45.357] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:04:45.357] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:45.407] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:04:45.657] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:04:45.707] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:04:45.707] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:04:45.707] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:04:45.707] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:04:45.707] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:04:45.767] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:04:45.817] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:04:45.877] (Main Well                        :   0) Move to Well 5 with z-offset of 2540 um (Wait)
[2018-01-12 19:04:48.297] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:04:48.537] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:04:48.587] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:04:48.587] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:48.687] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:04:48.737] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:04:48.737] (Main Well                        :   0) Stop Pump
[2018-01-12 19:04:48.777] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:04:48.837] (Main Well                        :   0) Move to Well 5 with z-offset of 310 um (Wait)
[2018-01-12 19:04:58.357] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:04:58.597] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:04:58.647] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:04:58.647] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:04:58.647] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:04:58.647] (Pickup Sample                    :  21) @Run
[2018-01-12 19:04:58.647] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:05:03.317] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:05:05.397] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:05:05.477] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:05:05.677] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:05.777] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:05.827] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:05.827] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:05.927] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:05.977] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:05.977] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:06.077] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:06.127] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:06.127] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:06.237] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:06.287] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:06.287] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:06.477] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:06.527] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:06.527] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:06.627] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:06.677] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:06.677] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:06.777] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:06.827] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:06.827] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:06.927] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:06.977] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:06.977] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:07.187] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:07.237] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:07.237] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:07.337] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:07.387] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:07.387] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:07.487] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:07.537] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:07.537] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:07.637] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:07.687] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:07.687] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:07.897] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:07.947] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:07.947] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:08.047] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:08.097] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:08.097] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:08.197] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:08.247] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:08.247] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:08.347] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:08.397] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:08.397] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:08.607] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:08.657] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:08.657] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:08.757] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:08.807] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:08.807] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:08.907] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:08.957] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:08.957] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:09.057] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:09.107] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:09.107] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:09.317] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:09.367] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:09.367] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:09.467] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:09.517] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:09.517] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:09.617] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:09.667] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:09.667] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:09.767] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:09.817] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:09.817] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:10.027] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:10.077] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:10.077] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:10.177] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:10.227] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:10.227] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:10.327] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:10.377] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:10.377] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:10.477] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:10.527] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:10.527] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:10.737] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:10.787] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:10.787] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:10.887] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:10.937] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:10.937] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:11.037] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:11.087] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:11.087] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:11.187] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:11.237] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:11.237] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:11.447] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:11.497] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:11.497] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:11.597] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:11.647] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:11.647] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:11.747] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:11.797] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:11.797] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:11.897] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:11.947] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:11.947] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:12.157] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:12.207] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:12.207] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:12.307] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:12.357] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:12.357] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:12.457] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:12.507] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:12.507] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:12.607] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:12.657] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:12.657] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:12.867] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:12.917] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:12.917] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:13.017] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:13.067] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:13.067] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:13.167] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:13.217] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:13.217] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:13.317] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:13.367] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:13.367] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:13.577] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:13.629] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:13.629] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:13.729] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:13.779] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:13.779] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:13.879] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:13.929] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:13.929] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:14.029] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:14.079] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:14.079] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:14.289] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:14.339] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:14.339] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:14.439] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:14.489] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:14.489] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:14.589] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:14.639] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:14.639] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:14.739] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:14.789] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:14.789] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:14.999] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:15.049] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:05:15.049] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:05:15.149] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:05:15.199] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:05:15.199] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:05:15.199] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:05:15.449] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:05:15.579] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:05:15.829] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:05:15.849] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:05:15.899] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:05:15.899] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:05:15.899] (Singulate Sample                 :  22) @Run
[2018-01-12 19:05:15.899] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:05:15.899] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:05:15.899] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:05:15.959] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:05:16.009] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:05:16.069] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:05:16.169] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_A05_RAW.qlb"
[2018-01-12 19:05:16.279] (Detector                         :   2) @Run
[2018-01-12 19:05:16.279] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:05:56.179] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:05:57.319] (Detector                         :   2) @Stop
[2018-01-12 19:05:57.379] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:05:57.379] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:05:57.479] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:05:57.529] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:05:57.529] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:05:57.629] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:05:57.679] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:05:57.679] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:05:57.679] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:05:57.899] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:05:57.899] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:05:57.899] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:05:57.899] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:05:57.899] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:05:57.899] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:05:57.899] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:05:57.899] (PreFillP1                        :  24) @Run
[2018-01-12 19:05:57.899] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:05:57.949] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:05:57.949] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:05:57.949] (PreFillP2                        :  25) @Run
[2018-01-12 19:05:57.949] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:05:58.049] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:05:58.319] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:05:58.369] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:58.369] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:05:58.539] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:05:58.589] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:58.589] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:05:58.879] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:05:58.929] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:58.929] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:05:59.179] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:05:59.229] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:59.229] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:05:59.379] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:05:59.429] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:59.429] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:05:59.599] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:05:59.649] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:59.649] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:05:59.939] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:05:59.989] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:05:59.989] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:00.239] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:06:00.289] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:00.289] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:00.439] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:06:00.489] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:00.489] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:00.659] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:06:00.709] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:00.709] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:00.999] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:06:01.049] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:06:01.049] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:01.099] (PreFillP1                        :  24) @Stop
[2018-01-12 19:06:01.299] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:06:01.349] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:06:01.349] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:01.449] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:06:01.499] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:06:01.499] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:01.669] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:06:01.719] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:06:01.719] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:06:01.719] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:06:01.749] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:06:01.749] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:06:01.749] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:06:01.909] (PreFillP2                        :  25) @Stop
[2018-01-12 19:06:01.929] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:06:01.979] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:06:01.999] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:06:02.249] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:06:02.249] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:06:02.249] (Flush Capillary                  :  27) @Run
[2018-01-12 19:06:02.249] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:06:02.299] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:06:02.299] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:06:02.299] (Flush Singulator                 :  28) @Run
[2018-01-12 19:06:02.299] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:06:02.399] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:02.829] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:06:02.879] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:02.879] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:03.129] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:06:03.179] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:03.179] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:03.329] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:06:03.379] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:03.379] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:03.549] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:06:03.599] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:03.599] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:03.649] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:06:03.889] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:06:03.939] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:06:03.939] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:03.989] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:06:04.089] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:06:04.139] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:06:04.139] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:06:04.139] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:06:04.149] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:06:04.169] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:06:04.169] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:06:04.169] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:06:04.189] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:06:04.239] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:06:04.259] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:06:04.509] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:06:04.509] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:06:04.509] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:06:04.509] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:06:04.559] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:06:04.559] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:06:04.559] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:06:04.559] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:06:04.659] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:04.929] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:06:04.979] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:04.979] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:05.149] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:06:05.199] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:05.199] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:05.489] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:06:05.539] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:06:05.539] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:05.589] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:06:05.689] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:06:05.789] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:06:05.839] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:06:05.839] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:06:05.839] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:06:05.869] (Main Well                        :   0) Stop Pump
[2018-01-12 19:06:05.909] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:06:05.909] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:06:05.909] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:06:05.949] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:06:05.999] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:06:06.109] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:06:06.359] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:06:06.359] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:06:06.359] (Flush Capillary                  :  33) @Run
[2018-01-12 19:06:06.359] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:06:06.409] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:06:06.409] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:06:06.409] (Flush Singulator                 :  34) @Run
[2018-01-12 19:06:06.409] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:06:06.509] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:06.779] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:06:06.829] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:06.829] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:07.139] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:06:07.189] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:06:07.189] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:07.239] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:06:07.339] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:06:07.439] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:06:07.489] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:06:07.489] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:06:07.489] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:06:07.509] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:06:07.529] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:06:07.529] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:06:07.529] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:06:07.549] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:06:07.599] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:06:07.729] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:06:07.979] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:06:07.979] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:06:07.979] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:06:07.979] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:06:08.029] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:06:08.029] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:06:08.029] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:06:08.029] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:06:08.129] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:08.399] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:06:08.449] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:08.449] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:08.759] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:06:08.809] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:06:08.809] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:08.859] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:06:08.959] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:06:09.059] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:06:09.109] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:06:09.109] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:06:09.109] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:06:09.129] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:06:09.149] (Main Well                        :   0) Stop routine
[2018-01-12 19:06:09.149] (Main Well                        :   0) @Stop
[2018-01-12 19:06:09.389] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:06:09.389] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:06:09.399] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:06:09.399] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:06:09.409] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:06:09.409] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:06:11.389] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:06:11.389] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:06:11.389] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:06:11.389] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:06:11.429] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:06:11.429] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:05:57.319] (Detector                         :  17) @Stop
[2018-01-12 19:06:22.181] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:06:22.181] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:06:22.181] (MainPre Routine                  :   0) @Run
[2018-01-12 19:06:22.181] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:06:28.121] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:06:28.121] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:06:28.121] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:06:28.761] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:06:28.761] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:06:28.771] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:06:30.501] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:06:30.501] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:06:30.501] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:06:30.661] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:06:30.711] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:06:30.731] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:06:30.981] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:06:30.981] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:06:30.981] (Initialize P1                    :   3) @Run
[2018-01-12 19:06:30.981] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:06:31.031] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:06:31.031] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:06:31.031] (Initialize P2                    :   4) @Run
[2018-01-12 19:06:31.031] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:06:31.211] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:31.441] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:31.561] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:06:31.611] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:31.611] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:31.661] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:06:31.711] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:31.711] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:31.901] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:06:31.951] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:31.951] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:32.001] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:06:32.051] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:32.051] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:32.101] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:06:32.151] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:32.151] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:32.201] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:06:32.251] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:32.251] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:32.301] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:06:32.351] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:32.351] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:32.401] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:06:32.451] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:32.451] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:32.521] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:06:32.571] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:32.571] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:32.761] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:06:32.811] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:32.811] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:32.861] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:06:32.911] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:32.911] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:32.961] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:06:33.011] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:33.011] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:33.061] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:06:33.111] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:33.111] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:33.161] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:06:33.211] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:33.211] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:33.261] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:06:33.311] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:33.311] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:33.381] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:06:33.431] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:33.431] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:33.621] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:06:33.671] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:33.671] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:33.721] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:06:33.771] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:06:33.771] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:33.821] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:06:33.871] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:06:33.871] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:06:33.871] (Initialize P1                    :   3) @Stop
[2018-01-12 19:06:33.921] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:06:33.971] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:06:33.971] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:06:33.971] (Initialize P2                    :   4) @Stop
[2018-01-12 19:06:34.231] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:06:34.431] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:06:34.461] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:06:34.461] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:06:34.461] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:06:34.461] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:06:34.461] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:34.461] (PreFillP1                        :   6) @Run
[2018-01-12 19:06:34.461] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:06:34.511] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:06:34.511] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:06:34.511] (PreFillP2                        :   7) @Run
[2018-01-12 19:06:34.511] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:06:34.611] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:34.881] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:34.931] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:34.931] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:35.241] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:35.291] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:35.291] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:35.541] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:35.591] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:35.591] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:35.741] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:35.791] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:35.791] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:35.961] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:36.011] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:36.011] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:36.301] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:36.351] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:36.351] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:36.601] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:36.651] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:06:36.651] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:36.701] (PreFillP1                        :   6) @Stop
[2018-01-12 19:06:36.801] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:36.851] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:06:36.851] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:37.021] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:37.071] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:06:37.071] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:37.261] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:37.311] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:06:37.311] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:37.461] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:37.511] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:06:37.511] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:37.611] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:37.661] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:06:37.661] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:37.811] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:37.861] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:06:37.861] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:38.071] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:38.121] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:06:38.121] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:06:38.121] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:06:38.161] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:06:38.171] (PreFillP2                        :   7) @Stop
[2018-01-12 19:06:38.211] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:06:38.211] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:06:38.211] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:06:38.231] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:38.281] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:06:38.301] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:06:38.551] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:06:38.551] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:38.551] (Flush Capillary                  :   9) @Run
[2018-01-12 19:06:38.551] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:06:38.601] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:06:38.601] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:06:38.601] (Flush Singulator                 :  10) @Run
[2018-01-12 19:06:38.601] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:06:38.701] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:38.951] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:39.001] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:39.001] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:39.151] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:39.201] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:39.201] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:39.371] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:39.421] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:39.421] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:39.711] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:39.761] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:39.761] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:40.011] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:40.061] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:40.061] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:40.211] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:40.261] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:40.261] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:40.431] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:40.481] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:40.481] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:40.771] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:40.821] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:06:40.821] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:40.871] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:06:40.971] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:06:41.071] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:41.121] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:06:41.121] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:06:41.121] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:06:41.161] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:06:41.181] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:06:41.181] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:06:41.181] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:06:41.221] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:41.271] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:06:41.381] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:06:41.631] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:06:41.631] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:41.631] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:06:41.631] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:06:41.681] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:06:41.681] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:06:41.681] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:06:41.681] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:06:41.781] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:42.051] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:42.101] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:42.101] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:42.411] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:42.461] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:42.461] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:42.711] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:42.761] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:42.761] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:42.911] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:42.961] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:42.961] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:43.131] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:43.181] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:43.181] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:43.231] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:06:43.471] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:43.521] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:06:43.521] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:43.571] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:06:43.671] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:43.721] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:06:43.721] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:06:43.721] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:06:43.731] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:06:43.731] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:06:43.731] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:06:43.731] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:06:43.731] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:06:43.731] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:06:43.731] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:43.731] (PreFillP1                        :   6) @Run
[2018-01-12 19:06:43.731] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:06:43.781] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:06:43.781] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:06:43.781] (PreFillP2                        :   7) @Run
[2018-01-12 19:06:43.781] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:06:43.881] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:44.171] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:44.221] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:44.221] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:44.511] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:44.561] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:44.561] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:44.711] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:44.761] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:44.761] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:44.911] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:44.961] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:44.961] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:45.131] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:45.181] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:45.181] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:45.471] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:45.521] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:45.521] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:45.771] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:45.821] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:45.821] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:45.971] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:46.021] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:06:46.021] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:46.071] (PreFillP1                        :   6) @Stop
[2018-01-12 19:06:46.191] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:46.241] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:06:46.241] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:46.531] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:46.581] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:06:46.581] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:46.731] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:46.781] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:06:46.781] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:46.881] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:46.931] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:06:46.931] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:47.081] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:47.131] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:06:47.131] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:47.341] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:06:47.391] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:06:47.391] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:06:47.391] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:06:47.431] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:06:47.441] (PreFillP2                        :   7) @Stop
[2018-01-12 19:06:47.481] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:06:47.481] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:06:47.481] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:06:47.501] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:47.551] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:06:47.581] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:06:47.831] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:06:47.831] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:47.831] (Flush Capillary                  :   9) @Run
[2018-01-12 19:06:47.831] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:06:47.881] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:06:47.881] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:06:47.881] (Flush Singulator                 :  10) @Run
[2018-01-12 19:06:47.881] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:06:47.981] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:48.221] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:48.271] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:48.271] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:48.421] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:48.471] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:48.471] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:48.641] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:48.691] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:48.691] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:48.981] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:49.031] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:49.031] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:49.281] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:49.331] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:49.331] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:49.481] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:49.531] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:49.531] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:49.701] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:49.751] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:49.751] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:50.041] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:50.091] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:06:50.091] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:50.141] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:06:50.241] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:06:50.341] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:06:50.391] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:06:50.391] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:06:50.391] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:06:50.431] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:06:50.451] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:06:50.451] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:06:50.451] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:06:50.491] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:50.541] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:06:50.651] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:06:50.901] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:06:50.901] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:50.901] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:06:50.901] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:06:50.951] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:06:50.951] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:06:50.951] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:06:50.951] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:06:51.051] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:51.331] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:51.381] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:51.381] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:51.691] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:51.741] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:51.741] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:51.991] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:52.041] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:52.041] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:52.191] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:52.241] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:52.241] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:52.411] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:52.461] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:06:52.461] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:52.511] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:06:52.751] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:52.801] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:06:52.801] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:52.851] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:06:52.951] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:06:53.001] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:06:53.001] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:06:53.001] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:06:53.051] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:06:53.051] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:06:53.051] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:06:53.051] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:06:53.051] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:06:53.051] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:06:53.051] (Prefill before Flush             :  14) @Run
[2018-01-12 19:06:53.051] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:06:53.051] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:06:53.051] (PreFillP1                        :  15) @Run
[2018-01-12 19:06:53.051] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:06:53.101] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:06:53.101] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:06:53.101] (PreFillP2                        :  16) @Run
[2018-01-12 19:06:53.101] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:06:53.201] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:53.421] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:06:53.471] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:06:53.471] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:53.761] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:06:53.811] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:06:53.811] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:53.861] (PreFillP1                        :  15) @Stop
[2018-01-12 19:06:53.961] (PreFillP2                        :  16) @Stop
[2018-01-12 19:06:54.061] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:06:54.111] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:06:54.111] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:06:54.111] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:06:54.151] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:06:54.171] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:06:54.171] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:05:57.319] (Detector                         :   2) @Stop
[2018-01-12 19:06:54.271] ** STARTING B05 MAIN ROUTINE **
[2018-01-12 19:06:54.271] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:06:54.271] (Main Well                        :   0) @Run
[2018-01-12 19:06:54.271] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:06:54.271] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:06:54.271] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:06:54.271] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:06:54.271] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:06:54.271] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:06:54.271] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:06:54.271] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:06:54.271] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:06:54.271] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:06:54.841] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:06:54.841] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:06:54.871] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:06:55.001] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:06:55.001] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:06:55.001] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:06:55.001] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:06:55.001] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:06:55.001] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:06:55.001] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:06:55.001] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:06:55.001] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:06:55.001] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:06:55.021] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:06:55.071] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:06:55.091] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:06:55.341] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:06:55.341] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:06:55.341] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:06:55.341] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:06:55.391] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:06:55.391] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:06:55.391] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:06:55.391] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:06:55.491] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:55.761] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:06:55.811] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:06:55.811] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:56.121] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:06:56.171] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:06:56.171] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:56.421] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:06:56.471] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:06:56.471] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:56.621] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:06:56.671] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:06:56.671] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:56.721] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:06:56.841] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:06:56.891] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:06:56.891] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:06:56.941] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:06:57.181] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:06:57.231] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:06:57.231] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:06:57.231] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:06:57.231] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:06:57.231] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:06:57.291] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:06:57.341] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:06:57.401] (Main Well                        :   0) Move to Well 17 with z-offset of 2540 um (Wait)
[2018-01-12 19:06:59.701] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:06:59.941] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:06:59.991] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:06:59.991] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:00.091] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:07:00.141] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:07:00.141] (Main Well                        :   0) Stop Pump
[2018-01-12 19:07:00.181] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:07:00.241] (Main Well                        :   0) Move to Well 17 with z-offset of 310 um (Wait)
[2018-01-12 19:07:10.101] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:10.341] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:07:10.391] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:07:10.391] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:07:10.391] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:07:10.391] (Pickup Sample                    :  21) @Run
[2018-01-12 19:07:10.391] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:07:15.063] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:07:17.143] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:07:17.223] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:07:17.423] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:17.523] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:17.573] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:17.573] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:17.673] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:17.723] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:17.723] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:17.823] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:17.873] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:17.873] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:17.983] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:18.033] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:18.033] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:18.223] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:18.273] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:18.273] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:18.373] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:18.423] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:18.423] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:18.523] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:18.573] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:18.573] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:18.673] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:18.723] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:18.723] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:18.933] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:18.983] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:18.983] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:19.083] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:19.133] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:19.133] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:19.233] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:19.283] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:19.283] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:19.383] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:19.433] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:19.433] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:19.653] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:19.703] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:19.703] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:19.803] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:19.853] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:19.853] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:19.953] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:20.003] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:20.003] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:20.103] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:20.153] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:20.153] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:20.363] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:20.413] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:20.413] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:20.513] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:20.563] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:20.563] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:20.663] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:20.713] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:20.713] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:20.813] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:20.863] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:20.863] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:21.073] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:21.123] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:21.123] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:21.223] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:21.273] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:21.273] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:21.373] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:21.423] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:21.423] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:21.523] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:21.573] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:21.573] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:21.783] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:21.833] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:21.833] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:21.933] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:21.983] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:21.983] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:22.083] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:22.133] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:22.133] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:22.233] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:22.283] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:22.283] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:22.493] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:22.543] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:22.543] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:22.643] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:22.693] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:22.693] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:22.793] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:22.843] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:22.843] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:22.943] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:22.993] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:22.993] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:23.203] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:23.253] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:23.253] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:23.353] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:23.403] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:23.403] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:23.503] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:23.553] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:23.553] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:23.653] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:23.703] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:23.703] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:23.913] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:23.963] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:23.963] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:24.063] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:24.113] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:24.113] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:24.213] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:24.263] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:24.263] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:24.363] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:24.413] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:24.413] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:24.623] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:24.673] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:24.673] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:24.773] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:24.823] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:24.823] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:24.923] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:24.973] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:24.973] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:25.073] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:25.123] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:25.123] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:25.333] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:25.383] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:25.383] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:25.483] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:25.533] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:25.533] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:25.633] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:25.683] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:25.683] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:25.783] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:25.833] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:25.833] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:26.043] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:26.093] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:26.093] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:26.193] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:26.243] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:26.243] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:26.343] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:26.393] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:26.393] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:26.493] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:26.543] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:07:26.543] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:07:26.753] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:26.803] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:07:26.803] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:07:26.903] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:07:26.953] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:07:26.953] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:07:26.953] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:07:27.193] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:07:27.333] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:07:27.583] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:07:27.603] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:07:27.653] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:07:27.653] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:07:27.653] (Singulate Sample                 :  22) @Run
[2018-01-12 19:07:27.653] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:07:27.653] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:07:27.653] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:07:27.713] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:07:27.763] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:07:27.823] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:07:27.923] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_B05_RAW.qlb"
[2018-01-12 19:07:28.023] (Detector                         :   2) @Run
[2018-01-12 19:07:28.023] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:08:07.923] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:08:08.973] (Detector                         :   2) @Stop
[2018-01-12 19:08:09.123] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:08:09.123] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:09.223] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:08:09.273] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:08:09.273] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:09.383] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:08:09.433] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:08:09.433] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:08:09.433] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:08:09.653] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:08:09.653] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:08:09.653] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:08:09.653] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:08:09.653] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:08:09.653] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:08:09.653] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:09.653] (PreFillP1                        :  24) @Run
[2018-01-12 19:08:09.653] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:08:09.703] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:08:09.703] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:08:09.703] (PreFillP2                        :  25) @Run
[2018-01-12 19:08:09.703] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:08:09.803] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:10.073] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:10.123] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:10.123] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:10.273] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:10.323] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:10.323] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:10.643] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:10.693] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:10.693] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:10.943] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:10.993] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:10.993] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:11.143] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:11.193] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:11.193] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:11.363] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:11.413] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:11.413] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:11.703] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:11.753] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:11.753] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:12.003] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:12.053] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:12.053] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:12.203] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:12.253] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:12.253] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:12.423] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:12.473] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:12.473] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:12.763] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:12.813] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:08:12.813] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:12.863] (PreFillP1                        :  24) @Stop
[2018-01-12 19:08:13.063] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:13.113] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:08:13.113] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:13.213] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:13.263] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:08:13.263] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:13.433] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:08:13.483] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:08:13.483] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:08:13.483] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:08:13.503] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:08:13.503] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:08:13.503] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:08:13.603] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:08:13.653] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:08:13.703] (PreFillP2                        :  25) @Stop
[2018-01-12 19:08:13.723] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:08:13.973] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:08:13.973] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:08:13.973] (Flush Capillary                  :  27) @Run
[2018-01-12 19:08:13.973] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:08:14.023] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:08:14.023] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:08:14.023] (Flush Singulator                 :  28) @Run
[2018-01-12 19:08:14.023] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:08:14.123] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:14.415] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:08:14.465] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:14.465] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:14.755] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:08:14.805] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:14.805] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:14.955] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:08:15.005] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:15.005] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:15.155] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:08:15.205] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:15.205] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:15.375] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:08:15.425] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:08:15.425] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:15.475] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:08:15.725] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:08:15.775] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:08:15.775] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:08:15.775] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:08:15.815] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:08:15.825] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:08:15.845] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:08:15.845] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:08:15.845] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:08:15.865] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:08:15.915] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:08:15.935] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:08:16.185] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:08:16.185] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:08:16.185] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:08:16.185] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:08:16.235] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:08:16.235] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:08:16.235] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:08:16.235] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:08:16.335] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:16.505] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:08:16.555] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:16.555] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:16.805] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:08:16.855] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:16.855] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:17.165] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:08:17.215] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:08:17.215] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:17.265] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:08:17.365] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:08:17.465] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:08:17.515] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:08:17.515] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:08:17.515] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:08:17.545] (Main Well                        :   0) Stop Pump
[2018-01-12 19:08:17.585] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:08:17.585] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:08:17.585] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:08:17.625] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:08:17.675] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:08:17.785] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:08:18.035] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:08:18.035] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:08:18.035] (Flush Capillary                  :  33) @Run
[2018-01-12 19:08:18.035] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:08:18.085] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:08:18.085] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:08:18.085] (Flush Singulator                 :  34) @Run
[2018-01-12 19:08:18.085] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:08:18.185] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:18.455] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:08:18.505] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:18.505] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:18.825] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:08:18.875] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:08:18.875] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:18.925] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:08:19.025] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:08:19.125] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:08:19.175] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:08:19.175] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:08:19.175] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:08:19.185] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:08:19.205] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:08:19.205] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:08:19.205] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:08:19.225] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:08:19.275] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:08:19.405] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:08:19.655] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:08:19.655] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:08:19.655] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:08:19.655] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:08:19.705] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:08:19.705] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:08:19.705] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:08:19.705] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:08:19.805] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:20.075] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:08:20.125] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:20.125] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:20.435] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:08:20.485] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:08:20.485] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:20.535] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:08:20.635] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:08:20.735] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:08:20.785] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:08:20.785] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:08:20.785] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:08:20.805] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:08:20.825] (Main Well                        :   0) Stop routine
[2018-01-12 19:08:20.825] (Main Well                        :   0) @Stop
[2018-01-12 19:08:21.075] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:08:21.075] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:08:21.085] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:08:21.085] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:08:21.095] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:08:21.095] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:08:23.075] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:08:23.075] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:08:23.075] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:08:23.075] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:08:23.115] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:08:23.115] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:08:08.973] (Detector                         :  17) @Stop
[2018-01-12 19:08:26.905] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:08:26.905] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:08:26.905] (MainPre Routine                  :   0) @Run
[2018-01-12 19:08:26.905] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:08:33.095] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:08:33.095] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:08:33.095] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:08:33.735] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:08:33.735] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:08:33.745] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:08:35.475] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:08:35.475] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:08:35.475] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:08:35.635] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:08:35.685] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:08:35.705] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:08:35.955] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:08:35.955] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:08:35.955] (Initialize P1                    :   3) @Run
[2018-01-12 19:08:35.955] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:08:36.005] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:08:36.005] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:08:36.005] (Initialize P2                    :   4) @Run
[2018-01-12 19:08:36.005] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:08:36.185] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:36.415] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:36.535] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:08:36.585] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:36.585] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:36.645] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:08:36.695] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:36.695] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:36.885] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:08:36.935] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:36.935] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:36.985] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:08:37.035] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:37.035] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:37.085] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:08:37.135] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:37.135] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:37.185] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:08:37.235] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:37.235] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:37.285] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:08:37.335] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:37.335] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:37.385] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:08:37.435] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:37.435] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:37.505] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:08:37.555] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:37.555] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:37.745] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:08:37.795] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:37.795] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:37.845] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:08:37.895] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:37.895] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:37.945] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:08:37.995] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:37.995] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:38.045] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:08:38.095] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:38.095] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:38.145] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:08:38.195] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:38.195] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:38.245] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:08:38.295] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:38.295] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:38.365] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:08:38.415] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:38.415] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:38.605] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:08:38.655] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:38.655] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:38.705] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:08:38.755] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:08:38.755] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:38.805] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:08:38.855] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:08:38.855] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:08:38.855] (Initialize P1                    :   3) @Stop
[2018-01-12 19:08:38.905] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:08:38.955] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:08:38.955] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:08:38.955] (Initialize P2                    :   4) @Stop
[2018-01-12 19:08:39.205] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:08:39.405] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:08:39.425] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:08:39.425] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:08:39.425] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:08:39.425] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:08:39.425] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:39.425] (PreFillP1                        :   6) @Run
[2018-01-12 19:08:39.425] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:08:39.475] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:08:39.475] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:08:39.475] (PreFillP2                        :   7) @Run
[2018-01-12 19:08:39.475] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:08:39.575] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:39.845] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:39.895] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:39.895] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:40.205] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:40.255] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:40.255] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:40.505] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:40.555] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:40.555] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:40.715] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:40.765] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:40.765] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:40.935] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:40.985] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:40.985] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:41.275] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:41.325] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:41.325] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:41.575] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:41.625] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:08:41.625] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:41.675] (PreFillP1                        :   6) @Stop
[2018-01-12 19:08:41.775] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:41.825] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:08:41.825] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:41.995] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:42.045] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:08:42.045] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:42.235] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:42.285] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:08:42.285] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:42.435] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:42.485] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:08:42.485] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:42.585] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:42.635] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:08:42.635] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:42.785] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:42.835] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:08:42.835] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:43.045] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:43.095] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:08:43.095] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:08:43.095] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:08:43.125] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:08:43.145] (PreFillP2                        :   7) @Stop
[2018-01-12 19:08:43.185] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:08:43.185] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:08:43.185] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:08:43.205] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:43.255] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:08:43.275] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:08:43.525] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:08:43.525] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:43.525] (Flush Capillary                  :   9) @Run
[2018-01-12 19:08:43.525] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:08:43.575] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:08:43.575] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:08:43.575] (Flush Singulator                 :  10) @Run
[2018-01-12 19:08:43.575] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:08:43.675] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:43.925] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:43.975] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:43.975] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:44.125] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:44.175] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:44.175] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:44.345] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:44.395] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:44.395] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:44.685] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:44.735] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:44.735] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:44.985] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:45.035] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:45.035] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:45.185] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:45.235] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:45.235] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:45.405] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:45.455] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:45.455] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:45.745] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:45.795] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:08:45.795] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:45.845] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:08:45.945] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:08:46.045] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:46.095] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:08:46.095] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:08:46.095] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:08:46.135] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:08:46.155] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:08:46.155] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:08:46.155] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:08:46.195] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:46.245] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:08:46.355] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:08:46.605] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:08:46.605] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:46.605] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:08:46.605] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:08:46.655] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:08:46.655] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:08:46.655] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:08:46.655] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:08:46.755] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:47.025] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:47.075] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:47.075] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:47.385] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:47.435] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:47.435] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:47.685] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:47.735] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:47.735] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:47.885] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:47.935] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:47.935] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:48.105] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:48.155] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:48.155] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:48.205] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:08:48.445] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:48.495] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:08:48.495] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:48.545] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:08:48.645] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:48.695] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:08:48.695] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:08:48.695] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:08:48.705] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:08:48.705] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:08:48.705] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:08:48.705] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:08:48.705] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:08:48.705] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:08:48.705] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:48.705] (PreFillP1                        :   6) @Run
[2018-01-12 19:08:48.705] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:08:48.755] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:08:48.755] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:08:48.755] (PreFillP2                        :   7) @Run
[2018-01-12 19:08:48.755] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:08:48.855] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:49.145] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:49.195] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:49.195] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:49.485] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:49.535] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:49.535] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:49.685] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:49.735] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:49.735] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:49.885] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:49.935] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:49.935] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:50.105] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:50.155] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:50.155] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:50.445] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:50.495] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:50.495] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:50.745] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:50.795] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:08:50.795] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:50.945] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:50.995] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:08:50.995] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:51.045] (PreFillP1                        :   6) @Stop
[2018-01-12 19:08:51.165] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:51.215] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:08:51.215] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:51.505] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:51.555] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:08:51.555] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:51.705] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:51.755] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:08:51.755] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:51.855] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:51.905] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:08:51.905] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:52.055] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:52.105] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:08:52.105] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:52.315] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:08:52.365] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:08:52.365] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:08:52.365] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:08:52.405] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:08:52.415] (PreFillP2                        :   7) @Stop
[2018-01-12 19:08:52.455] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:08:52.455] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:08:52.455] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:08:52.475] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:52.525] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:08:52.545] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:08:52.795] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:08:52.795] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:52.795] (Flush Capillary                  :   9) @Run
[2018-01-12 19:08:52.795] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:08:52.845] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:08:52.845] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:08:52.845] (Flush Singulator                 :  10) @Run
[2018-01-12 19:08:52.845] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:08:52.945] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:53.195] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:53.245] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:53.245] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:53.395] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:53.445] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:53.445] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:53.615] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:53.665] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:53.665] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:53.955] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:54.005] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:54.005] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:54.255] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:54.305] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:54.305] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:54.455] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:54.505] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:54.505] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:54.675] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:54.725] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:54.725] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:55.015] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:55.065] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:08:55.065] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:55.115] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:08:55.215] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:08:55.315] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:08:55.365] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:08:55.365] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:08:55.365] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:08:55.405] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:08:55.425] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:08:55.425] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:08:55.425] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:08:55.465] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:55.515] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:08:55.625] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:08:55.875] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:08:55.875] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:55.875] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:08:55.875] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:08:55.925] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:08:55.925] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:08:55.925] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:08:55.925] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:08:56.025] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:56.295] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:56.345] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:56.345] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:56.655] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:56.705] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:56.705] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:56.955] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:57.005] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:57.005] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:57.155] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:57.205] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:08:57.205] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:57.515] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:57.565] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:08:57.565] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:57.615] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:08:57.715] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:08:57.815] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:08:57.865] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:08:57.865] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:08:57.865] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:08:57.875] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:08:57.875] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:08:57.875] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:08:57.875] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:08:57.875] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:08:57.875] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:08:57.875] (Prefill before Flush             :  14) @Run
[2018-01-12 19:08:57.875] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:08:57.875] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:08:57.875] (PreFillP1                        :  15) @Run
[2018-01-12 19:08:57.875] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:08:57.925] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:08:57.925] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:08:57.925] (PreFillP2                        :  16) @Run
[2018-01-12 19:08:57.925] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:08:58.025] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:08:58.455] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:08:58.505] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:08:58.505] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:08:58.555] (PreFillP1                        :  15) @Stop
[2018-01-12 19:08:58.655] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:08:58.705] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:08:58.705] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:08:58.705] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:08:58.725] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:08:58.755] (PreFillP2                        :  16) @Stop
[2018-01-12 19:08:58.775] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:08:58.775] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:08:08.973] (Detector                         :   2) @Stop
[2018-01-12 19:08:58.985] ** STARTING C05 MAIN ROUTINE **
[2018-01-12 19:08:58.985] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:08:58.985] (Main Well                        :   0) @Run
[2018-01-12 19:08:58.985] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:08:58.985] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:08:58.985] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:08:58.985] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:08:58.985] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:08:58.985] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:08:58.985] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:08:58.985] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:08:58.985] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:08:58.985] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:08:59.485] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:08:59.485] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:08:59.535] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:08:59.645] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:08:59.645] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:08:59.645] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:08:59.645] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:08:59.645] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:08:59.645] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:08:59.645] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:08:59.645] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:08:59.645] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:08:59.645] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:08:59.665] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:08:59.715] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:08:59.735] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:08:59.985] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:08:59.985] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:08:59.985] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:08:59.985] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:09:00.035] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:09:00.035] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:09:00.035] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:09:00.035] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:09:00.135] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:09:00.405] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:09:00.455] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:09:00.455] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:09:00.775] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:09:00.825] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:09:00.825] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:09:01.075] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:09:01.125] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:09:01.125] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:09:01.275] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:09:01.325] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:09:01.325] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:09:01.375] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:09:01.495] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:09:01.545] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:09:01.545] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:01.595] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:09:01.835] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:09:01.885] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:09:01.885] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:09:01.885] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:09:01.885] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:09:01.885] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:09:01.945] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:09:01.995] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:09:02.055] (Main Well                        :   0) Move to Well 29 with z-offset of 2540 um (Wait)
[2018-01-12 19:09:04.695] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:09:04.935] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:09:04.985] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:09:04.985] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:05.085] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:09:05.135] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:09:05.135] (Main Well                        :   0) Stop Pump
[2018-01-12 19:09:05.175] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:09:05.235] (Main Well                        :   0) Move to Well 29 with z-offset of 310 um (Wait)
[2018-01-12 19:09:15.217] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:15.457] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:09:15.507] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:09:15.507] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:09:15.507] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:09:15.507] (Pickup Sample                    :  21) @Run
[2018-01-12 19:09:15.507] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:09:20.177] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:09:22.617] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:09:22.697] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:09:22.897] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:22.997] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:23.047] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:23.047] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:23.147] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:23.197] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:23.197] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:23.297] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:23.347] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:23.347] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:23.457] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:23.507] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:23.507] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:23.697] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:23.747] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:23.747] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:23.847] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:23.897] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:23.897] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:23.997] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:24.047] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:24.047] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:24.147] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:24.197] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:24.197] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:24.407] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:24.457] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:24.457] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:24.557] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:24.607] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:24.607] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:24.707] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:24.757] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:24.757] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:24.857] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:24.907] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:24.907] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:25.117] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:25.167] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:25.167] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:25.277] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:25.327] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:25.327] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:25.427] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:25.477] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:25.477] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:25.577] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:25.627] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:25.627] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:25.837] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:25.887] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:25.887] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:25.987] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:26.037] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:26.037] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:26.137] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:26.187] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:26.187] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:26.287] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:26.337] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:26.337] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:26.547] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:26.597] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:26.597] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:26.697] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:26.747] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:26.747] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:26.847] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:26.897] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:26.897] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:26.997] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:27.047] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:27.047] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:27.257] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:27.307] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:27.307] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:27.407] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:27.457] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:27.457] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:27.557] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:27.607] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:27.607] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:27.707] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:27.757] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:27.757] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:27.967] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:28.017] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:28.017] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:28.117] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:28.167] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:28.167] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:28.267] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:28.317] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:28.317] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:28.417] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:28.467] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:28.467] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:28.677] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:28.727] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:28.727] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:28.827] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:28.877] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:28.877] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:28.977] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:29.027] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:29.027] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:29.127] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:29.177] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:29.177] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:29.387] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:29.437] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:29.437] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:29.537] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:29.587] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:29.587] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:29.687] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:29.737] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:29.737] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:29.837] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:29.887] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:29.887] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:30.097] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:30.147] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:30.147] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:30.247] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:30.297] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:30.297] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:30.397] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:30.447] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:30.447] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:30.547] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:30.597] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:30.597] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:30.807] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:30.857] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:30.857] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:30.957] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:31.007] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:31.007] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:31.107] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:31.157] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:31.157] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:31.257] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:31.307] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:31.307] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:31.517] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:31.567] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:31.567] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:31.667] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:31.717] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:31.717] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:31.817] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:31.867] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:31.867] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:31.967] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:32.017] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:09:32.017] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:09:32.227] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:32.277] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:09:32.277] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:09:32.377] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:09:32.427] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:09:32.427] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:09:32.427] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:09:32.707] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:09:32.807] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:09:33.057] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:09:33.077] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:09:33.127] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:09:33.127] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:09:33.127] (Singulate Sample                 :  22) @Run
[2018-01-12 19:09:33.127] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:09:33.127] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:09:33.127] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:09:33.187] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:09:33.237] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:09:33.297] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:09:33.397] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_C05_RAW.qlb"
[2018-01-12 19:09:33.507] (Detector                         :   2) @Run
[2018-01-12 19:09:33.507] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:10:13.407] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:10:14.477] (Detector                         :   2) @Stop
[2018-01-12 19:10:14.607] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:10:14.607] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:14.707] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:10:14.757] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:10:14.757] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:14.857] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:10:14.907] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:10:14.907] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:10:14.907] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:10:15.127] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:10:15.127] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:10:15.127] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:10:15.127] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:10:15.127] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:10:15.127] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:10:15.127] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:15.127] (PreFillP1                        :  24) @Run
[2018-01-12 19:10:15.127] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:10:15.177] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:10:15.177] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:10:15.177] (PreFillP2                        :  25) @Run
[2018-01-12 19:10:15.177] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:10:15.277] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:15.547] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:15.597] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:15.597] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:15.747] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:15.797] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:15.797] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:16.117] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:16.167] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:16.167] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:16.417] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:16.467] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:16.467] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:16.627] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:16.677] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:16.677] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:16.847] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:16.897] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:16.897] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:17.187] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:17.237] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:17.237] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:17.487] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:17.537] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:17.537] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:17.687] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:17.737] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:17.737] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:17.907] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:17.957] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:17.957] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:18.247] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:18.297] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:10:18.297] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:18.347] (PreFillP1                        :  24) @Stop
[2018-01-12 19:10:18.547] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:18.597] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:10:18.597] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:18.697] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:18.747] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:10:18.747] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:18.917] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:10:18.967] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:10:18.967] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:10:18.967] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:10:18.977] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:10:18.977] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:10:18.977] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:10:19.077] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:10:19.127] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:10:19.177] (PreFillP2                        :  25) @Stop
[2018-01-12 19:10:19.197] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:10:19.447] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:10:19.447] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:10:19.447] (Flush Capillary                  :  27) @Run
[2018-01-12 19:10:19.447] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:10:19.497] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:10:19.497] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:10:19.497] (Flush Singulator                 :  28) @Run
[2018-01-12 19:10:19.497] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:10:19.597] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:19.887] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:10:19.937] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:19.937] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:20.227] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:10:20.277] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:20.277] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:20.427] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:10:20.477] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:20.477] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:20.627] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:10:20.677] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:20.677] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:20.847] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:10:20.897] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:10:20.897] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:20.947] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:10:21.187] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:10:21.237] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:10:21.237] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:10:21.237] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:10:21.277] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:10:21.287] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:10:21.307] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:10:21.307] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:10:21.307] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:10:21.327] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:10:21.377] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:10:21.397] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:10:21.647] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:10:21.647] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:10:21.647] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:10:21.647] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:10:21.697] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:10:21.697] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:10:21.697] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:10:21.697] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:10:21.797] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:21.967] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:10:22.017] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:22.017] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:22.267] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:10:22.317] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:22.317] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:22.627] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:10:22.677] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:10:22.677] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:22.727] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:10:22.827] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:10:22.927] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:10:22.977] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:10:22.977] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:10:22.977] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:10:23.007] (Main Well                        :   0) Stop Pump
[2018-01-12 19:10:23.047] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:10:23.047] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:10:23.047] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:10:23.087] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:10:23.137] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:10:23.247] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:10:23.497] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:10:23.497] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:10:23.497] (Flush Capillary                  :  33) @Run
[2018-01-12 19:10:23.497] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:10:23.547] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:10:23.547] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:10:23.547] (Flush Singulator                 :  34) @Run
[2018-01-12 19:10:23.547] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:10:23.647] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:23.917] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:10:23.967] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:23.967] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:24.277] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:10:24.327] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:10:24.327] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:24.377] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:10:24.477] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:10:24.577] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:10:24.627] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:10:24.627] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:10:24.627] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:10:24.647] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:10:24.667] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:10:24.667] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:10:24.667] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:10:24.687] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:10:24.737] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:10:24.867] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:10:25.117] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:10:25.117] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:10:25.117] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:10:25.117] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:10:25.167] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:10:25.167] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:10:25.167] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:10:25.167] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:10:25.267] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:25.537] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:10:25.587] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:25.587] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:25.897] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:10:25.947] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:10:25.947] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:25.997] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:10:26.097] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:10:26.197] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:10:26.247] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:10:26.247] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:10:26.247] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:10:26.267] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:10:26.287] (Main Well                        :   0) Stop routine
[2018-01-12 19:10:26.287] (Main Well                        :   0) @Stop
[2018-01-12 19:10:26.537] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:10:26.537] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:10:26.547] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:10:26.547] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:10:26.547] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:10:26.547] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:10:28.537] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:10:28.537] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:10:28.537] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:10:28.537] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:10:28.577] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:10:28.577] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:10:14.477] (Detector                         :  17) @Stop
[2018-01-12 19:10:32.767] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:10:32.767] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:10:32.767] (MainPre Routine                  :   0) @Run
[2018-01-12 19:10:32.767] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:10:38.887] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:10:38.887] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:10:38.887] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:10:39.527] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:10:39.527] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:10:39.537] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:10:41.267] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:10:41.267] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:10:41.267] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:10:41.427] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:10:41.477] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:10:41.497] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:10:41.747] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:10:41.747] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:10:41.747] (Initialize P1                    :   3) @Run
[2018-01-12 19:10:41.747] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:10:41.797] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:10:41.797] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:10:41.797] (Initialize P2                    :   4) @Run
[2018-01-12 19:10:41.797] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:10:41.977] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:42.207] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:42.327] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:10:42.377] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:42.377] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:42.427] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:10:42.477] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:42.477] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:42.667] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:10:42.717] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:42.717] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:42.767] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:10:42.817] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:42.817] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:42.867] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:10:42.917] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:42.917] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:42.967] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:10:43.017] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:43.017] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:43.067] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:10:43.117] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:43.117] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:43.167] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:10:43.217] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:43.217] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:43.287] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:10:43.337] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:43.337] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:43.527] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:10:43.577] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:43.577] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:43.627] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:10:43.677] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:43.677] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:43.727] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:10:43.777] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:43.777] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:43.827] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:10:43.877] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:43.877] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:43.927] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:10:43.977] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:43.977] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:44.027] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:10:44.077] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:44.077] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:44.147] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:10:44.197] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:44.197] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:44.387] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:10:44.437] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:44.437] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:44.487] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:10:44.537] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:10:44.537] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:44.587] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:10:44.637] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:10:44.637] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:10:44.637] (Initialize P1                    :   3) @Stop
[2018-01-12 19:10:44.687] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:10:44.737] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:10:44.737] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:10:44.737] (Initialize P2                    :   4) @Stop
[2018-01-12 19:10:44.997] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:10:45.197] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:10:45.217] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:10:45.217] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:10:45.217] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:10:45.217] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:10:45.217] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:45.217] (PreFillP1                        :   6) @Run
[2018-01-12 19:10:45.217] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:10:45.267] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:10:45.267] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:10:45.267] (PreFillP2                        :   7) @Run
[2018-01-12 19:10:45.267] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:10:45.367] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:45.637] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:45.687] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:45.687] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:45.997] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:46.047] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:46.047] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:46.297] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:46.347] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:46.347] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:46.497] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:46.547] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:46.547] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:46.717] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:46.767] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:46.767] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:47.057] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:47.107] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:47.107] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:47.387] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:47.437] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:10:47.437] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:47.487] (PreFillP1                        :   6) @Stop
[2018-01-12 19:10:47.587] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:47.637] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:10:47.637] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:47.947] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:47.997] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:10:47.997] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:48.147] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:48.197] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:10:48.197] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:48.297] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:48.347] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:10:48.347] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:48.517] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:48.567] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:10:48.567] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:48.757] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:48.807] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:10:48.807] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:48.857] (PreFillP2                        :   7) @Stop
[2018-01-12 19:10:48.957] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:49.007] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:10:49.007] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:10:49.007] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:10:49.017] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:10:49.057] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:10:49.057] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:10:49.057] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:10:49.077] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:49.127] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:10:49.147] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:10:49.397] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:10:49.397] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:49.397] (Flush Capillary                  :   9) @Run
[2018-01-12 19:10:49.397] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:10:49.447] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:10:49.447] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:10:49.447] (Flush Singulator                 :  10) @Run
[2018-01-12 19:10:49.447] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:10:49.547] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:49.817] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:49.867] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:49.867] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:50.037] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:50.087] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:50.087] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:50.377] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:50.427] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:50.427] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:50.677] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:50.727] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:50.727] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:50.877] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:50.927] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:50.927] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:51.097] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:51.147] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:51.147] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:51.437] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:51.487] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:51.487] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:51.537] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:10:51.637] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:10:51.737] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:51.787] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:10:51.787] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:51.887] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:51.937] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:10:51.937] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:10:51.937] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:10:51.957] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:10:52.067] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:10:52.067] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:10:52.067] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:10:52.087] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:10:52.137] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:10:52.157] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:10:52.407] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:10:52.407] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:10:52.407] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:10:52.407] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:10:52.457] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:10:52.457] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:10:52.457] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:10:52.457] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:10:52.557] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:52.847] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:10:52.897] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:52.897] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:53.187] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:10:53.237] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:53.237] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:53.387] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:10:53.437] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:53.437] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:53.587] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:10:53.637] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:53.637] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:53.817] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:10:53.867] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:53.867] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:53.917] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:10:54.157] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:10:54.207] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:10:54.207] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:54.257] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:10:54.357] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:10:54.407] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:10:54.407] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:10:54.407] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:10:54.417] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:10:54.417] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:10:54.417] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:10:54.417] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:10:54.417] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:10:54.417] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:10:54.417] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:54.417] (PreFillP1                        :   6) @Run
[2018-01-12 19:10:54.417] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:10:54.467] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:10:54.467] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:10:54.467] (PreFillP2                        :   7) @Run
[2018-01-12 19:10:54.467] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:10:54.567] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:54.857] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:54.907] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:54.907] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:55.197] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:55.247] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:55.247] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:55.397] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:55.447] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:55.447] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:55.597] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:55.647] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:55.647] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:55.817] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:55.867] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:55.867] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:56.157] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:56.207] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:56.207] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:56.457] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:56.507] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:10:56.507] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:56.657] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:56.707] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:10:56.707] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:56.757] (PreFillP1                        :   6) @Stop
[2018-01-12 19:10:56.877] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:56.927] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:10:56.927] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:57.217] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:57.267] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:10:57.267] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:57.417] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:57.467] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:10:57.467] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:57.567] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:57.617] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:10:57.617] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:57.767] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:57.817] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:10:57.817] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:10:58.027] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:10:58.077] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:10:58.077] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:10:58.077] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:10:58.117] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:10:58.127] (PreFillP2                        :   7) @Stop
[2018-01-12 19:10:58.167] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:10:58.167] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:10:58.167] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:10:58.187] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:58.237] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:10:58.257] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:10:58.507] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:10:58.507] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:58.507] (Flush Capillary                  :   9) @Run
[2018-01-12 19:10:58.507] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:10:58.557] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:10:58.557] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:10:58.557] (Flush Singulator                 :  10) @Run
[2018-01-12 19:10:58.557] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:10:58.657] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:58.907] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:58.957] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:58.957] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:59.107] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:59.157] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:59.157] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:59.327] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:59.377] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:59.377] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:59.667] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:10:59.717] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:10:59.717] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:10:59.967] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:11:00.017] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:11:00.017] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:00.167] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:11:00.217] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:11:00.217] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:00.387] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:11:00.437] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:11:00.437] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:00.727] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:11:00.777] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:11:00.777] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:00.827] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:11:00.927] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:11:01.027] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:11:01.077] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:11:01.077] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:11:01.077] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:11:01.117] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:11:01.137] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:11:01.137] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:11:01.137] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:11:01.177] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:11:01.227] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:11:01.337] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:11:01.587] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:11:01.587] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:11:01.587] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:11:01.587] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:11:01.637] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:11:01.637] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:11:01.637] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:11:01.637] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:11:01.737] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:02.007] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:11:02.057] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:11:02.057] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:02.367] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:11:02.417] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:11:02.417] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:02.667] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:11:02.717] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:11:02.717] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:02.867] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:11:02.917] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:11:02.917] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:03.087] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:11:03.137] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:11:03.137] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:03.187] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:11:03.427] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:11:03.477] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:11:03.477] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:03.527] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:11:03.627] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:11:03.677] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:11:03.677] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:11:03.677] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:11:03.687] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:11:03.687] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:11:03.687] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:11:03.687] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:11:03.687] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:11:03.687] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:11:03.687] (Prefill before Flush             :  14) @Run
[2018-01-12 19:11:03.687] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:11:03.687] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:11:03.687] (PreFillP1                        :  15) @Run
[2018-01-12 19:11:03.687] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:11:03.737] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:11:03.737] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:11:03.737] (PreFillP2                        :  16) @Run
[2018-01-12 19:11:03.737] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:11:03.837] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:04.127] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:11:04.177] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:04.177] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:04.367] (PreFillP1                        :  15) @Stop
[2018-01-12 19:11:04.467] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:11:04.517] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:11:04.517] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:04.567] (PreFillP2                        :  16) @Stop
[2018-01-12 19:11:04.667] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:11:04.717] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:11:04.717] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:11:04.717] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:11:04.737] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:11:04.757] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:11:04.757] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:10:14.477] (Detector                         :   2) @Stop
[2018-01-12 19:11:04.837] ** STARTING D05 MAIN ROUTINE **
[2018-01-12 19:11:04.837] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:11:04.847] (Main Well                        :   0) @Run
[2018-01-12 19:11:04.847] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:11:04.847] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:11:04.847] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:11:04.847] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:11:04.847] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:11:04.847] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:11:04.847] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:11:04.847] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:11:04.847] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:11:04.847] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:11:05.427] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:11:05.427] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:11:05.447] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:11:05.447] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:11:05.587] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:11:05.587] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:11:05.587] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:11:05.587] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:11:05.587] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:11:05.587] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:11:05.587] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:11:05.587] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:11:05.587] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:11:05.607] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:11:05.657] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:11:05.677] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:11:05.927] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:11:05.927] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:11:05.927] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:11:05.927] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:11:05.977] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:11:05.977] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:11:05.977] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:11:05.977] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:11:06.077] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:06.347] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:11:06.397] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:11:06.397] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:06.707] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:11:06.757] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:11:06.757] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:07.007] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:11:07.057] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:11:07.057] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:07.207] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:11:07.257] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:11:07.257] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:07.307] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:11:07.427] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:11:07.477] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:11:07.477] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:07.527] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:11:07.767] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:11:07.817] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:11:07.817] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:11:07.817] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:11:07.817] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:11:07.817] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:11:07.877] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:11:07.927] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:11:07.987] (Main Well                        :   0) Move to Well 41 with z-offset of 2540 um (Wait)
[2018-01-12 19:11:10.687] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:10.927] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:11:10.977] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:11:10.977] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:11.077] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:11:11.127] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:11:11.127] (Main Well                        :   0) Stop Pump
[2018-01-12 19:11:11.167] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:11:11.227] (Main Well                        :   0) Move to Well 41 with z-offset of 310 um (Wait)
[2018-01-12 19:11:21.367] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:21.607] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:11:21.657] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:11:21.657] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:11:21.657] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:11:21.657] (Pickup Sample                    :  21) @Run
[2018-01-12 19:11:21.657] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:11:26.327] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:11:28.767] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:11:28.847] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:11:29.047] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:29.147] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:29.197] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:29.197] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:29.297] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:29.347] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:29.347] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:29.447] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:29.497] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:29.497] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:29.607] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:29.657] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:29.657] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:29.847] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:29.897] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:29.897] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:29.997] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:30.047] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:30.047] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:30.147] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:30.197] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:30.197] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:30.297] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:30.347] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:30.347] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:30.557] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:30.607] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:30.607] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:30.707] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:30.757] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:30.757] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:30.857] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:30.907] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:30.907] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:31.007] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:31.057] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:31.057] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:31.267] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:31.317] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:31.317] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:31.417] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:31.467] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:31.467] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:31.567] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:31.617] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:31.617] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:31.717] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:31.767] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:31.767] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:31.977] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:32.027] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:32.027] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:32.127] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:32.177] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:32.177] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:32.277] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:32.327] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:32.327] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:32.427] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:32.477] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:32.477] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:32.697] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:32.747] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:32.747] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:32.847] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:32.897] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:32.897] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:32.997] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:33.047] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:33.047] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:33.147] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:33.197] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:33.197] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:33.407] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:33.457] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:33.457] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:33.557] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:33.607] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:33.607] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:33.707] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:33.757] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:33.757] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:33.857] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:33.907] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:33.907] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:34.117] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:34.167] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:34.167] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:34.267] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:34.317] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:34.317] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:34.417] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:34.467] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:34.467] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:34.567] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:34.617] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:34.617] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:34.827] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:34.877] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:34.877] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:34.977] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:35.027] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:35.027] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:35.127] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:35.177] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:35.177] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:35.277] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:35.327] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:35.327] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:35.537] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:35.587] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:35.687] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:35.737] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:35.737] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:35.837] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:35.887] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:35.887] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:35.987] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:36.037] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:36.037] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:36.247] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:36.297] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:36.297] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:36.397] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:36.447] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:36.447] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:36.547] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:36.597] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:36.597] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:36.697] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:36.747] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:36.747] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:36.957] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:37.007] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:37.007] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:37.107] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:37.157] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:37.157] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:37.257] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:37.307] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:37.307] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:37.407] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:37.457] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:37.457] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:37.677] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:37.727] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:37.727] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:37.827] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:37.877] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:37.877] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:37.977] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:38.027] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:38.027] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:38.127] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:38.177] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:11:38.177] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:11:38.387] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:38.437] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:11:38.437] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:11:38.537] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:11:38.587] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:11:38.587] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:11:38.587] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:11:38.857] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:11:38.967] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:11:39.217] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:11:39.237] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:11:39.287] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:11:39.287] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:11:39.287] (Singulate Sample                 :  22) @Run
[2018-01-12 19:11:39.287] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:11:39.287] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:11:39.287] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:11:39.347] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:11:39.397] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:11:39.457] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:11:39.557] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_D05_RAW.qlb"
[2018-01-12 19:11:39.657] (Detector                         :   2) @Run
[2018-01-12 19:11:39.657] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:12:19.557] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:12:20.527] (Detector                         :   2) @Stop
[2018-01-12 19:12:20.557] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:12:20.557] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:20.687] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:12:20.737] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:12:20.737] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:20.837] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:12:20.887] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:12:20.887] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:12:20.887] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:12:21.287] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:12:21.287] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:12:21.287] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:12:21.287] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:12:21.287] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:12:21.287] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:12:21.287] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:21.287] (PreFillP1                        :  24) @Run
[2018-01-12 19:12:21.287] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:12:21.337] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:12:21.337] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:12:21.337] (PreFillP2                        :  25) @Run
[2018-01-12 19:12:21.337] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:12:21.437] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:21.717] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:21.767] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:12:21.767] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:21.947] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:21.997] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:12:21.997] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:22.287] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:22.337] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:12:22.337] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:22.587] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:22.637] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:12:22.637] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:22.787] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:22.837] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:12:22.837] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:23.007] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:23.057] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:12:23.057] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:23.347] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:23.397] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:12:23.397] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:23.647] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:23.697] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:12:23.697] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:23.847] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:23.897] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:12:23.897] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:24.067] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:24.117] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:12:24.117] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:24.407] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:24.457] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:12:24.457] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:24.507] (PreFillP1                        :  24) @Stop
[2018-01-12 19:12:24.707] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:24.757] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:12:24.757] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:24.857] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:24.907] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:12:24.907] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:25.077] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:12:25.127] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:12:25.127] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:12:25.127] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:12:25.137] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:12:25.137] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:12:25.137] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:12:25.237] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:12:25.287] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:12:25.337] (PreFillP2                        :  25) @Stop
[2018-01-12 19:12:25.357] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:12:25.607] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:12:25.607] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:12:25.607] (Flush Capillary                  :  27) @Run
[2018-01-12 19:12:25.607] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:12:25.657] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:12:25.657] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:12:25.657] (Flush Singulator                 :  28) @Run
[2018-01-12 19:12:25.657] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:12:25.757] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:26.047] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:12:26.097] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:12:26.097] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:26.387] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:12:26.437] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:12:26.437] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:26.587] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:12:26.637] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:12:26.637] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:26.787] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:12:26.837] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:12:26.837] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:27.007] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:12:27.057] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:12:27.057] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:27.107] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:12:27.347] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:12:27.397] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:12:27.397] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:12:27.397] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:12:27.437] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:12:27.447] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:12:27.467] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:12:27.467] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:12:27.467] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:12:27.487] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:12:27.537] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:12:27.557] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:12:27.807] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:12:27.807] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:12:27.807] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:12:27.807] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:12:27.857] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:12:27.857] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:12:27.857] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:12:27.857] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:12:27.957] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:28.127] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:12:28.177] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:12:28.177] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:28.427] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:12:28.477] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:12:28.477] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:28.787] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:12:28.837] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:12:28.837] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:28.887] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:12:28.987] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:12:29.087] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:12:29.137] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:12:29.137] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:12:29.137] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:12:29.167] (Main Well                        :   0) Stop Pump
[2018-01-12 19:12:29.207] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:12:29.207] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:12:29.207] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:12:29.247] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:12:29.297] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:12:29.407] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:12:29.657] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:12:29.657] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:12:29.657] (Flush Capillary                  :  33) @Run
[2018-01-12 19:12:29.657] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:12:29.707] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:12:29.707] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:12:29.707] (Flush Singulator                 :  34) @Run
[2018-01-12 19:12:29.707] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:12:29.807] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:30.077] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:12:30.127] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:12:30.127] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:30.437] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:12:30.487] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:12:30.487] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:30.537] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:12:30.637] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:12:30.737] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:12:30.787] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:12:30.787] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:12:30.787] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:12:30.807] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:12:30.827] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:12:30.827] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:12:30.827] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:12:30.847] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:12:30.897] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:12:31.027] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:12:31.277] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:12:31.277] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:12:31.277] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:12:31.277] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:12:31.327] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:12:31.327] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:12:31.327] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:12:31.327] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:12:31.427] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:31.697] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:12:31.747] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:12:31.747] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:32.057] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:12:32.107] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:12:32.107] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:32.157] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:12:32.257] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:12:32.357] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:12:32.407] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:12:32.407] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:12:32.407] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:12:32.427] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:12:32.447] (Main Well                        :   0) Stop routine
[2018-01-12 19:12:32.447] (Main Well                        :   0) @Stop
[2018-01-12 19:12:32.897] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:12:32.897] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:12:32.897] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:12:32.897] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:12:32.897] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:12:32.897] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:12:34.897] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:12:34.897] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:12:34.897] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:12:34.897] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:12:34.937] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:12:34.937] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:12:20.527] (Detector                         :  17) @Stop
[2018-01-12 19:12:46.807] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:12:46.807] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:12:46.807] (MainPre Routine                  :   0) @Run
[2018-01-12 19:12:46.807] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:12:52.787] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:12:52.787] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:12:52.787] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:12:53.427] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:12:53.427] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:12:53.437] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:12:55.167] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:12:55.167] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:12:55.167] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:12:55.327] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:12:55.377] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:12:55.397] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:12:55.647] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:12:55.647] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:12:55.647] (Initialize P1                    :   3) @Run
[2018-01-12 19:12:55.647] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:12:55.697] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:12:55.697] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:12:55.697] (Initialize P2                    :   4) @Run
[2018-01-12 19:12:55.697] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:12:55.877] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:56.107] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:56.227] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:12:56.277] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:56.277] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:56.327] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:12:56.377] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:56.377] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:56.567] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:12:56.617] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:56.617] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:56.667] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:12:56.717] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:56.717] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:56.767] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:12:56.817] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:56.817] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:56.867] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:12:56.917] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:56.917] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:56.967] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:12:57.017] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:57.017] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:57.067] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:12:57.117] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:57.117] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:57.187] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:12:57.237] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:57.237] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:57.427] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:12:57.477] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:57.477] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:57.527] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:12:57.577] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:57.577] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:57.627] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:12:57.677] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:57.677] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:57.727] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:12:57.777] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:57.777] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:57.827] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:12:57.877] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:57.877] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:57.927] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:12:57.977] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:57.977] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:58.047] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:12:58.097] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:58.097] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:58.287] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:12:58.337] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:58.337] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:58.387] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:12:58.437] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:12:58.437] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:12:58.487] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:12:58.537] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:12:58.537] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:12:58.537] (Initialize P1                    :   3) @Stop
[2018-01-12 19:12:58.587] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:12:58.637] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:12:58.637] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:12:58.637] (Initialize P2                    :   4) @Stop
[2018-01-12 19:12:58.897] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:12:59.097] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:12:59.117] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:12:59.117] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:12:59.117] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:12:59.117] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:12:59.117] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:12:59.117] (PreFillP1                        :   6) @Run
[2018-01-12 19:12:59.117] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:12:59.167] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:12:59.167] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:12:59.167] (PreFillP2                        :   7) @Run
[2018-01-12 19:12:59.167] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:12:59.267] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:59.537] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:12:59.587] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:12:59.587] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:12:59.897] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:12:59.947] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:12:59.947] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:00.197] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:00.247] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:00.247] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:00.397] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:00.447] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:00.447] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:00.617] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:00.667] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:00.667] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:00.957] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:01.007] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:01.007] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:01.257] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:01.307] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:13:01.307] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:01.357] (PreFillP1                        :   6) @Stop
[2018-01-12 19:13:01.457] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:01.507] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:13:01.507] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:01.677] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:01.727] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:13:01.727] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:01.917] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:01.967] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:13:01.967] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:02.117] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:02.167] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:13:02.167] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:02.267] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:02.317] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:13:02.317] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:02.467] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:02.517] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:13:02.517] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:02.727] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:02.777] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:13:02.777] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:13:02.777] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:13:02.817] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:13:02.827] (PreFillP2                        :   7) @Stop
[2018-01-12 19:13:02.867] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:13:02.867] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:13:02.867] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:13:02.887] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:02.937] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:13:02.957] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:13:03.207] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:13:03.207] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:03.207] (Flush Capillary                  :   9) @Run
[2018-01-12 19:13:03.207] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:13:03.257] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:13:03.257] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:13:03.257] (Flush Singulator                 :  10) @Run
[2018-01-12 19:13:03.257] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:13:03.357] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:03.607] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:03.657] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:03.657] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:03.807] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:03.857] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:03.857] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:04.027] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:04.077] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:04.077] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:04.367] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:04.417] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:04.417] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:04.667] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:04.717] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:04.717] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:04.867] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:04.917] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:04.917] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:05.087] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:05.137] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:05.137] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:05.427] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:05.477] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:13:05.477] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:05.527] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:13:05.627] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:13:05.727] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:05.777] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:13:05.777] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:13:05.777] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:13:05.817] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:13:05.837] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:13:05.837] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:13:05.837] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:13:05.877] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:05.927] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:13:06.037] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:13:06.287] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:13:06.287] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:06.287] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:13:06.287] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:13:06.337] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:13:06.337] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:13:06.337] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:13:06.337] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:13:06.437] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:06.707] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:06.757] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:06.757] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:07.067] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:07.117] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:07.117] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:07.367] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:07.417] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:07.417] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:07.567] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:07.617] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:07.617] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:07.787] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:07.837] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:07.837] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:07.887] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:13:08.127] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:08.177] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:13:08.177] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:08.227] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:13:08.327] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:08.377] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:13:08.377] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:13:08.377] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:13:08.387] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:13:08.387] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:13:08.387] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:13:08.387] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:13:08.387] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:13:08.387] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:13:08.387] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:08.387] (PreFillP1                        :   6) @Run
[2018-01-12 19:13:08.387] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:13:08.437] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:13:08.437] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:13:08.437] (PreFillP2                        :   7) @Run
[2018-01-12 19:13:08.437] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:13:08.537] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:08.827] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:08.877] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:08.877] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:09.167] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:09.217] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:09.217] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:09.367] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:09.417] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:09.417] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:09.567] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:09.617] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:09.617] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:09.787] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:09.837] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:09.837] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:10.127] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:10.177] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:10.177] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:10.427] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:10.477] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:10.477] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:10.627] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:10.677] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:13:10.677] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:10.727] (PreFillP1                        :   6) @Stop
[2018-01-12 19:13:10.847] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:10.897] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:13:10.897] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:11.187] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:11.237] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:13:11.237] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:11.387] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:11.437] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:13:11.437] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:11.537] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:11.587] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:13:11.587] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:11.737] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:11.787] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:13:11.787] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:11.997] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:13:12.047] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:13:12.047] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:13:12.047] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:13:12.087] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:13:12.097] (PreFillP2                        :   7) @Stop
[2018-01-12 19:13:12.137] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:13:12.137] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:13:12.137] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:13:12.157] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:12.207] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:13:12.227] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:13:12.477] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:13:12.477] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:12.477] (Flush Capillary                  :   9) @Run
[2018-01-12 19:13:12.477] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:13:12.527] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:13:12.527] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:13:12.527] (Flush Singulator                 :  10) @Run
[2018-01-12 19:13:12.527] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:13:12.627] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:12.877] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:12.927] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:12.927] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:13.077] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:13.127] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:13.127] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:13.297] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:13.347] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:13.347] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:13.637] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:13.687] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:13.687] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:13.937] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:13.987] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:13.987] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:14.137] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:14.187] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:14.187] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:14.357] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:14.407] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:14.407] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:14.697] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:14.747] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:13:14.747] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:14.797] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:13:14.897] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:13:14.997] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:13:15.047] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:13:15.047] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:13:15.047] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:13:15.087] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:13:15.107] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:13:15.107] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:13:15.107] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:13:15.147] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:15.197] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:13:15.307] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:13:15.557] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:13:15.557] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:15.557] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:13:15.557] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:13:15.607] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:13:15.607] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:13:15.607] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:13:15.607] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:13:15.707] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:15.977] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:16.027] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:16.027] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:16.337] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:16.387] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:16.387] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:16.637] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:16.687] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:16.687] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:16.837] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:16.887] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:16.887] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:17.057] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:17.107] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:13:17.107] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:17.157] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:13:17.397] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:17.447] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:13:17.447] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:17.497] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:13:17.597] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:13:17.647] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:13:17.647] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:13:17.647] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:13:17.657] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:13:17.657] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:13:17.657] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:13:17.657] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:13:17.657] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:13:17.657] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:13:17.657] (Prefill before Flush             :  14) @Run
[2018-01-12 19:13:17.657] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:13:17.657] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:13:17.657] (PreFillP1                        :  15) @Run
[2018-01-12 19:13:17.657] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:13:17.707] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:13:17.707] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:13:17.707] (PreFillP2                        :  16) @Run
[2018-01-12 19:13:17.707] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:13:17.807] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:18.097] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:13:18.147] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:18.147] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:18.337] (PreFillP1                        :  15) @Stop
[2018-01-12 19:13:18.437] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:13:18.487] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:13:18.487] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:18.537] (PreFillP2                        :  16) @Stop
[2018-01-12 19:13:18.637] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:13:18.687] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:13:18.687] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:13:18.687] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:13:18.707] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:13:18.727] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:13:18.727] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:12:20.527] (Detector                         :   2) @Stop
[2018-01-12 19:13:18.887] ** STARTING E05 MAIN ROUTINE **
[2018-01-12 19:13:18.887] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:13:18.887] (Main Well                        :   0) @Run
[2018-01-12 19:13:18.887] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:13:18.887] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:13:18.887] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:13:18.887] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:13:18.887] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:13:18.887] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:13:18.887] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:13:18.887] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:13:18.887] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:13:18.887] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:13:19.417] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:13:19.417] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:13:19.437] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:13:19.437] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:13:19.577] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:13:19.577] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:13:19.577] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:13:19.577] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:13:19.577] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:13:19.577] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:13:19.577] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:13:19.577] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:13:19.577] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:13:19.597] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:13:19.647] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:13:19.667] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:13:19.917] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:13:19.917] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:13:19.917] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:13:19.917] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:13:19.967] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:13:19.967] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:13:19.967] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:13:19.967] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:13:20.067] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:20.337] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:13:20.387] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:13:20.387] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:20.697] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:13:20.747] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:13:20.747] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:20.997] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:13:21.047] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:13:21.047] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:21.197] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:13:21.247] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:13:21.247] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:21.297] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:13:21.417] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:13:21.467] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:13:21.467] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:21.517] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:13:21.757] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:13:21.807] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:13:21.807] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:13:21.807] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:13:21.807] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:13:21.807] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:13:21.867] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:13:21.917] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:13:21.977] (Main Well                        :   0) Move to Well 53 with z-offset of 2540 um (Wait)
[2018-01-12 19:13:24.877] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:25.117] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:13:25.167] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:13:25.167] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:25.267] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:13:25.317] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:13:25.317] (Main Well                        :   0) Stop Pump
[2018-01-12 19:13:25.357] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:13:25.417] (Main Well                        :   0) Move to Well 53 with z-offset of 310 um (Wait)
[2018-01-12 19:13:35.707] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:35.947] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:13:35.997] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:13:35.997] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:13:35.997] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:13:35.997] (Pickup Sample                    :  21) @Run
[2018-01-12 19:13:35.997] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:13:40.667] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:13:43.287] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:13:43.367] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:13:43.567] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:43.667] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:43.717] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:43.717] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:43.817] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:43.867] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:43.867] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:43.967] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:44.017] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:44.017] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:44.127] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:44.177] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:44.177] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:44.367] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:44.417] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:44.417] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:44.517] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:44.567] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:44.567] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:44.667] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:44.717] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:44.717] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:44.817] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:44.867] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:44.867] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:45.077] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:45.127] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:45.127] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:45.227] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:45.277] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:45.277] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:45.377] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:45.427] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:45.427] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:45.527] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:45.577] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:45.577] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:45.787] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:45.837] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:45.837] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:45.937] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:45.987] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:45.987] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:46.087] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:46.137] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:46.137] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:46.237] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:46.287] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:46.287] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:46.497] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:46.547] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:46.547] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:46.657] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:46.707] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:46.707] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:46.807] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:46.857] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:46.857] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:46.957] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:47.007] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:47.007] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:47.217] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:47.267] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:47.267] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:47.367] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:47.417] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:47.417] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:47.517] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:47.567] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:47.567] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:47.667] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:47.717] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:47.717] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:47.927] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:47.977] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:47.977] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:48.077] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:48.127] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:48.127] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:48.227] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:48.277] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:48.277] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:48.377] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:48.427] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:48.427] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:48.637] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:48.687] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:48.687] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:48.787] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:48.837] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:48.837] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:48.937] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:48.987] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:48.987] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:49.087] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:49.137] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:49.137] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:49.347] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:49.397] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:49.397] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:49.497] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:49.547] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:49.547] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:49.647] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:49.697] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:49.697] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:49.797] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:49.847] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:49.847] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:50.057] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:50.107] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:50.107] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:50.207] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:50.257] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:50.257] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:50.357] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:50.407] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:50.407] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:50.507] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:50.557] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:50.557] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:50.767] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:50.817] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:50.817] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:50.917] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:50.967] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:50.967] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:51.067] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:51.117] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:51.117] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:51.217] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:51.267] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:51.267] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:51.477] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:51.527] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:51.527] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:51.627] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:51.677] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:51.677] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:51.777] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:51.827] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:51.827] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:51.927] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:51.977] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:51.977] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:52.187] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:52.237] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:52.237] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:52.337] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:52.387] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:52.387] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:52.487] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:52.537] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:52.537] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:52.637] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:52.687] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:13:52.687] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:13:52.897] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:52.947] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:13:52.947] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:13:53.047] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:13:53.097] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:13:53.097] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:13:53.097] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:13:53.397] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:13:53.477] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:13:53.727] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:13:53.747] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:13:53.797] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:13:53.797] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:13:53.797] (Singulate Sample                 :  22) @Run
[2018-01-12 19:13:53.797] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:13:53.797] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:13:53.797] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:13:53.857] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:13:53.907] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:13:53.967] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:13:54.067] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_E05_RAW.qlb"
[2018-01-12 19:13:54.167] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:13:54.177] (Detector                         :   2) @Run
[2018-01-12 19:14:34.067] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:14:35.087] (Detector                         :   2) @Stop
[2018-01-12 19:14:35.267] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:14:35.267] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:14:35.367] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:14:35.417] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:14:35.417] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:35.517] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:14:35.567] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:14:35.567] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:14:35.567] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:14:35.797] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:14:35.797] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:14:35.797] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:14:35.797] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:14:35.797] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:14:35.797] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:14:35.797] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:35.797] (PreFillP1                        :  24) @Run
[2018-01-12 19:14:35.797] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:14:35.847] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:14:35.847] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:14:35.847] (PreFillP2                        :  25) @Run
[2018-01-12 19:14:35.847] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:14:35.947] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:36.217] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:36.267] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:14:36.267] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:36.427] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:36.477] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:14:36.477] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:36.787] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:36.837] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:14:36.837] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:37.087] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:37.137] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:14:37.137] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:37.287] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:37.337] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:14:37.337] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:37.507] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:37.557] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:14:37.557] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:37.847] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:37.897] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:14:37.897] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:38.147] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:38.197] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:14:38.197] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:38.347] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:38.397] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:14:38.397] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:38.567] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:38.617] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:14:38.617] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:38.907] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:38.957] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:14:38.957] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:14:39.007] (PreFillP1                        :  24) @Stop
[2018-01-12 19:14:39.207] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:39.257] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:14:39.257] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:14:39.357] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:39.407] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:14:39.407] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:14:39.577] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:14:39.627] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:14:39.627] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:14:39.627] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:14:39.647] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:14:39.647] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:14:39.647] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:14:39.737] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:14:39.787] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:14:39.837] (PreFillP2                        :  25) @Stop
[2018-01-12 19:14:39.857] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:14:40.107] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:14:40.107] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:14:40.107] (Flush Capillary                  :  27) @Run
[2018-01-12 19:14:40.107] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:14:40.157] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:14:40.157] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:14:40.157] (Flush Singulator                 :  28) @Run
[2018-01-12 19:14:40.157] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:14:40.257] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:40.547] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:14:40.597] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:14:40.597] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:40.887] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:14:40.937] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:14:40.937] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:41.087] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:14:41.137] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:14:41.137] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:41.287] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:14:41.337] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:14:41.337] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:41.507] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:14:41.557] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:14:41.557] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:14:41.607] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:14:41.847] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:14:41.897] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:14:41.897] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:14:41.897] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:14:41.897] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:14:41.947] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:14:41.967] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:14:41.967] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:14:41.967] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:14:41.987] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:14:42.037] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:14:42.057] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:14:42.307] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:14:42.307] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:14:42.307] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:14:42.307] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:14:42.357] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:14:42.357] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:14:42.357] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:14:42.357] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:14:42.457] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:42.627] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:14:42.677] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:14:42.677] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:42.937] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:14:42.987] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:14:42.987] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:43.297] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:14:43.347] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:14:43.347] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:14:43.397] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:14:43.497] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:14:43.597] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:14:43.647] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:14:43.647] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:14:43.647] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:14:43.667] (Main Well                        :   0) Stop Pump
[2018-01-12 19:14:43.707] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:14:43.707] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:14:43.707] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:14:43.747] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:14:43.797] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:14:43.907] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:14:44.157] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:14:44.157] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:14:44.157] (Flush Capillary                  :  33) @Run
[2018-01-12 19:14:44.157] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:14:44.207] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:14:44.207] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:14:44.207] (Flush Singulator                 :  34) @Run
[2018-01-12 19:14:44.207] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:14:44.307] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:44.577] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:14:44.627] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:14:44.627] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:44.937] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:14:44.987] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:14:44.987] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:14:45.037] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:14:45.137] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:14:45.237] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:14:45.287] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:14:45.287] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:14:45.287] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:14:45.307] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:14:45.327] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:14:45.327] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:14:45.327] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:14:45.347] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:14:45.397] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:14:45.527] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:14:45.777] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:14:45.777] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:14:45.777] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:14:45.777] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:14:45.827] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:14:45.827] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:14:45.827] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:14:45.827] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:14:45.927] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:46.197] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:14:46.247] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:14:46.247] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:14:46.557] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:14:46.607] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:14:46.607] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:14:46.657] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:14:46.757] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:14:46.857] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:14:46.907] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:14:46.907] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:14:46.907] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:14:46.927] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:14:46.947] (Main Well                        :   0) Stop routine
[2018-01-12 19:14:46.947] (Main Well                        :   0) @Stop
[2018-01-12 19:14:47.427] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:14:47.427] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:14:47.427] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:14:47.427] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:14:47.427] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:14:47.427] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:14:49.427] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:14:49.427] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:14:49.427] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:14:49.427] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:14:49.467] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:14:49.467] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:14:35.087] (Detector                         :  17) @Stop
[2018-01-12 19:14:53.927] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:14:53.927] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:14:53.927] (MainPre Routine                  :   0) @Run
[2018-01-12 19:14:53.927] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:15:00.027] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:15:00.027] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:15:00.027] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:15:00.667] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:15:00.667] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:15:00.677] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:15:02.407] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:15:02.407] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:15:02.407] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:15:02.567] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:15:02.617] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:15:02.637] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:15:02.887] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:15:02.887] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:15:02.887] (Initialize P1                    :   3) @Run
[2018-01-12 19:15:02.887] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:15:02.937] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:15:02.937] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:15:02.937] (Initialize P2                    :   4) @Run
[2018-01-12 19:15:02.937] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:15:03.117] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:03.347] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:03.467] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:15:03.517] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:03.517] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:03.567] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:15:03.617] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:03.617] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:03.807] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:15:03.857] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:03.857] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:03.907] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:15:03.957] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:03.957] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:04.007] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:15:04.057] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:04.057] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:04.107] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:15:04.157] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:04.157] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:04.207] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:15:04.257] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:04.257] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:04.307] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:15:04.357] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:04.357] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:04.427] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:15:04.477] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:04.477] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:04.667] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:15:04.717] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:04.717] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:04.767] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:15:04.817] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:04.817] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:04.867] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:15:04.917] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:04.917] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:04.967] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:15:05.017] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:05.017] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:05.067] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:15:05.117] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:05.117] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:05.167] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:15:05.217] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:05.217] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:05.287] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:15:05.337] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:05.337] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:05.527] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:15:05.577] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:05.577] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:05.627] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:15:05.677] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:15:05.677] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:05.727] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:15:05.777] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:15:05.777] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:15:05.777] (Initialize P1                    :   3) @Stop
[2018-01-12 19:15:05.827] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:15:05.877] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:15:05.877] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:15:05.877] (Initialize P2                    :   4) @Stop
[2018-01-12 19:15:06.137] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:15:06.337] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:15:06.357] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:15:06.357] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:15:06.357] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:15:06.357] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:15:06.357] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:06.357] (PreFillP1                        :   6) @Run
[2018-01-12 19:15:06.357] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:15:06.407] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:15:06.407] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:15:06.407] (PreFillP2                        :   7) @Run
[2018-01-12 19:15:06.407] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:15:06.507] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:06.777] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:06.827] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:06.827] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:07.137] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:07.187] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:07.187] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:07.437] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:07.487] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:07.487] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:07.637] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:07.687] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:07.687] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:07.857] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:07.907] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:07.907] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:08.197] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:08.247] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:08.247] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:08.497] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:08.547] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:15:08.547] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:08.597] (PreFillP1                        :   6) @Stop
[2018-01-12 19:15:08.697] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:08.747] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:15:08.747] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:08.917] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:08.967] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:15:08.967] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:09.157] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:09.207] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:15:09.207] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:09.357] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:09.407] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:15:09.407] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:09.507] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:09.557] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:15:09.557] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:09.707] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:09.757] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:15:09.757] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:09.967] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:10.017] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:15:10.017] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:15:10.017] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:15:10.057] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:15:10.067] (PreFillP2                        :   7) @Stop
[2018-01-12 19:15:10.107] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:15:10.107] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:15:10.107] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:15:10.127] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:10.177] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:15:10.197] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:15:10.447] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:15:10.447] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:10.447] (Flush Capillary                  :   9) @Run
[2018-01-12 19:15:10.447] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:15:10.497] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:15:10.497] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:15:10.497] (Flush Singulator                 :  10) @Run
[2018-01-12 19:15:10.497] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:15:10.597] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:10.857] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:10.907] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:10.907] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:11.057] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:11.107] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:11.107] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:11.277] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:11.327] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:11.327] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:11.617] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:11.667] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:11.667] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:11.917] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:11.967] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:11.967] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:12.117] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:12.167] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:12.167] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:12.337] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:12.387] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:12.387] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:12.677] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:12.727] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:15:12.727] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:12.777] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:15:12.877] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:15:12.977] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:13.027] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:15:13.027] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:15:13.027] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:15:13.057] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:15:13.077] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:15:13.077] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:15:13.077] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:15:13.117] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:13.167] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:15:13.277] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:15:13.527] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:15:13.527] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:13.527] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:15:13.527] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:15:13.577] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:15:13.577] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:15:13.577] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:15:13.577] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:15:13.677] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:13.947] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:13.997] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:13.997] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:14.307] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:14.357] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:14.357] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:14.607] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:14.657] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:14.657] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:14.807] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:14.857] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:14.857] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:15.027] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:15.077] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:15.077] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:15.127] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:15:15.367] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:15.417] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:15:15.417] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:15.467] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:15:15.567] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:15.617] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:15:15.617] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:15:15.617] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:15:15.627] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:15:15.627] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:15:15.627] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:15:15.627] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:15:15.627] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:15:15.627] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:15:15.627] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:15.627] (PreFillP1                        :   6) @Run
[2018-01-12 19:15:15.627] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:15:15.677] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:15:15.677] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:15:15.677] (PreFillP2                        :   7) @Run
[2018-01-12 19:15:15.677] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:15:15.777] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:16.067] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:16.117] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:16.117] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:16.407] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:16.457] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:16.457] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:16.607] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:16.657] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:16.657] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:16.807] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:16.857] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:16.857] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:17.027] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:17.077] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:17.077] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:17.367] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:17.417] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:17.417] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:17.667] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:17.717] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:17.717] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:17.867] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:17.917] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:15:17.917] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:17.967] (PreFillP1                        :   6) @Stop
[2018-01-12 19:15:18.087] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:18.137] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:15:18.137] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:18.427] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:18.477] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:15:18.477] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:18.627] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:18.677] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:15:18.677] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:18.777] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:18.827] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:15:18.827] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:18.977] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:19.027] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:15:19.027] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:19.237] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:15:19.287] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:15:19.287] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:15:19.287] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:15:19.327] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:15:19.337] (PreFillP2                        :   7) @Stop
[2018-01-12 19:15:19.377] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:15:19.377] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:15:19.377] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:15:19.397] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:19.447] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:15:19.467] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:15:19.717] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:15:19.717] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:19.717] (Flush Capillary                  :   9) @Run
[2018-01-12 19:15:19.717] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:15:19.767] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:15:19.767] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:15:19.767] (Flush Singulator                 :  10) @Run
[2018-01-12 19:15:19.767] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:15:19.867] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:20.117] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:20.167] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:20.167] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:20.317] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:20.367] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:20.367] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:20.537] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:20.587] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:20.587] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:20.877] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:20.927] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:20.927] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:21.177] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:21.227] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:21.227] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:21.377] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:21.427] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:21.427] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:21.597] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:21.647] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:21.647] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:21.937] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:21.987] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:15:21.987] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:22.037] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:15:22.137] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:15:22.237] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:15:22.287] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:15:22.287] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:15:22.287] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:15:22.337] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:15:22.357] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:15:22.357] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:15:22.357] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:15:22.397] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:22.447] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:15:22.557] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:15:22.807] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:15:22.807] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:22.807] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:15:22.807] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:15:22.857] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:15:22.857] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:15:22.857] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:15:22.857] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:15:22.957] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:23.227] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:23.277] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:23.277] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:23.587] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:23.637] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:23.637] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:23.887] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:23.937] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:23.937] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:24.087] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:24.137] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:24.137] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:24.307] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:24.357] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:15:24.357] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:24.407] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:15:24.647] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:24.697] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:15:24.697] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:24.747] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:15:24.847] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:15:24.897] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:15:24.897] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:15:24.897] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:15:24.907] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:15:24.907] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:15:24.907] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:15:24.907] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:15:24.907] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:15:24.907] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:15:24.907] (Prefill before Flush             :  14) @Run
[2018-01-12 19:15:24.907] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:15:24.907] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:15:24.907] (PreFillP1                        :  15) @Run
[2018-01-12 19:15:24.907] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:15:24.957] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:15:24.957] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:15:24.957] (PreFillP2                        :  16) @Run
[2018-01-12 19:15:24.957] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:15:25.057] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:25.347] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:15:25.397] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:25.397] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:25.587] (PreFillP1                        :  15) @Stop
[2018-01-12 19:15:25.687] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:15:25.737] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:15:25.737] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:25.787] (PreFillP2                        :  16) @Stop
[2018-01-12 19:15:25.887] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:15:25.937] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:15:25.937] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:15:25.937] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:15:25.957] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:15:25.977] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:15:25.977] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:14:35.087] (Detector                         :   2) @Stop
[2018-01-12 19:15:26.497] ** STARTING F05 MAIN ROUTINE **
[2018-01-12 19:15:26.497] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:15:26.497] (Main Well                        :   0) @Run
[2018-01-12 19:15:26.497] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:15:26.497] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:15:26.497] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:15:26.497] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:15:26.497] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:15:26.497] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:15:26.497] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:15:26.497] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:15:26.497] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:15:26.497] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:15:27.007] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:15:27.007] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:15:27.047] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:15:27.167] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:15:27.167] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:15:27.167] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:15:27.167] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:15:27.167] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:15:27.167] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:15:27.167] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:15:27.167] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:15:27.167] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:15:27.167] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:15:27.187] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:15:27.237] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:15:27.257] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:15:27.507] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:15:27.507] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:15:27.507] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:15:27.507] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:15:27.557] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:15:27.557] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:15:27.557] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:15:27.557] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:15:27.657] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:27.927] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:15:27.977] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:15:27.977] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:28.287] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:15:28.337] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:15:28.337] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:28.587] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:15:28.637] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:15:28.637] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:28.787] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:15:28.837] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:15:28.837] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:28.887] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:15:29.007] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:15:29.057] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:15:29.057] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:29.107] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:15:29.347] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:15:29.397] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:15:29.397] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:15:29.397] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:15:29.397] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:15:29.397] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:15:29.457] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:15:29.507] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:15:29.567] (Main Well                        :   0) Move to Well 65 with z-offset of 2540 um (Wait)
[2018-01-12 19:15:32.487] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:15:32.727] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:15:32.777] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:15:32.777] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:32.877] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:15:32.927] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:15:32.927] (Main Well                        :   0) Stop Pump
[2018-01-12 19:15:32.967] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:15:33.027] (Main Well                        :   0) Move to Well 65 with z-offset of 310 um (Wait)
[2018-01-12 19:15:43.587] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:43.827] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:15:43.877] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:15:43.877] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:15:43.877] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:15:43.877] (Pickup Sample                    :  21) @Run
[2018-01-12 19:15:43.877] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:15:48.547] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:15:51.167] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:15:51.247] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:15:51.447] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:51.547] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:51.597] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:51.597] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:51.697] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:51.747] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:51.747] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:51.847] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:51.897] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:51.897] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:52.007] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:52.057] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:52.057] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:52.247] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:52.297] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:52.297] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:52.397] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:52.447] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:52.447] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:52.547] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:52.597] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:52.597] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:52.697] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:52.747] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:52.747] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:52.957] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:53.007] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:53.007] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:53.107] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:53.157] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:53.157] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:53.257] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:53.307] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:53.307] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:53.407] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:53.457] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:53.457] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:53.667] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:53.717] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:53.717] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:53.817] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:53.867] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:53.867] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:53.967] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:54.017] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:54.017] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:54.117] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:54.167] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:54.167] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:54.377] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:54.427] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:54.427] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:54.527] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:54.577] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:54.577] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:54.677] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:54.727] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:54.727] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:54.827] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:54.877] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:54.877] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:55.087] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:55.137] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:55.137] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:55.237] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:55.287] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:55.287] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:55.387] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:55.437] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:55.437] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:55.537] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:55.587] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:55.587] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:55.797] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:55.847] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:55.847] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:55.947] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:55.997] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:55.997] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:56.097] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:56.147] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:56.147] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:56.247] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:56.297] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:56.297] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:56.507] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:56.557] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:56.557] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:56.657] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:56.707] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:56.707] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:56.807] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:56.857] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:56.857] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:56.957] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:57.007] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:57.007] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:57.217] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:57.267] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:57.267] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:57.367] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:57.417] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:57.417] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:57.517] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:57.567] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:57.567] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:57.667] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:57.717] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:57.717] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:57.927] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:57.977] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:57.977] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:58.077] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:58.127] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:58.127] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:58.227] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:58.277] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:58.277] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:58.377] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:58.427] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:58.427] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:58.637] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:58.687] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:58.687] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:58.787] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:58.837] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:58.837] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:58.937] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:58.987] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:58.987] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:59.087] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:59.137] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:59.137] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:59.347] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:59.397] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:59.397] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:59.497] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:59.547] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:59.547] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:59.647] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:59.697] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:59.697] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:15:59.797] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:15:59.847] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:15:59.847] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:16:00.057] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:16:00.107] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:00.107] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:16:00.207] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:16:00.257] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:00.257] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:16:00.357] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:16:00.407] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:00.407] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:16:00.507] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:16:00.557] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:00.557] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:16:00.777] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:16:00.827] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:16:00.827] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:00.927] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:16:00.977] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:16:00.977] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:16:00.977] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:16:01.277] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:16:01.357] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:16:01.607] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:16:01.627] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:16:01.677] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:16:01.677] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:16:01.677] (Singulate Sample                 :  22) @Run
[2018-01-12 19:16:01.677] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:16:01.677] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:16:01.677] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:16:01.737] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:16:01.787] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:16:01.847] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:16:01.947] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_F05_RAW.qlb"
[2018-01-12 19:16:02.047] (Detector                         :   2) @Run
[2018-01-12 19:16:02.047] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:16:41.948] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:16:42.888] (Detector                         :   2) @Stop
[2018-01-12 19:16:42.948] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:16:42.948] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:16:43.048] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:16:43.098] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:16:43.098] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:43.198] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:16:43.248] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:16:43.248] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:16:43.248] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:16:43.478] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:16:43.478] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:16:43.478] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:16:43.478] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:16:43.478] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:16:43.478] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:16:43.478] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:43.478] (PreFillP1                        :  24) @Run
[2018-01-12 19:16:43.478] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:16:43.528] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:16:43.528] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:16:43.528] (PreFillP2                        :  25) @Run
[2018-01-12 19:16:43.528] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:16:43.628] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:43.828] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:43.878] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:43.878] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:44.128] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:44.178] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:44.178] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:44.488] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:44.538] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:44.538] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:44.788] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:44.838] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:44.838] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:44.988] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:45.038] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:45.038] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:45.208] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:45.258] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:45.258] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:45.548] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:45.598] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:45.598] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:45.848] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:45.898] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:45.898] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:46.048] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:46.098] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:46.098] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:46.268] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:46.318] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:16:46.318] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:46.608] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:46.658] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:16:46.658] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:16:46.808] (PreFillP1                        :  24) @Stop
[2018-01-12 19:16:46.908] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:46.958] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:16:46.958] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:16:47.108] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:47.158] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:16:47.158] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:16:47.368] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:16:47.418] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:16:47.418] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:16:47.418] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:16:47.428] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:16:47.428] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:16:47.428] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:16:47.468] (PreFillP2                        :  25) @Stop
[2018-01-12 19:16:47.488] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:16:47.538] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:16:47.558] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:16:47.808] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:16:47.808] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:16:47.808] (Flush Capillary                  :  27) @Run
[2018-01-12 19:16:47.808] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:16:47.858] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:16:47.858] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:16:47.858] (Flush Singulator                 :  28) @Run
[2018-01-12 19:16:47.858] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:16:47.958] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:48.148] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:16:48.198] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:16:48.198] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:48.448] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:16:48.498] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:16:48.498] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:48.808] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:16:48.858] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:16:48.858] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:49.108] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:16:49.158] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:16:49.158] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:49.308] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:16:49.358] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:16:49.358] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:16:49.408] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:16:49.528] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:16:49.578] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:16:49.578] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:16:49.578] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:16:49.628] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:16:49.628] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:16:49.788] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:16:49.788] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:16:49.788] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:16:49.808] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:16:49.858] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:16:49.878] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:16:50.128] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:16:50.128] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:16:50.128] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:16:50.128] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:16:50.178] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:16:50.178] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:16:50.178] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:16:50.178] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:16:50.278] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:50.568] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:16:50.618] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:16:50.618] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:50.908] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:16:50.958] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:16:50.958] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:16:51.008] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:16:51.108] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:16:51.158] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:16:51.158] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:16:51.158] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:16:51.188] (Main Well                        :   0) Stop Pump
[2018-01-12 19:16:51.208] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:16:51.248] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:16:51.248] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:16:51.248] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:16:51.288] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:16:51.338] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:16:51.448] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:16:51.698] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:16:51.698] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:16:51.698] (Flush Capillary                  :  33) @Run
[2018-01-12 19:16:51.698] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:16:51.748] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:16:51.748] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:16:51.748] (Flush Singulator                 :  34) @Run
[2018-01-12 19:16:51.748] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:16:51.848] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:52.118] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:16:52.168] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:16:52.168] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:52.478] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:16:52.528] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:16:52.528] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:16:52.578] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:16:52.688] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:16:52.788] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:16:52.838] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:16:52.838] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:16:52.838] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:16:52.848] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:16:52.868] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:16:52.868] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:16:52.868] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:16:52.888] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:16:52.938] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:16:53.068] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:16:53.318] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:16:53.318] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:16:53.318] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:16:53.318] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:16:53.368] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:16:53.368] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:16:53.368] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:16:53.368] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:16:53.468] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:53.738] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:16:53.788] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:16:53.788] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:16:54.098] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:16:54.148] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:16:54.148] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:16:54.198] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:16:54.298] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:16:54.398] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:16:54.448] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:16:54.448] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:16:54.448] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:16:54.468] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:16:54.488] (Main Well                        :   0) Stop routine
[2018-01-12 19:16:54.488] (Main Well                        :   0) @Stop
[2018-01-12 19:16:54.538] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:16:54.538] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:16:54.538] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:16:54.538] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:16:54.658] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:16:54.658] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:16:56.538] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:16:56.538] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:16:56.538] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:16:56.538] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:16:56.678] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:16:56.678] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:16:42.888] (Detector                         :  17) @Stop
[2018-01-12 19:17:00.988] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:17:00.988] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:17:00.988] (MainPre Routine                  :   0) @Run
[2018-01-12 19:17:00.988] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:17:07.018] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:17:07.018] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:17:07.018] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:17:07.658] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:17:07.658] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:17:07.668] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:17:09.398] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:17:09.398] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:17:09.398] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:17:09.558] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:17:09.608] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:17:09.628] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:17:09.878] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:17:09.878] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:17:09.878] (Initialize P1                    :   3) @Run
[2018-01-12 19:17:09.878] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:17:09.928] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:17:09.928] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:17:09.928] (Initialize P2                    :   4) @Run
[2018-01-12 19:17:09.928] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:17:10.108] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:10.338] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:10.458] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:17:10.508] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:10.508] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:10.558] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:17:10.608] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:10.608] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:10.798] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:17:10.848] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:10.848] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:10.898] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:17:10.948] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:10.948] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:10.998] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:17:11.048] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:11.048] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:11.098] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:17:11.148] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:11.148] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:11.198] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:17:11.248] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:11.248] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:11.298] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:17:11.348] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:11.348] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:11.418] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:17:11.468] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:11.468] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:11.658] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:17:11.708] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:11.708] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:11.758] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:17:11.808] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:11.808] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:11.858] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:17:11.908] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:11.908] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:11.958] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:17:12.008] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:12.008] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:12.058] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:17:12.108] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:12.108] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:12.158] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:17:12.208] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:12.208] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:12.278] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:17:12.328] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:12.328] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:12.518] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:17:12.568] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:12.568] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:12.618] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:17:12.668] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:17:12.668] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:12.718] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:17:12.768] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:17:12.768] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:17:12.768] (Initialize P1                    :   3) @Stop
[2018-01-12 19:17:12.818] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:17:12.868] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:17:12.868] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:17:12.868] (Initialize P2                    :   4) @Stop
[2018-01-12 19:17:13.128] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:17:13.328] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:17:13.348] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:17:13.348] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:17:13.348] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:17:13.348] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:17:13.348] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:13.348] (PreFillP1                        :   6) @Run
[2018-01-12 19:17:13.348] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:17:13.398] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:17:13.398] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:17:13.398] (PreFillP2                        :   7) @Run
[2018-01-12 19:17:13.398] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:17:13.498] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:13.768] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:13.818] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:13.818] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:14.128] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:14.178] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:14.178] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:14.428] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:14.478] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:14.478] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:14.628] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:14.678] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:14.678] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:14.848] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:14.898] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:14.898] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:15.188] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:15.238] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:15.238] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:15.488] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:15.538] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:17:15.538] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:15.588] (PreFillP1                        :   6) @Stop
[2018-01-12 19:17:15.688] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:15.738] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:17:15.738] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:15.908] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:15.958] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:17:15.958] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:16.148] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:16.198] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:17:16.198] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:16.348] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:16.398] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:17:16.398] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:16.498] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:16.550] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:17:16.550] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:16.700] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:16.750] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:17:16.750] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:16.960] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:17.010] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:17:17.010] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:17:17.010] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:17:17.050] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:17:17.060] (PreFillP2                        :   7) @Stop
[2018-01-12 19:17:17.100] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:17:17.100] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:17:17.100] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:17:17.120] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:17.170] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:17:17.190] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:17:17.440] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:17:17.440] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:17.440] (Flush Capillary                  :   9) @Run
[2018-01-12 19:17:17.440] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:17:17.490] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:17:17.490] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:17:17.490] (Flush Singulator                 :  10) @Run
[2018-01-12 19:17:17.490] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:17:17.590] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:17.840] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:17.890] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:17.890] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:18.040] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:18.090] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:18.090] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:18.260] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:18.310] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:18.310] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:18.600] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:18.650] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:18.650] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:18.900] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:18.950] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:18.950] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:19.100] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:19.150] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:19.150] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:19.320] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:19.370] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:19.370] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:19.660] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:19.710] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:17:19.710] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:19.760] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:17:19.860] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:17:19.960] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:20.010] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:17:20.010] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:17:20.010] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:17:20.050] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:17:20.070] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:17:20.070] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:17:20.070] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:17:20.110] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:20.160] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:17:20.270] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:17:20.520] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:17:20.520] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:20.520] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:17:20.520] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:17:20.570] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:17:20.570] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:17:20.570] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:17:20.570] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:17:20.670] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:20.940] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:20.990] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:20.990] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:21.300] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:21.350] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:21.350] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:21.600] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:21.650] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:21.650] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:21.800] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:21.850] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:21.850] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:22.020] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:22.070] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:22.070] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:22.120] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:17:22.360] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:22.410] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:17:22.410] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:22.460] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:17:22.560] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:22.610] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:17:22.610] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:17:22.610] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:17:22.620] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:17:22.620] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:17:22.620] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:17:22.620] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:17:22.620] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:17:22.620] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:17:22.620] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:22.620] (PreFillP1                        :   6) @Run
[2018-01-12 19:17:22.620] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:17:22.670] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:17:22.670] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:17:22.670] (PreFillP2                        :   7) @Run
[2018-01-12 19:17:22.670] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:17:22.770] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:23.060] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:23.110] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:23.110] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:23.400] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:23.450] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:23.450] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:23.600] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:23.650] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:23.650] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:23.800] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:23.850] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:23.850] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:24.020] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:24.070] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:24.070] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:24.360] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:24.410] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:24.410] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:24.660] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:24.710] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:24.710] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:24.860] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:24.910] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:17:24.910] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:24.960] (PreFillP1                        :   6) @Stop
[2018-01-12 19:17:25.080] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:25.130] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:17:25.130] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:25.420] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:25.470] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:17:25.470] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:25.620] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:25.670] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:17:25.670] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:25.770] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:25.820] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:17:25.820] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:25.970] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:26.020] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:17:26.020] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:26.230] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:17:26.280] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:17:26.280] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:17:26.280] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:17:26.320] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:17:26.330] (PreFillP2                        :   7) @Stop
[2018-01-12 19:17:26.370] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:17:26.370] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:17:26.370] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:17:26.390] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:26.440] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:17:26.460] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:17:26.710] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:17:26.710] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:26.710] (Flush Capillary                  :   9) @Run
[2018-01-12 19:17:26.710] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:17:26.760] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:17:26.760] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:17:26.760] (Flush Singulator                 :  10) @Run
[2018-01-12 19:17:26.760] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:17:26.860] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:27.110] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:27.160] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:27.160] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:27.320] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:27.370] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:27.370] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:27.540] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:27.590] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:27.590] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:27.880] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:27.930] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:27.930] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:28.180] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:28.230] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:28.230] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:28.380] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:28.430] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:28.430] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:28.600] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:28.650] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:28.650] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:28.940] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:28.990] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:17:28.990] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:29.040] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:17:29.140] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:17:29.240] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:17:29.290] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:17:29.290] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:17:29.290] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:17:29.320] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:17:29.340] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:17:29.340] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:17:29.340] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:17:29.380] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:29.430] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:17:29.540] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:17:29.790] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:17:29.790] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:29.790] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:17:29.790] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:17:29.840] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:17:29.840] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:17:29.840] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:17:29.840] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:17:29.940] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:30.210] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:30.260] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:30.260] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:30.570] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:30.620] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:30.620] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:30.870] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:30.920] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:30.920] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:31.070] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:31.120] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:31.120] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:31.290] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:31.340] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:17:31.340] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:31.390] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:17:31.630] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:31.680] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:17:31.680] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:31.730] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:17:31.830] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:17:31.880] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:17:31.880] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:17:31.880] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:17:31.890] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:17:31.890] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:17:31.890] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:17:31.890] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:17:31.890] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:17:31.890] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:17:31.890] (Prefill before Flush             :  14) @Run
[2018-01-12 19:17:31.890] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:17:31.890] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:17:31.890] (PreFillP1                        :  15) @Run
[2018-01-12 19:17:31.890] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:17:31.940] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:17:31.940] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:17:31.940] (PreFillP2                        :  16) @Run
[2018-01-12 19:17:31.940] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:17:32.040] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:32.330] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:17:32.380] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:32.380] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:32.570] (PreFillP1                        :  15) @Stop
[2018-01-12 19:17:32.670] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:17:32.720] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:17:32.720] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:32.770] (PreFillP2                        :  16) @Stop
[2018-01-12 19:17:32.870] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:17:32.920] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:17:32.920] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:17:32.920] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:17:32.940] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:17:32.960] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:17:32.960] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:16:42.888] (Detector                         :   2) @Stop
[2018-01-12 19:17:33.070] ** STARTING G05 MAIN ROUTINE **
[2018-01-12 19:17:33.070] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:17:33.070] (Main Well                        :   0) @Run
[2018-01-12 19:17:33.070] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:17:33.070] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:17:33.070] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:17:33.070] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:17:33.070] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:17:33.070] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:17:33.070] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:17:33.070] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:17:33.070] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:17:33.070] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:17:33.650] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:17:33.650] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:17:33.670] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:17:33.670] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:17:33.820] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:17:33.820] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:17:33.820] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:17:33.820] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:17:33.820] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:17:33.820] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:17:33.820] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:17:33.820] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:17:33.820] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:17:33.840] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:17:33.890] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:17:33.910] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:17:34.160] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:17:34.160] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:17:34.160] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:17:34.160] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:17:34.210] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:17:34.210] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:17:34.210] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:17:34.210] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:17:34.310] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:34.580] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:17:34.630] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:17:34.630] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:34.940] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:17:34.990] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:17:34.990] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:35.240] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:17:35.290] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:17:35.290] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:35.440] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:17:35.490] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:17:35.490] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:35.540] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:17:35.660] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:17:35.710] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:17:35.710] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:35.760] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:17:36.000] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:17:36.050] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:17:36.050] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:17:36.050] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:17:36.050] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:17:36.050] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:17:36.110] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:17:36.160] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:17:36.220] (Main Well                        :   0) Move to Well 77 with z-offset of 2540 um (Wait)
[2018-01-12 19:17:39.320] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:17:39.560] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:17:39.610] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:17:39.610] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:39.710] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:17:39.760] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:17:39.760] (Main Well                        :   0) Stop Pump
[2018-01-12 19:17:39.800] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:17:39.860] (Main Well                        :   0) Move to Well 77 with z-offset of 310 um (Wait)
[2018-01-12 19:17:50.540] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:50.780] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:17:50.830] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:17:50.830] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:17:50.830] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:17:50.830] (Pickup Sample                    :  21) @Run
[2018-01-12 19:17:50.830] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:17:55.500] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:17:58.300] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:17:58.380] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:17:58.580] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:58.680] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:17:58.730] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:58.730] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:58.830] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:17:58.880] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:58.880] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:58.980] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:17:59.030] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:59.030] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:59.140] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:17:59.190] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:59.190] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:59.380] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:17:59.430] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:59.430] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:59.530] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:17:59.580] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:59.580] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:59.680] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:17:59.730] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:59.730] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:17:59.830] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:17:59.880] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:17:59.880] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:00.090] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:00.140] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:00.140] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:00.240] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:00.290] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:00.290] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:00.390] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:00.440] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:00.440] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:00.540] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:00.590] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:00.590] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:00.800] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:00.850] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:00.850] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:00.950] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:01.000] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:01.000] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:01.100] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:01.150] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:01.150] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:01.250] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:01.300] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:01.300] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:01.510] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:01.560] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:01.560] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:01.660] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:01.710] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:01.710] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:01.810] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:01.860] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:01.860] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:01.960] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:02.010] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:02.010] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:02.220] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:02.270] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:02.270] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:02.370] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:02.420] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:02.420] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:02.520] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:02.570] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:02.570] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:02.670] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:02.720] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:02.720] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:02.930] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:02.980] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:02.980] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:03.080] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:03.130] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:03.130] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:03.230] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:03.280] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:03.280] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:03.380] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:03.430] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:03.430] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:03.640] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:03.690] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:03.690] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:03.790] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:03.840] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:03.840] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:03.940] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:03.990] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:03.990] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:04.090] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:04.140] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:04.140] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:04.350] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:04.400] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:04.400] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:04.500] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:04.550] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:04.550] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:04.650] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:04.700] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:04.700] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:04.800] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:04.850] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:04.850] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:05.060] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:05.110] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:05.110] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:05.210] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:05.260] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:05.260] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:05.360] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:05.410] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:05.410] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:05.510] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:05.560] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:05.560] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:05.770] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:05.820] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:05.820] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:05.920] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:05.970] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:05.970] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:06.070] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:06.120] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:06.120] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:06.220] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:06.270] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:06.270] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:06.480] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:06.530] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:06.530] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:06.630] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:06.680] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:06.680] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:06.780] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:06.830] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:06.830] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:06.930] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:06.980] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:06.980] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:07.190] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:07.240] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:07.240] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:07.340] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:07.390] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:07.390] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:07.490] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:07.540] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:07.540] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:07.640] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:07.690] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:07.690] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:07.900] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:07.950] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:18:07.950] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:08.050] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:18:08.100] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:18:08.100] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:18:08.100] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:18:08.430] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:18:08.480] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:18:08.730] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:18:08.750] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:18:08.800] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:18:08.800] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:18:08.800] (Singulate Sample                 :  22) @Run
[2018-01-12 19:18:08.800] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:18:08.800] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:18:08.800] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:18:08.860] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:18:08.910] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:18:08.970] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:18:09.070] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_G05_RAW.qlb"
[2018-01-12 19:18:09.180] (Detector                         :   2) @Run
[2018-01-12 19:18:09.180] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:18:49.081] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:18:50.151] (Detector                         :   2) @Stop
[2018-01-12 19:18:50.281] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:18:50.281] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:50.381] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:18:50.431] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:18:50.431] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:50.531] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:18:50.581] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:18:50.581] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:18:50.581] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:18:50.801] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:18:50.801] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:18:50.801] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:18:50.801] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:18:50.801] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:18:50.801] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:18:50.801] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:50.801] (PreFillP1                        :  24) @Run
[2018-01-12 19:18:50.801] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:18:50.851] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:18:50.851] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:18:50.851] (PreFillP2                        :  25) @Run
[2018-01-12 19:18:50.851] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:18:50.951] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:51.241] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:51.291] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:51.291] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:51.451] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:51.501] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:51.501] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:51.811] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:51.861] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:51.861] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:52.111] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:52.161] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:52.161] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:52.311] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:52.361] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:52.361] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:52.531] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:52.581] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:52.581] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:52.881] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:52.931] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:52.931] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:53.181] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:53.231] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:53.231] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:53.381] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:53.431] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:53.431] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:53.601] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:53.651] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:18:53.651] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:53.941] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:53.991] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:18:53.991] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:54.041] (PreFillP1                        :  24) @Stop
[2018-01-12 19:18:54.241] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:54.291] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:18:54.291] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:54.391] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:54.441] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:18:54.441] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:54.611] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:18:54.661] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:18:54.661] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:18:54.661] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:18:54.701] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:18:54.701] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:18:54.701] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:18:54.851] (PreFillP2                        :  25) @Stop
[2018-01-12 19:18:54.871] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:18:54.921] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:18:54.941] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:18:55.191] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:18:55.191] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:18:55.191] (Flush Capillary                  :  27) @Run
[2018-01-12 19:18:55.191] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:18:55.241] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:18:55.241] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:18:55.241] (Flush Singulator                 :  28) @Run
[2018-01-12 19:18:55.241] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:18:55.341] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:55.781] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:18:55.831] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:18:55.831] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:56.081] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:18:56.131] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:18:56.131] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:56.281] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:18:56.331] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:18:56.331] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:56.641] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:18:56.691] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:18:56.691] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:56.741] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:18:56.841] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:18:56.941] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:18:56.991] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:18:56.991] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:18:56.991] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:18:57.001] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:18:57.021] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:18:57.021] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:18:57.021] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:18:57.041] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:18:57.091] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:18:57.221] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:18:57.471] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:18:57.471] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:18:57.471] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:18:57.471] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:18:57.521] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:18:57.521] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:18:57.521] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:18:57.521] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:18:57.621] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:57.891] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:18:57.941] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:18:57.941] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:58.251] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:18:58.301] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:18:58.301] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:18:58.351] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:18:58.451] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:18:58.551] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:18:58.601] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:18:58.601] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:18:58.601] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:18:58.621] (Main Well                        :   0) Stop Pump
[2018-01-12 19:18:58.661] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:18:58.661] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:18:58.661] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:18:58.701] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:18:58.751] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:18:58.861] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:18:59.111] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:18:59.111] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:18:59.111] (Flush Capillary                  :  33) @Run
[2018-01-12 19:18:59.111] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:18:59.161] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:18:59.161] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:18:59.161] (Flush Singulator                 :  34) @Run
[2018-01-12 19:18:59.161] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:18:59.261] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:59.541] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:18:59.591] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:18:59.591] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:18:59.901] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:18:59.951] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:18:59.951] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:00.001] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:19:00.101] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:19:00.201] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:19:00.251] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:19:00.251] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:19:00.251] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:19:00.261] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:19:00.281] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:19:00.281] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:19:00.281] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:19:00.301] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:19:00.351] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:19:00.481] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:19:00.731] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:19:00.731] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:19:00.731] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:19:00.731] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:19:00.781] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:19:00.781] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:19:00.781] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:19:00.781] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:19:00.881] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:01.161] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:19:01.211] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:01.211] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:01.521] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:19:01.571] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:19:01.571] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:01.621] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:19:01.721] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:19:01.821] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:19:01.871] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:19:01.871] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:19:01.871] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:19:01.881] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:19:01.901] (Main Well                        :   0) Stop routine
[2018-01-12 19:19:01.901] (Main Well                        :   0) @Stop
[2018-01-12 19:19:02.371] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:19:02.371] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:19:02.371] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:19:02.371] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:19:02.371] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:19:02.371] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:19:04.371] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:19:04.371] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:19:04.371] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:19:04.371] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:19:04.411] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:19:04.411] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:18:50.151] (Detector                         :  17) @Stop
[2018-01-12 19:19:08.231] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:19:08.231] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:19:08.231] (MainPre Routine                  :   0) @Run
[2018-01-12 19:19:08.231] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:19:14.331] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:19:14.331] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:19:14.331] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:19:14.971] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:19:14.971] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:19:14.981] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:19:16.711] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:19:16.711] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:19:16.711] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:19:16.871] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:19:16.921] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:19:16.941] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:19:17.191] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:19:17.191] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:19:17.191] (Initialize P1                    :   3) @Run
[2018-01-12 19:19:17.191] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:19:17.241] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:19:17.241] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:19:17.241] (Initialize P2                    :   4) @Run
[2018-01-12 19:19:17.241] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:19:17.421] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:17.651] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:17.771] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:19:17.821] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:17.821] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:17.871] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:19:17.921] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:17.921] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:18.111] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:19:18.161] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:18.161] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:18.211] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:19:18.261] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:18.261] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:18.311] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:19:18.361] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:18.361] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:18.411] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:19:18.461] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:18.461] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:18.511] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:19:18.561] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:18.561] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:18.611] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:19:18.661] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:18.661] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:18.731] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:19:18.781] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:18.781] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:18.971] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:19:19.021] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:19.021] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:19.071] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:19:19.121] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:19.121] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:19.171] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:19:19.221] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:19.221] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:19.271] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:19:19.321] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:19.321] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:19.371] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:19:19.421] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:19.421] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:19.471] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:19:19.521] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:19.521] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:19.591] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:19:19.641] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:19.641] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:19.841] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:19:19.891] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:19.891] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:19.941] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:19:19.991] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:19:19.991] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:20.041] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:19:20.091] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:19:20.091] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:19:20.091] (Initialize P1                    :   3) @Stop
[2018-01-12 19:19:20.141] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:19:20.191] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:19:20.191] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:19:20.191] (Initialize P2                    :   4) @Stop
[2018-01-12 19:19:20.441] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:19:20.641] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:19:20.661] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:19:20.661] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:19:20.661] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:19:20.661] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:19:20.661] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:20.661] (PreFillP1                        :   6) @Run
[2018-01-12 19:19:20.661] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:19:20.711] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:19:20.711] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:19:20.711] (PreFillP2                        :   7) @Run
[2018-01-12 19:19:20.711] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:19:20.811] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:21.081] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:21.131] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:21.131] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:21.441] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:21.491] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:21.491] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:21.741] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:21.791] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:21.791] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:21.941] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:21.991] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:21.991] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:22.161] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:22.211] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:22.211] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:22.501] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:22.551] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:22.551] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:22.801] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:22.851] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:19:22.851] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:22.901] (PreFillP1                        :   6) @Stop
[2018-01-12 19:19:23.001] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:23.051] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:19:23.051] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:23.251] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:23.301] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:19:23.301] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:23.491] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:23.541] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:19:23.541] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:23.691] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:23.741] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:19:23.741] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:23.841] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:23.891] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:19:23.891] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:24.041] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:24.091] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:19:24.091] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:24.301] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:24.351] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:19:24.351] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:19:24.351] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:19:24.361] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:19:24.401] (PreFillP2                        :   7) @Stop
[2018-01-12 19:19:24.441] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:19:24.441] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:19:24.441] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:19:24.461] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:24.511] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:19:24.531] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:19:24.781] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:19:24.781] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:24.781] (Flush Capillary                  :   9) @Run
[2018-01-12 19:19:24.781] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:19:24.831] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:19:24.831] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:19:24.831] (Flush Singulator                 :  10) @Run
[2018-01-12 19:19:24.831] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:19:24.931] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:25.181] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:25.231] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:25.231] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:25.381] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:25.431] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:25.431] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:25.601] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:25.651] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:25.651] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:25.941] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:25.991] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:25.991] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:26.241] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:26.291] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:26.291] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:26.441] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:26.491] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:26.491] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:26.661] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:26.711] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:26.711] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:27.001] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:27.051] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:19:27.051] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:27.101] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:19:27.201] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:19:27.301] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:27.351] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:19:27.351] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:19:27.351] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:19:27.391] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:19:27.411] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:19:27.411] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:19:27.411] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:19:27.451] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:27.501] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:19:27.611] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:19:27.861] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:19:27.861] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:27.861] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:19:27.861] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:19:27.911] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:19:27.911] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:19:27.911] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:19:27.911] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:19:28.011] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:28.281] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:28.331] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:28.331] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:28.641] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:28.691] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:28.691] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:28.941] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:28.991] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:28.991] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:29.141] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:29.191] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:29.191] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:29.361] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:29.411] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:29.411] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:29.461] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:19:29.701] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:29.751] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:19:29.751] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:29.801] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:19:29.901] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:29.951] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:19:29.951] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:19:29.951] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:19:29.961] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:19:29.961] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:19:29.961] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:19:29.961] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:19:29.961] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:19:29.961] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:19:29.961] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:29.961] (PreFillP1                        :   6) @Run
[2018-01-12 19:19:29.961] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:19:30.011] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:19:30.011] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:19:30.011] (PreFillP2                        :   7) @Run
[2018-01-12 19:19:30.011] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:19:30.111] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:30.401] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:30.451] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:30.451] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:30.741] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:30.791] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:30.791] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:30.941] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:30.991] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:30.991] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:31.141] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:31.191] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:31.191] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:31.361] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:31.411] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:31.411] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:31.701] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:31.751] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:31.751] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:32.001] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:32.051] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:32.051] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:32.201] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:32.251] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:19:32.251] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:32.301] (PreFillP1                        :   6) @Stop
[2018-01-12 19:19:32.421] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:32.471] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:19:32.471] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:32.761] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:32.811] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:19:32.811] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:32.961] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:33.011] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:19:33.011] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:33.111] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:33.161] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:19:33.161] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:33.311] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:33.361] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:19:33.361] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:33.571] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:19:33.621] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:19:33.621] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:19:33.621] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:19:33.661] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:19:33.671] (PreFillP2                        :   7) @Stop
[2018-01-12 19:19:33.711] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:19:33.711] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:19:33.711] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:19:33.731] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:33.781] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:19:33.801] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:19:34.051] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:19:34.051] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:34.051] (Flush Capillary                  :   9) @Run
[2018-01-12 19:19:34.051] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:19:34.101] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:19:34.101] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:19:34.101] (Flush Singulator                 :  10) @Run
[2018-01-12 19:19:34.101] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:19:34.201] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:34.451] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:34.501] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:34.501] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:34.651] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:34.701] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:34.701] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:34.871] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:34.921] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:34.921] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:35.211] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:35.261] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:35.261] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:35.511] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:35.561] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:35.561] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:35.711] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:35.761] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:35.761] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:35.931] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:35.981] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:35.981] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:36.271] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:36.321] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:19:36.321] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:36.371] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:19:36.471] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:19:36.571] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:19:36.621] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:19:36.621] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:19:36.621] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:19:36.661] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:19:36.681] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:19:36.681] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:19:36.681] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:19:36.721] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:36.771] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:19:36.881] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:19:37.131] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:19:37.131] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:37.131] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:19:37.131] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:19:37.181] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:19:37.181] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:19:37.181] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:19:37.181] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:19:37.281] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:37.551] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:37.601] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:37.601] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:37.911] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:37.961] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:37.961] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:38.211] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:38.261] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:38.261] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:38.411] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:38.461] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:38.461] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:38.631] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:38.681] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:19:38.681] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:38.731] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:19:38.971] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:39.021] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:19:39.021] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:39.071] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:19:39.171] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:19:39.221] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:19:39.221] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:19:39.221] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:19:39.231] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:19:39.231] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:19:39.231] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:19:39.231] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:19:39.231] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:19:39.231] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:19:39.231] (Prefill before Flush             :  14) @Run
[2018-01-12 19:19:39.231] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:19:39.231] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:19:39.231] (PreFillP1                        :  15) @Run
[2018-01-12 19:19:39.231] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:19:39.281] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:19:39.281] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:19:39.281] (PreFillP2                        :  16) @Run
[2018-01-12 19:19:39.281] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:19:39.381] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:39.671] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:19:39.721] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:19:39.721] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:39.911] (PreFillP1                        :  15) @Stop
[2018-01-12 19:19:40.011] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:19:40.061] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:19:40.061] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:40.111] (PreFillP2                        :  16) @Stop
[2018-01-12 19:19:40.211] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:19:40.261] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:19:40.261] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:19:40.261] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:19:40.281] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:19:40.301] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:19:40.301] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:18:50.151] (Detector                         :   2) @Stop
[2018-01-12 19:19:40.811] ** STARTING H05 MAIN ROUTINE **
[2018-01-12 19:19:40.811] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:19:40.811] (Main Well                        :   0) @Run
[2018-01-12 19:19:40.811] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:19:40.811] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:19:40.811] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:19:40.811] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:19:40.811] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:19:40.811] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:19:40.811] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:19:40.811] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:19:40.811] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:19:40.811] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:19:41.311] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:19:41.311] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:19:41.361] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:19:41.471] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:19:41.471] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:19:41.471] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:19:41.471] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:19:41.471] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:19:41.471] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:19:41.471] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:19:41.471] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:19:41.471] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:19:41.471] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:19:41.491] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:19:41.541] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:19:41.561] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:19:41.811] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:19:41.811] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:19:41.811] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:19:41.811] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:19:41.861] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:19:41.861] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:19:41.861] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:19:41.861] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:19:41.961] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:42.231] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:19:42.281] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:19:42.281] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:42.591] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:19:42.641] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:19:42.641] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:42.891] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:19:42.941] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:19:42.941] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:43.091] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:19:43.141] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:19:43.141] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:43.191] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:19:43.311] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:19:43.361] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:19:43.361] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:43.411] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:19:43.651] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:19:43.701] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:19:43.701] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:19:43.701] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:19:43.701] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:19:43.701] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:19:43.761] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:19:43.811] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:19:43.871] (Main Well                        :   0) Move to Well 89 with z-offset of 2540 um (Wait)
[2018-01-12 19:19:47.051] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:19:47.291] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:19:47.341] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:19:47.341] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:47.441] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:19:47.491] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:19:47.491] (Main Well                        :   0) Stop Pump
[2018-01-12 19:19:47.531] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:19:47.591] (Main Well                        :   0) Move to Well 89 with z-offset of 310 um (Wait)
[2018-01-12 19:19:58.411] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:19:58.651] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:19:58.701] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:19:58.701] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:19:58.701] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:19:58.701] (Pickup Sample                    :  21) @Run
[2018-01-12 19:19:58.701] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:20:03.371] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:20:06.171] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:20:06.251] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:20:06.451] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:06.551] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:06.601] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:06.601] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:06.701] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:06.751] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:06.751] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:06.851] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:06.901] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:06.901] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:07.011] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:07.061] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:07.061] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:07.251] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:07.301] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:07.301] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:07.401] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:07.451] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:07.451] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:07.551] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:07.601] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:07.601] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:07.701] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:07.751] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:07.751] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:07.961] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:08.011] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:08.011] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:08.111] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:08.161] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:08.161] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:08.261] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:08.311] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:08.311] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:08.411] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:08.461] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:08.461] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:08.671] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:08.721] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:08.721] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:08.821] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:08.871] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:08.871] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:08.971] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:09.021] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:09.021] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:09.121] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:09.171] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:09.171] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:09.381] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:09.431] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:09.431] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:09.531] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:09.581] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:09.581] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:09.681] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:09.731] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:09.731] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:09.831] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:09.881] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:09.881] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:10.091] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:10.141] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:10.141] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:10.241] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:10.291] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:10.291] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:10.391] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:10.441] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:10.441] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:10.541] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:10.591] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:10.591] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:10.801] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:10.851] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:10.851] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:10.951] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:11.001] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:11.001] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:11.101] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:11.151] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:11.151] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:11.251] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:11.301] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:11.301] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:11.511] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:11.561] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:11.561] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:11.661] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:11.711] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:11.711] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:11.811] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:11.861] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:11.861] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:11.961] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:12.011] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:12.011] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:12.221] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:12.271] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:12.271] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:12.371] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:12.421] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:12.421] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:12.521] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:12.571] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:12.571] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:12.671] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:12.721] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:12.721] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:12.931] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:12.981] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:12.981] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:13.081] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:13.131] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:13.131] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:13.231] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:13.281] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:13.281] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:13.381] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:13.431] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:13.431] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:13.641] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:13.691] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:13.691] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:13.801] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:13.851] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:13.851] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:13.951] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:14.001] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:14.001] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:14.101] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:14.151] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:14.151] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:14.361] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:14.411] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:14.411] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:14.511] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:14.561] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:14.561] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:14.661] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:14.711] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:14.711] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:14.811] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:14.861] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:14.861] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:15.071] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:15.121] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:15.121] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:15.221] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:15.271] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:15.271] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:15.371] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:15.421] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:15.421] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:15.521] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:15.571] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:15.571] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:15.781] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:15.831] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:20:15.831] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:20:15.931] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:20:15.981] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:20:15.981] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:20:15.981] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:20:16.301] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:20:16.361] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:20:16.611] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:20:16.631] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:20:16.681] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:20:16.681] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:20:16.681] (Singulate Sample                 :  22) @Run
[2018-01-12 19:20:16.681] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:20:16.681] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:20:16.681] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:20:16.741] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:20:16.791] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:20:16.851] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:20:16.951] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_H05_RAW.qlb"
[2018-01-12 19:20:17.051] (Detector                         :   2) @Run
[2018-01-12 19:20:17.051] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:20:56.953] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:20:57.923] (Detector                         :   2) @Stop
[2018-01-12 19:20:57.953] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:20:57.953] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:20:58.103] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:20:58.153] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:20:58.153] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:20:58.253] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:20:58.303] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:20:58.303] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:20:58.303] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:20:58.683] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:20:58.683] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:20:58.683] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:20:58.683] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:20:58.683] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:20:58.683] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:20:58.683] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:20:58.683] (PreFillP1                        :  24) @Run
[2018-01-12 19:20:58.683] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:20:58.733] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:20:58.733] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:20:58.733] (PreFillP2                        :  25) @Run
[2018-01-12 19:20:58.733] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:20:58.833] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:20:59.103] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:20:59.153] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:59.153] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:20:59.313] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:20:59.363] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:59.363] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:20:59.693] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:20:59.743] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:20:59.743] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:20:59.993] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:21:00.043] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:00.043] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:00.193] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:21:00.243] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:00.243] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:00.413] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:21:00.463] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:00.463] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:00.753] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:21:00.803] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:00.803] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:01.053] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:21:01.103] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:01.103] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:01.253] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:21:01.303] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:01.303] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:01.473] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:21:01.523] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:01.523] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:01.813] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:21:01.863] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:21:01.863] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:01.913] (PreFillP1                        :  24) @Stop
[2018-01-12 19:21:02.113] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:21:02.163] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:21:02.163] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:02.263] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:21:02.313] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:21:02.313] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:02.483] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:21:02.533] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:21:02.533] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:21:02.533] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:21:02.533] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:21:02.533] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:21:02.533] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:21:02.643] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:21:02.693] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:21:02.743] (PreFillP2                        :  25) @Stop
[2018-01-12 19:21:02.763] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:21:03.013] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:21:03.013] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:21:03.013] (Flush Capillary                  :  27) @Run
[2018-01-12 19:21:03.013] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:21:03.063] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:21:03.063] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:21:03.063] (Flush Singulator                 :  28) @Run
[2018-01-12 19:21:03.063] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:21:03.163] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:03.453] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:21:03.503] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:03.503] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:03.803] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:21:03.853] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:03.853] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:04.003] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:21:04.053] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:04.053] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:04.203] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:21:04.253] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:04.253] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:04.563] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:21:04.613] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:21:04.613] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:04.663] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:21:04.763] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:21:04.863] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:21:04.913] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:21:04.913] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:21:04.913] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:21:04.933] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:21:04.953] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:21:04.953] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:21:04.953] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:21:04.973] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:21:05.023] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:21:05.153] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:21:05.403] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:21:05.403] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:21:05.403] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:21:05.403] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:21:05.453] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:21:05.453] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:21:05.453] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:21:05.453] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:21:05.553] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:05.823] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:21:05.873] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:05.873] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:06.183] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:21:06.233] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:21:06.233] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:06.283] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:21:06.383] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:21:06.483] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:21:06.533] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:21:06.533] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:21:06.533] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:21:06.553] (Main Well                        :   0) Stop Pump
[2018-01-12 19:21:06.593] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:21:06.593] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:21:06.593] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:21:06.633] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:21:06.683] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:21:06.793] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:21:07.043] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:21:07.043] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:21:07.043] (Flush Capillary                  :  33) @Run
[2018-01-12 19:21:07.043] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:21:07.093] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:21:07.093] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:21:07.093] (Flush Singulator                 :  34) @Run
[2018-01-12 19:21:07.093] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:21:07.193] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:07.483] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:21:07.533] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:07.533] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:07.843] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:21:07.893] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:21:07.893] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:07.943] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:21:08.043] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:21:08.143] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:21:08.193] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:21:08.193] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:21:08.193] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:21:08.243] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:21:08.283] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:21:08.283] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:21:08.283] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:21:08.443] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:21:08.493] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:21:08.513] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:21:08.763] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:21:08.763] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:21:08.763] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:21:08.763] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:21:08.813] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:21:08.813] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:21:08.813] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:21:08.813] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:21:08.913] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:09.183] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:21:09.233] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:09.233] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:09.543] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:21:09.593] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:21:09.593] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:09.643] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:21:09.743] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:21:09.853] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:21:09.903] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:21:09.903] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:21:09.903] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:21:09.933] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:21:09.953] (Main Well                        :   0) Stop routine
[2018-01-12 19:21:09.953] (Main Well                        :   0) @Stop
[2018-01-12 19:21:10.103] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:21:10.103] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:21:10.113] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:21:10.113] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:21:10.133] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:21:10.133] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:21:12.103] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:21:12.103] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:21:12.103] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:21:12.103] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:21:12.143] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:21:12.143] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:20:57.923] (Detector                         :  17) @Stop
[2018-01-12 19:21:16.273] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:21:16.273] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:21:16.273] (MainPre Routine                  :   0) @Run
[2018-01-12 19:21:16.273] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:21:22.285] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:21:22.285] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:21:22.285] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:21:22.925] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:21:22.925] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:21:22.935] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:21:24.665] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:21:24.665] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:21:24.665] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:21:24.825] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:21:24.875] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:21:24.895] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:21:25.145] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:21:25.145] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:21:25.145] (Initialize P1                    :   3) @Run
[2018-01-12 19:21:25.145] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:21:25.195] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:21:25.195] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:21:25.195] (Initialize P2                    :   4) @Run
[2018-01-12 19:21:25.195] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:21:25.375] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:25.605] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:25.725] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:21:25.775] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:25.775] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:25.835] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:21:25.885] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:25.885] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:26.075] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:21:26.125] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:26.125] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:26.175] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:21:26.225] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:26.225] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:26.275] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:21:26.325] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:26.325] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:26.375] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:21:26.425] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:26.425] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:26.475] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:21:26.525] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:26.525] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:26.575] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:21:26.625] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:26.625] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:26.695] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:21:26.745] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:26.745] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:26.935] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:21:26.985] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:26.985] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:27.035] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:21:27.085] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:27.085] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:27.135] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:21:27.185] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:27.185] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:27.235] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:21:27.285] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:27.285] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:27.335] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:21:27.385] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:27.385] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:27.435] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:21:27.485] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:27.485] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:27.555] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:21:27.605] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:27.605] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:27.795] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:21:27.845] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:27.845] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:27.895] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:21:27.945] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:21:27.945] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:27.995] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:21:28.045] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:21:28.045] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:21:28.045] (Initialize P1                    :   3) @Stop
[2018-01-12 19:21:28.095] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:21:28.145] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:21:28.145] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:21:28.145] (Initialize P2                    :   4) @Stop
[2018-01-12 19:21:28.395] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:21:28.595] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:21:28.615] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:21:28.615] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:21:28.615] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:21:28.615] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:21:28.615] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:28.615] (PreFillP1                        :   6) @Run
[2018-01-12 19:21:28.615] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:21:28.665] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:21:28.665] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:21:28.665] (PreFillP2                        :   7) @Run
[2018-01-12 19:21:28.665] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:21:28.765] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:29.035] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:29.085] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:29.085] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:29.395] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:29.445] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:29.445] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:29.695] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:29.745] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:29.745] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:29.895] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:29.945] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:29.945] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:30.115] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:30.165] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:30.165] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:30.455] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:30.505] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:30.505] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:30.755] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:30.805] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:21:30.805] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:30.855] (PreFillP1                        :   6) @Stop
[2018-01-12 19:21:30.955] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:31.005] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:21:31.005] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:31.195] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:31.245] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:21:31.245] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:31.435] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:31.485] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:21:31.485] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:31.635] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:31.685] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:21:31.685] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:31.785] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:31.835] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:21:31.835] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:31.985] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:32.035] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:21:32.035] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:32.245] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:32.295] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:21:32.295] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:21:32.295] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:21:32.315] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:21:32.345] (PreFillP2                        :   7) @Stop
[2018-01-12 19:21:32.385] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:21:32.385] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:21:32.385] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:21:32.405] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:32.455] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:21:32.475] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:21:32.725] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:21:32.725] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:32.725] (Flush Capillary                  :   9) @Run
[2018-01-12 19:21:32.725] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:21:32.775] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:21:32.775] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:21:32.775] (Flush Singulator                 :  10) @Run
[2018-01-12 19:21:32.775] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:21:32.875] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:33.125] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:33.175] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:33.175] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:33.325] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:33.375] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:33.375] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:33.545] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:33.595] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:33.595] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:33.885] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:33.935] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:33.935] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:34.185] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:34.235] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:34.235] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:34.385] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:34.435] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:34.435] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:34.605] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:34.655] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:34.655] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:34.945] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:34.995] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:21:34.995] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:35.045] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:21:35.145] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:21:35.245] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:35.295] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:21:35.295] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:21:35.295] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:21:35.335] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:21:35.355] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:21:35.355] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:21:35.355] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:21:35.395] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:35.445] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:21:35.555] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:21:35.805] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:21:35.805] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:35.805] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:21:35.805] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:21:35.855] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:21:35.855] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:21:35.855] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:21:35.855] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:21:35.955] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:36.225] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:36.275] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:36.275] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:36.585] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:36.635] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:36.635] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:36.885] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:36.935] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:36.935] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:37.085] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:37.135] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:37.135] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:37.315] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:37.365] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:37.365] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:37.415] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:21:37.655] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:37.705] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:21:37.705] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:37.755] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:21:37.855] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:37.905] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:21:37.905] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:21:37.905] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:21:37.905] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:21:37.905] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:21:37.905] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:21:37.905] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:37.905] (PreFillP1                        :   6) @Run
[2018-01-12 19:21:37.905] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:21:37.905] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:21:37.905] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:21:37.905] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:21:37.955] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:21:37.955] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:21:37.955] (PreFillP2                        :   7) @Run
[2018-01-12 19:21:37.955] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:21:38.055] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:38.345] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:38.395] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:38.395] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:38.685] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:38.735] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:38.735] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:38.885] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:38.935] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:38.935] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:39.085] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:39.135] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:39.135] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:39.305] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:39.355] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:39.355] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:39.645] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:39.695] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:39.695] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:39.945] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:39.995] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:21:39.995] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:40.145] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:40.195] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:21:40.195] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:40.245] (PreFillP1                        :   6) @Stop
[2018-01-12 19:21:40.365] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:40.415] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:21:40.415] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:40.705] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:40.755] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:21:40.755] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:40.905] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:40.955] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:21:40.955] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:41.055] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:41.105] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:21:41.105] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:41.255] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:41.305] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:21:41.305] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:41.515] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:21:41.565] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:21:41.565] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:21:41.565] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:21:41.605] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:21:41.615] (PreFillP2                        :   7) @Stop
[2018-01-12 19:21:41.655] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:21:41.655] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:21:41.655] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:21:41.675] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:41.725] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:21:41.745] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:21:41.995] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:21:41.995] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:41.995] (Flush Capillary                  :   9) @Run
[2018-01-12 19:21:41.995] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:21:42.045] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:21:42.045] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:21:42.045] (Flush Singulator                 :  10) @Run
[2018-01-12 19:21:42.045] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:21:42.145] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:42.395] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:42.445] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:42.445] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:42.595] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:42.645] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:42.645] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:42.815] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:42.865] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:42.865] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:43.155] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:43.205] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:43.205] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:43.455] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:43.505] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:43.505] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:43.655] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:43.705] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:43.705] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:44.015] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:44.065] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:44.065] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:44.115] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:21:44.215] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:21:44.315] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:44.365] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:21:44.365] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:44.465] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:21:44.515] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:21:44.515] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:21:44.515] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:21:44.555] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:21:44.645] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:21:44.645] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:21:44.645] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:21:44.665] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:44.715] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:21:44.735] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:21:44.985] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:21:44.985] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:44.985] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:21:44.985] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:21:45.035] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:21:45.035] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:21:45.035] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:21:45.035] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:21:45.135] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:45.425] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:45.475] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:45.475] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:45.765] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:45.815] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:45.815] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:45.965] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:46.015] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:46.015] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:46.165] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:46.215] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:21:46.215] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:46.525] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:46.575] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:21:46.575] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:46.625] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:21:46.725] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:21:46.825] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:21:46.875] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:21:46.875] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:21:46.875] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:21:46.895] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:21:46.895] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:21:46.895] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:21:46.895] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:21:46.895] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:21:46.895] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:21:46.895] (Prefill before Flush             :  14) @Run
[2018-01-12 19:21:46.895] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:21:46.895] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:21:46.895] (PreFillP1                        :  15) @Run
[2018-01-12 19:21:46.895] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:21:46.945] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:21:46.945] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:21:46.945] (PreFillP2                        :  16) @Run
[2018-01-12 19:21:46.945] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:21:47.045] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:47.475] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:21:47.525] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:21:47.525] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:47.575] (PreFillP1                        :  15) @Stop
[2018-01-12 19:21:47.675] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:21:47.725] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:21:47.725] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:21:47.725] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:21:47.745] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:21:47.775] (PreFillP2                        :  16) @Stop
[2018-01-12 19:21:47.795] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:21:47.795] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:20:57.923] (Detector                         :   2) @Stop
[2018-01-12 19:21:48.355] ** STARTING A06 MAIN ROUTINE **
[2018-01-12 19:21:48.355] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:21:48.355] (Main Well                        :   0) @Run
[2018-01-12 19:21:48.355] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:21:48.355] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:21:48.355] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:21:48.355] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:21:48.355] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:21:48.355] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:21:48.355] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:21:48.355] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:21:48.355] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:21:48.355] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:21:48.855] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:21:48.855] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:21:48.905] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:21:49.015] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:21:49.015] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:21:49.015] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:21:49.015] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:21:49.015] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:21:49.015] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:21:49.015] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:21:49.015] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:21:49.015] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:21:49.015] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:21:49.035] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:21:49.085] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:21:49.105] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:21:49.355] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:21:49.355] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:21:49.355] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:21:49.355] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:21:49.405] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:21:49.405] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:21:49.405] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:21:49.405] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:21:49.505] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:49.775] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:21:49.825] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:21:49.825] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:50.135] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:21:50.185] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:21:50.185] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:50.435] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:21:50.485] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:21:50.485] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:50.635] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:21:50.685] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:21:50.685] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:50.735] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:21:50.865] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:21:50.915] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:21:50.915] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:50.965] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:21:51.205] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:21:51.255] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:21:51.255] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:21:51.255] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:21:51.255] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:21:51.255] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:21:51.315] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:21:51.365] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:21:51.425] (Main Well                        :   0) Move to Well 6 with z-offset of 2540 um (Wait)
[2018-01-12 19:21:53.705] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:21:53.945] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:21:53.995] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:21:53.995] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:21:54.095] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:21:54.145] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:21:54.145] (Main Well                        :   0) Stop Pump
[2018-01-12 19:21:54.185] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:21:54.245] (Main Well                        :   0) Move to Well 6 with z-offset of 310 um (Wait)
[2018-01-12 19:22:03.905] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:04.145] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:22:04.195] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:22:04.195] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:22:04.195] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:22:04.195] (Pickup Sample                    :  21) @Run
[2018-01-12 19:22:04.195] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:22:08.865] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:22:10.945] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:22:11.025] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:22:11.225] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:11.325] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:11.375] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:11.375] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:11.475] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:11.525] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:11.525] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:11.625] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:11.675] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:11.675] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:11.785] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:11.835] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:11.835] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:12.025] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:12.075] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:12.075] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:12.175] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:12.225] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:12.225] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:12.325] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:12.375] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:12.375] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:12.475] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:12.525] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:12.525] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:12.735] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:12.785] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:12.785] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:12.885] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:12.935] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:12.935] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:13.035] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:13.085] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:13.085] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:13.185] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:13.235] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:13.235] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:13.445] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:13.495] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:13.495] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:13.595] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:13.645] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:13.645] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:13.745] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:13.795] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:13.795] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:13.895] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:13.945] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:13.945] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:14.155] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:14.205] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:14.205] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:14.305] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:14.355] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:14.355] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:14.455] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:14.505] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:14.505] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:14.605] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:14.655] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:14.655] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:14.865] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:14.915] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:14.915] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:15.015] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:15.065] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:15.065] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:15.165] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:15.215] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:15.215] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:15.315] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:15.365] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:15.365] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:15.575] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:15.625] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:15.625] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:15.725] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:15.775] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:15.775] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:15.875] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:15.925] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:15.925] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:16.025] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:16.075] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:16.075] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:16.285] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:16.335] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:16.335] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:16.435] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:16.485] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:16.485] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:16.585] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:16.635] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:16.635] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:16.735] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:16.785] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:16.785] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:16.995] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:17.045] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:17.045] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:17.145] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:17.195] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:17.195] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:17.295] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:17.345] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:17.345] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:17.445] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:17.495] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:17.495] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:17.705] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:17.755] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:17.755] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:17.857] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:17.907] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:17.907] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:18.007] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:18.057] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:18.057] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:18.157] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:18.207] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:18.207] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:18.417] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:18.467] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:18.467] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:18.567] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:18.617] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:18.617] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:18.717] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:18.767] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:18.767] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:18.877] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:18.927] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:18.927] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:19.137] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:19.187] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:19.187] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:19.287] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:19.337] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:19.337] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:19.437] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:19.487] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:19.487] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:19.587] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:19.637] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:19.637] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:19.847] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:19.897] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:19.897] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:19.997] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:20.047] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:20.047] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:20.147] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:20.197] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:20.197] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:20.297] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:20.347] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:22:20.347] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:22:20.557] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:20.607] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:22:20.607] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:22:20.707] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:22:20.757] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:22:20.757] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:22:20.757] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:22:20.997] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:22:21.137] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:22:21.387] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:22:21.407] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:22:21.457] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:22:21.457] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:22:21.457] (Singulate Sample                 :  22) @Run
[2018-01-12 19:22:21.457] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:22:21.457] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:22:21.457] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:22:21.517] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:22:21.567] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:22:21.627] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:22:21.727] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_A06_RAW.qlb"
[2018-01-12 19:22:21.847] (Detector                         :   2) @Run
[2018-01-12 19:22:21.847] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:23:01.747] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:23:02.817] (Detector                         :   2) @Stop
[2018-01-12 19:23:02.947] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:23:02.947] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:03.047] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:23:03.097] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:23:03.097] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:03.197] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:23:03.247] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:23:03.247] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:23:03.247] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:23:03.457] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:23:03.457] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:23:03.457] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:23:03.457] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:23:03.457] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:23:03.457] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:23:03.457] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:03.457] (PreFillP1                        :  24) @Run
[2018-01-12 19:23:03.457] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:23:03.507] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:23:03.507] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:23:03.507] (PreFillP2                        :  25) @Run
[2018-01-12 19:23:03.507] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:23:03.607] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:03.877] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:03.927] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:03.927] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:04.097] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:04.147] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:04.147] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:04.447] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:04.497] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:04.497] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:04.747] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:04.797] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:04.797] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:04.947] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:04.997] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:04.997] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:05.167] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:05.217] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:05.217] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:05.507] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:05.557] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:05.557] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:05.807] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:05.857] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:05.857] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:06.007] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:06.057] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:06.057] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:06.227] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:06.277] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:06.277] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:06.567] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:06.617] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:23:06.617] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:06.667] (PreFillP1                        :  24) @Stop
[2018-01-12 19:23:06.867] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:06.917] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:06.917] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:07.017] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:07.067] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:07.067] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:07.237] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:23:07.287] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:23:07.287] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:23:07.287] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:23:07.307] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:23:07.307] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:23:07.307] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:23:07.397] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:23:07.447] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:23:07.497] (PreFillP2                        :  25) @Stop
[2018-01-12 19:23:07.517] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:23:07.767] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:23:07.767] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:23:07.767] (Flush Capillary                  :  27) @Run
[2018-01-12 19:23:07.767] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:23:07.817] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:23:07.817] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:23:07.817] (Flush Singulator                 :  28) @Run
[2018-01-12 19:23:07.817] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:23:07.917] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:08.207] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:23:08.257] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:08.257] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:08.547] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:23:08.597] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:08.597] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:08.747] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:23:08.797] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:08.797] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:08.947] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:23:08.997] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:08.997] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:09.167] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:23:09.217] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:23:09.217] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:09.267] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:23:09.507] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:23:09.557] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:23:09.557] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:23:09.557] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:23:09.607] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:23:09.607] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:23:09.627] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:23:09.627] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:23:09.627] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:23:09.647] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:23:09.697] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:23:09.717] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:23:09.967] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:23:09.967] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:23:09.967] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:23:09.967] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:23:10.017] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:23:10.017] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:23:10.017] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:23:10.017] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:23:10.117] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:10.287] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:23:10.337] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:10.337] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:10.587] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:23:10.637] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:10.637] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:10.947] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:23:10.997] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:23:10.997] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:11.047] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:23:11.147] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:23:11.247] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:23:11.297] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:23:11.297] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:23:11.297] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:23:11.327] (Main Well                        :   0) Stop Pump
[2018-01-12 19:23:11.367] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:23:11.367] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:23:11.367] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:23:11.407] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:23:11.457] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:23:11.567] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:23:11.817] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:23:11.817] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:23:11.817] (Flush Capillary                  :  33) @Run
[2018-01-12 19:23:11.817] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:23:11.867] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:23:11.867] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:23:11.867] (Flush Singulator                 :  34) @Run
[2018-01-12 19:23:11.867] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:23:11.967] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:12.237] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:23:12.287] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:12.287] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:12.597] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:23:12.647] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:23:12.647] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:12.697] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:23:12.797] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:23:12.897] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:23:12.947] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:23:12.947] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:23:12.947] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:23:12.967] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:23:12.987] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:23:12.987] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:23:12.987] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:23:13.007] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:23:13.057] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:23:13.187] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:23:13.437] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:23:13.437] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:23:13.437] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:23:13.437] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:23:13.487] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:23:13.487] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:23:13.487] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:23:13.487] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:23:13.587] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:13.867] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:23:13.917] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:13.917] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:14.227] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:23:14.277] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:23:14.277] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:14.327] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:23:14.427] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:23:14.527] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:23:14.577] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:23:14.577] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:23:14.577] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:23:14.587] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:23:14.607] (Main Well                        :   0) Stop routine
[2018-01-12 19:23:14.607] (Main Well                        :   0) @Stop
[2018-01-12 19:23:14.907] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:23:14.907] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:23:14.917] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:23:14.917] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:23:14.917] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:23:14.917] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:23:16.907] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:23:16.907] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:23:16.907] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:23:16.907] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:23:16.947] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:23:16.947] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:23:02.817] (Detector                         :  17) @Stop
[2018-01-12 19:23:21.638] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:23:21.638] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:23:21.638] (MainPre Routine                  :   0) @Run
[2018-01-12 19:23:21.638] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:23:27.718] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:23:27.718] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:23:27.718] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:23:28.358] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:23:28.358] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:23:28.368] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:23:30.098] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:23:30.098] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:23:30.098] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:23:30.258] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:23:30.308] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:23:30.328] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:23:30.578] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:23:30.578] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:23:30.578] (Initialize P1                    :   3) @Run
[2018-01-12 19:23:30.578] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:23:30.628] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:23:30.628] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:23:30.628] (Initialize P2                    :   4) @Run
[2018-01-12 19:23:30.628] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:23:30.808] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:31.038] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:31.158] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:23:31.208] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:31.208] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:31.258] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:23:31.308] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:31.308] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:31.498] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:23:31.548] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:31.548] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:31.598] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:23:31.648] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:31.648] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:31.698] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:23:31.748] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:31.748] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:31.798] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:23:31.848] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:31.848] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:31.898] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:23:31.948] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:31.948] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:31.998] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:23:32.048] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:32.048] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:32.118] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:23:32.168] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:32.168] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:32.358] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:23:32.408] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:32.408] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:32.458] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:23:32.508] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:32.508] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:32.558] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:23:32.608] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:32.608] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:32.658] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:23:32.708] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:32.708] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:32.758] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:23:32.808] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:32.808] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:32.858] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:23:32.908] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:32.908] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:32.978] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:23:33.028] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:33.028] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:33.218] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:23:33.268] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:33.268] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:33.318] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:23:33.368] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:23:33.368] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:33.418] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:23:33.468] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:23:33.468] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:23:33.468] (Initialize P1                    :   3) @Stop
[2018-01-12 19:23:33.518] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:23:33.568] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:23:33.568] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:23:33.568] (Initialize P2                    :   4) @Stop
[2018-01-12 19:23:33.828] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:23:34.028] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:23:34.048] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:23:34.048] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:23:34.048] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:23:34.048] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:23:34.048] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:34.048] (PreFillP1                        :   6) @Run
[2018-01-12 19:23:34.048] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:23:34.098] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:23:34.098] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:23:34.098] (PreFillP2                        :   7) @Run
[2018-01-12 19:23:34.098] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:23:34.198] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:34.468] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:34.518] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:34.518] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:34.828] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:34.878] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:34.878] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:35.128] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:35.178] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:35.178] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:35.328] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:35.378] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:35.378] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:35.548] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:35.598] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:35.598] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:35.888] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:35.938] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:35.938] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:36.188] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:36.238] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:23:36.238] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:36.288] (PreFillP1                        :   6) @Stop
[2018-01-12 19:23:36.388] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:36.438] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:36.438] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:36.608] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:36.658] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:36.658] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:36.848] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:36.898] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:36.898] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:37.048] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:37.098] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:37.098] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:37.198] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:37.248] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:37.248] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:37.398] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:37.448] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:37.448] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:37.658] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:37.708] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:23:37.708] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:23:37.708] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:23:37.748] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:23:37.758] (PreFillP2                        :   7) @Stop
[2018-01-12 19:23:37.798] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:23:37.798] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:23:37.798] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:23:37.818] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:37.868] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:23:37.888] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:23:38.138] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:23:38.138] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:38.138] (Flush Capillary                  :   9) @Run
[2018-01-12 19:23:38.138] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:23:38.188] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:23:38.188] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:23:38.188] (Flush Singulator                 :  10) @Run
[2018-01-12 19:23:38.188] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:23:38.288] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:38.538] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:38.588] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:38.588] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:38.738] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:38.788] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:38.788] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:38.958] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:39.008] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:39.008] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:39.298] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:39.348] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:39.348] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:39.598] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:39.648] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:39.648] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:39.798] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:39.848] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:39.848] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:40.018] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:40.068] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:40.068] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:40.358] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:40.408] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:23:40.408] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:40.458] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:23:40.558] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:23:40.658] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:40.708] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:23:40.708] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:23:40.708] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:23:40.748] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:23:40.768] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:23:40.768] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:23:40.768] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:23:40.818] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:40.868] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:23:40.978] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:23:41.228] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:23:41.228] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:41.228] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:23:41.228] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:23:41.278] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:23:41.278] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:23:41.278] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:23:41.278] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:23:41.378] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:41.648] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:41.698] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:41.698] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:42.008] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:42.058] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:42.058] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:42.308] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:42.358] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:42.358] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:42.508] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:42.558] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:42.558] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:42.728] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:42.778] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:42.778] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:42.828] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:23:43.068] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:43.118] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:23:43.118] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:43.168] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:23:43.268] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:43.318] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:23:43.318] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:23:43.318] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:23:43.318] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:23:43.318] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:23:43.318] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:23:43.318] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:43.318] (PreFillP1                        :   6) @Run
[2018-01-12 19:23:43.318] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:23:43.318] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:23:43.318] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:23:43.318] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:23:43.368] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:23:43.368] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:23:43.368] (PreFillP2                        :   7) @Run
[2018-01-12 19:23:43.368] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:23:43.468] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:43.738] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:43.788] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:43.788] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:44.098] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:44.148] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:44.148] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:44.398] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:44.448] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:44.448] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:44.598] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:44.648] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:44.648] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:44.818] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:44.868] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:44.868] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:45.158] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:45.208] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:45.208] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:45.458] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:45.508] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:23:45.508] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:45.558] (PreFillP1                        :   6) @Stop
[2018-01-12 19:23:45.658] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:45.708] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:45.708] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:45.888] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:45.938] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:45.938] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:46.128] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:46.178] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:46.178] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:46.328] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:46.378] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:46.378] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:46.478] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:46.528] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:46.528] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:46.678] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:46.728] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:23:46.728] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:46.938] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:23:46.988] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:23:46.988] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:23:46.988] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:23:47.018] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:23:47.038] (PreFillP2                        :   7) @Stop
[2018-01-12 19:23:47.078] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:23:47.078] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:23:47.078] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:23:47.098] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:47.148] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:23:47.168] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:23:47.418] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:23:47.418] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:47.418] (Flush Capillary                  :   9) @Run
[2018-01-12 19:23:47.418] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:23:47.468] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:23:47.468] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:23:47.468] (Flush Singulator                 :  10) @Run
[2018-01-12 19:23:47.468] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:23:47.568] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:47.818] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:47.868] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:47.868] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:48.018] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:48.068] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:48.068] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:48.238] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:48.288] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:48.288] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:48.578] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:48.628] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:48.628] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:48.878] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:48.928] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:48.928] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:49.078] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:49.128] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:49.128] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:49.298] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:49.348] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:49.348] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:49.638] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:49.688] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:23:49.688] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:49.738] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:23:49.838] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:23:49.938] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:23:49.988] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:23:49.988] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:23:49.988] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:23:50.028] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:23:50.048] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:23:50.048] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:23:50.048] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:23:50.088] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:50.138] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:23:50.248] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:23:50.498] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:23:50.498] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:50.498] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:23:50.498] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:23:50.548] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:23:50.548] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:23:50.548] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:23:50.548] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:23:50.648] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:50.918] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:50.968] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:50.968] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:51.278] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:51.328] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:51.328] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:51.578] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:51.628] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:51.628] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:51.778] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:51.828] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:51.828] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:52.008] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:52.058] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:23:52.058] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:52.108] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:23:52.348] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:52.398] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:23:52.398] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:52.448] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:23:52.548] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:23:52.598] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:23:52.598] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:23:52.598] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:23:52.648] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:23:52.648] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:23:52.648] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:23:52.648] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:23:52.648] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:23:52.648] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:23:52.648] (Prefill before Flush             :  14) @Run
[2018-01-12 19:23:52.648] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:23:52.648] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:23:52.648] (PreFillP1                        :  15) @Run
[2018-01-12 19:23:52.648] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:23:52.698] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:23:52.698] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:23:52.698] (PreFillP2                        :  16) @Run
[2018-01-12 19:23:52.698] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:23:52.798] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:53.088] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:23:53.138] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:23:53.138] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:53.328] (PreFillP1                        :  15) @Stop
[2018-01-12 19:23:53.428] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:23:53.478] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:23:53.478] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:53.528] (PreFillP2                        :  16) @Stop
[2018-01-12 19:23:53.628] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:23:53.678] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:23:53.678] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:23:53.678] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:23:53.698] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:23:53.718] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:23:53.718] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:23:02.817] (Detector                         :   2) @Stop
[2018-01-12 19:23:54.208] ** STARTING B06 MAIN ROUTINE **
[2018-01-12 19:23:54.208] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:23:54.208] (Main Well                        :   0) @Run
[2018-01-12 19:23:54.208] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:23:54.208] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:23:54.208] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:23:54.208] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:23:54.208] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:23:54.208] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:23:54.208] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:23:54.208] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:23:54.208] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:23:54.208] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:23:54.718] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:23:54.718] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:23:54.758] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:23:54.878] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:23:54.878] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:23:54.878] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:23:54.878] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:23:54.878] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:23:54.878] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:23:54.878] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:23:54.878] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:23:54.878] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:23:54.878] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:23:54.898] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:23:54.948] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:23:54.968] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:23:55.218] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:23:55.218] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:23:55.218] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:23:55.218] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:23:55.268] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:23:55.268] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:23:55.268] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:23:55.268] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:23:55.368] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:55.638] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:23:55.688] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:23:55.688] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:55.998] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:23:56.048] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:23:56.048] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:56.298] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:23:56.348] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:23:56.348] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:56.498] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:23:56.548] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:23:56.548] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:56.598] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:23:56.718] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:23:56.768] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:23:56.768] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:56.818] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:23:57.058] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:23:57.108] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:23:57.108] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:23:57.108] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:23:57.108] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:23:57.108] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:23:57.168] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:23:57.218] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:23:57.278] (Main Well                        :   0) Move to Well 18 with z-offset of 2540 um (Wait)
[2018-01-12 19:23:59.578] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:23:59.818] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:23:59.868] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:23:59.868] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:23:59.968] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:24:00.018] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:24:00.018] (Main Well                        :   0) Stop Pump
[2018-01-12 19:24:00.058] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:24:00.118] (Main Well                        :   0) Move to Well 18 with z-offset of 310 um (Wait)
[2018-01-12 19:24:10.038] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:10.278] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:24:10.328] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:24:10.328] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:24:10.328] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:24:10.328] (Pickup Sample                    :  21) @Run
[2018-01-12 19:24:10.328] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:24:14.998] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:24:17.078] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:24:17.158] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:24:17.358] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:17.458] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:17.508] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:17.508] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:17.608] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:17.658] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:17.658] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:17.758] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:17.808] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:17.808] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:17.918] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:17.968] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:17.968] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:18.158] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:18.208] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:18.208] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:18.308] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:18.358] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:18.358] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:18.460] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:18.510] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:18.510] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:18.610] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:18.660] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:18.660] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:18.870] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:18.920] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:18.920] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:19.020] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:19.070] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:19.070] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:19.170] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:19.220] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:19.220] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:19.320] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:19.370] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:19.370] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:19.580] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:19.630] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:19.630] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:19.730] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:19.780] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:19.780] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:19.880] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:19.930] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:19.930] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:20.030] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:20.080] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:20.080] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:20.290] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:20.340] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:20.340] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:20.440] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:20.490] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:20.490] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:20.590] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:20.640] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:20.640] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:20.740] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:20.790] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:20.790] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:21.000] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:21.050] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:21.050] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:21.150] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:21.200] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:21.200] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:21.300] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:21.350] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:21.350] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:21.450] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:21.500] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:21.500] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:21.710] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:21.760] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:21.760] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:21.870] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:21.920] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:21.920] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:22.020] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:22.070] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:22.070] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:22.170] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:22.220] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:22.220] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:22.430] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:22.480] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:22.480] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:22.580] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:22.630] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:22.630] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:22.730] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:22.780] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:22.780] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:22.880] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:22.930] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:22.930] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:23.140] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:23.190] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:23.190] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:23.290] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:23.340] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:23.340] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:23.440] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:23.490] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:23.490] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:23.590] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:23.640] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:23.640] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:23.850] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:23.900] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:23.900] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:24.000] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:24.050] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:24.050] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:24.150] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:24.200] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:24.200] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:24.300] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:24.350] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:24.350] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:24.560] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:24.610] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:24.610] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:24.710] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:24.760] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:24.760] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:24.860] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:24.910] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:24.910] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:25.010] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:25.060] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:25.060] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:25.270] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:25.320] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:25.320] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:25.420] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:25.470] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:25.470] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:25.570] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:25.620] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:25.620] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:25.720] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:25.770] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:25.770] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:25.980] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:26.030] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:26.030] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:26.130] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:26.180] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:26.180] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:26.280] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:26.330] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:26.330] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:26.430] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:26.480] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:24:26.480] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:24:26.690] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:26.740] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:24:26.740] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:24:26.850] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:24:26.900] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:24:26.900] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:24:26.900] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:24:27.130] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:24:27.270] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:24:27.520] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:24:27.540] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:24:27.590] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:24:27.590] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:24:27.590] (Singulate Sample                 :  22) @Run
[2018-01-12 19:24:27.590] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:24:27.590] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:24:27.590] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:24:27.650] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:24:27.700] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:24:27.760] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:24:27.860] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_B06_RAW.qlb"
[2018-01-12 19:24:27.970] (Detector                         :   2) @Run
[2018-01-12 19:24:27.970] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:25:07.870] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:25:08.960] (Detector                         :   2) @Stop
[2018-01-12 19:25:09.070] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:25:09.070] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:09.170] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:25:09.220] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:25:09.220] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:09.330] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:25:09.380] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:25:09.380] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:25:09.380] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:25:09.590] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:25:09.590] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:25:09.590] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:25:09.590] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:25:09.590] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:25:09.590] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:25:09.590] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:09.590] (PreFillP1                        :  24) @Run
[2018-01-12 19:25:09.590] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:25:09.640] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:25:09.640] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:25:09.640] (PreFillP2                        :  25) @Run
[2018-01-12 19:25:09.640] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:25:09.740] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:10.010] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:10.060] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:10.060] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:10.230] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:10.280] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:10.280] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:10.570] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:10.620] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:10.620] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:10.880] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:10.930] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:10.930] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:11.080] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:11.130] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:11.130] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:11.300] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:11.350] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:11.350] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:11.640] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:11.690] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:11.690] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:11.940] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:11.990] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:11.990] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:12.140] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:12.190] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:12.190] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:12.360] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:12.410] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:12.410] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:12.700] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:12.750] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:25:12.750] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:12.800] (PreFillP1                        :  24) @Stop
[2018-01-12 19:25:13.000] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:13.050] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:25:13.050] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:13.150] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:13.200] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:25:13.200] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:13.370] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:25:13.420] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:25:13.420] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:25:13.420] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:25:13.440] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:25:13.440] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:25:13.440] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:25:13.530] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:25:13.580] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:25:13.630] (PreFillP2                        :  25) @Stop
[2018-01-12 19:25:13.650] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:25:13.900] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:25:13.900] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:25:13.900] (Flush Capillary                  :  27) @Run
[2018-01-12 19:25:13.900] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:25:13.950] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:25:13.950] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:25:13.950] (Flush Singulator                 :  28) @Run
[2018-01-12 19:25:13.950] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:25:14.050] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:14.340] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:25:14.390] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:14.390] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:14.680] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:25:14.730] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:14.730] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:14.880] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:25:14.930] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:14.930] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:15.080] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:25:15.130] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:15.130] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:15.300] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:25:15.350] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:25:15.350] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:15.400] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:25:15.640] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:25:15.690] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:25:15.690] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:25:15.690] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:25:15.690] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:25:15.740] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:25:15.760] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:25:15.760] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:25:15.760] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:25:15.780] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:25:15.830] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:25:15.850] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:25:16.100] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:25:16.100] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:25:16.100] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:25:16.100] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:25:16.150] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:25:16.150] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:25:16.150] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:25:16.150] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:25:16.250] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:16.420] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:25:16.470] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:16.470] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:16.720] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:25:16.770] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:16.770] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:17.080] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:25:17.130] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:25:17.130] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:17.180] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:25:17.280] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:25:17.380] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:25:17.430] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:25:17.430] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:25:17.430] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:25:17.460] (Main Well                        :   0) Stop Pump
[2018-01-12 19:25:17.500] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:25:17.500] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:25:17.500] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:25:17.540] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:25:17.590] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:25:17.700] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:25:17.950] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:25:17.950] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:25:17.950] (Flush Capillary                  :  33) @Run
[2018-01-12 19:25:17.950] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:25:18.000] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:25:18.000] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:25:18.000] (Flush Singulator                 :  34) @Run
[2018-01-12 19:25:18.000] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:25:18.100] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:18.370] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:25:18.420] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:18.420] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:18.731] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:25:18.781] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:25:18.781] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:18.831] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:25:18.931] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:25:19.031] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:25:19.081] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:25:19.081] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:25:19.081] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:25:19.101] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:25:19.121] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:25:19.121] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:25:19.121] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:25:19.141] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:25:19.191] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:25:19.321] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:25:19.571] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:25:19.571] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:25:19.571] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:25:19.571] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:25:19.621] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:25:19.621] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:25:19.621] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:25:19.621] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:25:19.721] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:19.991] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:25:20.041] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:20.041] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:20.351] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:25:20.401] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:25:20.401] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:20.451] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:25:20.551] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:25:20.651] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:25:20.701] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:25:20.701] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:25:20.701] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:25:20.721] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:25:20.741] (Main Well                        :   0) Stop routine
[2018-01-12 19:25:20.741] (Main Well                        :   0) @Stop
[2018-01-12 19:25:21.021] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:25:21.021] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:25:21.031] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:25:21.031] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:25:21.031] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:25:21.031] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:25:23.021] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:25:23.021] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:25:23.021] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:25:23.021] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:25:23.061] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:25:23.061] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:25:08.960] (Detector                         :  17) @Stop
[2018-01-12 19:25:26.801] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:25:26.801] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:25:26.801] (MainPre Routine                  :   0) @Run
[2018-01-12 19:25:26.801] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:25:32.811] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:25:32.811] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:25:32.811] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:25:33.451] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:25:33.451] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:25:33.461] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:25:35.191] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:25:35.191] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:25:35.191] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:25:35.351] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:25:35.401] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:25:35.421] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:25:35.671] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:25:35.671] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:25:35.671] (Initialize P1                    :   3) @Run
[2018-01-12 19:25:35.671] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:25:35.721] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:25:35.721] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:25:35.721] (Initialize P2                    :   4) @Run
[2018-01-12 19:25:35.721] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:25:35.901] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:36.131] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:36.251] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:25:36.301] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:36.301] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:36.351] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:25:36.401] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:36.401] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:36.591] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:25:36.641] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:36.641] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:36.691] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:25:36.741] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:36.741] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:36.791] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:25:36.841] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:36.841] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:36.891] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:25:36.941] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:36.941] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:36.991] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:25:37.041] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:37.041] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:37.091] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:25:37.141] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:37.141] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:37.211] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:25:37.261] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:37.261] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:37.451] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:25:37.501] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:37.501] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:37.551] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:25:37.601] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:37.601] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:37.651] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:25:37.701] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:37.701] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:37.751] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:25:37.801] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:37.801] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:37.851] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:25:37.901] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:37.901] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:37.951] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:25:38.001] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:38.001] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:38.071] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:25:38.121] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:38.121] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:38.311] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:25:38.361] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:38.361] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:38.411] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:25:38.461] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:25:38.461] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:38.511] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:25:38.561] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:25:38.561] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:25:38.561] (Initialize P1                    :   3) @Stop
[2018-01-12 19:25:38.611] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:25:38.661] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:25:38.661] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:25:38.661] (Initialize P2                    :   4) @Stop
[2018-01-12 19:25:38.921] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:25:39.121] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:25:39.141] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:25:39.141] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:25:39.141] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:25:39.141] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:25:39.141] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:39.141] (PreFillP1                        :   6) @Run
[2018-01-12 19:25:39.141] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:25:39.191] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:25:39.191] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:25:39.191] (PreFillP2                        :   7) @Run
[2018-01-12 19:25:39.191] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:25:39.291] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:39.561] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:39.611] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:39.611] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:39.921] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:39.971] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:39.971] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:40.221] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:40.271] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:40.271] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:40.421] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:40.471] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:40.471] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:40.641] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:40.691] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:40.691] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:40.981] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:41.031] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:41.031] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:41.281] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:41.331] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:25:41.331] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:41.381] (PreFillP1                        :   6) @Stop
[2018-01-12 19:25:41.481] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:41.531] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:25:41.531] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:41.701] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:41.751] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:25:41.751] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:41.941] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:41.991] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:25:41.991] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:42.141] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:42.191] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:25:42.191] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:42.291] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:42.341] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:25:42.341] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:42.491] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:42.541] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:25:42.541] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:42.751] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:42.801] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:25:42.801] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:25:42.801] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:25:42.841] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:25:42.851] (PreFillP2                        :   7) @Stop
[2018-01-12 19:25:42.891] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:25:42.891] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:25:42.891] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:25:42.911] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:42.961] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:25:42.981] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:25:43.231] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:25:43.231] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:43.231] (Flush Capillary                  :   9) @Run
[2018-01-12 19:25:43.231] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:25:43.281] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:25:43.281] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:25:43.281] (Flush Singulator                 :  10) @Run
[2018-01-12 19:25:43.281] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:25:43.381] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:43.631] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:43.681] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:43.681] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:43.831] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:43.881] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:43.881] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:44.051] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:44.101] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:44.101] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:44.391] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:44.441] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:44.441] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:44.691] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:44.741] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:44.741] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:44.891] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:44.941] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:44.941] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:45.111] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:45.161] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:45.161] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:45.451] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:45.501] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:25:45.501] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:45.551] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:25:45.651] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:25:45.751] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:45.801] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:25:45.801] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:25:45.801] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:25:45.841] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:25:45.861] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:25:45.861] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:25:45.861] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:25:45.901] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:45.951] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:25:46.061] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:25:46.311] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:25:46.311] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:46.311] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:25:46.311] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:25:46.361] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:25:46.361] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:25:46.361] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:25:46.361] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:25:46.461] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:46.731] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:46.781] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:46.781] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:47.091] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:47.141] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:47.141] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:47.391] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:47.441] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:47.441] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:47.591] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:47.641] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:47.641] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:47.811] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:47.861] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:47.861] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:47.911] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:25:48.151] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:48.201] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:25:48.201] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:48.251] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:25:48.351] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:48.401] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:25:48.401] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:25:48.401] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:25:48.411] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:25:48.411] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:25:48.411] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:25:48.411] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:25:48.411] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:25:48.411] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:25:48.411] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:48.411] (PreFillP1                        :   6) @Run
[2018-01-12 19:25:48.411] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:25:48.461] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:25:48.461] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:25:48.461] (PreFillP2                        :   7) @Run
[2018-01-12 19:25:48.461] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:25:48.561] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:48.851] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:48.901] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:48.901] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:49.191] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:49.241] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:49.241] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:49.391] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:49.441] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:49.441] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:49.591] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:49.641] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:49.641] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:49.811] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:49.861] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:49.861] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:50.151] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:50.201] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:50.201] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:50.451] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:50.501] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:50.501] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:50.651] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:50.701] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:25:50.701] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:50.751] (PreFillP1                        :   6) @Stop
[2018-01-12 19:25:50.871] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:50.921] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:25:50.921] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:51.211] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:51.261] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:25:51.261] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:51.411] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:51.461] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:25:51.461] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:51.561] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:51.611] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:25:51.611] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:51.761] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:51.811] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:25:51.811] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:52.021] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:25:52.071] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:25:52.071] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:25:52.071] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:25:52.111] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:25:52.121] (PreFillP2                        :   7) @Stop
[2018-01-12 19:25:52.161] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:25:52.161] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:25:52.161] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:25:52.181] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:52.231] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:25:52.251] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:25:52.501] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:25:52.501] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:52.501] (Flush Capillary                  :   9) @Run
[2018-01-12 19:25:52.501] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:25:52.551] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:25:52.551] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:25:52.551] (Flush Singulator                 :  10) @Run
[2018-01-12 19:25:52.551] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:25:52.651] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:52.901] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:52.951] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:52.951] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:53.101] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:53.151] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:53.151] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:53.321] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:53.371] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:53.371] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:53.661] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:53.711] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:53.711] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:53.961] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:54.011] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:54.011] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:54.161] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:54.211] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:54.211] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:54.381] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:54.431] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:54.431] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:54.721] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:54.771] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:25:54.771] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:54.821] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:25:54.921] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:25:55.021] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:25:55.071] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:25:55.071] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:25:55.071] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:25:55.111] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:25:55.131] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:25:55.131] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:25:55.131] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:25:55.171] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:55.221] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:25:55.331] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:25:55.581] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:25:55.581] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:55.581] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:25:55.581] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:25:55.631] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:25:55.631] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:25:55.631] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:25:55.631] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:25:55.731] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:56.001] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:56.051] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:56.051] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:56.361] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:56.411] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:56.411] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:56.661] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:56.711] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:56.711] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:56.861] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:56.911] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:56.911] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:57.081] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:57.131] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:25:57.131] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:57.181] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:25:57.421] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:57.471] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:25:57.471] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:57.521] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:25:57.621] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:25:57.671] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:25:57.671] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:25:57.671] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:25:57.681] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:25:57.681] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:25:57.681] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:25:57.681] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:25:57.681] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:25:57.681] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:25:57.681] (Prefill before Flush             :  14) @Run
[2018-01-12 19:25:57.681] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:25:57.681] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:25:57.681] (PreFillP1                        :  15) @Run
[2018-01-12 19:25:57.681] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:25:57.731] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:25:57.731] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:25:57.731] (PreFillP2                        :  16) @Run
[2018-01-12 19:25:57.731] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:25:57.831] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:58.121] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:25:58.171] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:25:58.171] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:25:58.361] (PreFillP1                        :  15) @Stop
[2018-01-12 19:25:58.461] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:25:58.511] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:25:58.511] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:25:58.561] (PreFillP2                        :  16) @Stop
[2018-01-12 19:25:58.661] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:25:58.711] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:25:58.711] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:25:58.711] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:25:58.731] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:25:58.751] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:25:58.751] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:25:08.960] (Detector                         :   2) @Stop
[2018-01-12 19:25:58.891] ** STARTING C06 MAIN ROUTINE **
[2018-01-12 19:25:58.891] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:25:58.891] (Main Well                        :   0) @Run
[2018-01-12 19:25:58.891] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:25:58.891] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:25:58.891] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:25:58.891] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:25:58.891] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:25:58.891] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:25:58.891] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:25:58.891] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:25:58.891] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:25:58.891] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:25:59.421] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:25:59.421] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:25:59.441] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:25:59.441] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:25:59.581] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:25:59.581] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:25:59.581] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:25:59.581] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:25:59.581] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:25:59.581] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:25:59.581] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:25:59.581] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:25:59.581] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:25:59.601] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:25:59.651] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:25:59.671] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:25:59.921] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:25:59.921] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:25:59.921] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:25:59.921] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:25:59.971] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:25:59.971] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:25:59.971] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:25:59.971] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:26:00.071] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:26:00.341] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:26:00.391] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:26:00.391] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:26:00.701] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:26:00.751] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:26:00.751] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:26:01.001] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:26:01.051] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:26:01.051] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:26:01.201] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:26:01.251] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:26:01.251] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:26:01.301] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:26:01.421] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:26:01.471] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:26:01.471] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:01.521] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:26:01.761] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:26:01.811] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:26:01.811] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:26:01.811] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:26:01.811] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:26:01.811] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:26:01.871] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:26:01.921] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:26:01.981] (Main Well                        :   0) Move to Well 30 with z-offset of 2540 um (Wait)
[2018-01-12 19:26:04.601] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:26:04.841] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:26:04.891] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:26:04.891] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:04.991] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:26:05.041] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:26:05.041] (Main Well                        :   0) Stop Pump
[2018-01-12 19:26:05.081] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:26:05.141] (Main Well                        :   0) Move to Well 30 with z-offset of 310 um (Wait)
[2018-01-12 19:26:14.081] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:14.321] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:26:14.371] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:26:14.371] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:26:14.371] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:26:14.371] (Pickup Sample                    :  21) @Run
[2018-01-12 19:26:14.371] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:26:19.041] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:26:21.481] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:26:21.561] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:26:21.761] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:21.861] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:21.911] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:21.911] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:22.011] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:22.061] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:22.061] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:22.161] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:22.211] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:22.211] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:22.321] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:22.371] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:22.371] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:22.561] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:22.611] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:22.611] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:22.711] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:22.761] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:22.761] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:22.861] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:22.911] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:22.911] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:23.011] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:23.061] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:23.061] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:23.271] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:23.321] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:23.321] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:23.421] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:23.471] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:23.471] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:23.571] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:23.621] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:23.621] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:23.721] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:23.771] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:23.771] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:23.981] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:24.031] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:24.031] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:24.131] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:24.181] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:24.181] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:24.281] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:24.331] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:24.331] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:24.431] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:24.481] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:24.481] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:24.691] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:24.741] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:24.741] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:24.841] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:24.891] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:24.891] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:24.991] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:25.041] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:25.041] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:25.141] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:25.191] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:25.191] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:25.401] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:25.451] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:25.451] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:25.551] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:25.601] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:25.601] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:25.701] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:25.751] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:25.751] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:25.851] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:25.901] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:25.901] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:26.111] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:26.161] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:26.161] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:26.261] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:26.311] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:26.311] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:26.411] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:26.461] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:26.461] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:26.561] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:26.611] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:26.611] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:26.821] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:26.871] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:26.871] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:26.971] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:27.021] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:27.021] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:27.121] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:27.171] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:27.171] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:27.271] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:27.321] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:27.321] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:27.531] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:27.581] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:27.581] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:27.681] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:27.731] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:27.731] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:27.831] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:27.881] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:27.881] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:27.981] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:28.031] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:28.031] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:28.241] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:28.291] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:28.291] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:28.391] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:28.441] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:28.441] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:28.541] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:28.591] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:28.591] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:28.691] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:28.741] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:28.741] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:28.951] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:29.001] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:29.001] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:29.101] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:29.151] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:29.151] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:29.251] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:29.301] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:29.301] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:29.401] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:29.451] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:29.451] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:29.661] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:29.711] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:29.711] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:29.811] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:29.861] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:29.861] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:29.961] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:30.011] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:30.011] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:30.111] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:30.161] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:30.161] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:30.371] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:30.421] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:30.421] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:30.521] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:30.571] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:30.571] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:30.671] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:30.721] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:30.721] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:30.821] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:30.871] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:26:30.871] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:26:31.081] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:31.131] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:26:31.131] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:26:31.231] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:26:31.281] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:26:31.281] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:26:31.281] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:26:31.571] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:26:31.661] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:26:31.911] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:26:31.931] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:26:31.981] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:26:31.981] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:26:31.981] (Singulate Sample                 :  22) @Run
[2018-01-12 19:26:31.981] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:26:31.981] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:26:31.981] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:26:32.041] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:26:32.091] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:26:32.151] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:26:32.251] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_C06_RAW.qlb"
[2018-01-12 19:26:32.361] (Detector                         :   2) @Run
[2018-01-12 19:26:32.361] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:27:12.261] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:27:13.271] (Detector                         :   2) @Stop
[2018-01-12 19:27:13.461] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:27:13.461] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:13.561] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:27:13.611] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:27:13.611] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:13.711] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:27:13.761] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:27:13.761] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:27:13.761] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:27:13.981] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:27:13.981] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:27:13.981] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:27:13.981] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:27:13.981] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:27:13.981] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:27:13.981] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:13.981] (PreFillP1                        :  24) @Run
[2018-01-12 19:27:13.981] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:27:14.031] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:27:14.031] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:27:14.031] (PreFillP2                        :  25) @Run
[2018-01-12 19:27:14.031] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:27:14.131] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:14.401] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:14.451] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:14.451] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:14.621] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:14.671] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:14.671] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:14.971] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:15.021] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:15.021] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:15.271] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:15.321] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:15.321] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:15.471] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:15.521] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:15.521] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:15.691] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:15.741] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:15.741] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:16.031] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:16.081] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:16.081] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:16.331] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:16.381] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:16.381] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:16.531] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:16.581] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:16.581] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:16.751] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:16.801] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:16.801] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:17.091] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:17.141] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:27:17.141] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:17.191] (PreFillP1                        :  24) @Stop
[2018-01-12 19:27:17.391] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:17.441] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:27:17.441] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:17.541] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:17.591] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:27:17.591] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:17.761] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:27:17.811] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:27:17.811] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:27:17.811] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:27:17.831] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:27:17.831] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:27:17.831] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:27:17.921] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:27:17.971] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:27:18.021] (PreFillP2                        :  25) @Stop
[2018-01-12 19:27:18.041] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:27:18.291] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:27:18.291] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:27:18.291] (Flush Capillary                  :  27) @Run
[2018-01-12 19:27:18.291] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:27:18.341] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:27:18.341] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:27:18.341] (Flush Singulator                 :  28) @Run
[2018-01-12 19:27:18.341] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:27:18.441] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:18.731] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:27:18.781] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:18.781] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:19.071] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:27:19.121] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:19.121] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:19.271] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:27:19.321] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:19.321] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:19.471] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:27:19.521] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:19.521] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:19.691] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:27:19.741] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:27:19.741] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:19.791] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:27:20.031] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:27:20.081] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:27:20.081] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:27:20.081] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:27:20.131] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:27:20.131] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:27:20.151] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:27:20.151] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:27:20.151] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:27:20.171] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:27:20.221] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:27:20.241] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:27:20.491] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:27:20.491] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:27:20.491] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:27:20.491] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:27:20.541] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:27:20.541] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:27:20.541] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:27:20.541] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:27:20.641] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:20.811] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:27:20.861] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:20.861] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:21.111] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:27:21.161] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:21.161] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:21.471] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:27:21.521] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:27:21.521] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:21.571] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:27:21.671] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:27:21.771] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:27:21.821] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:27:21.821] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:27:21.821] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:27:21.851] (Main Well                        :   0) Stop Pump
[2018-01-12 19:27:21.911] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:27:21.911] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:27:21.911] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:27:21.951] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:27:22.001] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:27:22.111] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:27:22.361] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:27:22.361] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:27:22.361] (Flush Capillary                  :  33) @Run
[2018-01-12 19:27:22.361] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:27:22.411] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:27:22.411] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:27:22.411] (Flush Singulator                 :  34) @Run
[2018-01-12 19:27:22.411] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:27:22.511] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:22.781] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:27:22.831] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:22.831] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:23.141] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:27:23.191] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:27:23.191] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:23.241] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:27:23.341] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:27:23.441] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:27:23.491] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:27:23.491] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:27:23.491] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:27:23.511] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:27:23.531] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:27:23.531] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:27:23.531] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:27:23.551] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:27:23.601] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:27:23.731] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:27:23.981] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:27:23.981] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:27:23.981] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:27:23.981] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:27:24.031] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:27:24.031] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:27:24.031] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:27:24.031] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:27:24.131] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:24.401] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:27:24.451] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:24.451] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:24.761] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:27:24.811] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:27:24.811] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:24.861] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:27:24.961] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:27:25.061] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:27:25.111] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:27:25.111] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:27:25.111] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:27:25.131] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:27:25.151] (Main Well                        :   0) Stop routine
[2018-01-12 19:27:25.151] (Main Well                        :   0) @Stop
[2018-01-12 19:27:25.191] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:27:25.191] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:27:25.191] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:27:25.191] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:27:25.321] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:27:25.321] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:27:27.191] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:27:27.191] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:27:27.191] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:27:27.191] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:27:27.341] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:27:27.341] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:27:13.271] (Detector                         :  17) @Stop
[2018-01-12 19:27:31.471] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:27:31.471] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:27:31.471] (MainPre Routine                  :   0) @Run
[2018-01-12 19:27:31.471] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:27:37.571] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:27:37.571] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:27:37.571] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:27:38.211] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:27:38.211] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:27:38.221] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:27:39.951] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:27:39.951] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:27:39.951] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:27:40.111] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:27:40.161] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:27:40.181] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:27:40.431] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:27:40.431] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:27:40.431] (Initialize P1                    :   3) @Run
[2018-01-12 19:27:40.431] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:27:40.481] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:27:40.481] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:27:40.481] (Initialize P2                    :   4) @Run
[2018-01-12 19:27:40.481] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:27:40.661] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:40.891] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:41.011] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:27:41.061] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:41.061] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:41.111] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:27:41.161] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:41.161] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:41.351] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:27:41.401] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:41.401] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:41.451] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:27:41.501] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:41.501] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:41.551] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:27:41.601] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:41.601] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:41.651] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:27:41.701] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:41.701] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:41.751] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:27:41.801] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:41.801] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:41.851] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:27:41.901] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:41.901] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:41.971] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:27:42.021] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:42.021] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:42.211] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:27:42.261] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:42.261] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:42.311] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:27:42.361] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:42.361] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:42.411] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:27:42.461] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:42.461] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:42.511] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:27:42.561] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:42.561] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:42.611] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:27:42.661] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:42.661] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:42.711] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:27:42.761] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:42.761] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:42.831] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:27:42.881] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:42.881] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:43.071] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:27:43.121] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:43.121] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:43.171] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:27:43.221] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:27:43.221] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:43.271] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:27:43.321] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:27:43.321] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:27:43.321] (Initialize P1                    :   3) @Stop
[2018-01-12 19:27:43.371] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:27:43.421] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:27:43.421] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:27:43.421] (Initialize P2                    :   4) @Stop
[2018-01-12 19:27:43.681] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:27:43.881] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:27:43.901] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:27:43.901] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:27:43.901] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:27:43.901] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:27:43.901] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:43.901] (PreFillP1                        :   6) @Run
[2018-01-12 19:27:43.901] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:27:43.951] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:27:43.951] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:27:43.951] (PreFillP2                        :   7) @Run
[2018-01-12 19:27:43.951] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:27:44.051] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:44.321] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:44.371] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:44.371] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:44.681] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:44.731] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:44.731] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:44.981] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:45.031] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:45.031] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:45.181] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:45.231] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:45.231] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:45.401] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:45.451] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:45.451] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:45.741] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:45.791] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:45.791] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:46.041] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:46.091] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:27:46.091] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:46.141] (PreFillP1                        :   6) @Stop
[2018-01-12 19:27:46.241] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:46.291] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:27:46.291] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:46.461] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:46.511] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:27:46.511] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:46.701] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:46.751] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:27:46.751] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:46.901] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:46.951] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:27:46.951] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:47.051] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:47.101] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:27:47.101] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:47.251] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:47.301] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:27:47.301] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:47.511] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:47.561] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:27:47.561] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:27:47.561] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:27:47.601] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:27:47.611] (PreFillP2                        :   7) @Stop
[2018-01-12 19:27:47.651] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:27:47.651] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:27:47.651] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:27:47.671] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:47.721] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:27:47.741] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:27:47.991] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:27:47.991] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:47.991] (Flush Capillary                  :   9) @Run
[2018-01-12 19:27:47.991] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:27:48.041] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:27:48.041] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:27:48.041] (Flush Singulator                 :  10) @Run
[2018-01-12 19:27:48.041] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:27:48.141] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:48.391] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:48.441] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:48.441] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:48.591] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:48.641] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:48.641] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:48.811] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:48.861] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:48.861] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:49.151] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:49.201] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:49.201] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:49.451] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:49.501] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:49.501] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:49.651] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:49.701] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:49.701] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:49.871] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:49.921] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:49.921] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:50.211] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:50.261] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:27:50.261] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:50.311] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:27:50.411] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:27:50.511] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:50.561] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:27:50.561] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:27:50.561] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:27:50.601] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:27:50.621] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:27:50.621] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:27:50.621] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:27:50.661] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:27:50.711] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:27:50.821] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:27:51.071] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:27:51.071] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:27:51.071] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:27:51.071] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:27:51.121] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:27:51.121] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:27:51.121] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:27:51.121] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:27:51.221] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:51.491] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:27:51.541] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:51.541] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:51.851] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:27:51.901] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:51.901] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:52.151] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:27:52.201] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:52.201] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:52.351] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:27:52.401] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:52.401] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:52.571] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:27:52.621] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:52.621] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:52.671] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:27:52.911] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:27:52.961] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:27:52.961] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:53.011] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:27:53.111] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:27:53.161] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:27:53.161] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:27:53.161] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:27:53.171] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:27:53.171] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:27:53.171] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:27:53.171] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:27:53.171] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:27:53.171] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:27:53.171] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:53.171] (PreFillP1                        :   6) @Run
[2018-01-12 19:27:53.171] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:27:53.221] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:27:53.221] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:27:53.221] (PreFillP2                        :   7) @Run
[2018-01-12 19:27:53.221] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:27:53.321] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:53.611] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:53.661] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:53.661] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:53.951] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:54.001] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:54.001] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:54.151] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:54.201] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:54.201] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:54.351] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:54.401] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:54.401] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:54.571] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:54.621] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:54.621] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:54.911] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:54.961] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:54.961] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:55.211] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:55.261] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:27:55.261] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:55.411] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:55.461] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:27:55.461] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:55.511] (PreFillP1                        :   6) @Stop
[2018-01-12 19:27:55.631] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:55.681] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:27:55.681] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:55.981] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:56.031] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:27:56.031] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:56.181] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:56.231] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:27:56.231] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:56.331] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:56.381] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:27:56.381] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:56.531] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:56.581] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:27:56.581] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:56.791] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:27:56.841] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:27:56.841] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:27:56.841] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:27:56.871] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:27:56.891] (PreFillP2                        :   7) @Stop
[2018-01-12 19:27:56.931] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:27:56.931] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:27:56.931] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:27:56.951] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:57.001] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:27:57.021] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:27:57.271] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:27:57.271] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:57.271] (Flush Capillary                  :   9) @Run
[2018-01-12 19:27:57.271] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:27:57.321] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:27:57.321] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:27:57.321] (Flush Singulator                 :  10) @Run
[2018-01-12 19:27:57.321] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:27:57.421] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:57.671] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:57.721] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:57.721] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:57.871] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:57.921] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:57.921] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:58.091] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:58.141] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:58.141] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:58.431] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:58.481] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:58.481] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:58.731] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:58.781] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:58.781] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:58.931] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:58.981] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:58.981] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:59.151] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:59.201] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:27:59.201] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:27:59.491] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:59.541] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:27:59.541] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:27:59.591] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:27:59.691] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:27:59.791] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:27:59.841] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:27:59.841] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:27:59.841] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:27:59.881] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:27:59.901] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:27:59.901] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:27:59.901] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:27:59.941] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:27:59.991] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:28:00.101] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:28:00.351] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:28:00.351] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:28:00.351] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:28:00.351] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:28:00.401] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:28:00.401] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:28:00.401] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:28:00.401] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:28:00.501] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:00.771] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:28:00.821] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:28:00.821] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:01.131] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:28:01.181] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:28:01.181] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:01.431] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:28:01.481] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:28:01.481] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:01.631] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:28:01.681] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:28:01.681] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:01.851] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:28:01.901] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:28:01.901] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:01.951] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:28:02.191] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:28:02.241] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:28:02.241] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:02.291] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:28:02.391] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:28:02.441] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:28:02.441] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:28:02.441] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:28:02.451] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:28:02.451] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:28:02.451] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:28:02.451] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:28:02.451] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:28:02.451] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:28:02.451] (Prefill before Flush             :  14) @Run
[2018-01-12 19:28:02.451] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:28:02.451] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:28:02.451] (PreFillP1                        :  15) @Run
[2018-01-12 19:28:02.451] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:28:02.501] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:28:02.501] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:28:02.501] (PreFillP2                        :  16) @Run
[2018-01-12 19:28:02.501] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:28:02.601] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:02.891] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:28:02.941] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:02.941] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:03.131] (PreFillP1                        :  15) @Stop
[2018-01-12 19:28:03.231] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:28:03.281] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:28:03.281] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:03.331] (PreFillP2                        :  16) @Stop
[2018-01-12 19:28:03.431] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:28:03.481] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:28:03.481] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:28:03.481] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:28:03.501] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:28:03.521] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:28:03.521] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:27:13.271] (Detector                         :   2) @Stop
[2018-01-12 19:28:04.041] ** STARTING D06 MAIN ROUTINE **
[2018-01-12 19:28:04.041] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:28:04.041] (Main Well                        :   0) @Run
[2018-01-12 19:28:04.041] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:28:04.051] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:28:04.051] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:28:04.051] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:28:04.051] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:28:04.051] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:28:04.051] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:28:04.051] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:28:04.051] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:28:04.051] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:28:04.551] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:28:04.551] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:28:04.601] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:28:04.711] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:28:04.711] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:28:04.711] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:28:04.711] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:28:04.711] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:28:04.711] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:28:04.711] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:28:04.711] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:28:04.711] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:28:04.711] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:28:04.731] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:28:04.781] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:28:04.801] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:28:05.051] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:28:05.051] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:28:05.051] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:28:05.051] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:28:05.101] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:28:05.101] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:28:05.101] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:28:05.101] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:28:05.201] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:05.471] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:28:05.521] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:28:05.521] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:05.831] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:28:05.881] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:28:05.881] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:06.131] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:28:06.181] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:28:06.181] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:06.331] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:28:06.381] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:28:06.381] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:06.431] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:28:06.551] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:28:06.601] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:28:06.601] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:06.651] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:28:06.891] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:28:06.941] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:28:06.941] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:28:06.941] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:28:06.941] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:28:06.941] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:28:07.001] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:28:07.051] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:28:07.111] (Main Well                        :   0) Move to Well 42 with z-offset of 2540 um (Wait)
[2018-01-12 19:28:09.831] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:10.071] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:28:10.121] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:28:10.121] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:10.221] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:28:10.271] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:28:10.271] (Main Well                        :   0) Stop Pump
[2018-01-12 19:28:10.311] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:28:10.371] (Main Well                        :   0) Move to Well 42 with z-offset of 310 um (Wait)
[2018-01-12 19:28:20.573] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:20.813] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:28:20.863] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:28:20.863] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:28:20.863] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:28:20.863] (Pickup Sample                    :  21) @Run
[2018-01-12 19:28:20.863] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:28:25.533] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:28:27.973] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:28:28.053] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:28:28.253] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:28.353] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:28.403] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:28.403] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:28.503] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:28.553] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:28.553] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:28.653] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:28.703] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:28.703] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:28.813] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:28.863] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:28.863] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:29.053] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:29.103] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:29.103] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:29.203] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:29.253] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:29.253] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:29.353] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:29.403] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:29.403] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:29.503] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:29.553] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:29.553] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:29.763] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:29.813] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:29.813] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:29.913] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:29.963] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:29.963] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:30.063] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:30.113] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:30.113] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:30.213] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:30.263] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:30.263] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:30.473] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:30.523] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:30.523] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:30.623] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:30.673] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:30.673] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:30.773] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:30.823] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:30.823] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:30.923] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:30.973] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:30.973] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:31.183] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:31.233] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:31.233] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:31.333] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:31.383] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:31.383] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:31.483] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:31.533] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:31.533] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:31.633] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:31.683] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:31.683] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:31.893] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:31.943] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:31.943] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:32.043] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:32.093] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:32.093] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:32.193] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:32.243] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:32.243] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:32.343] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:32.393] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:32.393] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:32.603] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:32.653] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:32.653] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:32.753] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:32.803] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:32.803] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:32.903] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:32.953] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:32.953] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:33.053] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:33.103] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:33.103] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:33.313] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:33.363] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:33.363] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:33.463] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:33.513] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:33.513] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:33.613] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:33.663] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:33.663] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:33.763] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:33.813] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:33.813] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:34.023] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:34.073] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:34.073] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:34.173] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:34.223] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:34.223] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:34.323] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:34.373] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:34.373] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:34.473] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:34.523] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:34.523] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:34.733] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:34.783] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:34.783] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:34.883] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:34.933] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:34.933] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:35.033] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:35.083] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:35.083] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:35.183] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:35.233] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:35.233] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:35.443] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:35.493] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:35.493] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:35.593] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:35.643] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:35.643] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:35.743] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:35.793] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:35.793] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:35.893] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:35.943] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:35.943] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:36.153] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:36.203] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:36.203] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:36.303] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:36.353] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:36.353] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:36.453] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:36.503] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:36.503] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:36.603] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:36.653] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:36.653] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:36.863] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:36.913] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:36.913] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:37.013] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:37.063] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:37.063] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:37.163] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:37.213] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:37.213] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:37.313] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:37.363] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:28:37.363] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:28:37.573] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:37.623] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:28:37.623] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:28:37.723] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:28:37.773] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:28:37.773] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:28:37.773] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:28:38.063] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:28:38.153] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:28:38.403] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:28:38.423] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:28:38.473] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:28:38.473] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:28:38.473] (Singulate Sample                 :  22) @Run
[2018-01-12 19:28:38.473] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:28:38.473] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:28:38.473] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:28:38.533] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:28:38.583] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:28:38.643] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:28:38.743] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_D06_RAW.qlb"
[2018-01-12 19:28:38.853] (Detector                         :   2) @Run
[2018-01-12 19:28:38.853] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:29:18.753] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:29:19.743] (Detector                         :   2) @Stop
[2018-01-12 19:29:19.753] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:29:19.753] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:19.863] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:29:19.913] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:29:19.913] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:20.013] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:29:20.063] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:29:20.063] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:29:20.063] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:29:20.273] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:29:20.273] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:29:20.273] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:29:20.273] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:29:20.273] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:29:20.273] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:29:20.273] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:20.273] (PreFillP1                        :  24) @Run
[2018-01-12 19:29:20.273] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:29:20.323] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:29:20.323] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:29:20.323] (PreFillP2                        :  25) @Run
[2018-01-12 19:29:20.323] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:29:20.423] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:20.753] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:20.803] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:20.803] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:20.953] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:21.003] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:21.003] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:21.173] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:21.223] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:21.223] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:21.513] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:21.563] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:21.563] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:21.813] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:21.863] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:21.863] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:22.013] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:22.063] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:22.063] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:22.233] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:22.283] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:22.283] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:22.573] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:22.623] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:22.623] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:22.873] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:22.923] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:22.923] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:23.073] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:23.123] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:23.123] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:23.293] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:23.343] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:29:23.343] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:23.633] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:23.683] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:29:23.683] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:23.733] (PreFillP1                        :  24) @Stop
[2018-01-12 19:29:23.933] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:23.983] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:29:23.983] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:24.083] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:24.133] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:29:24.133] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:24.183] (PreFillP2                        :  25) @Stop
[2018-01-12 19:29:24.303] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:29:24.353] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:29:24.353] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:29:24.353] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:29:24.373] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:29:24.373] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:29:24.373] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:29:24.463] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:29:24.513] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:29:24.533] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:29:24.783] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:29:24.783] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:29:24.783] (Flush Capillary                  :  27) @Run
[2018-01-12 19:29:24.783] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:29:24.833] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:29:24.833] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:29:24.833] (Flush Singulator                 :  28) @Run
[2018-01-12 19:29:24.833] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:29:24.933] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:25.203] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:29:25.253] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:25.253] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:25.563] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:29:25.613] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:25.613] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:25.863] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:29:25.913] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:25.913] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:26.063] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:29:26.113] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:26.113] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:26.163] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:29:26.283] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:29:26.333] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:29:26.333] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:26.383] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:29:26.623] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:29:26.673] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:29:26.673] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:29:26.673] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:29:26.723] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:29:26.743] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:29:26.743] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:29:26.743] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:29:26.763] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:29:26.813] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:29:26.833] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:29:27.083] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:29:27.083] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:29:27.083] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:29:27.083] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:29:27.133] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:29:27.133] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:29:27.133] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:29:27.133] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:29:27.233] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:27.403] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:29:27.453] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:27.453] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:27.703] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:29:27.753] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:27.753] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:28.063] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:29:28.113] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:29:28.113] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:28.163] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:29:28.263] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:29:28.363] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:29:28.413] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:29:28.413] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:29:28.413] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:29:28.443] (Main Well                        :   0) Stop Pump
[2018-01-12 19:29:28.483] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:29:28.483] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:29:28.483] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:29:28.523] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:29:28.573] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:29:28.683] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:29:28.933] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:29:28.933] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:29:28.933] (Flush Capillary                  :  33) @Run
[2018-01-12 19:29:28.933] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:29:28.983] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:29:28.983] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:29:28.983] (Flush Singulator                 :  34) @Run
[2018-01-12 19:29:28.983] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:29:29.083] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:29.353] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:29:29.403] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:29.403] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:29.713] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:29:29.763] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:29:29.763] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:29.813] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:29:29.913] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:29:30.013] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:29:30.063] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:29:30.063] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:29:30.063] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:29:30.083] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:29:30.103] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:29:30.103] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:29:30.103] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:29:30.123] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:29:30.173] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:29:30.303] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:29:30.553] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:29:30.553] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:29:30.553] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:29:30.553] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:29:30.603] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:29:30.603] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:29:30.603] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:29:30.603] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:29:30.703] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:30.973] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:29:31.023] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:31.023] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:31.333] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:29:31.383] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:29:31.383] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:31.433] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:29:31.533] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:29:31.633] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:29:31.683] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:29:31.683] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:29:31.683] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:29:31.703] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:29:31.723] (Main Well                        :   0) Stop routine
[2018-01-12 19:29:31.723] (Main Well                        :   0) @Stop
[2018-01-12 19:29:32.103] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:29:32.103] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:29:32.103] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:29:32.103] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:29:32.103] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:29:32.103] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:29:34.103] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:29:34.103] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:29:34.103] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:29:34.103] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:29:34.143] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:29:34.143] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:29:19.743] (Detector                         :  17) @Stop
[2018-01-12 19:29:41.593] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:29:41.593] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:29:41.593] (MainPre Routine                  :   0) @Run
[2018-01-12 19:29:41.593] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:29:47.573] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:29:47.573] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:29:47.573] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:29:48.213] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:29:48.213] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:29:48.223] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:29:49.953] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:29:49.953] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:29:49.953] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:29:50.113] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:29:50.163] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:29:50.183] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:29:50.433] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:29:50.433] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:29:50.433] (Initialize P1                    :   3) @Run
[2018-01-12 19:29:50.433] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:29:50.483] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:29:50.483] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:29:50.483] (Initialize P2                    :   4) @Run
[2018-01-12 19:29:50.483] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:29:50.663] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:50.893] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:51.013] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:29:51.063] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:51.063] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:51.113] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:29:51.163] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:51.163] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:51.353] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:29:51.403] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:51.403] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:51.453] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:29:51.503] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:51.503] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:51.553] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:29:51.603] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:51.603] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:51.653] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:29:51.703] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:51.703] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:51.753] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:29:51.803] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:51.803] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:51.853] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:29:51.903] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:51.903] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:51.973] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:29:52.023] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:52.023] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:52.213] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:29:52.263] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:52.263] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:52.313] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:29:52.363] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:52.363] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:52.413] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:29:52.463] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:52.463] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:52.513] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:29:52.563] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:52.563] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:52.613] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:29:52.663] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:52.663] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:52.713] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:29:52.763] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:52.763] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:52.833] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:29:52.883] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:52.883] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:53.073] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:29:53.123] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:53.123] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:53.173] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:29:53.223] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:29:53.223] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:53.273] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:29:53.323] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:29:53.323] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:29:53.323] (Initialize P1                    :   3) @Stop
[2018-01-12 19:29:53.373] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:29:53.423] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:29:53.423] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:29:53.423] (Initialize P2                    :   4) @Stop
[2018-01-12 19:29:53.683] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:29:53.883] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:29:53.903] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:29:53.903] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:29:53.903] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:29:53.903] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:29:53.903] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:53.903] (PreFillP1                        :   6) @Run
[2018-01-12 19:29:53.903] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:29:53.953] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:29:53.953] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:29:53.953] (PreFillP2                        :   7) @Run
[2018-01-12 19:29:53.953] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:29:54.053] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:54.323] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:54.373] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:54.373] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:54.683] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:54.733] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:54.733] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:54.983] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:55.033] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:55.033] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:55.183] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:55.233] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:55.233] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:55.403] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:55.453] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:55.453] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:55.743] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:55.793] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:29:55.793] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:56.043] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:56.093] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:29:56.093] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:56.143] (PreFillP1                        :   6) @Stop
[2018-01-12 19:29:56.243] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:56.293] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:29:56.293] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:56.463] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:56.513] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:29:56.513] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:56.703] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:56.753] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:29:56.753] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:56.903] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:56.953] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:29:56.953] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:57.053] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:57.103] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:29:57.103] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:57.253] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:57.303] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:29:57.303] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:29:57.513] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:29:57.563] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:29:57.563] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:29:57.563] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:29:57.603] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:29:57.613] (PreFillP2                        :   7) @Stop
[2018-01-12 19:29:57.653] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:29:57.653] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:29:57.653] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:29:57.673] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:29:57.723] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:29:57.743] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:29:57.993] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:29:57.993] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:29:57.993] (Flush Capillary                  :   9) @Run
[2018-01-12 19:29:57.993] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:29:58.043] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:29:58.043] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:29:58.043] (Flush Singulator                 :  10) @Run
[2018-01-12 19:29:58.043] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:29:58.143] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:58.393] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:29:58.443] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:58.443] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:58.593] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:29:58.643] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:58.643] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:58.813] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:29:58.863] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:58.863] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:59.153] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:29:59.203] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:59.203] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:59.453] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:29:59.503] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:59.503] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:59.653] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:29:59.703] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:59.703] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:29:59.873] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:29:59.923] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:29:59.923] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:00.213] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:30:00.263] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:30:00.263] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:00.313] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:30:00.413] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:30:00.513] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:30:00.563] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:30:00.563] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:30:00.563] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:30:00.603] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:30:00.623] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:30:00.623] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:30:00.623] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:30:00.663] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:00.713] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:30:00.823] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:30:01.073] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:30:01.073] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:01.073] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:30:01.073] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:30:01.123] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:30:01.123] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:30:01.123] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:30:01.123] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:30:01.223] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:01.493] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:01.543] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:01.543] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:01.853] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:01.903] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:01.903] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:02.153] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:02.203] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:02.203] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:02.353] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:02.403] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:02.403] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:02.573] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:02.623] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:02.623] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:02.673] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:30:02.913] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:02.963] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:30:02.963] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:03.013] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:30:03.113] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:03.163] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:30:03.163] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:30:03.163] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:30:03.173] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:30:03.173] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:30:03.173] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:30:03.173] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:30:03.173] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:30:03.173] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:30:03.173] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:03.173] (PreFillP1                        :   6) @Run
[2018-01-12 19:30:03.173] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:30:03.223] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:30:03.223] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:30:03.223] (PreFillP2                        :   7) @Run
[2018-01-12 19:30:03.223] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:30:03.323] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:03.613] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:03.663] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:03.663] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:03.953] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:04.003] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:04.003] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:04.153] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:04.203] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:04.203] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:04.353] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:04.403] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:04.403] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:04.573] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:04.623] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:04.623] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:04.913] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:04.963] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:04.963] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:05.213] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:05.263] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:05.263] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:05.413] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:05.463] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:30:05.463] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:05.513] (PreFillP1                        :   6) @Stop
[2018-01-12 19:30:05.633] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:05.683] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:30:05.683] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:05.973] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:06.023] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:30:06.023] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:06.173] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:06.223] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:30:06.223] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:06.323] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:06.373] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:30:06.373] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:06.523] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:06.573] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:30:06.573] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:06.783] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:30:06.833] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:30:06.833] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:30:06.833] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:30:06.873] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:30:06.883] (PreFillP2                        :   7) @Stop
[2018-01-12 19:30:06.923] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:30:06.923] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:30:06.923] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:30:06.943] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:30:06.993] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:30:07.013] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:30:07.263] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:30:07.263] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:30:07.263] (Flush Capillary                  :   9) @Run
[2018-01-12 19:30:07.263] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:30:07.313] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:30:07.313] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:30:07.313] (Flush Singulator                 :  10) @Run
[2018-01-12 19:30:07.313] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:30:07.413] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:07.663] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:30:07.713] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:07.713] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:07.863] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:30:07.913] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:07.913] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:08.083] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:30:08.133] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:08.133] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:08.423] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:30:08.473] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:08.473] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:08.723] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:30:08.773] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:08.773] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:08.923] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:30:08.973] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:08.973] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:09.143] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:30:09.193] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:09.193] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:09.483] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:30:09.533] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:30:09.533] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:09.583] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:30:09.683] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:30:09.783] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:30:09.833] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:30:09.833] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:30:09.833] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:30:09.873] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:30:09.893] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:30:09.893] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:30:09.893] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:30:09.933] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:09.983] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:30:10.093] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:30:10.343] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:30:10.343] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:10.343] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:30:10.343] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:30:10.393] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:30:10.393] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:30:10.393] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:30:10.393] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:30:10.493] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:10.763] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:10.813] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:10.813] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:11.133] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:11.183] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:11.183] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:11.433] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:11.483] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:11.483] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:11.633] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:11.683] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:11.683] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:11.853] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:11.903] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:30:11.903] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:11.953] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:30:12.193] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:12.243] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:30:12.243] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:12.293] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:30:12.393] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:30:12.443] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:30:12.443] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:30:12.443] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:30:12.493] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:30:12.493] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:30:12.493] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:30:12.493] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:30:12.493] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:30:12.493] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:30:12.493] (Prefill before Flush             :  14) @Run
[2018-01-12 19:30:12.493] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:30:12.493] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:30:12.493] (PreFillP1                        :  15) @Run
[2018-01-12 19:30:12.493] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:30:12.543] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:30:12.543] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:30:12.543] (PreFillP2                        :  16) @Run
[2018-01-12 19:30:12.543] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:30:12.643] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:12.933] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:30:12.983] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:12.983] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:13.173] (PreFillP1                        :  15) @Stop
[2018-01-12 19:30:13.273] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:30:13.323] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:30:13.323] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:13.373] (PreFillP2                        :  16) @Stop
[2018-01-12 19:30:13.473] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:30:13.523] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:30:13.523] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:30:13.523] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:30:13.543] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:30:13.563] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:30:13.563] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:29:19.743] (Detector                         :   2) @Stop
[2018-01-12 19:30:13.663] ** STARTING E06 MAIN ROUTINE **
[2018-01-12 19:30:13.663] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:30:13.663] (Main Well                        :   0) @Run
[2018-01-12 19:30:13.663] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:30:13.673] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:30:13.673] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:30:13.673] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:30:13.673] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:30:13.673] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:30:13.673] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:30:13.673] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:30:13.673] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:30:13.673] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:30:14.253] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:30:14.253] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:30:14.273] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:30:14.273] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:30:14.413] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:30:14.413] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:30:14.413] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:30:14.413] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:30:14.413] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:30:14.413] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:30:14.413] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:30:14.413] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:30:14.413] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:30:14.433] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:30:14.483] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:30:14.503] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:30:14.753] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:30:14.753] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:30:14.753] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:30:14.753] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:30:14.803] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:30:14.803] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:30:14.803] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:30:14.803] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:30:14.903] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:15.173] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:30:15.223] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:30:15.223] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:15.533] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:30:15.583] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:30:15.583] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:15.833] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:30:15.883] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:30:15.883] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:16.033] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:30:16.083] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:30:16.083] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:16.133] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:30:16.253] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:30:16.303] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:30:16.303] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:16.353] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:30:16.593] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:30:16.643] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:30:16.643] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:30:16.643] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:30:16.643] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:30:16.643] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:30:16.703] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:30:16.753] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:30:16.813] (Main Well                        :   0) Move to Well 54 with z-offset of 2540 um (Wait)
[2018-01-12 19:30:20.013] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:20.253] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:30:20.303] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:30:20.303] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:20.403] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:30:20.453] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:30:20.453] (Main Well                        :   0) Stop Pump
[2018-01-12 19:30:20.493] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:30:20.553] (Main Well                        :   0) Move to Well 54 with z-offset of 310 um (Wait)
[2018-01-12 19:30:30.893] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:31.133] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:30:31.183] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:30:31.183] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:30:31.183] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:30:31.183] (Pickup Sample                    :  21) @Run
[2018-01-12 19:30:31.183] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:30:35.853] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:30:38.473] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:30:38.553] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:30:38.753] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:38.853] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:38.903] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:38.903] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:39.003] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:39.053] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:39.053] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:39.153] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:39.203] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:39.203] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:39.313] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:39.363] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:39.363] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:39.553] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:39.603] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:39.603] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:39.703] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:39.753] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:39.753] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:39.853] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:39.903] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:39.903] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:40.003] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:40.053] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:40.053] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:40.263] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:40.313] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:40.313] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:40.413] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:40.463] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:40.463] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:40.563] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:40.613] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:40.613] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:40.713] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:40.763] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:40.763] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:40.973] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:41.023] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:41.023] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:41.123] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:41.173] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:41.173] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:41.273] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:41.323] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:41.323] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:41.423] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:41.473] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:41.473] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:41.683] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:41.733] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:41.733] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:41.833] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:41.883] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:41.883] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:41.983] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:42.033] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:42.033] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:42.133] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:42.183] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:42.183] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:42.393] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:42.443] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:42.443] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:42.543] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:42.593] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:42.593] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:42.693] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:42.743] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:42.743] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:42.843] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:42.893] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:42.893] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:43.103] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:43.153] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:43.153] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:43.253] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:43.303] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:43.303] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:43.403] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:43.453] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:43.453] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:43.553] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:43.603] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:43.603] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:43.813] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:43.863] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:43.863] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:43.963] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:44.013] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:44.013] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:44.113] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:44.163] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:44.163] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:44.263] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:44.313] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:44.313] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:44.523] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:44.573] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:44.573] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:44.673] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:44.723] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:44.723] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:44.823] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:44.873] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:44.873] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:44.973] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:45.023] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:45.023] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:45.233] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:45.283] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:45.283] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:45.383] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:45.433] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:45.433] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:45.533] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:45.583] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:45.583] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:45.683] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:45.733] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:45.733] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:45.943] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:45.993] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:45.993] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:46.093] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:46.143] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:46.143] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:46.243] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:46.293] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:46.293] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:46.393] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:46.443] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:46.443] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:46.653] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:46.703] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:46.703] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:46.803] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:46.853] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:46.853] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:46.953] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:47.003] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:47.003] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:47.103] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:47.153] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:47.153] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:47.363] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:47.413] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:47.413] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:47.513] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:47.563] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:47.563] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:47.663] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:47.713] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:47.713] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:47.813] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:47.863] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:30:47.863] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:30:48.073] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:48.123] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:30:48.123] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:30:48.223] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:30:48.273] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:30:48.273] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:30:48.273] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:30:48.583] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:30:48.653] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:30:48.903] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:30:48.923] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:30:48.973] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:30:48.973] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:30:48.973] (Singulate Sample                 :  22) @Run
[2018-01-12 19:30:48.973] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:30:48.973] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:30:48.973] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:30:49.033] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:30:49.083] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:30:49.143] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:30:49.243] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_E06_RAW.qlb"
[2018-01-12 19:30:49.353] (Detector                         :   2) @Run
[2018-01-12 19:30:49.353] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:31:29.253] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:31:30.293] (Detector                         :   2) @Stop
[2018-01-12 19:31:30.453] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:31:30.453] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:30.553] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:31:30.603] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:31:30.603] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:30.703] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:31:30.753] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:31:30.753] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:31:30.753] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:31:30.973] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:31:30.973] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:31:30.973] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:31:30.973] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:31:30.973] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:31:30.973] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:31:30.973] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:30.973] (PreFillP1                        :  24) @Run
[2018-01-12 19:31:30.973] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:31:31.023] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:31:31.023] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:31:31.023] (PreFillP2                        :  25) @Run
[2018-01-12 19:31:31.023] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:31:31.123] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:31.393] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:31.443] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:31:31.443] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:31.613] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:31.663] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:31:31.663] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:31.973] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:32.023] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:31:32.023] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:32.273] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:32.323] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:31:32.323] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:32.473] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:32.523] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:31:32.523] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:32.693] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:32.743] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:31:32.743] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:33.033] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:33.083] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:31:33.083] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:33.333] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:33.383] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:31:33.383] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:33.533] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:33.583] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:31:33.583] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:33.753] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:33.803] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:31:33.803] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:34.093] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:34.143] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:31:34.143] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:34.193] (PreFillP1                        :  24) @Stop
[2018-01-12 19:31:34.393] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:34.443] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:31:34.443] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:34.543] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:34.593] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:31:34.593] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:34.913] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:31:34.963] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:31:34.963] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:31:34.963] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:31:34.973] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:31:34.973] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:31:34.973] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:31:35.013] (PreFillP2                        :  25) @Stop
[2018-01-12 19:31:35.033] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:31:35.083] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:31:35.103] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:31:35.353] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:31:35.353] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:31:35.353] (Flush Capillary                  :  27) @Run
[2018-01-12 19:31:35.353] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:31:35.403] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:31:35.403] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:31:35.403] (Flush Singulator                 :  28) @Run
[2018-01-12 19:31:35.403] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:31:35.503] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:35.683] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:31:35.733] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:31:35.733] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:35.983] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:31:36.033] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:31:36.033] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:36.343] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:31:36.393] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:31:36.393] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:36.643] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:31:36.693] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:31:36.693] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:36.843] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:31:36.893] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:31:36.893] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:36.943] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:31:37.063] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:31:37.113] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:31:37.113] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:31:37.113] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:31:37.123] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:31:37.163] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:31:37.323] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:31:37.323] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:31:37.323] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:31:37.343] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:31:37.393] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:31:37.413] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:31:37.663] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:31:37.663] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:31:37.663] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:31:37.663] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:31:37.713] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:31:37.713] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:31:37.713] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:31:37.713] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:31:37.813] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:38.103] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:31:38.153] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:31:38.153] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:38.443] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:31:38.493] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:31:38.493] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:38.543] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:31:38.643] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:31:38.693] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:31:38.693] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:31:38.693] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:31:38.723] (Main Well                        :   0) Stop Pump
[2018-01-12 19:31:38.743] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:31:38.783] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:31:38.783] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:31:38.783] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:31:38.823] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:31:38.873] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:31:38.993] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:31:39.243] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:31:39.243] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:31:39.243] (Flush Capillary                  :  33) @Run
[2018-01-12 19:31:39.243] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:31:39.293] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:31:39.293] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:31:39.293] (Flush Singulator                 :  34) @Run
[2018-01-12 19:31:39.293] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:31:39.393] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:39.663] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:31:39.713] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:31:39.713] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:40.023] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:31:40.073] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:31:40.073] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:40.123] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:31:40.223] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:31:40.323] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:31:40.373] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:31:40.373] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:31:40.373] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:31:40.383] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:31:40.403] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:31:40.403] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:31:40.403] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:31:40.423] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:31:40.473] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:31:40.603] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:31:40.853] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:31:40.853] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:31:40.853] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:31:40.853] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:31:40.903] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:31:40.903] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:31:40.903] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:31:40.903] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:31:41.003] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:41.273] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:31:41.323] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:31:41.323] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:41.633] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:31:41.683] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:31:41.683] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:41.733] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:31:41.833] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:31:41.933] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:31:41.983] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:31:41.983] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:31:41.983] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:31:42.003] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:31:42.023] (Main Well                        :   0) Stop routine
[2018-01-12 19:31:42.023] (Main Well                        :   0) @Stop
[2018-01-12 19:31:42.263] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:31:42.263] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:31:42.273] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:31:42.273] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:31:42.273] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:31:42.273] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:31:44.263] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:31:44.263] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:31:44.263] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:31:44.263] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:31:44.303] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:31:44.303] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:31:30.293] (Detector                         :  17) @Stop
[2018-01-12 19:31:48.453] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:31:48.453] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:31:48.453] (MainPre Routine                  :   0) @Run
[2018-01-12 19:31:48.453] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:31:54.573] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:31:54.573] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:31:54.573] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:31:55.213] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:31:55.213] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:31:55.223] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:31:56.953] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:31:56.953] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:31:56.953] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:31:57.113] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:31:57.163] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:31:57.183] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:31:57.433] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:31:57.433] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:31:57.433] (Initialize P1                    :   3) @Run
[2018-01-12 19:31:57.433] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:31:57.483] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:31:57.483] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:31:57.483] (Initialize P2                    :   4) @Run
[2018-01-12 19:31:57.483] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:31:57.663] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:57.893] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:58.013] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:31:58.063] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:58.063] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:58.113] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:31:58.163] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:58.163] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:58.353] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:31:58.403] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:58.403] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:58.453] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:31:58.503] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:58.503] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:58.553] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:31:58.603] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:58.603] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:58.653] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:31:58.703] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:58.703] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:58.753] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:31:58.803] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:58.803] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:58.853] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:31:58.903] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:58.903] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:58.983] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:31:59.033] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:59.033] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:59.223] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:31:59.273] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:59.273] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:59.323] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:31:59.373] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:59.373] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:59.423] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:31:59.473] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:59.473] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:59.523] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:31:59.573] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:59.573] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:59.623] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:31:59.673] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:59.673] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:31:59.723] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:31:59.773] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:59.773] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:31:59.843] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:31:59.893] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:31:59.893] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:00.083] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:32:00.133] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:32:00.133] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:32:00.133] (Initialize P1                    :   3) @Stop
[2018-01-12 19:32:00.183] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:32:00.233] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:32:00.233] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:00.333] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:32:00.383] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:32:00.383] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:32:00.383] (Initialize P2                    :   4) @Stop
[2018-01-12 19:32:00.483] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:32:00.683] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:32:00.703] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:32:00.703] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:32:00.703] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:32:00.703] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:32:00.703] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:00.703] (PreFillP1                        :   6) @Run
[2018-01-12 19:32:00.703] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:32:00.753] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:32:00.753] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:32:00.753] (PreFillP2                        :   7) @Run
[2018-01-12 19:32:00.753] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:32:00.853] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:01.123] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:01.173] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:01.173] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:01.343] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:01.393] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:01.393] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:01.683] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:01.733] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:01.733] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:01.983] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:02.033] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:02.033] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:02.183] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:02.233] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:02.233] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:02.403] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:02.453] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:02.453] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:02.743] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:02.793] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:02.793] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:02.943] (PreFillP1                        :   6) @Stop
[2018-01-12 19:32:03.043] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:03.093] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:32:03.093] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:03.243] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:03.293] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:32:03.293] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:03.503] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:03.553] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:32:03.553] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:03.703] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:03.753] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:32:03.753] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:03.853] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:03.903] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:32:03.903] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:04.053] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:04.103] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:32:04.103] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:04.313] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:04.363] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:32:04.363] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:32:04.363] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:32:04.403] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:32:04.413] (PreFillP2                        :   7) @Stop
[2018-01-12 19:32:04.453] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:32:04.453] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:32:04.453] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:32:04.473] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:04.523] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:32:04.543] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:32:04.793] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:32:04.793] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:04.793] (Flush Capillary                  :   9) @Run
[2018-01-12 19:32:04.793] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:32:04.843] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:32:04.843] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:32:04.843] (Flush Singulator                 :  10) @Run
[2018-01-12 19:32:04.843] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:32:04.943] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:05.193] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:05.243] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:05.243] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:05.393] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:05.443] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:05.443] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:05.613] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:05.663] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:05.663] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:05.953] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:06.003] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:06.003] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:06.253] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:06.303] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:06.303] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:06.453] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:06.503] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:06.503] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:06.673] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:06.723] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:06.723] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:07.013] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:07.063] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:32:07.063] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:07.113] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:32:07.213] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:32:07.313] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:07.363] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:32:07.363] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:32:07.363] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:32:07.403] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:32:07.423] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:32:07.423] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:32:07.423] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:32:07.463] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:07.513] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:32:07.623] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:32:07.873] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:32:07.873] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:07.873] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:32:07.873] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:32:07.923] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:32:07.923] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:32:07.923] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:32:07.923] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:32:08.023] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:08.293] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:08.343] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:08.343] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:08.653] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:08.703] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:08.703] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:08.953] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:09.003] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:09.003] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:09.153] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:09.203] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:09.203] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:09.373] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:09.423] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:09.423] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:09.473] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:32:09.713] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:09.763] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:32:09.763] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:09.813] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:32:09.913] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:09.963] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:32:09.963] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:32:09.963] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:32:09.973] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:32:09.973] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:32:09.973] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:32:09.973] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:32:09.973] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:32:09.973] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:32:09.973] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:09.973] (PreFillP1                        :   6) @Run
[2018-01-12 19:32:09.973] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:32:10.023] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:32:10.023] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:32:10.023] (PreFillP2                        :   7) @Run
[2018-01-12 19:32:10.023] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:32:10.123] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:10.413] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:10.463] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:10.463] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:10.753] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:10.803] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:10.803] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:10.953] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:11.003] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:11.003] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:11.153] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:11.203] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:11.203] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:11.373] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:11.423] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:11.423] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:11.713] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:11.763] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:11.763] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:12.013] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:12.063] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:12.063] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:12.213] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:12.263] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:32:12.263] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:12.313] (PreFillP1                        :   6) @Stop
[2018-01-12 19:32:12.433] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:12.483] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:32:12.483] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:12.773] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:12.823] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:32:12.823] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:12.973] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:13.023] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:32:13.023] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:13.123] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:13.173] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:32:13.173] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:13.323] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:13.373] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:32:13.373] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:13.583] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:32:13.633] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:32:13.633] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:32:13.633] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:32:13.673] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:32:13.683] (PreFillP2                        :   7) @Stop
[2018-01-12 19:32:13.723] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:32:13.723] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:32:13.723] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:32:13.743] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:13.793] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:32:13.813] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:32:14.063] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:32:14.063] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:14.063] (Flush Capillary                  :   9) @Run
[2018-01-12 19:32:14.063] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:32:14.113] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:32:14.113] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:32:14.113] (Flush Singulator                 :  10) @Run
[2018-01-12 19:32:14.113] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:32:14.213] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:14.463] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:14.513] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:14.513] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:14.663] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:14.713] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:14.713] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:14.883] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:14.933] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:14.933] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:15.223] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:15.273] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:15.273] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:15.523] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:15.573] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:15.573] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:15.723] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:15.773] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:15.773] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:15.943] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:15.993] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:15.993] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:16.283] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:16.333] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:32:16.333] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:16.383] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:32:16.483] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:32:16.583] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:32:16.633] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:32:16.633] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:32:16.633] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:32:16.673] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:32:16.693] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:32:16.693] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:32:16.693] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:32:16.733] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:16.783] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:32:16.893] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:32:17.143] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:32:17.143] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:17.143] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:32:17.143] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:32:17.193] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:32:17.193] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:32:17.193] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:32:17.193] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:32:17.293] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:17.563] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:17.613] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:17.613] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:17.923] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:17.973] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:17.973] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:18.223] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:18.273] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:18.273] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:18.423] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:18.473] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:18.473] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:18.643] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:18.693] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:32:18.693] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:18.743] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:32:18.993] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:19.043] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:32:19.043] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:19.093] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:32:19.193] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:32:19.243] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:32:19.243] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:32:19.243] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:32:19.293] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:32:19.293] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:32:19.293] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:32:19.293] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:32:19.293] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:32:19.293] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:32:19.293] (Prefill before Flush             :  14) @Run
[2018-01-12 19:32:19.293] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:32:19.293] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:32:19.293] (PreFillP1                        :  15) @Run
[2018-01-12 19:32:19.293] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:32:19.343] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:32:19.343] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:32:19.343] (PreFillP2                        :  16) @Run
[2018-01-12 19:32:19.343] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:32:19.443] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:19.733] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:32:19.783] (Prefill before Flush             :  14) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:19.783] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:19.973] (PreFillP1                        :  15) @Stop
[2018-01-12 19:32:20.073] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:32:20.123] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:32:20.123] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:20.173] (PreFillP2                        :  16) @Stop
[2018-01-12 19:32:20.273] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:32:20.323] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:32:20.323] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:32:20.323] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:32:20.343] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:32:20.363] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:32:20.363] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:31:30.293] (Detector                         :   2) @Stop
[2018-01-12 19:32:20.533] ** STARTING F06 MAIN ROUTINE **
[2018-01-12 19:32:20.533] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:32:20.533] (Main Well                        :   0) @Run
[2018-01-12 19:32:20.533] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:32:20.533] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:32:20.533] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:32:20.533] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:32:20.533] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:32:20.533] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:32:20.533] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:32:20.533] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:32:20.533] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:32:20.533] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:32:21.053] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:32:21.053] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:32:21.083] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:32:21.213] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:32:21.213] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:32:21.213] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:32:21.213] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:32:21.213] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:32:21.213] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:32:21.213] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:32:21.213] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:32:21.213] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:32:21.213] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:32:21.233] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:32:21.283] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:32:21.303] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:32:21.553] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:32:21.553] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:32:21.553] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:32:21.553] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:32:21.603] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:32:21.603] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:32:21.603] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:32:21.603] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:32:21.703] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:21.973] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:32:22.023] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:32:22.023] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:22.333] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:32:22.383] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:32:22.383] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:22.633] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:32:22.683] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:32:22.683] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:22.833] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:32:22.883] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:32:22.883] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:22.933] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:32:23.053] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:32:23.103] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:32:23.103] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:23.153] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:32:23.393] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:32:23.443] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:32:23.443] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:32:23.443] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:32:23.443] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:32:23.443] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:32:23.503] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:32:23.553] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:32:23.613] (Main Well                        :   0) Move to Well 66 with z-offset of 2540 um (Wait)
[2018-01-12 19:32:26.473] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:26.713] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:32:26.763] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:32:26.763] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:26.863] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:32:26.913] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:32:26.913] (Main Well                        :   0) Stop Pump
[2018-01-12 19:32:26.953] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:32:27.013] (Main Well                        :   0) Move to Well 66 with z-offset of 310 um (Wait)
[2018-01-12 19:32:37.653] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:37.893] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:32:37.943] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:32:37.943] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:32:37.943] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:32:37.943] (Pickup Sample                    :  21) @Run
[2018-01-12 19:32:37.943] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:32:42.613] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:32:45.233] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:32:45.313] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:32:45.513] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:45.613] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:45.663] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:45.663] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:45.763] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:45.813] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:45.813] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:45.913] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:45.963] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:45.963] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:46.073] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:46.123] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:46.123] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:46.313] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:46.363] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:46.363] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:46.463] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:46.513] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:46.513] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:46.613] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:46.663] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:46.663] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:46.763] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:46.813] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:46.813] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:47.033] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:47.083] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:47.083] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:47.183] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:47.233] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:47.233] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:47.333] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:47.383] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:47.383] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:47.483] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:47.533] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:47.533] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:47.743] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:47.793] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:47.793] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:47.893] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:47.943] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:47.943] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:48.043] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:48.093] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:48.093] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:48.193] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:48.243] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:48.243] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:48.453] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:48.503] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:48.503] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:48.603] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:48.653] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:48.653] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:48.753] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:48.803] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:48.803] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:48.903] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:48.953] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:48.953] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:49.163] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:49.213] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:49.213] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:49.313] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:49.363] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:49.363] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:49.463] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:49.513] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:49.513] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:49.613] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:49.663] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:49.663] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:49.873] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:49.923] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:49.923] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:50.023] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:50.073] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:50.073] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:50.173] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:50.223] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:50.223] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:50.323] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:50.373] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:50.373] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:50.583] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:50.633] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:50.633] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:50.733] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:50.783] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:50.783] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:50.883] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:50.933] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:50.933] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:51.033] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:51.083] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:51.083] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:51.293] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:51.343] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:51.343] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:51.443] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:51.493] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:51.493] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:51.593] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:51.643] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:51.643] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:51.743] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:51.793] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:51.793] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:52.013] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:52.063] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:52.063] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:52.163] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:52.213] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:52.213] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:52.313] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:52.363] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:52.363] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:52.463] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:52.513] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:52.513] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:52.723] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:52.773] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:52.773] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:52.873] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:52.923] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:52.923] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:53.023] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:53.073] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:53.073] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:53.173] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:53.223] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:53.223] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:53.433] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:53.483] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:53.483] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:53.583] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:53.633] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:53.633] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:53.733] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:53.783] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:53.783] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:53.883] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:53.933] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:53.933] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:54.143] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:54.193] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:54.193] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:54.293] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:54.343] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:54.343] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:54.443] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:54.493] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:54.493] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:54.593] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:54.643] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:32:54.643] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:32:54.853] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:54.903] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:32:54.903] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:32:55.003] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:32:55.053] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:32:55.053] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:32:55.053] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:32:55.343] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:32:55.433] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:32:55.683] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:32:55.703] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:32:55.753] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:32:55.753] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:32:55.753] (Singulate Sample                 :  22) @Run
[2018-01-12 19:32:55.753] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:32:55.753] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:32:55.753] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:32:55.813] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:32:55.863] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:32:55.923] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:32:56.023] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_F06_RAW.qlb"
[2018-01-12 19:32:56.123] (Detector                         :   2) @Run
[2018-01-12 19:32:56.123] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:33:36.023] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:33:37.043] (Detector                         :   2) @Stop
[2018-01-12 19:33:37.223] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:33:37.223] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:33:37.323] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:33:37.373] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:33:37.373] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:37.473] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:33:37.523] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:33:37.523] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:33:37.523] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:33:37.753] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:33:37.753] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:33:37.753] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:33:37.753] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:33:37.753] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:33:37.753] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:33:37.753] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:37.753] (PreFillP1                        :  24) @Run
[2018-01-12 19:33:37.753] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:33:37.803] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:33:37.803] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:33:37.803] (PreFillP2                        :  25) @Run
[2018-01-12 19:33:37.803] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:33:37.903] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:38.173] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:38.223] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:33:38.223] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:38.393] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:38.443] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:33:38.443] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:38.743] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:38.793] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:33:38.793] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:39.043] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:39.093] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:33:39.093] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:39.243] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:39.293] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:33:39.293] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:39.463] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:39.513] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:33:39.513] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:39.803] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:39.853] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:33:39.853] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:40.103] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:40.153] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:33:40.153] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:40.303] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:40.353] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:33:40.353] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:40.523] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:40.573] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:33:40.573] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:40.863] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:40.913] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:33:40.913] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:33:40.963] (PreFillP1                        :  24) @Stop
[2018-01-12 19:33:41.163] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:41.213] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:33:41.213] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:33:41.313] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:41.363] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:33:41.363] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:33:41.533] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:33:41.583] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:33:41.583] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:33:41.583] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:33:41.603] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:33:41.603] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:33:41.603] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:33:41.693] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:33:41.743] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:33:41.793] (PreFillP2                        :  25) @Stop
[2018-01-12 19:33:41.813] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:33:42.063] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:33:42.063] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:33:42.063] (Flush Capillary                  :  27) @Run
[2018-01-12 19:33:42.063] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:33:42.113] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:33:42.113] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:33:42.113] (Flush Singulator                 :  28) @Run
[2018-01-12 19:33:42.113] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:33:42.213] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:42.503] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:33:42.553] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:33:42.553] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:42.843] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:33:42.893] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:33:42.893] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:43.043] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:33:43.093] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:33:43.093] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:43.243] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:33:43.293] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:33:43.293] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:43.463] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:33:43.513] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:33:43.513] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:33:43.563] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:33:43.803] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:33:43.853] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:33:43.853] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:33:43.853] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:33:43.903] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:33:43.903] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:33:43.923] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:33:43.923] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:33:43.923] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:33:43.943] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:33:43.993] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:33:44.013] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:33:44.263] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:33:44.263] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:33:44.263] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:33:44.263] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:33:44.313] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:33:44.313] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:33:44.313] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:33:44.313] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:33:44.413] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:44.583] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:33:44.633] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:33:44.633] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:44.883] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:33:44.933] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:33:44.933] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:45.243] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:33:45.293] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:33:45.293] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:33:45.343] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:33:45.443] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:33:45.543] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:33:45.593] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:33:45.593] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:33:45.593] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:33:45.623] (Main Well                        :   0) Stop Pump
[2018-01-12 19:33:45.663] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:33:45.663] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:33:45.663] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:33:45.703] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:33:45.753] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:33:45.863] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:33:46.113] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:33:46.113] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:33:46.113] (Flush Capillary                  :  33) @Run
[2018-01-12 19:33:46.113] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:33:46.163] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:33:46.163] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:33:46.163] (Flush Singulator                 :  34) @Run
[2018-01-12 19:33:46.163] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:33:46.263] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:46.533] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:33:46.583] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:33:46.583] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:46.903] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:33:46.953] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:33:46.953] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:33:47.003] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:33:47.103] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:33:47.203] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:33:47.253] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:33:47.253] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:33:47.253] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:33:47.263] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:33:47.283] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:33:47.283] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:33:47.283] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:33:47.303] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:33:47.353] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:33:47.483] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:33:47.733] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:33:47.733] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:33:47.733] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:33:47.733] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:33:47.783] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:33:47.783] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:33:47.783] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:33:47.783] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:33:47.883] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:48.153] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:33:48.203] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:33:48.203] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:33:48.513] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:33:48.563] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:33:48.563] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:33:48.613] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:33:48.713] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:33:48.813] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:33:48.863] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:33:48.863] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:33:48.863] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:33:48.883] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:33:48.903] (Main Well                        :   0) Stop routine
[2018-01-12 19:33:48.903] (Main Well                        :   0) @Stop
[2018-01-12 19:33:49.103] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:33:49.103] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:33:49.123] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:33:49.123] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:33:49.133] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:33:49.133] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:33:51.103] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:33:51.103] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:33:51.103] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:33:51.103] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:33:51.143] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:33:51.143] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:33:37.043] (Detector                         :  17) @Stop
[2018-01-12 19:33:55.873] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:33:55.873] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:33:55.873] (MainPre Routine                  :   0) @Run
[2018-01-12 19:33:55.873] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:34:01.813] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:34:01.813] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:34:01.813] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:34:02.453] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:34:02.453] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:34:02.463] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:34:04.193] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:34:04.193] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:34:04.193] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:34:04.353] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:34:04.403] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:34:04.423] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:34:04.673] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:34:04.673] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:34:04.673] (Initialize P1                    :   3) @Run
[2018-01-12 19:34:04.673] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:34:04.723] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:34:04.723] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:34:04.723] (Initialize P2                    :   4) @Run
[2018-01-12 19:34:04.723] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:34:04.903] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:05.133] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:05.253] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:34:05.303] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:05.303] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:05.353] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:34:05.403] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:05.403] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:05.593] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:34:05.643] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:05.643] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:05.693] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:34:05.743] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:05.743] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:05.793] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:34:05.843] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:05.843] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:05.893] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:34:05.943] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:05.943] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:05.993] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:34:06.043] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:06.043] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:06.093] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:34:06.143] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:06.143] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:06.213] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:34:06.263] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:06.263] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:06.453] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:34:06.503] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:06.503] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:06.553] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:34:06.603] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:06.603] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:06.653] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:34:06.703] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:06.703] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:06.753] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:34:06.803] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:06.803] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:06.853] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:34:06.903] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:06.903] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:06.953] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:34:07.003] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:07.003] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:07.073] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:34:07.123] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:07.123] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:07.313] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:34:07.363] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:07.363] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:07.413] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:34:07.463] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:34:07.463] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:07.513] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:34:07.563] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:34:07.563] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:34:07.563] (Initialize P1                    :   3) @Stop
[2018-01-12 19:34:07.613] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:34:07.663] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:34:07.663] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:34:07.663] (Initialize P2                    :   4) @Stop
[2018-01-12 19:34:07.923] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:34:08.123] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:34:08.143] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:34:08.143] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:34:08.143] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:34:08.143] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:34:08.143] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:08.143] (PreFillP1                        :   6) @Run
[2018-01-12 19:34:08.143] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:34:08.193] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:34:08.193] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:34:08.193] (PreFillP2                        :   7) @Run
[2018-01-12 19:34:08.193] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:34:08.293] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:08.563] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:08.613] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:08.613] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:08.923] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:08.973] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:08.973] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:09.223] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:09.273] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:09.273] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:09.423] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:09.473] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:09.473] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:09.783] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:09.833] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:09.833] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:10.083] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:10.133] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:10.133] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:10.283] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:10.333] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:34:10.333] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:10.383] (PreFillP1                        :   6) @Stop
[2018-01-12 19:34:10.503] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:10.553] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:34:10.553] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:10.843] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:10.893] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:34:10.893] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:11.043] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:11.093] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:34:11.093] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:11.193] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:11.243] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:34:11.243] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:11.393] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:11.443] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:34:11.443] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:11.653] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:11.703] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:34:11.703] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:11.753] (PreFillP2                        :   7) @Stop
[2018-01-12 19:34:11.853] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:11.903] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:34:11.903] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:34:11.903] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:34:11.943] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:34:11.983] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:34:11.983] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:34:11.983] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:34:12.003] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:12.053] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:34:12.073] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:34:12.323] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:34:12.323] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:12.323] (Flush Capillary                  :   9) @Run
[2018-01-12 19:34:12.323] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:34:12.373] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:34:12.373] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:34:12.373] (Flush Singulator                 :  10) @Run
[2018-01-12 19:34:12.373] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:34:12.473] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:12.743] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:12.793] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:12.793] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:13.103] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:13.153] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:13.153] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:13.403] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:13.453] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:13.453] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:13.603] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:13.653] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:13.653] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:13.823] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:13.873] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:13.873] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:14.163] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:14.213] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:14.213] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:14.463] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:14.513] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:34:14.513] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:14.563] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:34:14.663] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:14.713] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:34:14.713] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:34:14.713] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:34:14.733] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:34:14.763] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:34:14.803] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:34:14.803] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:34:14.803] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:34:14.963] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:15.013] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:34:15.033] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:34:15.283] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:34:15.283] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:15.283] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:34:15.283] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:34:15.333] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:34:15.333] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:34:15.333] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:34:15.333] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:34:15.433] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:15.703] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:15.753] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:15.753] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:16.063] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:16.113] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:16.113] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:16.363] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:16.413] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:16.413] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:16.563] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:16.613] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:16.613] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:16.923] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:16.973] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:34:16.973] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:17.023] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:34:17.123] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:34:17.223] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:17.273] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:34:17.273] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:34:17.273] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:34:17.303] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:34:17.303] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:34:17.303] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:34:17.303] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:34:17.303] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:34:17.303] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:34:17.303] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:17.303] (PreFillP1                        :   6) @Run
[2018-01-12 19:34:17.303] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:34:17.353] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:34:17.353] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:34:17.353] (PreFillP2                        :   7) @Run
[2018-01-12 19:34:17.353] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:34:17.453] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:17.883] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:17.933] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:17.933] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:18.083] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:18.133] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:18.133] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:18.283] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:18.333] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:18.333] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:18.503] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:18.553] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:18.553] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:18.843] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:18.893] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:18.893] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:19.143] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:19.193] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:19.193] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:19.343] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:19.393] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:19.393] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:19.563] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:19.613] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:34:19.613] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:19.663] (PreFillP1                        :   6) @Stop
[2018-01-12 19:34:19.903] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:19.953] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:34:19.953] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:20.103] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:20.153] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:34:20.153] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:20.253] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:20.303] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:34:20.303] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:20.473] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:20.523] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:34:20.523] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:20.713] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:20.763] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:34:20.763] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:20.913] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:20.963] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:34:20.963] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:21.063] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:34:21.115] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:34:21.115] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:34:21.115] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:34:21.155] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:34:21.165] (PreFillP2                        :   7) @Stop
[2018-01-12 19:34:21.225] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:34:21.225] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:34:21.225] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:34:21.385] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:21.435] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:34:21.455] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:34:21.705] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:34:21.705] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:21.705] (Flush Capillary                  :   9) @Run
[2018-01-12 19:34:21.705] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:34:21.755] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:34:21.755] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:34:21.755] (Flush Singulator                 :  10) @Run
[2018-01-12 19:34:21.755] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:34:21.855] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:22.125] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:22.175] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:22.175] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:22.485] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:22.535] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:22.535] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:22.785] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:22.835] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:22.835] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:22.985] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:23.035] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:23.035] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:23.345] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:23.395] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:23.395] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:23.645] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:23.695] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:23.695] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:23.845] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:23.895] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:34:23.895] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:23.945] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:34:24.065] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:34:24.115] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:34:24.115] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:34:24.115] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:34:24.125] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:34:24.165] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:34:24.325] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:34:24.325] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:34:24.325] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:34:24.345] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:24.395] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:34:24.415] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:34:24.665] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:34:24.665] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:24.665] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:34:24.665] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:34:24.715] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:34:24.715] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:34:24.715] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:34:24.715] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:34:24.815] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:25.105] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:25.155] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:25.155] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:25.445] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:25.495] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:25.495] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:25.645] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:25.695] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:25.695] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:25.845] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:25.895] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:34:25.895] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:26.205] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:26.255] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:34:26.255] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:26.305] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:34:26.405] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:34:26.505] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:34:26.555] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:34:26.555] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:34:26.555] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:34:26.575] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:34:26.575] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:34:26.575] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:34:26.575] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:34:26.575] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:34:26.575] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:34:26.575] (Prefill before Flush             :  14) @Run
[2018-01-12 19:34:26.575] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:34:26.575] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:34:26.575] (PreFillP1                        :  15) @Run
[2018-01-12 19:34:26.575] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:34:26.625] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:34:26.625] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:34:26.625] (PreFillP2                        :  16) @Run
[2018-01-12 19:34:26.625] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:34:26.725] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:27.155] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:34:27.205] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:34:27.205] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:27.255] (PreFillP1                        :  15) @Stop
[2018-01-12 19:34:27.355] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:34:27.405] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:34:27.405] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:34:27.405] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:34:27.425] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:34:27.455] (PreFillP2                        :  16) @Stop
[2018-01-12 19:34:27.475] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:34:27.475] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:33:37.043] (Detector                         :   2) @Stop
[2018-01-12 19:34:27.945] ** STARTING G06 MAIN ROUTINE **
[2018-01-12 19:34:27.945] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:34:27.955] (Main Well                        :   0) @Run
[2018-01-12 19:34:27.955] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:34:27.955] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:34:27.955] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:34:27.955] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:34:27.955] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:34:27.955] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:34:27.955] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:34:27.955] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:34:27.955] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:34:27.955] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:34:28.455] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:34:28.455] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:34:28.505] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:34:28.615] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:34:28.615] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:34:28.615] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:34:28.615] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:34:28.615] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:34:28.615] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:34:28.615] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:34:28.615] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:34:28.615] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:34:28.615] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:34:28.635] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:34:28.685] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:34:28.705] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:34:28.955] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:34:28.955] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:34:28.955] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:34:28.955] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:34:29.005] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:34:29.005] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:34:29.005] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:34:29.005] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:34:29.105] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:29.375] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:34:29.425] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:34:29.425] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:29.735] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:34:29.785] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:34:29.785] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:30.035] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:34:30.085] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:34:30.085] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:30.235] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:34:30.285] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:34:30.285] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:30.335] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:34:30.455] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:34:30.505] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:34:30.505] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:30.555] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:34:30.795] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:34:30.845] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:34:30.845] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:34:30.845] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:34:30.845] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:34:30.845] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:34:30.915] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:34:30.965] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:34:31.025] (Main Well                        :   0) Move to Well 78 with z-offset of 2540 um (Wait)
[2018-01-12 19:34:34.205] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:34:34.445] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:34:34.495] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:34:34.495] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:34.595] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:34:34.645] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:34:34.645] (Main Well                        :   0) Stop Pump
[2018-01-12 19:34:34.685] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:34:34.745] (Main Well                        :   0) Move to Well 78 with z-offset of 310 um (Wait)
[2018-01-12 19:34:45.505] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:45.745] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:34:45.795] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:34:45.795] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:34:45.795] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:34:45.795] (Pickup Sample                    :  21) @Run
[2018-01-12 19:34:45.795] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:34:50.465] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:34:53.265] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:34:53.345] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:34:53.545] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:53.645] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:53.695] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:53.695] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:53.795] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:53.845] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:53.845] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:53.955] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:54.005] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:54.005] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:54.105] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:54.155] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:54.155] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:54.345] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:54.395] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:54.395] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:54.495] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:54.545] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:54.545] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:54.645] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:54.695] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:54.695] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:54.795] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:54.845] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:54.845] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:55.055] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:55.105] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:55.105] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:55.205] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:55.255] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:55.255] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:55.355] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:55.405] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:55.405] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:55.505] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:55.555] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:55.555] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:55.765] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:55.815] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:55.815] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:55.915] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:55.965] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:55.965] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:56.065] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:56.115] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:56.115] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:56.215] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:56.265] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:56.265] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:56.475] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:56.525] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:56.525] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:56.625] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:56.675] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:56.675] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:56.775] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:56.825] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:56.825] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:56.925] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:56.975] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:56.975] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:57.185] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:57.235] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:57.235] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:57.335] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:57.385] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:57.385] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:57.485] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:57.535] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:57.535] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:57.635] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:57.685] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:57.685] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:57.895] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:57.945] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:57.945] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:58.045] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:58.095] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:58.095] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:58.195] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:58.245] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:58.245] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:58.345] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:58.395] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:58.395] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:58.605] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:58.655] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:58.655] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:58.755] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:58.805] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:58.805] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:58.915] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:58.965] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:58.965] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:59.065] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:59.115] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:59.115] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:59.325] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:59.375] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:59.375] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:59.475] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:59.525] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:59.525] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:59.625] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:59.675] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:59.675] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:34:59.775] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:34:59.825] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:34:59.825] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:00.035] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:00.085] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:00.085] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:00.185] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:00.235] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:00.235] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:00.335] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:00.385] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:00.385] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:00.485] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:00.535] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:00.535] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:00.745] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:00.795] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:00.795] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:00.895] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:00.945] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:00.945] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:01.045] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:01.095] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:01.095] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:01.195] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:01.245] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:01.245] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:01.455] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:01.505] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:01.505] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:01.605] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:01.655] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:01.655] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:01.755] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:01.805] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:01.805] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:01.905] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:01.955] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:01.955] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:02.165] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:02.215] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:02.215] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:02.315] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:02.365] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:02.365] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:02.465] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:02.515] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:02.515] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:02.615] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:02.665] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:02.665] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:02.875] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:02.925] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:35:02.925] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:03.025] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:35:03.075] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:35:03.075] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:35:03.075] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:35:03.395] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:35:03.455] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:35:03.705] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:35:03.725] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:35:03.775] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:35:03.775] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:35:03.775] (Singulate Sample                 :  22) @Run
[2018-01-12 19:35:03.775] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:35:03.775] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:35:03.775] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:35:03.835] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:35:03.885] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:35:03.945] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:35:04.045] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_G06_RAW.qlb"
[2018-01-12 19:35:04.145] (Detector                         :   2) @Run
[2018-01-12 19:35:04.145] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:35:44.047] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:35:45.137] (Detector                         :   2) @Stop
[2018-01-12 19:35:45.247] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:35:45.247] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:45.347] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:35:45.397] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:35:45.397] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:45.497] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:35:45.547] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:35:45.547] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:35:45.547] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:35:45.777] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:35:45.777] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:35:45.777] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:35:45.777] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:35:45.777] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:35:45.777] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:35:45.777] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:45.777] (PreFillP1                        :  24) @Run
[2018-01-12 19:35:45.777] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:35:45.827] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:35:45.827] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:35:45.827] (PreFillP2                        :  25) @Run
[2018-01-12 19:35:45.827] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:35:45.927] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:46.217] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:46.267] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:46.267] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:46.437] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:46.487] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:46.487] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:46.777] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:46.827] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:46.827] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:47.077] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:47.127] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:47.127] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:47.277] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:47.327] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:47.327] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:47.497] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:47.547] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:47.547] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:47.837] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:47.887] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:47.887] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:48.147] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:48.197] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:48.197] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:48.347] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:48.397] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:35:48.397] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:48.707] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:48.757] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:35:48.757] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:48.907] (PreFillP1                        :  24) @Stop
[2018-01-12 19:35:49.007] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:49.057] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:35:49.057] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:49.207] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:49.257] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:35:49.257] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:49.467] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:49.517] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:35:49.517] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:49.567] (PreFillP2                        :  25) @Stop
[2018-01-12 19:35:49.667] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:35:49.717] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:35:49.717] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:35:49.717] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:35:49.727] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:35:49.727] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:35:49.727] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:35:49.747] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:35:49.797] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:35:49.817] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:35:50.067] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:35:50.067] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:35:50.067] (Flush Capillary                  :  27) @Run
[2018-01-12 19:35:50.067] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:35:50.117] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:35:50.117] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:35:50.117] (Flush Singulator                 :  28) @Run
[2018-01-12 19:35:50.117] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:35:50.217] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:50.487] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:35:50.537] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:35:50.537] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:50.707] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:35:50.757] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:35:50.757] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:51.047] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:35:51.097] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:35:51.097] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:51.347] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:35:51.397] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:35:51.397] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:51.447] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:35:51.547] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:35:51.597] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:35:51.597] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:51.647] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:35:51.767] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:35:51.817] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:35:51.817] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:35:51.817] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:35:51.827] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:35:51.927] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:35:51.927] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:35:51.927] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:35:51.947] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:35:51.997] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:35:52.017] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:35:52.267] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:35:52.267] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:35:52.267] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:35:52.267] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:35:52.317] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:35:52.317] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:35:52.317] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:35:52.317] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:35:52.417] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:52.707] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:35:52.757] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:35:52.757] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:53.047] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:35:53.097] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:35:53.097] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:53.147] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:35:53.247] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:35:53.297] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:35:53.297] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:35:53.297] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:35:53.327] (Main Well                        :   0) Stop Pump
[2018-01-12 19:35:53.347] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:35:53.387] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:35:53.387] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:35:53.387] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:35:53.427] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:35:53.477] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:35:53.587] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:35:53.837] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:35:53.837] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:35:53.837] (Flush Capillary                  :  33) @Run
[2018-01-12 19:35:53.837] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:35:53.887] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:35:53.887] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:35:53.887] (Flush Singulator                 :  34) @Run
[2018-01-12 19:35:53.887] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:35:53.987] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:54.257] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:35:54.307] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:35:54.307] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:54.617] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:35:54.667] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:35:54.667] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:54.717] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:35:54.817] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:35:54.917] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:35:54.967] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:35:54.967] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:35:54.967] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:35:54.987] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:35:55.007] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:35:55.007] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:35:55.007] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:35:55.027] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:35:55.077] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:35:55.217] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:35:55.467] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:35:55.467] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:35:55.467] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:35:55.467] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:35:55.517] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:35:55.517] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:35:55.517] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:35:55.517] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:35:55.617] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:55.887] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:35:55.937] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:35:55.937] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:35:56.247] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:35:56.297] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:35:56.297] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:35:56.347] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:35:56.447] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:35:56.547] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:35:56.597] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:35:56.597] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:35:56.597] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:35:56.607] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:35:56.627] (Main Well                        :   0) Stop routine
[2018-01-12 19:35:56.627] (Main Well                        :   0) @Stop
[2018-01-12 19:35:57.017] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:35:57.017] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:35:57.027] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:35:57.027] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:35:57.027] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:35:57.027] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:35:59.017] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:35:59.017] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:35:59.017] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:35:59.017] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:35:59.057] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:35:59.057] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:35:45.137] (Detector                         :  17) @Stop
[2018-01-12 19:36:06.017] ** STARTING PRE-MAIN ROUTINE **
[2018-01-12 19:36:06.017] ** PRE-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:36:06.017] (MainPre Routine                  :   0) @Run
[2018-01-12 19:36:06.017] (MainPre Routine                  :   0) Home/Reset "Motion" motion stage
[2018-01-12 19:36:12.127] (MainPre Routine                  :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:36:12.127] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:36:12.127] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:36:12.767] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:36:12.767] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:36:12.777] (MainPre Routine                  :   0) Move To Waste (DO NOT Wait)
[2018-01-12 19:36:14.507] (MainPre Routine                  :   0) Run Sub Routine "Initialize Tecan Pumps" synchronously
[2018-01-12 19:36:14.507] (Initialize Tecan Pumps           :   2) @Run
[2018-01-12 19:36:14.507] (Initialize Tecan Pumps           :   2) Move Valve to position 1
[2018-01-12 19:36:14.667] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:36:14.717] (Initialize Tecan Pumps           :   2) Move Valve to position 0
[2018-01-12 19:36:14.737] (Initialize Tecan Pumps           :   2) Wait for 250 ms
[2018-01-12 19:36:14.987] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:36:14.987] (Initialize Tecan Pumps           :   2) Wait for 50 ms
[2018-01-12 19:36:14.987] (Initialize P1                    :   3) @Run
[2018-01-12 19:36:14.987] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:36:15.037] (Initialize Tecan Pumps           :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:36:15.037] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:36:15.037] (Initialize P2                    :   4) @Run
[2018-01-12 19:36:15.037] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:36:15.217] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:15.447] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:15.567] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:36:15.617] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:15.617] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:15.667] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:36:15.717] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:15.717] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:15.907] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:36:15.957] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:15.957] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:16.007] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:36:16.057] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:16.057] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:16.107] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:36:16.157] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:16.157] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:16.207] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:36:16.257] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:16.257] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:16.307] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:36:16.357] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:16.357] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:16.407] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:36:16.457] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:16.457] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:16.527] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:36:16.577] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:16.577] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:16.767] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:36:16.817] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:16.817] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:16.867] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:36:16.917] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:16.917] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:16.967] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:36:17.017] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:17.017] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:17.067] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:36:17.117] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:17.117] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:17.167] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:36:17.217] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:17.217] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:17.267] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:36:17.317] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:17.317] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:17.387] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:36:17.437] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:17.437] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:17.627] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:36:17.677] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:17.677] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:17.727] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:36:17.777] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:36:17.777] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:17.827] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:36:17.877] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:36:17.877] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:36:17.877] (Initialize P1                    :   3) @Stop
[2018-01-12 19:36:17.927] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:36:17.977] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:36:17.977] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:36:17.977] (Initialize P2                    :   4) @Stop
[2018-01-12 19:36:18.237] (Initialize Tecan Pumps           :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:36:18.437] (Initialize Tecan Pumps           :   2) @Stop
[2018-01-12 19:36:18.457] (MainPre Routine                  :   0) "TotalOilUse" = 591
[2018-01-12 19:36:18.457] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:36:18.457] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:36:18.457] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:36:18.457] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:18.457] (PreFillP1                        :   6) @Run
[2018-01-12 19:36:18.457] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:36:18.507] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:36:18.507] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:36:18.507] (PreFillP2                        :   7) @Run
[2018-01-12 19:36:18.507] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:36:18.607] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:18.877] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:18.927] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:36:18.927] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:19.237] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:19.287] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:36:19.287] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:19.537] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:19.587] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:36:19.587] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:19.737] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:19.787] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:36:19.787] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:19.957] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:20.007] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:36:20.007] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:20.297] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:20.347] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:36:20.347] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:20.597] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:20.647] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:36:20.647] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:20.697] (PreFillP1                        :   6) @Stop
[2018-01-12 19:36:20.797] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:20.847] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:36:20.847] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:21.017] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:21.067] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:36:21.067] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:21.297] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:21.347] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:36:21.347] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:21.497] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:21.547] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:36:21.547] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:21.649] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:21.699] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:36:21.699] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:21.869] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:21.919] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:36:21.919] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:22.109] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:22.159] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:36:22.159] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:36:22.159] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:36:22.209] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:36:22.209] (PreFillP2                        :   7) @Stop
[2018-01-12 19:36:22.249] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:36:22.249] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:36:22.249] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:36:22.269] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:22.319] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:36:22.339] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:36:22.589] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:36:22.589] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:22.589] (Flush Capillary                  :   9) @Run
[2018-01-12 19:36:22.589] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:36:22.639] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:36:22.639] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:36:22.639] (Flush Singulator                 :  10) @Run
[2018-01-12 19:36:22.639] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:36:22.739] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:22.999] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:23.049] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:23.049] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:23.199] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:23.249] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:23.249] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:23.419] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:23.469] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:23.469] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:23.759] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:23.809] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:23.809] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:24.059] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:24.109] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:24.109] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:24.259] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:24.309] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:24.309] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:24.479] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:24.529] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:24.529] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:24.819] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:24.869] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:36:24.869] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:24.919] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:36:25.019] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:36:25.119] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:25.169] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:36:25.169] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:36:25.169] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:36:25.199] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:36:25.219] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:36:25.219] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:36:25.219] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:36:25.259] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:25.309] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:36:25.419] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:36:25.669] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:36:25.669] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:25.669] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:36:25.669] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:36:25.719] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:36:25.719] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:36:25.719] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:36:25.719] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:36:25.819] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:26.089] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:26.139] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:26.139] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:26.449] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:26.499] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:26.499] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:26.749] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:26.799] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:26.799] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:26.949] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:26.999] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:26.999] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:27.169] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:27.219] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:27.219] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:27.269] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:36:27.509] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:27.559] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:36:27.559] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:27.609] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:36:27.709] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:27.759] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:36:27.759] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:36:27.759] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:36:27.769] (MainPre Routine                  :   0) "PreFlushN" = 1
[2018-01-12 19:36:27.769] (MainPre Routine                  :   0) "PreFlushN" (1) IS NOT <= 0 go to step 4
[2018-01-12 19:36:27.769] (MainPre Routine                  :   0) "TotalOilUse" = 1182
[2018-01-12 19:36:27.769] (MainPre Routine                  :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:36:27.769] (PreFill P1 and P2 before Flush   :   5) @Run
[2018-01-12 19:36:27.769] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:36:27.769] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:27.769] (PreFillP1                        :   6) @Run
[2018-01-12 19:36:27.769] (PreFillP1                        :   6) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:36:27.819] (PreFill P1 and P2 before Flush   :   5) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:36:27.819] (PreFill P1 and P2 before Flush   :   5) Wait for 100 ms
[2018-01-12 19:36:27.819] (PreFillP2                        :   7) @Run
[2018-01-12 19:36:27.819] (PreFillP2                        :   7) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:36:27.919] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:28.219] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:28.269] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:36:28.269] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:28.559] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:28.609] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:36:28.609] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:28.759] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:28.809] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:36:28.809] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:28.959] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:29.009] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:36:29.009] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:29.179] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:29.229] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:36:29.229] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:29.519] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:29.569] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:36:29.569] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:29.819] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:29.869] (PreFill P1 and P2 before Flush   :   5) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:36:29.869] (PreFill P1 and P2 before Flush   :   5) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:30.019] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:30.069] (PreFill P1 and P2 before Flush   :   5) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:36:30.069] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:30.119] (PreFillP1                        :   6) @Stop
[2018-01-12 19:36:30.239] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:30.289] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:36:30.289] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:30.579] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:30.629] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:36:30.629] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:30.779] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:30.829] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:36:30.829] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:30.929] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:30.979] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:36:30.979] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:31.129] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:31.179] (PreFill P1 and P2 before Flush   :   5) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:36:31.179] (PreFill P1 and P2 before Flush   :   5) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:31.389] (PreFill P1 and P2 before Flush   :   5) Wait for 50 ms
[2018-01-12 19:36:31.439] (PreFill P1 and P2 before Flush   :   5) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:36:31.439] (PreFill P1 and P2 before Flush   :   5) Stop routine
[2018-01-12 19:36:31.439] (PreFill P1 and P2 before Flush   :   5) @Stop
[2018-01-12 19:36:31.469] (MainPre Routine                  :   0) Stop Pump
[2018-01-12 19:36:31.489] (PreFillP2                        :   7) @Stop
[2018-01-12 19:36:31.529] (MainPre Routine                  :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:36:31.529] (Flush Singulator and Capillary   :   8) @Run
[2018-01-12 19:36:31.529] (Flush Singulator and Capillary   :   8) Move Valve to position 1
[2018-01-12 19:36:31.549] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:31.599] (Flush Singulator and Capillary   :   8) Move Valve to position 0
[2018-01-12 19:36:31.619] (Flush Singulator and Capillary   :   8) Wait for 250 ms
[2018-01-12 19:36:31.869] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:36:31.869] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:31.869] (Flush Capillary                  :   9) @Run
[2018-01-12 19:36:31.869] (Flush Capillary                  :   9) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:36:31.919] (Flush Singulator and Capillary   :   8) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:36:31.919] (Flush Singulator and Capillary   :   8) Wait for 100 ms
[2018-01-12 19:36:31.919] (Flush Singulator                 :  10) @Run
[2018-01-12 19:36:31.919] (Flush Singulator                 :  10) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:36:32.019] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:32.269] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:32.319] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:32.319] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:32.469] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:32.519] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:32.519] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:32.689] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:32.739] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:32.739] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:33.029] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:33.079] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:33.079] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:33.329] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:33.379] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:33.379] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:33.529] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:33.579] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:33.579] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:33.749] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:33.799] (Flush Singulator and Capillary   :   8) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:33.799] (Flush Singulator and Capillary   :   8) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:34.089] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:34.139] (Flush Singulator and Capillary   :   8) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:36:34.139] (Flush Singulator and Capillary   :   8) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:34.189] (Flush Singulator                 :  10) @Stop
[2018-01-12 19:36:34.289] (Flush Capillary                  :   9) @Stop
[2018-01-12 19:36:34.389] (Flush Singulator and Capillary   :   8) Wait for 50 ms
[2018-01-12 19:36:34.439] (Flush Singulator and Capillary   :   8) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:36:34.439] (Flush Singulator and Capillary   :   8) Stop routine
[2018-01-12 19:36:34.439] (Flush Singulator and Capillary   :   8) @Stop
[2018-01-12 19:36:34.479] (MainPre Routine                  :   0) Start Forward at 100 %
[2018-01-12 19:36:34.499] (MainPre Routine                  :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:36:34.499] (Flush Pickup Tip and Rinse       :  11) @Run
[2018-01-12 19:36:34.499] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 0
[2018-01-12 19:36:34.539] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:34.589] (Flush Pickup Tip and Rinse       :  11) Move Valve to position 1
[2018-01-12 19:36:34.699] (Flush Pickup Tip and Rinse       :  11) Wait for 250 ms
[2018-01-12 19:36:34.949] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:36:34.949] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:34.949] (Flush Pickup Tip                 :  12) @Run
[2018-01-12 19:36:34.949] (Flush Pickup Tip                 :  12) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:36:34.999] (Flush Pickup Tip and Rinse       :  11) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:36:34.999] (Flush Pickup Tip and Rinse       :  11) Wait for 100 ms
[2018-01-12 19:36:34.999] (Rinse Pickup Tip                 :  13) @Run
[2018-01-12 19:36:34.999] (Rinse Pickup Tip                 :  13) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:36:35.099] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:35.369] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:35.419] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:35.419] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:35.729] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:35.779] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:35.779] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:36.029] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:36.079] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:36.079] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:36.229] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:36.279] (Flush Pickup Tip and Rinse       :  11) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:36:36.279] (Flush Pickup Tip and Rinse       :  11) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:36.589] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:36.639] (Flush Pickup Tip and Rinse       :  11) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:36:36.639] (Flush Pickup Tip and Rinse       :  11) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:36.689] (Rinse Pickup Tip                 :  13) @Stop
[2018-01-12 19:36:36.789] (Flush Pickup Tip                 :  12) @Stop
[2018-01-12 19:36:36.889] (Flush Pickup Tip and Rinse       :  11) Wait for 50 ms
[2018-01-12 19:36:36.939] (Flush Pickup Tip and Rinse       :  11) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:36:36.939] (Flush Pickup Tip and Rinse       :  11) Stop routine
[2018-01-12 19:36:36.939] (Flush Pickup Tip and Rinse       :  11) @Stop
[2018-01-12 19:36:36.949] (MainPre Routine                  :   0) "PreFlushN" = 0
[2018-01-12 19:36:36.949] (MainPre Routine                  :   0) "PreFlushN" (0) IS <= 0 go to step 12
[2018-01-12 19:36:36.949] (MainPre Routine                  :   0) "P1FillVolume" = 5
[2018-01-12 19:36:36.949] (MainPre Routine                  :   0) "P2FillVolume" = 5
[2018-01-12 19:36:36.949] (MainPre Routine                  :   0) "TotalOilUse" = 1192
[2018-01-12 19:36:36.949] (MainPre Routine                  :   0) Run Sub Routine "Prefill before Flush" synchronously
[2018-01-12 19:36:36.949] (Prefill before Flush             :  14) @Run
[2018-01-12 19:36:36.949] (Prefill before Flush             :  14) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:36:36.949] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:36:36.949] (PreFillP1                        :  15) @Run
[2018-01-12 19:36:36.949] (PreFillP1                        :  15) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:36:36.999] (Prefill before Flush             :  14) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:36:36.999] (Prefill before Flush             :  14) Wait for 100 ms
[2018-01-12 19:36:36.999] (PreFillP2                        :  16) @Run
[2018-01-12 19:36:36.999] (PreFillP2                        :  16) Load carrier with 5 uL at 7500 uL/min (Wait)
[2018-01-12 19:36:37.099] (Prefill before Flush             :  14) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:37.529] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:36:37.579] (Prefill before Flush             :  14) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:36:37.579] (Prefill before Flush             :  14) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:37.629] (PreFillP1                        :  15) @Stop
[2018-01-12 19:36:37.729] (Prefill before Flush             :  14) Wait for 50 ms
[2018-01-12 19:36:37.779] (Prefill before Flush             :  14) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:36:37.779] (Prefill before Flush             :  14) Stop routine
[2018-01-12 19:36:37.779] (Prefill before Flush             :  14) @Stop
[2018-01-12 19:36:37.799] (MainPre Routine                  :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1192
[2018-01-12 19:36:37.829] (PreFillP2                        :  16) @Stop
[2018-01-12 19:36:37.849] (MainPre Routine                  :   0) Stop routine
[2018-01-12 19:36:37.849] (MainPre Routine                  :   0) @Stop
[2018-01-12 19:35:45.137] (Detector                         :   2) @Stop
[2018-01-12 19:36:38.089] ** STARTING H06 MAIN ROUTINE **
[2018-01-12 19:36:38.089] ** MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:36:38.089] (Main Well                        :   0) @Run
[2018-01-12 19:36:38.089] (Main Well                        :   0) User input for "Motion_Well_Number" (default 1) "Input_Well_Number"
[2018-01-12 19:36:38.089] (Main Well                        :   0) User input for "Input_Raw_Qlb_File" (default "C:\QuantaLife\Data\RawData.qlb") "Input_Raw_Qlb_File"
[2018-01-12 19:36:38.089] (Main Well                        :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:36:38.089] (Main Well                        :   0) User input for "Color_Compensation_NVM_Position" (default 1) "Color_Compensation_NVM_Position"
[2018-01-12 19:36:38.089] (Main Well                        :   0) User input for "TriggerFixedOffset" (default 100) "Trigger_Fixed_Offset"
[2018-01-12 19:36:38.089] (Main Well                        :   0) User input for "TriggerSigmaMultiplier" (default 3) "Trigger_Sigma_Multiplier"
[2018-01-12 19:36:38.089] (Main Well                        :   0) User input for "TriggerMinAmplitude" (default 500) "Trigger_Min_Amplitude"
[2018-01-12 19:36:38.089] (Main Well                        :   0) Run Sub Routine "Turn on LEDs and PMTs" synchronously
[2018-01-12 19:36:38.089] (Turn on LEDs and PMTs            :   1) @Run
[2018-01-12 19:36:38.089] (Turn on LEDs and PMTs            :   1) "Ch0" LED@90 %/PMT@Default %;"Ch1" LED@90 %/PMT@Default %
[2018-01-12 19:36:38.599] (Turn on LEDs and PMTs            :   1) Stop routine
[2018-01-12 19:36:38.599] (Turn on LEDs and PMTs            :   1) @Stop
[2018-01-12 19:36:38.639] (Main Well                        :   0) Persistent Read from Detector Parameter 192
[2018-01-12 19:36:38.759] (Main Well                        :   0) Persistent Read from Detector Parameter 194
[2018-01-12 19:36:38.759] (Main Well                        :   0) "Clog_Status" (0) IS NOT = 1 go to step 12
[2018-01-12 19:36:38.759] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT < 79 go to step 13
[2018-01-12 19:36:38.759] (Main Well                        :   0) "PickupTubingVolume" (92) IS NOT > 96 go to step 14
[2018-01-12 19:36:38.759] (Main Well                        :   0) "PickupVolume" = 103
[2018-01-12 19:36:38.759] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT < 54 go to step 16
[2018-01-12 19:36:38.759] (Main Well                        :   0) "SampleLoopVolume" (63) IS NOT > 68 go to step 17
[2018-01-12 19:36:38.759] (Main Well                        :   0) "SampleFocusVolume" = 67
[2018-01-12 19:36:38.759] (Main Well                        :   0) "OilFocusVolume" = 340
[2018-01-12 19:36:38.759] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:36:38.779] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:36:38.829] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:36:38.849] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:36:39.099] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P2" asynchronously
[2018-01-12 19:36:39.099] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:36:39.099] (PreWet Tip from P2               :  19) @Run
[2018-01-12 19:36:39.099] (PreWet Tip from P2               :  19) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:36:39.149] (Main Well                        :   0) Run Sub Routine "PreWet Tip from P1" asynchronously
[2018-01-12 19:36:39.149] (Main Well                        :   0) Wait for 100 ms
[2018-01-12 19:36:39.149] (PreWet Tip from P1               :  20) @Run
[2018-01-12 19:36:39.149] (PreWet Tip from P1               :  20) Dispense 5 uL at 300 uL/min (Wait)
[2018-01-12 19:36:39.249] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:39.519] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:36:39.569] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:36:39.569] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:39.879] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:36:39.929] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:36:39.929] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:40.179] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:36:40.229] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:36:40.229] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:40.379] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:36:40.429] (Main Well                        :   0) "P1Status" (0) IS NOT = 1 go to step 27
[2018-01-12 19:36:40.429] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:40.499] (PreWet Tip from P2               :  19) @Stop
[2018-01-12 19:36:40.739] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:36:40.789] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 30
[2018-01-12 19:36:40.789] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:40.839] (PreWet Tip from P1               :  20) @Stop
[2018-01-12 19:36:40.939] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:36:40.989] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 33
[2018-01-12 19:36:40.989] (Main Well                        :   0) "P1FillVolume" = 124
[2018-01-12 19:36:40.989] (Main Well                        :   0) "P2FillVolume" = 202
[2018-01-12 19:36:40.989] (Main Well                        :   0) "TotalOilUse" = 326
[2018-01-12 19:36:40.989] (Main Well                        :   0) Load carrier with 202 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:36:41.049] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:36:41.099] (Main Well                        :   0) Load carrier with 124 uL at 7500 uL/min (DO NOT Wait)
[2018-01-12 19:36:41.159] (Main Well                        :   0) Move to Well 90 with z-offset of 2540 um (Wait)
[2018-01-12 19:36:44.259] (Main Well                        :   0) Set "P1Status" to [Stopped] status
[2018-01-12 19:36:44.379] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:36:44.429] (Main Well                        :   0) "P1Status" (1) IS = 1 go to step 43
[2018-01-12 19:36:44.429] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:44.619] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:36:44.669] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 46
[2018-01-12 19:36:44.669] (Main Well                        :   0) Stop Pump
[2018-01-12 19:36:44.709] (Main Well                        :   0) Dispense 6 uL at 240 uL/min (DO NOT Wait)
[2018-01-12 19:36:44.769] (Main Well                        :   0) Move to Well 90 with z-offset of 310 um (Wait)
[2018-01-12 19:36:55.709] (Main Well                        :   0) Set "P2Status" to [Stopped] status
[2018-01-12 19:36:55.949] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:36:55.999] (Main Well                        :   0) "P2Status" (1) IS = 1 go to step 52
[2018-01-12 19:36:55.999] (Main Well                        :   0) Run Sub Routine "Pickup Sample" asynchronously
[2018-01-12 19:36:55.999] (Main Well                        :   0) Wait for Sub-routine "Pickup Sample" to change to state "Stop"
[2018-01-12 19:36:55.999] (Pickup Sample                    :  21) @Run
[2018-01-12 19:36:55.999] (Pickup Sample                    :  21) Pickup 46 uL at 720 uL/min (Wait)
[2018-01-12 19:37:00.669] (Pickup Sample                    :  21) Move To Waste (DO NOT Wait)
[2018-01-12 19:37:03.469] (Pickup Sample                    :  21) Dispense 52 uL at 532 uL/min (DO NOT Wait)
[2018-01-12 19:37:03.549] (Pickup Sample                    :  21) Pickup 103 uL at 720 uL/min (DO NOT Wait)
[2018-01-12 19:37:03.749] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:03.849] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:03.899] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:03.899] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:03.999] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:04.049] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:04.049] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:04.149] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:04.199] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:04.199] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:04.309] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:04.359] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:04.359] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:04.549] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:04.599] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:04.599] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:04.699] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:04.749] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:04.749] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:04.849] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:04.899] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:04.899] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:04.999] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:05.049] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:05.049] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:05.259] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:05.309] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:05.309] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:05.409] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:05.459] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:05.459] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:05.559] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:05.609] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:05.609] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:05.709] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:05.759] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:05.759] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:05.969] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:06.019] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:06.019] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:06.119] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:06.169] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:06.169] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:06.269] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:06.319] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:06.319] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:06.419] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:06.469] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:06.469] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:06.679] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:06.729] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:06.729] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:06.829] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:06.879] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:06.879] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:06.979] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:07.029] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:07.029] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:07.129] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:07.179] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:07.179] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:07.389] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:07.439] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:07.439] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:07.539] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:07.589] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:07.589] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:07.689] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:07.739] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:07.739] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:07.839] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:07.889] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:07.889] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:08.099] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:08.149] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:08.149] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:08.249] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:08.299] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:08.299] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:08.399] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:08.449] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:08.449] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:08.549] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:08.599] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:08.599] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:08.809] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:08.859] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:08.859] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:08.959] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:09.009] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:09.009] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:09.109] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:09.159] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:09.159] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:09.259] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:09.309] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:09.309] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:09.519] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:09.569] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:09.569] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:09.669] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:09.719] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:09.719] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:09.819] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:09.869] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:09.869] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:09.969] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:10.019] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:10.019] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:10.229] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:10.279] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:10.279] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:10.379] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:10.429] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:10.429] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:10.529] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:10.579] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:10.579] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:10.679] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:10.729] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:10.729] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:10.939] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:10.989] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:10.989] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:11.089] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:11.139] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:11.139] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:11.239] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:11.289] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:11.289] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:11.389] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:11.439] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:11.439] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:11.649] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:11.699] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:11.699] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:11.799] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:11.849] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:11.849] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:11.949] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:11.999] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:11.999] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:12.099] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:12.149] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:12.149] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:12.359] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:12.409] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:12.409] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:12.509] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:12.559] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:12.559] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:12.659] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:12.709] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:12.709] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:12.809] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:12.859] (Pickup Sample                    :  21) "P2Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:12.859] (Pickup Sample                    :  21) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:13.069] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:13.119] (Pickup Sample                    :  21) "P2Status" (1) IS = 1 go to step 7
[2018-01-12 19:37:13.119] (Pickup Sample                    :  21) Set "P1Status" to [Stopped] status
[2018-01-12 19:37:13.219] (Pickup Sample                    :  21) Wait for 50 ms
[2018-01-12 19:37:13.269] (Pickup Sample                    :  21) "P1Status" (1) IS = 1 go to step 10
[2018-01-12 19:37:13.269] (Pickup Sample                    :  21) Stop routine
[2018-01-12 19:37:13.269] (Pickup Sample                    :  21) @Stop
[2018-01-12 19:37:13.599] (Main Well                        :   0) Move Valve to position 0
[2018-01-12 19:37:13.649] (Main Well                        :   0) Wait for 250 ms
[2018-01-12 19:37:13.899] (Main Well                        :   0) Move Valve to position 1
[2018-01-12 19:37:13.919] (Main Well                        :   0) Wait for 50 ms
[2018-01-12 19:37:13.969] (Main Well                        :   0) Run Sub Routine "Singulate Sample" asynchronously
[2018-01-12 19:37:13.969] (Main Well                        :   0) Wait for Sub-routine "Singulate Sample" to change to state "Stop"
[2018-01-12 19:37:13.969] (Singulate Sample                 :  22) @Run
[2018-01-12 19:37:13.969] (Singulate Sample                 :  22) "PumpWaitTime" = 39900
[2018-01-12 19:37:13.969] (Singulate Sample                 :  22) "TotalFlowRate" = 600
[2018-01-12 19:37:13.969] (Singulate Sample                 :  22) Dispense 340 uL at 500 uL/min (DO NOT Wait)
[2018-01-12 19:37:14.029] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:37:14.079] (Singulate Sample                 :  22) Dispense 67 uL at 100 uL/min (DO NOT Wait)
[2018-01-12 19:37:14.139] (Singulate Sample                 :  22) Wait for 100 ms
[2018-01-12 19:37:14.239] (Singulate Sample                 :  22) Start Continuous Acquisition on "Detector" at 100000 Hz and save to "1_12_Experiment_final_Katya_H06_RAW.qlb"
[2018-01-12 19:37:14.349] (Detector                         :   2) @Run
[2018-01-12 19:37:14.349] (Singulate Sample                 :  22) Wait for 39900 ms
[2018-01-12 19:37:54.249] (Singulate Sample                 :  22) Stop Continuous Acquisition on "Detector"
[2018-01-12 19:37:55.219] (Detector                         :   2) @Stop
[2018-01-12 19:37:55.249] (Singulate Sample                 :  22) User Notification "Acquisition_Com..."
[2018-01-12 19:37:55.249] (Singulate Sample                 :  22) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:55.379] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:37:55.429] (Singulate Sample                 :  22) "P2Status" (1) IS = 1 go to step 13
[2018-01-12 19:37:55.429] (Singulate Sample                 :  22) Set "P1Status" to [Stopped] status
[2018-01-12 19:37:55.529] (Singulate Sample                 :  22) Wait for 50 ms
[2018-01-12 19:37:55.579] (Singulate Sample                 :  22) "P1Status" (1) IS = 1 go to step 16
[2018-01-12 19:37:55.579] (Singulate Sample                 :  22) Stop routine
[2018-01-12 19:37:55.579] (Singulate Sample                 :  22) @Stop
[2018-01-12 19:37:55.969] (Main Well                        :   0) "P1FillVolume" = 308
[2018-01-12 19:37:55.969] (Main Well                        :   0) "P2FillVolume" = 399
[2018-01-12 19:37:55.969] (Main Well                        :   0) "TotalOilUse" = 1033
[2018-01-12 19:37:55.969] (Main Well                        :   0) Run Sub Routine "Prefill Syringes for Flushes" synchronously
[2018-01-12 19:37:55.969] (Prefill Syringes for Flushes     :  23) @Run
[2018-01-12 19:37:55.969] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:37:55.969] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:55.969] (PreFillP1                        :  24) @Run
[2018-01-12 19:37:55.969] (PreFillP1                        :  24) Load carrier with 308 uL at 7500 uL/min (Wait)
[2018-01-12 19:37:56.019] (Prefill Syringes for Flushes     :  23) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:37:56.019] (Prefill Syringes for Flushes     :  23) Wait for 100 ms
[2018-01-12 19:37:56.019] (PreFillP2                        :  25) @Run
[2018-01-12 19:37:56.019] (PreFillP2                        :  25) Load carrier with 399 uL at 7500 uL/min (Wait)
[2018-01-12 19:37:56.119] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:37:56.399] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:56.449] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:56.449] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:37:56.619] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:56.669] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:56.669] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:37:56.959] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:57.009] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:57.009] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:37:57.259] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:57.309] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:57.309] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:37:57.459] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:57.509] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:57.509] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:37:57.679] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:57.729] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:57.729] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:37:58.019] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:58.069] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:58.069] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:37:58.319] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:58.369] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:58.369] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:37:58.519] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:58.569] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:58.569] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:37:58.739] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:58.789] (Prefill Syringes for Flushes     :  23) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:37:58.789] (Prefill Syringes for Flushes     :  23) Set "P1Status" to [Stopped] status
[2018-01-12 19:37:59.079] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:59.129] (Prefill Syringes for Flushes     :  23) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:37:59.129] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:59.179] (PreFillP1                        :  24) @Stop
[2018-01-12 19:37:59.379] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:59.429] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:37:59.429] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:59.529] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:59.579] (Prefill Syringes for Flushes     :  23) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:37:59.579] (Prefill Syringes for Flushes     :  23) Set "P2Status" to [Stopped] status
[2018-01-12 19:37:59.749] (Prefill Syringes for Flushes     :  23) Wait for 50 ms
[2018-01-12 19:37:59.799] (Prefill Syringes for Flushes     :  23) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:37:59.799] (Prefill Syringes for Flushes     :  23) Stop routine
[2018-01-12 19:37:59.799] (Prefill Syringes for Flushes     :  23) @Stop
[2018-01-12 19:37:59.819] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:37:59.819] (Flush Singulator and Capillary   :  26) @Run
[2018-01-12 19:37:59.819] (Flush Singulator and Capillary   :  26) Move Valve to position 1
[2018-01-12 19:37:59.909] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:37:59.959] (Flush Singulator and Capillary   :  26) Move Valve to position 0
[2018-01-12 19:38:00.009] (PreFillP2                        :  25) @Stop
[2018-01-12 19:38:00.029] (Flush Singulator and Capillary   :  26) Wait for 250 ms
[2018-01-12 19:38:00.279] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:38:00.279] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:38:00.279] (Flush Capillary                  :  27) @Run
[2018-01-12 19:38:00.279] (Flush Capillary                  :  27) Dispense 113 uL at 7400 uL/min (Wait)
[2018-01-12 19:38:00.329] (Flush Singulator and Capillary   :  26) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:38:00.329] (Flush Singulator and Capillary   :  26) Wait for 100 ms
[2018-01-12 19:38:00.329] (Flush Singulator                 :  28) @Run
[2018-01-12 19:38:00.329] (Flush Singulator                 :  28) Dispense 92 uL at 6000 uL/min (Wait)
[2018-01-12 19:38:00.429] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:00.719] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:38:00.769] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:38:00.769] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:01.059] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:38:01.109] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:38:01.109] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:01.259] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:38:01.309] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:38:01.309] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:01.459] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:38:01.509] (Flush Singulator and Capillary   :  26) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:38:01.509] (Flush Singulator and Capillary   :  26) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:01.679] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:38:01.729] (Flush Singulator and Capillary   :  26) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:38:01.729] (Flush Singulator and Capillary   :  26) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:01.779] (Flush Capillary                  :  27) @Stop
[2018-01-12 19:38:02.019] (Flush Singulator and Capillary   :  26) Wait for 50 ms
[2018-01-12 19:38:02.069] (Flush Singulator and Capillary   :  26) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:38:02.069] (Flush Singulator and Capillary   :  26) Stop routine
[2018-01-12 19:38:02.069] (Flush Singulator and Capillary   :  26) @Stop
[2018-01-12 19:38:02.119] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:38:02.119] (Flush Singulator                 :  28) @Stop
[2018-01-12 19:38:02.139] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:38:02.139] (Final Flush Pickup Tip and Rinse :  29) @Run
[2018-01-12 19:38:02.139] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 0
[2018-01-12 19:38:02.159] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:38:02.209] (Final Flush Pickup Tip and Rinse :  29) Move Valve to position 1
[2018-01-12 19:38:02.229] (Final Flush Pickup Tip and Rinse :  29) Wait for 250 ms
[2018-01-12 19:38:02.479] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:38:02.479] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:38:02.479] (Flush Pickup Tip                 :  30) @Run
[2018-01-12 19:38:02.479] (Flush Pickup Tip                 :  30) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:38:02.529] (Final Flush Pickup Tip and Rinse :  29) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:38:02.529] (Final Flush Pickup Tip and Rinse :  29) Wait for 100 ms
[2018-01-12 19:38:02.529] (Rinse Pickup Tip                 :  31) @Run
[2018-01-12 19:38:02.529] (Rinse Pickup Tip                 :  31) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:38:02.629] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:02.799] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:38:02.849] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:38:02.849] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:03.099] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:38:03.149] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:38:03.149] (Final Flush Pickup Tip and Rinse :  29) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:03.459] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:38:03.509] (Final Flush Pickup Tip and Rinse :  29) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:38:03.509] (Final Flush Pickup Tip and Rinse :  29) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:03.559] (Rinse Pickup Tip                 :  31) @Stop
[2018-01-12 19:38:03.659] (Flush Pickup Tip                 :  30) @Stop
[2018-01-12 19:38:03.759] (Final Flush Pickup Tip and Rinse :  29) Wait for 50 ms
[2018-01-12 19:38:03.809] (Final Flush Pickup Tip and Rinse :  29) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:38:03.809] (Final Flush Pickup Tip and Rinse :  29) Stop routine
[2018-01-12 19:38:03.809] (Final Flush Pickup Tip and Rinse :  29) @Stop
[2018-01-12 19:38:03.839] (Main Well                        :   0) Stop Pump
[2018-01-12 19:38:03.879] (Main Well                        :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:38:03.879] (Flush Singulator and Capillary   :  32) @Run
[2018-01-12 19:38:03.879] (Flush Singulator and Capillary   :  32) Move Valve to position 1
[2018-01-12 19:38:03.919] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:38:03.969] (Flush Singulator and Capillary   :  32) Move Valve to position 0
[2018-01-12 19:38:04.079] (Flush Singulator and Capillary   :  32) Wait for 250 ms
[2018-01-12 19:38:04.329] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:38:04.329] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:38:04.329] (Flush Capillary                  :  33) @Run
[2018-01-12 19:38:04.329] (Flush Capillary                  :  33) Dispense 26 uL at 3000 uL/min (Wait)
[2018-01-12 19:38:04.379] (Flush Singulator and Capillary   :  32) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:38:04.379] (Flush Singulator and Capillary   :  32) Wait for 100 ms
[2018-01-12 19:38:04.379] (Flush Singulator                 :  34) @Run
[2018-01-12 19:38:04.379] (Flush Singulator                 :  34) Dispense 92 uL at 11000 uL/min (Wait)
[2018-01-12 19:38:04.479] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:04.749] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:38:04.799] (Flush Singulator and Capillary   :  32) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:38:04.799] (Flush Singulator and Capillary   :  32) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:05.109] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:38:05.159] (Flush Singulator and Capillary   :  32) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:38:05.159] (Flush Singulator and Capillary   :  32) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:05.209] (Flush Singulator                 :  34) @Stop
[2018-01-12 19:38:05.309] (Flush Capillary                  :  33) @Stop
[2018-01-12 19:38:05.409] (Flush Singulator and Capillary   :  32) Wait for 50 ms
[2018-01-12 19:38:05.459] (Flush Singulator and Capillary   :  32) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:38:05.459] (Flush Singulator and Capillary   :  32) Stop routine
[2018-01-12 19:38:05.459] (Flush Singulator and Capillary   :  32) @Stop
[2018-01-12 19:38:05.479] (Main Well                        :   0) Start Forward at 100 %
[2018-01-12 19:38:05.499] (Main Well                        :   0) Run Sub Routine "Final Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:38:05.499] (Final Flush Pickup Tip and Rinse :  35) @Run
[2018-01-12 19:38:05.499] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 0
[2018-01-12 19:38:05.519] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:38:05.569] (Final Flush Pickup Tip and Rinse :  35) Move Valve to position 1
[2018-01-12 19:38:05.699] (Final Flush Pickup Tip and Rinse :  35) Wait for 250 ms
[2018-01-12 19:38:05.949] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:38:05.949] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:38:05.949] (Flush Pickup Tip                 :  36) @Run
[2018-01-12 19:38:05.949] (Flush Pickup Tip                 :  36) Dispense 130 uL at 14000 uL/min (Wait)
[2018-01-12 19:38:05.999] (Final Flush Pickup Tip and Rinse :  35) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:38:05.999] (Final Flush Pickup Tip and Rinse :  35) Wait for 100 ms
[2018-01-12 19:38:05.999] (Rinse Pickup Tip                 :  37) @Run
[2018-01-12 19:38:05.999] (Rinse Pickup Tip                 :  37) Dispense 62 uL at 6675 uL/min (Wait)
[2018-01-12 19:38:06.099] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:06.369] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:38:06.419] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:38:06.419] (Final Flush Pickup Tip and Rinse :  35) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:06.729] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:38:06.779] (Final Flush Pickup Tip and Rinse :  35) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:38:06.779] (Final Flush Pickup Tip and Rinse :  35) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:06.829] (Rinse Pickup Tip                 :  37) @Stop
[2018-01-12 19:38:06.929] (Flush Pickup Tip                 :  36) @Stop
[2018-01-12 19:38:07.029] (Final Flush Pickup Tip and Rinse :  35) Wait for 50 ms
[2018-01-12 19:38:07.079] (Final Flush Pickup Tip and Rinse :  35) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:38:07.079] (Final Flush Pickup Tip and Rinse :  35) Stop routine
[2018-01-12 19:38:07.079] (Final Flush Pickup Tip and Rinse :  35) @Stop
[2018-01-12 19:38:07.099] (Main Well                        :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1033
[2018-01-12 19:38:07.119] (Main Well                        :   0) Stop routine
[2018-01-12 19:38:07.119] (Main Well                        :   0) @Stop
[2018-01-12 19:38:07.149] ** STARTING TURNOFFLEDSANDPMTS ROUTINE **
[2018-01-12 19:38:07.149] ** TURNOFFLEDSANDPMTS ROUTINE FOLDER: "0004A" **
[2018-01-12 19:38:07.149] (Turn off LEDs and PMTs           :   0) @Run
[2018-01-12 19:38:07.149] (Turn off LEDs and PMTs           :   0) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:38:07.299] (Turn off LEDs and PMTs           :   0) Stop routine
[2018-01-12 19:38:07.299] (Turn off LEDs and PMTs           :   0) @Stop
[2018-01-12 19:38:09.149] ** STARTING STOPPERISTALTICPUMP ROUTINE **
[2018-01-12 19:38:09.149] ** STOPPERISTALTICPUMP ROUTINE FOLDER: "0004A" **
[2018-01-12 19:38:09.149] (Stop Peristaltic Pump            :   0) @Run
[2018-01-12 19:38:09.149] (Stop Peristaltic Pump            :   0) Stop Pump
[2018-01-12 19:38:09.319] (Stop Peristaltic Pump            :   0) Stop routine
[2018-01-12 19:38:09.319] (Stop Peristaltic Pump            :   0) @Stop
[2018-01-12 19:37:55.219] (Detector                         :  21) @Stop
[2018-01-12 19:38:48.221] ** STARTING POST-MAIN ROUTINE **
[2018-01-12 19:38:48.221] ** POST-MAIN ROUTINE FOLDER: "0004A" **
[2018-01-12 19:38:48.221] (MainPost Routine                 :   0) @Run
[2018-01-12 19:38:48.221] (MainPost Routine                 :   0) User input for "Clog_Status" (default 0) "Clog_Status"
[2018-01-12 19:38:48.221] (MainPost Routine                 :   0) Move To Waste (Wait)
[2018-01-12 19:38:48.891] (MainPost Routine                 :   0) Run Sub Routine "Turn off LEDs and PMTs" synchronously
[2018-01-12 19:38:48.891] (Turn off LEDs and PMTs           :   1) @Run
[2018-01-12 19:38:48.891] (Turn off LEDs and PMTs           :   1) "Ch0" LED@0 %/PMT@0 %;"Ch1" LED@0 %/PMT@0 %
[2018-01-12 19:38:49.051] (Turn off LEDs and PMTs           :   1) Stop routine
[2018-01-12 19:38:49.051] (Turn off LEDs and PMTs           :   1) @Stop
[2018-01-12 19:38:49.091] (MainPost Routine                 :   0) Run Sub Routine "Initialize Syringes" synchronously
[2018-01-12 19:38:49.091] (Initialize Syringes              :   2) @Run
[2018-01-12 19:38:49.091] (Initialize Syringes              :   2) Move Valve to position 1
[2018-01-12 19:38:49.111] (Initialize Syringes              :   2) Wait for 50 ms
[2018-01-12 19:38:49.161] (Initialize Syringes              :   2) Move Valve to position 0
[2018-01-12 19:38:49.181] (Initialize Syringes              :   2) Wait for 250 ms
[2018-01-12 19:38:49.431] (Initialize Syringes              :   2) Run Sub Routine "Initialize P1" asynchronously
[2018-01-12 19:38:49.431] (Initialize Syringes              :   2) Wait for 50 ms
[2018-01-12 19:38:49.431] (Initialize P1                    :   3) @Run
[2018-01-12 19:38:49.431] (Initialize P1                    :   3) Initialize Pump "Pump1" (Default)
[2018-01-12 19:38:49.481] (Initialize Syringes              :   2) Run Sub Routine "Initialize P2" asynchronously
[2018-01-12 19:38:49.481] (Initialize Syringes              :   2) Wait for Sub-routine "Initialize P1" to change to state "Stop"
[2018-01-12 19:38:49.481] (Initialize P2                    :   4) @Run
[2018-01-12 19:38:49.481] (Initialize P2                    :   4) Initialize Pump "Pump2" (Default)
[2018-01-12 19:38:49.661] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:49.891] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:50.011] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:38:50.061] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:50.061] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:50.111] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:38:50.161] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:50.161] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:50.351] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:38:50.401] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:50.401] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:50.451] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:38:50.501] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:50.501] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:50.551] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:38:50.601] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:50.601] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:50.651] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:38:50.701] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:50.701] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:50.751] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:38:50.801] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:50.801] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:50.851] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:38:50.901] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:50.901] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:50.971] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:38:51.021] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:51.021] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:51.211] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:38:51.261] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:51.261] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:51.311] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:38:51.361] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:51.361] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:51.411] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:38:51.461] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:51.461] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:51.511] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:38:51.561] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:51.561] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:51.611] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:38:51.661] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:51.661] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:51.711] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:38:51.761] (Initialize P1                    :   3) "P1Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:51.761] (Initialize P1                    :   3) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:51.831] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:38:51.881] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:51.881] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:52.081] (Initialize P1                    :   3) Wait for 50 ms
[2018-01-12 19:38:52.131] (Initialize P1                    :   3) "P1Status" (1) IS = 1 go to step 4
[2018-01-12 19:38:52.131] (Initialize P1                    :   3) Stop routine
[2018-01-12 19:38:52.131] (Initialize P1                    :   3) @Stop
[2018-01-12 19:38:52.181] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:38:52.231] (Initialize P2                    :   4) "P2Status" (0) IS NOT = 1 go to step 1
[2018-01-12 19:38:52.231] (Initialize P2                    :   4) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:52.331] (Initialize P2                    :   4) Wait for 50 ms
[2018-01-12 19:38:52.381] (Initialize P2                    :   4) "P2Status" (1) IS = 1 go to step 4
[2018-01-12 19:38:52.381] (Initialize P2                    :   4) Stop routine
[2018-01-12 19:38:52.381] (Initialize P2                    :   4) @Stop
[2018-01-12 19:38:52.481] (Initialize Syringes              :   2) Wait for Sub-routine "Initialize P2" to change to state "Stop"
[2018-01-12 19:38:52.681] (Initialize Syringes              :   2) @Stop
[2018-01-12 19:38:52.691] (MainPost Routine                 :   0) "Clog_Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:38:52.691] (MainPost Routine                 :   0) "TotalOilUse" = 591
[2018-01-12 19:38:52.691] (MainPost Routine                 :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:38:52.691] (PreFill P1 and P2 before Flush   :  25) @Run
[2018-01-12 19:38:52.691] (PreFill P1 and P2 before Flush   :  25) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:38:52.691] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:52.691] (PreFillP1                        :  26) @Run
[2018-01-12 19:38:52.691] (PreFillP1                        :  26) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:38:52.741] (PreFill P1 and P2 before Flush   :  25) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:38:52.741] (PreFill P1 and P2 before Flush   :  25) Wait for 100 ms
[2018-01-12 19:38:52.741] (PreFillP2                        :  27) @Run
[2018-01-12 19:38:52.741] (PreFillP2                        :  27) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:38:52.841] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:53.111] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:53.161] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:38:53.161] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:53.331] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:53.381] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:38:53.381] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:53.671] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:53.721] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:38:53.721] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:53.971] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:54.021] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:38:54.021] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:54.181] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:54.231] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:38:54.231] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:54.401] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:54.451] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:38:54.451] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:54.741] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:54.791] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:38:54.791] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:54.941] (PreFillP1                        :  26) @Stop
[2018-01-12 19:38:55.041] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:55.091] (PreFill P1 and P2 before Flush   :  25) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:38:55.091] (PreFill P1 and P2 before Flush   :  25) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:55.241] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:55.291] (PreFill P1 and P2 before Flush   :  25) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:38:55.291] (PreFill P1 and P2 before Flush   :  25) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:55.501] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:55.551] (PreFill P1 and P2 before Flush   :  25) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:38:55.551] (PreFill P1 and P2 before Flush   :  25) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:55.701] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:55.751] (PreFill P1 and P2 before Flush   :  25) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:38:55.751] (PreFill P1 and P2 before Flush   :  25) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:55.851] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:55.901] (PreFill P1 and P2 before Flush   :  25) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:38:55.901] (PreFill P1 and P2 before Flush   :  25) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:56.081] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:56.131] (PreFill P1 and P2 before Flush   :  25) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:38:56.131] (PreFill P1 and P2 before Flush   :  25) Set "P2Status" to [Stopped] status
[2018-01-12 19:38:56.321] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:38:56.371] (PreFill P1 and P2 before Flush   :  25) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:38:56.371] (PreFill P1 and P2 before Flush   :  25) Stop routine
[2018-01-12 19:38:56.371] (PreFill P1 and P2 before Flush   :  25) @Stop
[2018-01-12 19:38:56.391] (MainPost Routine                 :   0) Stop Pump
[2018-01-12 19:38:56.421] (PreFillP2                        :  27) @Stop
[2018-01-12 19:38:56.461] (MainPost Routine                 :   0) Start in Reverse at 100 %
[2018-01-12 19:38:56.481] (MainPost Routine                 :   0) Wait for 2000 ms
[2018-01-12 19:38:58.481] (MainPost Routine                 :   0) Stop Pump
[2018-01-12 19:38:58.521] (MainPost Routine                 :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:38:58.521] (Flush Singulator and Capillary   :  28) @Run
[2018-01-12 19:38:58.521] (Flush Singulator and Capillary   :  28) Move Valve to position 1
[2018-01-12 19:38:58.541] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:38:58.591] (Flush Singulator and Capillary   :  28) Move Valve to position 0
[2018-01-12 19:38:58.611] (Flush Singulator and Capillary   :  28) Wait for 250 ms
[2018-01-12 19:38:58.861] (Flush Singulator and Capillary   :  28) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:38:58.861] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:38:58.861] (Flush Capillary                  :  29) @Run
[2018-01-12 19:38:58.861] (Flush Capillary                  :  29) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:38:58.911] (Flush Singulator and Capillary   :  28) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:38:58.911] (Flush Singulator and Capillary   :  28) Wait for 100 ms
[2018-01-12 19:38:58.911] (Flush Singulator                 :  30) @Run
[2018-01-12 19:38:58.911] (Flush Singulator                 :  30) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:38:59.011] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:59.281] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:38:59.331] (Flush Singulator and Capillary   :  28) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:38:59.331] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:59.481] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:38:59.531] (Flush Singulator and Capillary   :  28) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:38:59.531] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:38:59.841] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:38:59.891] (Flush Singulator and Capillary   :  28) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:38:59.891] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:00.141] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:00.191] (Flush Singulator and Capillary   :  28) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:00.191] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:00.341] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:00.391] (Flush Singulator and Capillary   :  28) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:00.391] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:00.561] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:00.611] (Flush Singulator and Capillary   :  28) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:00.611] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:00.901] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:00.951] (Flush Singulator and Capillary   :  28) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:00.951] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:01.001] (Flush Singulator                 :  30) @Stop
[2018-01-12 19:39:01.111] (Flush Capillary                  :  29) @Stop
[2018-01-12 19:39:01.211] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:01.261] (Flush Singulator and Capillary   :  28) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:39:01.261] (Flush Singulator and Capillary   :  28) Set "P2Status" to [Stopped] status
[2018-01-12 19:39:01.361] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:01.411] (Flush Singulator and Capillary   :  28) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:39:01.411] (Flush Singulator and Capillary   :  28) Stop routine
[2018-01-12 19:39:01.411] (Flush Singulator and Capillary   :  28) @Stop
[2018-01-12 19:39:01.421] (MainPost Routine                 :   0) Move Valve to position 0
[2018-01-12 19:39:01.541] (MainPost Routine                 :   0) Wait for 50 ms
[2018-01-12 19:39:01.591] (MainPost Routine                 :   0) Move Valve to position 1
[2018-01-12 19:39:01.611] (MainPost Routine                 :   0) Wait for 100 ms
[2018-01-12 19:39:01.711] (MainPost Routine                 :   0) Start Forward at 100 %
[2018-01-12 19:39:01.731] (MainPost Routine                 :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:39:01.731] (Flush Pickup Tip and Rinse       :  31) @Run
[2018-01-12 19:39:01.731] (Flush Pickup Tip and Rinse       :  31) Move Valve to position 0
[2018-01-12 19:39:01.751] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:01.801] (Flush Pickup Tip and Rinse       :  31) Move Valve to position 1
[2018-01-12 19:39:01.821] (Flush Pickup Tip and Rinse       :  31) Wait for 250 ms
[2018-01-12 19:39:02.071] (Flush Pickup Tip and Rinse       :  31) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:39:02.071] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:02.071] (Flush Pickup Tip                 :  32) @Run
[2018-01-12 19:39:02.071] (Flush Pickup Tip                 :  32) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:39:02.121] (Flush Pickup Tip and Rinse       :  31) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:39:02.121] (Flush Pickup Tip and Rinse       :  31) Wait for 100 ms
[2018-01-12 19:39:02.121] (Rinse Pickup Tip                 :  33) @Run
[2018-01-12 19:39:02.121] (Rinse Pickup Tip                 :  33) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:39:02.221] (Flush Pickup Tip and Rinse       :  31) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:02.401] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:02.451] (Flush Pickup Tip and Rinse       :  31) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:02.451] (Flush Pickup Tip and Rinse       :  31) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:02.701] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:02.751] (Flush Pickup Tip and Rinse       :  31) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:02.751] (Flush Pickup Tip and Rinse       :  31) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:03.071] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:03.121] (Flush Pickup Tip and Rinse       :  31) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:03.121] (Flush Pickup Tip and Rinse       :  31) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:03.371] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:03.421] (Flush Pickup Tip and Rinse       :  31) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:03.421] (Flush Pickup Tip and Rinse       :  31) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:03.571] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:03.621] (Flush Pickup Tip and Rinse       :  31) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:03.621] (Flush Pickup Tip and Rinse       :  31) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:03.691] (Flush Pickup Tip                 :  32) @Stop
[2018-01-12 19:39:03.931] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:03.981] (Flush Pickup Tip and Rinse       :  31) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:39:03.981] (Flush Pickup Tip and Rinse       :  31) Set "P2Status" to [Stopped] status
[2018-01-12 19:39:04.031] (Rinse Pickup Tip                 :  33) @Stop
[2018-01-12 19:39:04.131] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:04.181] (Flush Pickup Tip and Rinse       :  31) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:39:04.181] (Flush Pickup Tip and Rinse       :  31) Stop routine
[2018-01-12 19:39:04.181] (Flush Pickup Tip and Rinse       :  31) @Stop
[2018-01-12 19:39:04.231] (MainPost Routine                 :   0) "PostFlushN" = 1
[2018-01-12 19:39:04.231] (MainPost Routine                 :   0) "PostFlushN" (1) IS NOT <= 0 go to step 7
[2018-01-12 19:39:04.231] (MainPost Routine                 :   0) "TotalOilUse" = 1182
[2018-01-12 19:39:04.231] (MainPost Routine                 :   0) Run Sub Routine "PreFill P1 and P2 before Flush" synchronously
[2018-01-12 19:39:04.231] (PreFill P1 and P2 before Flush   :  25) @Run
[2018-01-12 19:39:04.231] (PreFill P1 and P2 before Flush   :  25) Run Sub Routine "PreFillP1" asynchronously
[2018-01-12 19:39:04.231] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:04.231] (PreFillP1                        :  26) @Run
[2018-01-12 19:39:04.231] (PreFillP1                        :  26) Load carrier with 205 uL at 7500 uL/min (Wait)
[2018-01-12 19:39:04.281] (PreFill P1 and P2 before Flush   :  25) Run Sub Routine "PreFillP2" asynchronously
[2018-01-12 19:39:04.281] (PreFill P1 and P2 before Flush   :  25) Wait for 100 ms
[2018-01-12 19:39:04.281] (PreFillP2                        :  27) @Run
[2018-01-12 19:39:04.281] (PreFillP2                        :  27) Load carrier with 386 uL at 7500 uL/min (Wait)
[2018-01-12 19:39:04.381] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:04.671] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:04.721] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:39:04.721] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:05.011] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:05.061] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:39:05.061] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:05.211] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:05.261] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:39:05.261] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:05.411] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:05.461] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:39:05.461] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:05.771] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:05.821] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:39:05.821] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:06.071] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:06.121] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:39:06.121] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:06.271] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:06.321] (PreFill P1 and P2 before Flush   :  25) "P1Status" (0) IS NOT = 1 go to step 4
[2018-01-12 19:39:06.321] (PreFill P1 and P2 before Flush   :  25) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:06.631] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:06.681] (PreFill P1 and P2 before Flush   :  25) "P1Status" (1) IS = 1 go to step 7
[2018-01-12 19:39:06.681] (PreFill P1 and P2 before Flush   :  25) Set "P2Status" to [Stopped] status
[2018-01-12 19:39:06.731] (PreFillP1                        :  26) @Stop
[2018-01-12 19:39:06.931] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:06.981] (PreFill P1 and P2 before Flush   :  25) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:39:06.981] (PreFill P1 and P2 before Flush   :  25) Set "P2Status" to [Stopped] status
[2018-01-12 19:39:07.081] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:07.131] (PreFill P1 and P2 before Flush   :  25) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:39:07.131] (PreFill P1 and P2 before Flush   :  25) Set "P2Status" to [Stopped] status
[2018-01-12 19:39:07.301] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:07.351] (PreFill P1 and P2 before Flush   :  25) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:39:07.351] (PreFill P1 and P2 before Flush   :  25) Set "P2Status" to [Stopped] status
[2018-01-12 19:39:07.541] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:07.591] (PreFill P1 and P2 before Flush   :  25) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:39:07.591] (PreFill P1 and P2 before Flush   :  25) Set "P2Status" to [Stopped] status
[2018-01-12 19:39:07.741] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:07.791] (PreFill P1 and P2 before Flush   :  25) "P2Status" (0) IS NOT = 1 go to step 7
[2018-01-12 19:39:07.791] (PreFill P1 and P2 before Flush   :  25) Set "P2Status" to [Stopped] status
[2018-01-12 19:39:07.891] (PreFill P1 and P2 before Flush   :  25) Wait for 50 ms
[2018-01-12 19:39:07.941] (PreFill P1 and P2 before Flush   :  25) "P2Status" (1) IS = 1 go to step 10
[2018-01-12 19:39:07.941] (PreFill P1 and P2 before Flush   :  25) Stop routine
[2018-01-12 19:39:07.941] (PreFill P1 and P2 before Flush   :  25) @Stop
[2018-01-12 19:39:07.981] (MainPost Routine                 :   0) Stop Pump
[2018-01-12 19:39:07.991] (PreFillP2                        :  27) @Stop
[2018-01-12 19:39:08.051] (MainPost Routine                 :   0) Start in Reverse at 100 %
[2018-01-12 19:39:08.211] (MainPost Routine                 :   0) Wait for 2000 ms
[2018-01-12 19:39:10.211] (MainPost Routine                 :   0) Stop Pump
[2018-01-12 19:39:10.251] (MainPost Routine                 :   0) Run Sub Routine "Flush Singulator and Capillary" synchronously
[2018-01-12 19:39:10.251] (Flush Singulator and Capillary   :  28) @Run
[2018-01-12 19:39:10.251] (Flush Singulator and Capillary   :  28) Move Valve to position 1
[2018-01-12 19:39:10.271] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:10.321] (Flush Singulator and Capillary   :  28) Move Valve to position 0
[2018-01-12 19:39:10.341] (Flush Singulator and Capillary   :  28) Wait for 250 ms
[2018-01-12 19:39:10.591] (Flush Singulator and Capillary   :  28) Run Sub Routine "Flush Capillary" asynchronously
[2018-01-12 19:39:10.591] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:10.591] (Flush Capillary                  :  29) @Run
[2018-01-12 19:39:10.591] (Flush Capillary                  :  29) Dispense 164 uL at 6000 uL/min (Wait)
[2018-01-12 19:39:10.641] (Flush Singulator and Capillary   :  28) Run Sub Routine "Flush Singulator" asynchronously
[2018-01-12 19:39:10.641] (Flush Singulator and Capillary   :  28) Wait for 100 ms
[2018-01-12 19:39:10.641] (Flush Singulator                 :  30) @Run
[2018-01-12 19:39:10.641] (Flush Singulator                 :  30) Dispense 92 uL at 3375 uL/min (Wait)
[2018-01-12 19:39:10.741] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:11.031] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:11.081] (Flush Singulator and Capillary   :  28) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:11.081] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:11.371] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:11.421] (Flush Singulator and Capillary   :  28) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:11.421] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:11.571] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:11.621] (Flush Singulator and Capillary   :  28) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:11.621] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:11.771] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:11.821] (Flush Singulator and Capillary   :  28) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:11.821] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:11.991] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:12.041] (Flush Singulator and Capillary   :  28) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:12.041] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:12.331] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:12.381] (Flush Singulator and Capillary   :  28) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:12.381] (Flush Singulator and Capillary   :  28) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:12.631] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:12.681] (Flush Singulator and Capillary   :  28) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:39:12.681] (Flush Singulator and Capillary   :  28) Set "P2Status" to [Stopped] status
[2018-01-12 19:39:12.731] (Flush Singulator                 :  30) @Stop
[2018-01-12 19:39:12.831] (Flush Singulator and Capillary   :  28) Wait for 50 ms
[2018-01-12 19:39:12.881] (Flush Singulator and Capillary   :  28) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:39:12.881] (Flush Singulator and Capillary   :  28) Stop routine
[2018-01-12 19:39:12.881] (Flush Singulator and Capillary   :  28) @Stop
[2018-01-12 19:39:12.901] (MainPost Routine                 :   0) Move Valve to position 0
[2018-01-12 19:39:12.931] (Flush Capillary                  :  29) @Stop
[2018-01-12 19:39:12.971] (MainPost Routine                 :   0) Wait for 50 ms
[2018-01-12 19:39:13.021] (MainPost Routine                 :   0) Move Valve to position 1
[2018-01-12 19:39:13.131] (MainPost Routine                 :   0) Wait for 100 ms
[2018-01-12 19:39:13.231] (MainPost Routine                 :   0) Start Forward at 100 %
[2018-01-12 19:39:13.251] (MainPost Routine                 :   0) Run Sub Routine "Flush Pickup Tip and Rinse" synchronously
[2018-01-12 19:39:13.251] (Flush Pickup Tip and Rinse       :  31) @Run
[2018-01-12 19:39:13.251] (Flush Pickup Tip and Rinse       :  31) Move Valve to position 0
[2018-01-12 19:39:13.271] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:13.321] (Flush Pickup Tip and Rinse       :  31) Move Valve to position 1
[2018-01-12 19:39:13.341] (Flush Pickup Tip and Rinse       :  31) Wait for 250 ms
[2018-01-12 19:39:13.591] (Flush Pickup Tip and Rinse       :  31) Run Sub Routine "Flush Pickup Tip" asynchronously
[2018-01-12 19:39:13.591] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:13.591] (Flush Pickup Tip                 :  32) @Run
[2018-01-12 19:39:13.591] (Flush Pickup Tip                 :  32) Dispense 222 uL at 10000 uL/min (Wait)
[2018-01-12 19:39:13.641] (Flush Pickup Tip and Rinse       :  31) Run Sub Routine "Rinse Pickup Tip" asynchronously
[2018-01-12 19:39:13.641] (Flush Pickup Tip and Rinse       :  31) Wait for 100 ms
[2018-01-12 19:39:13.641] (Rinse Pickup Tip                 :  33) @Run
[2018-01-12 19:39:13.641] (Rinse Pickup Tip                 :  33) Dispense 113 uL at 5000 uL/min (Wait)
[2018-01-12 19:39:13.741] (Flush Pickup Tip and Rinse       :  31) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:14.171] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:14.221] (Flush Pickup Tip and Rinse       :  31) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:14.221] (Flush Pickup Tip and Rinse       :  31) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:14.371] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:14.421] (Flush Pickup Tip and Rinse       :  31) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:14.421] (Flush Pickup Tip and Rinse       :  31) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:14.571] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:14.621] (Flush Pickup Tip and Rinse       :  31) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:14.621] (Flush Pickup Tip and Rinse       :  31) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:14.791] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:14.841] (Flush Pickup Tip and Rinse       :  31) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:14.841] (Flush Pickup Tip and Rinse       :  31) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:15.131] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:15.181] (Flush Pickup Tip and Rinse       :  31) "P1Status" (0) IS NOT = 1 go to step 8
[2018-01-12 19:39:15.181] (Flush Pickup Tip and Rinse       :  31) Set "P1Status" to [Stopped] status
[2018-01-12 19:39:15.231] (Flush Pickup Tip                 :  32) @Stop
[2018-01-12 19:39:15.331] (Rinse Pickup Tip                 :  33) @Stop
[2018-01-12 19:39:15.431] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:15.481] (Flush Pickup Tip and Rinse       :  31) "P1Status" (1) IS = 1 go to step 11
[2018-01-12 19:39:15.481] (Flush Pickup Tip and Rinse       :  31) Set "P2Status" to [Stopped] status
[2018-01-12 19:39:15.581] (Flush Pickup Tip and Rinse       :  31) Wait for 50 ms
[2018-01-12 19:39:15.631] (Flush Pickup Tip and Rinse       :  31) "P2Status" (1) IS = 1 go to step 14
[2018-01-12 19:39:15.631] (Flush Pickup Tip and Rinse       :  31) Stop routine
[2018-01-12 19:39:15.631] (Flush Pickup Tip and Rinse       :  31) @Stop
[2018-01-12 19:39:15.651] (MainPost Routine                 :   0) "PostFlushN" = 0
[2018-01-12 19:39:15.651] (MainPost Routine                 :   0) "PostFlushN" (0) IS <= 0 go to step 22
[2018-01-12 19:39:15.651] (MainPost Routine                 :   0) Move Valve to position 0
[2018-01-12 19:39:15.761] (MainPost Routine                 :   0) Wait for 50 ms
[2018-01-12 19:39:15.811] (MainPost Routine                 :   0) Move Valve to position 0
[2018-01-12 19:39:15.831] (MainPost Routine                 :   0) Wait for 100 ms
[2018-01-12 19:39:15.931] (MainPost Routine                 :   0) Start Forward at 100 %
[2018-01-12 19:39:15.951] (MainPost Routine                 :   0) Wait for 60000 ms
[2018-01-12 19:40:15.960] (MainPost Routine                 :   0) Non-Persistent Write to Fluidics Parameter 112 with value 1182
[2018-01-12 19:40:15.980] (MainPost Routine                 :   0) Stop Pump
[2018-01-12 19:40:16.020] (MainPost Routine                 :   0) @Stop
[2018-01-12 19:40:16.360] ** ENDING RUN **
